Since the STOP event handler can use the pausedReason as sent to
qemuProcessStopCPUs, we no longer need to send duplicate suspended
lifecycle events because we know what caused the stop along with extra
details. This processing allows us to also remove the duplicated state
change from qemuProcessStopCPUs.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
qemuMigrationSrcPerform callers expect it to call virDomainObjEndAPI
in any case so on error paths we miss the virDomainObjEndAPI call.
To fix this let's make qemuMigrationSrcPerform callers responsible
for the virDomainObjEndAPI call.
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
qemu added the 'drive-mirror' command in v1.3.0 (d9b902db3fb71fdc)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The VIR_MIGRATE_PARALLEL flag is implemented using QEMU's multifd
migration capability and the corresponding multifd-channels migration
parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
snapshot_conf.h was mixing three separate types: the snapshot
definition, the snapshot object, and the snapshot object list.
Separate out the snapshot object list code into its own file, and
update includes for affected clients.
This is just code motion, but done in preparation of sharing a lot of
the object list code with checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that virStorageSource is a subclass of virObject we can use
virObjectUnref and remove virStorageSourceFree which was a thin wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since virStorageSource is now a subclass of virObject, we can use
VIR_AUTOUNREF instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add virStorageSourceNew and refactor places allocating that structure to
use the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a domain has a disk that is type='network' we require specific
cache mode to allow migration with it (either 'directsync' or
'none'). This doesn't make much sense since network disks are
supposed to be safe to migrate by default.
At the same time, we should be checking for the actual source
type, not apparent type set in the domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:
@ rule1 @
identifier a, b;
@@
- b = a;
...
- a = NULL;
+ VIR_STEAL_PTR(b, a);
Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Currently the job name corresponds to the disk the job belongs to. For
jobs which will not correspond to disks we'll need to track the name
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the data is per-job, we don't really need to bother with
finishing the synchronous job handling if the job is already terminated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of passing in the disk information, pass in the job and name the
function accordingly.
Few callers needed to be modified to have the job pointer handy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The job error can be safely accessed in the job structure, so we don't
need to propagate it through qemuBlockJobUpdateDisk.
Drop the propagation and refactor any caller that pased non-NULL error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The same message is reported in 3 distinct places. Move it out into a
single function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a field tracking the current state of job so that it can be queried
later. Until now the job state e.g. that the job is _READY for
finalizing was tracked only for mirror jobs. Add tracking of state for
all jobs.
Similarly to 'qemuBlockJobType' this maps the existing states of the
blockjob from virConnectDomainEventBlockJobStatus to
'qemuBlockJobState' so that we can track some internal states as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify qemuBlockJobSyncBeginDisk to operate on qemuBlockt sJobDataPtr and
rename it accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can properly track the job type when starting the job so that we
don't have to infer it later.
This patch also adds an enum of block job types specific to qemu
(qemuBlockjobType) which mirrors the public block job types
(virDomainBlockJobType) but allows for other types to be added later
which will not be public.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the job wasn't started, we don't need to end the synchronous job. Add
a note and drop the unnecessary calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than directly modifying fields in the qemuBlockJobDataPtr
structure add a bunch of fields which allow to do the transitions.
This will help later when adding more complexity to the job handling.
APIs introduced in this patch are:
qemuBlockJobDiskNew - prepare for starting a new blockjob on a disk
qemuBlockJobDiskGetJob - get the block job data structure for a disk
For individual job state manipulation the following APIs are added:
qemuBlockJobStarted - Sets the job as started with qemu. Until that
the job can be cancelled without asking qemu.
qemuBlockJobStartupFinalize - finalize job startup. If the job was
started in qemu already, just releases
reference to the job object. Otherwise
clears everything as if the job was never
started.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the disk mirroring startup code from the loop into a separate
function to allow cleaner cleanup paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When cancelling job after a reconnect we can now use the disk block job
state rather than having to re-detect it in the migration code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally we do a 'block-copy' to accomodate non-shared storage
migration but the code did not fill in that the block job was active on
the disk when starting the copy job. Since we handle block jobs finishes
regardless of having it registered it's not a problem but soon will
become one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All the public APIs of the qemu_blockjob module operate on a 'disk'.
Since I'll be adding APIs which operate on a job later let's rename the
existing ones.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If migration is cancelled or confirm phase fails the domain
should be kept on the source even if VIR_MIGRATE_UNDEFINE_SOURCE
was requested.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There are some checks done when parsing a migration cookie. For
instance, one of the checks ensures that the domain is not being
migrated onto the same host. If that is the case, then we are in
big trouble because the @vm is the same domain object used by
source and it has some jobs sets and everything so recovering
from failed cookie parsing would be needlessly hard.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The function currently takes virDomainObjPtr because it's using
both: the domain definition and domain private data.
Unfortunately, this means that in prepare phase we can't parse
migration cookie before putting incoming domain def onto domain
objects list (addressed in the very next commit). Change the
arguments so that virDomainDef and private data are passed
instead of virDomainObjPtr.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There are several functions called in the cleanup path. Some of
them do report error (e.g. qemuDomainRemoveInactiveJob()) which
may result in overwriting an error reported earlier with some
less useful message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The only place where VIR_DOMAIN_EVENT_RESUMED should be generated is the
RESUME event handler to make sure we don't generate duplicate events or
state changes. In the worse case the duplicity can revert or cover
changes done by other event handlers.
For example, after QEMU sent RESUME, BLOCK_IO_ERROR, and STOP events
we could happily mark the domain as running and report
VIR_DOMAIN_EVENT_RESUMED to registered clients.
https://bugzilla.redhat.com/show_bug.cgi?id=1612943
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When a domain is killed on the source host while it is being migrated
and libvirtd is waiting for the migration to finish (waiting for the
domain condition in qemuMigrationSrcWaitForCompletion), the run-time
state including priv->job.current may already be freed once
virDomainObjWait returns with -1. Thus the priv->job.current pointer
cached in jobInfo is no longer valid and setting jobInfo->status may
crash the daemon.
https://bugzilla.redhat.com/show_bug.cgi?id=1593137
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Once we called qemuDomainObjEnterRemote to talk to the destination
daemon during a peer to peer migration, the vm lock is released and we
only hold an async job. If the source domain dies at this point the
monitor EOF callback is allowed to do its job and (among other things)
clear all private data irrelevant for stopped domain. Thus when we call
qemuDomainObjExitRemote, the domain may already be gone and we should
avoid touching runtime private data (such as current job info).
In other words after acquiring the lock in qemuDomainObjExitRemote, we
need to check the domain is still alive. Unless we're doing offline
migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1589730
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The variable is used to store the offline migration capability of the
destination daemon. Let's call it 'dstOffline' so that we can later use
'offline' to indicate whether we were asked to do offline migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
And replace all calls with virObjectEventStateQueue such that:
qemuDomainEventQueue(driver, event);
becomes:
virObjectEventStateQueue(driver->domainEventState, event);
And remove NULL checking from all callers.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The alias of the secret for decrypting the TLS passphrase is useless
besides for TLS setup. Stop passing it around.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This has been broken since commit v4.0.0-165-g93412bb827 which added
jobInfo->statsType enum to distinguish various statistics types. During
migration the type will always be QEMU_DOMAIN_JOB_STATS_TYPE_MIGRATION,
however the destination code consuming the statistics data from
migration cookie failed to properly set the type. So even though
everything was filled in, the type remained *_NONE and any attempt to
fetch the statistics data of a completed migration on the destination
host failed.
https://bugzilla.redhat.com/show_bug.cgi?id=1584071
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Implement the secure way to transport non-shared storage data across
migrations. The new approach uses blockdev-add to create the NBD client
so that the TLS secret object can be specified.
https://bugzilla.redhat.com/show_bug.cgi?id=1300772
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Separate the code relevant for this approach so that we can later add a
second implementation without making the function messy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Drop the mention of 'drive mirror' from the function names and mention
NBD. This will help when adding the 'blockdev mirror' migration code
which will allow using TLS.
Additionally fix some of the function comments to make more sense
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The initiation of a synchronous block job in the NBD storage migration
code was placed after entering the monitor thus after the lock on the VM
object was unlocked. Thankfully nothing bad could happen in this
situation since the migration job prevents any disk detaches or other
modifications of the domain object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The pointer to the qemu driver is already included in domain object's
private data, so does not need to be passed as yet another parameter
when the domain object is already passed.
Also removes parameter 'driver' from functions which had it just because of
qemuBlockJobUpdate.
Signed-off-by: Roland Schulz <schullzroll@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When adding a new object to the domain object list, there should
have been 2 virObjectRef calls made one for each list into which
the object was placed to match the 2 virObjectUnref calls that
would occur during Remove as part of virHashRemoveEntry when
virObjectFreeHashData is called when the element is removed from
the hash table as set up in virDomainObjListNew.
Some drivers (libxl, lxc, qemu, and vz) handled this inconsistency
by calling virObjectRef upon successful return from virDomainObjListAdd
in order to use virDomainObjEndAPI when done with the returned @vm.
While others (bhyve, openvz, test, and vmware) handled this via only
calling virObjectUnlock upon successful return from virDomainObjListAdd.
This patch will "unify" the approach to use virDomainObjEndAPI
for any @vm successfully returned from virDomainObjListAdd.
Because list removal is so tightly coupled with list addition,
this patch fixes the list removal algorithm to return the object
as entered - "locked and reffed". This way, the callers can then
decide how to uniformly handle add/remove success and failure.
This removes the onus on the caller to "specially handle" the
@vm during removal processing.
The Add/Remove logic allows for some logic simplification such
as in libxl where we can Remove the @vm directly rather than
needing to set a @remove_dom boolean and removing after the
libxlDomainObjEndJob completes as the @vm is locked/reffed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the TLS env for migration when starting the NBD server if TLS is
enabled for migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
