We support omitting listen attribute of graphics element so we should
also support omitting address attribute of listen element. This patch
also updates libvirt to always add a listen element into domain XML
except for VNC graphics if socket attribute is specified.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Trying to define a domain name containing an embedded '/'
will immediately fail when trying to write the XML to disk for
our stateful drivers. This patch explicitly rejects names
containing a '/', and provides an xmlopt feature for drivers
to avoid this validation check, which is enabled in every
non-stateful driver that already has xmlopt handling wired up.
(Technically this could reject a previously accepted vmname like
'/foo', however at least for the qemu driver that falls over
later when starting qemu)
https://bugzilla.redhat.com/show_bug.cgi?id=639923
Modeled after the qemuDomainDiskPrivatePtr logic, create a privateData
pointer in the _virDomainHostdevDef to allow storage of private data
for a hypervisor in order to at least temporarily store auth/secrets
data for usage during qemuBuildCommandLine.
NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the auth/secret data, there's no need to add
code to handle this new structure there.
Updated copyrights for modules touched. Some didn't have updates in a
couple years even though changes have been made.
Signed-off-by: John Ferlan <jferlan@redhat.com>
GCC in RHEL-6 complains about listen:
../../src/conf/domain_conf.c:23718: error: declaration of 'listen' shadows a global declaration [-Wshadow]
/usr/include/sys/socket.h:204: error: shadowed declaration is here [-Wshadow]
This renames all the listen to gListen.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This effectively removes virDomainGraphicsListenSetAddress which was
used only to change the address of listen structure and possible change
the listen type. The new function will auto-expand the listens array
and append a new listen.
The old function was used on pre-allocated array of listens and in most
cases it only "add" a new listen. The two remaining uses can access the
listen structure directly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.
The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.
While trying to build with -Os couple of compile errors showed
up.
conf/domain_conf.c: In function 'virDomainChrRemove':
conf/domain_conf.c:13666:24: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
virDomainChrDefPtr ret, **arrPtr = NULL;
^
Compiler fails to see that @ret is used only if set in the loop,
but whatever, there's no harm in initializing the variable.
In vboxAttachDrivesNew and _vboxAttachDrivesOld compiler thinks
that @rc may be used uninitialized. Well, not directly, but maybe
after some optimization. Yet again, no harm in initializing a
variable.
In file included from ./util/virthread.h:26:0,
from ./datatypes.h:28,
from vbox/vbox_tmpl.c:43,
from vbox/vbox_V3_1.c:37:
vbox/vbox_tmpl.c: In function '_vboxAttachDrivesOld':
./util/virerror.h:181:5: error: 'rc' may be used uninitialized in this function [-Werror=maybe-uninitialized]
virReportErrorHelper(VIR_FROM_THIS, code, __FILE__, \
^
In file included from vbox/vbox_V3_1.c:37:0:
vbox/vbox_tmpl.c:1041:14: note: 'rc' was declared here
nsresult rc;
^
Yet again, one uninitialized variable:
qemu/qemu_driver.c: In function 'qemuDomainBlockCommit':
qemu/qemu_driver.c:17194:9: error: 'baseSource' may be used uninitialized in this function [-Werror=maybe-uninitialized]
qemuDomainPrepareDiskChainElement(driver, vm, baseSource,
^
And another one:
storage/storage_backend_logical.c: In function 'virStorageBackendLogicalMatchPoolSource.isra.2':
storage/storage_backend_logical.c:618:33: error: 'thisSource' may be used uninitialized in this function [-Werror=maybe-uninitialized]
thisSource->devices[j].path))
^
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After 457ff97fa there are two defects in our code. In both of
them we use a signed variable to hold up a number of snapshots
that domain has. We use a helper function to count the number.
However, the helper function may fail in which case it returns
a negative one and control jumps to cleanup label where an
unsigned variable is used to iterate over array of snapshots. The
loop condition thus compare signed and unsigned variables which
in this specific case ends up badly for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Checking whether x > 0 before looping over [0..x] items doesn't make
sense and multi-line body must have curly brackets around it.
Best viewed with '-w'.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Allocate it as soon as we know we will need it.
Add it to def->ngraphics if it's allocated, removing the need
to use the addDesktop and totalPresent variables to track this.
Separate allocation of the def->graphics array from the allocation
and initialization of its first element.
Note that the only possible values of totalPresent at this point
are 0 or 1, because it equals to guiPresent + sdlPresent.
When FRONTEND/Type is not any of "sdl", "gui", "vrdp", we add a DESKTOP.
Use a bool to track this, instead of checking that both
totalPresent ("sdl" or "gui" present) and vrdpPresent are zero.
The virDomainSnapshotDefFormat calls into virDomainDefFormat,
so should be providing a non-NULL virCapsPtr instance. On the
qemu driver we change qemuDomainSnapshotWriteMetadata to also
include caps since it calls virDomainSnapshotDefFormat.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Allowing to have the extra undefined/default state.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_CPU_PATH which is a
derivative of SYSFS_SYSTEM_PATH
Use cpupath for nodeCapsInitNUMAFake and remove SYSFS_CPU_PATH
If the virStringSearch() returns a 0 (zero), then each of the uses
of the call will just jump to cleanup forgetting to free the returned
empty list. Expand the scope a bit of each use and free at cleanup.
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
Since the holdtime is not supported by VBOX SDK, it's being simulated
by sleeping before sending the key-up codes. The key-up codes are
auto-generated based on XT codeset rules (adding of 0x80 to key-down)
which results in the same behavior as for QEMU implementation.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
Wikipedia's list of common misspellings [1] has a machine-readable
version. This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched. The list of changes was manually re-checked for false
positives.
[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
For VBOX it's most likely that the connection is vbox:///session and it
runs with local non-root account. This caused permission denied when
LOCALSTATEDIR was used to create temp file. This patch makes use of the
virGetUserCacheDirectory to address this problem for non-root users.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Return 0 instead of ERR_NO_SUPPORT in each driver
where we don't support managed save or -1 if
the domain does not exist.
This avoids spamming daemon logs when 'virsh dominfo' is run.
https://bugzilla.redhat.com/show_bug.cgi?id=1095637
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
Since virDomainFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
The CreateHardDiskMedium only support create HardDisk for medium
type, and it only works when vbox version >= 3.1. This patch make
the function workable with all vbox versions and rename it as
CreateHardDisk.
In vbox 2.2 and 3.0 this function will create a IHardDisk object.
In vbox later than 3.0, this function will create a IMedium object.
In old version, function FindMedium in UIVirtualBox doesn't work
for vbox2.2 and 3.0. We assume it will not be used when vbox in
these versions.
But when rewriting vboxStorageVolLookupByPath, we found it was
compatibe to use FindMedium to get a IHardDisk object, even in
vbox old versions. To achieve this, first make FindMedium call
FindHardDisk when VBOX_API_VERSION < 4000000.
Then change the argument type **IMedium to **IHardDisk. (As the
rules in heriachy, we can't transfer a IHardDisk to match
IMedium in output)
In vbox 2.2 and 3.0, the caller must be aware that they will get
a IHardDisk object in return.
There are lots of macro declarations in vbox_common.c,
vbox_network.c, and the coming vbox_storage.c which simply the API
calling. Since they are totally the same. We shouldn't keep three
copies of that, so they are moved to vbox_common.h.
Note: The macros are quite different from those in vbox_tmpl.c,
because they are using different API.
We should follow the rules that CHECK macro only do checking works.
But this VBOX_OBJECT_CHECK and VBOX_OBJECT_HOST_CHECK declared some
varibles at the same time, which broke the rule. So the patch
removed this macros and dispatched it in source code.
The storage driver is still not rewriten at this point. So, I
remains the VBOX_OBJECT_CHECK macro in vbox_tmpl.c. But this will
finally be removed in patch 'vbox: Remove unused things in vbox_tmpl.c'
I made a mistake on copyright in patch 7f0f415b87.
If I copied codes from one file to another, I should copy the
copyright announcement as well. So this patch makes up the
copyright which I should have added in the previous patch.
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
The patch dbb4cbf532 by Michal has splited the vbox driver into
three parties. This modification brings a more suitable interface
to the previous patch.
The new function vboxGetDriver is introduced to get the
corresponding vbox domain driver directly thought the vbox version.
Functions like vboxGetNetworkDriver and vboxGetStorageDriver
will be introduced after rewriting it's drivers.
This patch, by the way, fixed the align problem for vbox in
Makefile.am
Handle a few places where Coverity complains about the value being
unused. For two of them (Close cases) - the comments above the close
indicate there is no harm to ignore the error - so added an ignore_value.
For the other condition, added an rc check like other callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.
Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files
The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Our style overwhelmingly uses hanging braces (the open brace
hangs at the end of the compound condition, rather than on
its own line), with the primary exception of the top level function
body. Fix the few remaining outliers, before adding a syntax
check in a later patch.
* src/interface/interface_backend_netcf.c (netcfStateReload)
(netcfInterfaceClose, netcf_to_vir_err): Correct use of { in
compound statement.
* src/conf/domain_conf.c (virDomainHostdevDefFormatSubsys)
(virDomainHostdevDefFormatCaps): Likewise.
* src/network/bridge_driver.c (networkAllocateActualDevice):
Likewise.
* src/util/virfile.c (virBuildPathInternal): Likewise.
* src/util/virnetdev.c (virNetDevGetVirtualFunctions): Likewise.
* src/util/virnetdevmacvlan.c
(virNetDevMacVLanVPortProfileCallback): Likewise.
* src/util/virtypedparam.c (virTypedParameterAssign): Likewise.
* src/util/virutil.c (virGetWin32DirectoryRoot)
(virFileWaitForDevices): Likewise.
* src/vbox/vbox_common.c (vboxDumpNetwork): Likewise.
* tests/seclabeltest.c (main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.
This patch focuses on drivers that had several issues.
* src/lxc/lxc_fuse.c (lxcProcGetattr, lxcProcReadMeminfo): Correct
use of {}.
* src/lxc/lxc_driver.c (lxcDomainMergeBlkioDevice): Likewise.
* src/phyp/phyp_driver.c (phypConnectNumOfDomainsGeneric)
(phypUUIDTable_Init, openSSHSession, phypStoragePoolListVolumes)
(phypConnectListStoragePools, phypDomainSetVcpusFlags)
(phypStorageVolGetXMLDesc, phypStoragePoolGetXMLDesc)
(phypConnectListDefinedDomains): Likewise.
* src/vbox/vbox_common.c (vboxAttachSound, vboxDumpDisplay)
(vboxDomainRevertToSnapshot, vboxDomainSnapshotDelete): Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolGetXMLDesc): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Four functions are rewrite in this patch, that is:
vboxNodeGetInfo
vboxNodeGetCellsFreeMemory
vboxNodeGetFreeMemory
vboxNodeGetFreePages
Since these functions has nothing to do with vbox,
it can be directly moved to vbox_common.c. So, I
merged these things into one patch.
The vboxDomainSnapshotCreateXML integrated the snapshot redefine
with this patch:
http://www.redhat.com/archives/libvir-list/2014-May/msg00589.html
This patch introduced vboxSnapshotRedefine in vboxUniformedAPI to
enable the features.
This patch replace all version specified APIs to the uniformed api,
then, moving the whole implementation to vbox_common.c. As there
is only API level changes, the behavior of the function doesn't
change.
Some old version's defects has brought to the new one. The already
known things are:
*goto cleanup in a loop without releasing the pointers in the
loop.
*When function failed after machine unregister, no roll back
to recovery it and the virtual machine would disappear.
