After set domain's numa parameters for running domain, save the change,
save the change into live xml is needed to survive restarting the libvirtd,
same story with bug 1146511; meanwihle add call
qemuDomainObjBeginJob/qemuDomainObjEndJob in qemuDomainSetNumaParameters
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
After set the blkio parameters for running domain, save the change into
live xml is needed to survive restarting the libvirtd, same story with
bug 1146511, meanwhile add call qemuDomainObjBeginJob/qemuDomainObjEndJob
in qemuDomainSetBlkioParameters
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
This patch fills in the functionality of
processNicRxFilterChangedEvent(). It now checks if it is appropriate
to respond to the NIC_RX_FILTER_CHANGED event (based on device type
and configuration) and takes appropriate action. Currently it checks
if the guest interface has been configured with
trustGuestRxFilters='yes', and if the host side device is macvtap. If
so, and the MAC address on the guest has changed, the MAC address of
the macvtap device is changed to match.
The result of this is that networking from the guest will continue to
work if the mac address of a macvtap-connected network device is
changed from within the guest, as long as trustGuestRxFilters='yes'
(previously changing the MAC address in the guest would break
networking).
NIC_RX_FILTER_CHANGED is sent by qemu any time a NIC driver in the
guest modified the NIC's RX Filter (for example, if the MAC address of
the NIC is changed by the guest).
This patch doesn't do anything useful with that event; it just sets up
all the plumbing to get news of the event into a worker thread with
all proper locking/reference counting, and provide an easy place to
add in desired functionality.
See src/qemu/EVENTHANDLERS.txt for information/instructions on adding
a libvirt-internal handler for a qemu event (using
NIC_RX_FILTER_CHANGED as an example).
Prior patch removed the need for the virConnectPtr in the unplug
detach host path which caused ripple effect to remove in multiple
callers. The previous patch just left things as ATTRIBUTE_UNUSED -
this patch will remove the variable.
check domain's status before call virQEMUCapsGet to report a accurate
error when domain is shut off
Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=1147847
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Up until now, we set memballoon period in monitor successfully, however
we did not update domain definition structure, thus dumpxml was omitting
period attribute in memballoon element
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140960
When trying to update bandwidth limits on a running domain, limits get
updated in our internal structures, however XML parser reads
bandwidth limits from network 'actual' definition. Committing this patch
it is now available to update bandwidth 'actual' definition as well,
thus updating domain runtime XML.
Management software wants to be able to allocate disk space on demand.
To support this they need keep track of the space occupation of the
block device. This information is reported by qemu as part of block
stats.
This patch extend the block information in the bulk stats with the
allocation information.
To keep the same behaviour a helper is extracted from
qemuMonitorJSONGetBlockExtent in order to get per-device allocation
information.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This removes the artificial and unnecessary restriction that
virDomainSetMaxDowntime() only be called while a migration is in
progress.
https://bugzilla.redhat.com/show_bug.cgi?id=1146618
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The current block stats code matched up the disk name with the actual
stats by the order in the data returned from qemu. This unfortunately
isn't right as qemu may return the disks in any order. Fix this by
returning a hash of stats and index them by the disk alias.
For the new VIR_DOMAIN_EVENT_ID_TUNABLE event we have a bunch of
constants added
VIR_DOMAIN_EVENT_CPUTUNE_<blah>
VIR_DOMAIN_EVENT_BLKDEVIOTUNE_<blah>
This naming convention is bad for two reasons
- There is no common prefix unique for the events to both
relate them, and distinguish them from other event
constants
- The values associated with the constants were chosen
to match the names used with virConnectGetAllDomainStats
so having EVENT in the constant name is not applicable in
that respect
This patch proposes renaming the constants to
VIR_DOMAIN_TUNABLE_CPU_<blah>
VIR_DOMAIN_TUNABLE_BLKDEV_<blah>
ie, given them a common VIR_DOMAIN_TUNABLE prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the universal tunable event to report changes to user. All
blkdeviotune values are prefixed with "blkdeviotune".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When you updated some blkdeviotune values for running domain the values
were stored only internally, but not saved into the live XML so they
won't survive restarting the libvirtd.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Request erroring out from the backing chain traveller and drop qemu's
internal backing chain integrity tester.
The backing chain traveller reports errors by itself with possibly more
detail than qemuDiskChainCheckBroken ever could.
We also need to make sure that we reconnect to existing qemu instances
even at the cost of losing the backing chain info (this really should be
stored in the XML rather than reloaded from disk, but that needs some
work).
Now we have universal tunable event so we can use it for reporting
changes to user. The cputune values will be prefixed with "cputune" to
distinguish it from other tunable events.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add a new parameter that will allow to return the XML stored in the save
image for further manipulation and adjust the callers. This option will
be used in later patches.
We are not detecting the presence of FIPS from QEMU, but from procfs and
that means it's not QEMU capability. It was decided that we will pass
this flag to QEMU even if it's not supported by old QEMU binaries.
This patch also reverts changes done by commit a21cfb0f to
qemucapabilitestest and implements a new test case in qemuxml2argvtest.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135431
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit f05b6a91 added virQEMUDriverConfigPtr argument to the
virQEMUCapsFillDomainCaps function and it uses forward declaration
of virQEMUDriverConfig and virQEMUDriverConfigPtr that casues clang
build to fail:
gmake[3]: Entering directory `/usr/home/novel/code/libvirt/src'
CC qemu/libvirt_driver_qemu_impl_la-qemu_capabilities.lo
In file included from qemu/qemu_capabilities.c:43:
In file included from qemu/qemu_hostdev.h:27:
qemu/qemu_conf.h:63:37: error: redefinition of typedef 'virQEMUDriverConfig'
is a C11 feature [-Werror,-Wtypedef-redefinition]
typedef struct _virQEMUDriverConfig virQEMUDriverConfig;
^
qemu/qemu_capabilities.h:328:37: note: previous definition is here
typedef struct _virQEMUDriverConfig virQEMUDriverConfig;
^
Fix that by passing loader and nloader config attributes directly
instead of passing complete config.
Clean up all _virDomainMemoryStat.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainBlockStats.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainInterfaceStats.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Live definition was used to look up the disk index while persistent one
was indexed leading to a crash in qemuDomainGetBlockIoTune. Use the
correct def and report a nice error.
Unfortunately it's accessible via read-only connection, though it can
only crash libvirtd in the cases where the guest is hot-plugging disks
without reflecting those changes to the persistent definition. So
avoiding hotplug, or doing hotplug where persistent is always modified
alongside live definition, will avoid the out-of-bounds access.
Introduced in: eca96694a7f992be633d48d5ca03cedc9bbc3c9aa (v0.9.8)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140724
Reported-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_BLOCK group of statistics.
To do so, a helper function to get the block stats of all the disks of
a domain is added.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_INTERFACE group of
statistics.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_VCPU group of statistics. To
do so, this patch also extracts a helper to gather the vCPU information.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_CPU_TOTAL group of
statistics.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Future patches which will implement more bulk stats groups for QEMU will
need to access the connection object.
To accommodate that, a few changes are needed:
* enrich internal prototype to pass qemu driver object
* add per-group flag to mark if one collector needs monitor access or not
* If at least one collector of the requested stats needs monitor access
we must start a query job for each domain. The specific collectors
will run nested monitor jobs inside that.
* If the job can't be acquired we pass flags to the collector so
specific collectors that need monitor access can be skipped in order
to gather as much data as is possible.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Check to see if the UEFI binary mentioned in qemu.conf actually
exists, and if so expose it in domcapabilities like
<loader ...>
<value>/path/to/ovmf</value>
</loader>
We introduce some generic domcaps infrastructure for handling
a dynamic list of string values, it may be of use for future bits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Up till now the virQEMUCapsFillDomainCaps() was type of void as
there was no way for it to fail. This is, however, going to
change in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit b606bbb4 broke reporting of errors when setting of guest time
fails via the guest agent as the return value is not checked and later
overwritten by the return value qemuMonitorRTCResetReinjection();
Fix this by checking the return value before resetting the RTC
reinjection.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1142294
Modify qemuProcessStart() in order to allowing setting affinity to
specific CPU's for IOThreads. The process followed is similar to
that for the vCPU's.
This involves adding a function to fetch the IOThread id's via
qemuMonitorGetIOThreads() and adding them to iothreadpids[] list.
Then making sure all the cgroup data has been properly set up and
finally assigning affinity.
We stupidly modeled block job bandwidth after migration
bandwidth, which in turn was an 'unsigned long' and therefore
subject to 32-bit vs. 64-bit interpretations. To work around
the fact that 10-gigabit interfaces are possible but don't fit
within 32 bits, the original interface took the number scaled
as MiB/sec. But this scaling is rather coarse, and it might
be nice to tune bandwidth finer than in megabyte chunks.
Several of the block job calls that can set speed are fed
through a common interface, so it was easier to adjust them all
at once. Note that there is intentionally no flag for the new
virDomainBlockCopy; there, since the API already uses a 64-bit
type always, instead of a possible 32-bit type, and is brand
new, it was easier to just avoid scaling issues. As with the
previous patch that adjusted the query side (commit db33cc24),
omitting the new flag preserves old behavior, and the
documentation now mentions limits of what happens when a 32-bit
machine is on either client or server side.
* include/libvirt/libvirt.h.in (virDomainBlockJobSetSpeedFlags)
(virDomainBlockPullFlags)
(VIR_DOMAIN_BLOCK_REBASE_BANDWIDTH_BYTES)
(VIR_DOMAIN_BLOCK_COMMIT_BANDWIDTH_BYTES): New enums.
* src/libvirt.c (virDomainBlockJobSetSpeed, virDomainBlockPull)
(virDomainBlockRebase, virDomainBlockCommit): Document them.
* src/qemu/qemu_driver.c (qemuDomainBlockJobSetSpeed)
(qemuDomainBlockPull, qemuDomainBlockRebase)
(qemuDomainBlockCommit, qemuDomainBlockJobImpl): Support new flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Upstream qemu 1.4 added some drive-mirror tunables not present
when it was first introduced in 1.3. Management apps may want
to set these in some cases (for example, without tuning
granularity down to sector size, a copy may end up occupying
more bytes than the original because an entire cluster is
copied even when only a sector within the cluster is dirty,
although tuning it down results in more CPU time to do the
copy). I haven't personally needed to use the parameters, but
since they exist, and since the new API supports virTypedParams,
we might as well expose them.
Since the tuning parameters aren't often used, and omitted from
the QMP command when unspecified, I think it is safe to rely on
qemu 1.3 to issue an error about them being unsupported, rather
than trying to create a new capability bit in libvirt.
Meanwhile, all versions of qemu from 1.4 to 2.1 have a bug where
a bad granularity (such as non-power-of-2) gives a poor message:
error: internal error: unable to execute QEMU command 'drive-mirror': Invalid parameter 'drive-virtio-disk0'
because of abuse of QERR_INVALID_PARAMETER (which is supposed to
name the parameter that was given a bad value, rather than the
value passed to some other parameter). I don't see that a
capability check will help, so we'll just live with it (and it
has since been improved in upstream qemu).
* src/qemu/qemu_monitor.h (qemuMonitorDriveMirror): Add
parameters.
* src/qemu/qemu_monitor.c (qemuMonitorDriveMirror): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDriveMirror):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDriveMirror):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCopyCommon): Likewise.
(qemuDomainBlockRebase, qemuDomainBlockCopy): Adjust callers.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Likewise.
* tests/qemumonitorjsontest.c (qemuMonitorJSONDriveMirror): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The hard part of managing the disk copy is already coded; all
this had to do was convert the XML and virTypedParameters into
the internal representation.
With this patch, all blockcopy operations that used the old
API should also work via the new API. Additional extensions,
such as supporting the granularity tunable or a network rather
than file destination, will be added as later patches.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): New function.
Signed-off-by: Eric Blake <eblake@redhat.com>
In order to implement the new virDomainBlockCopy, the existing
block copy internal implementation needs to be adjusted. The
new function will parse XML into a storage source, and parse
typed parameters into integers, then call into the same common
backend. For now, it's easier to keep the same implementation
limits that only local file destinations are suported, but now
the check needs to be explicit. Similar to qemuDomainBlockJobImpl
consuming 'vm', this code also consumes the caller's 'mirror'
description of the destination.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Rename...
(qemuDomainBlockCopyCommon): ...and adjust parameters.
(qemuDomainBlockRebase): Adjust caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
When a domain is undefined, there are options to remove it's
managed save state or snapshots. However, there's another file
that libvirt creates per domain: the NVRAM variable store file.
Make sure that the file is not left behind if the domain is
undefined.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Test suites using the port allocator don't want to have different
behaviour depending on whether a port is in use on the host. Add
a VIR_PORT_ALLOCATOR_SKIP_BIND_CHECK which test suites can use
to skip the bind() test. The port allocator will thus only track
ports in use by the test suite process itself. This is fine when
using the port allocator to generate guest configs which won't
actually be launched
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Coverity notes that if the virConnectListAllDomains returns a negative
value then the loop at the cleanup label that ends on numDomains will
have issues.
Signed-off-by: John Ferlan <jferlan@redhat.com>
