Similarly to other disk-related stuff, the index is useful when you want
to refer to the image in APIs such as virDomainSetBlockThreshold.
For internal use we also need to parse it inside of the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since Xen 4.2 libxl expects device_model_override="/path" instead of
device_model="/path". Adjust the code to parse this as <emulator>.
While libxl also recognizes device_model_version="", this knob is not
required for libvirt. A runtime detection exists in libvirt to select
either "qemu-xen" or "qemu-xen-traditional".
Since qemu-xen-traditional is marked as supported just for stubdoms
there is no need to handle it.
Test data files with 'device_model' were adjusted to use
'device_model_override' instead.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Attempting to create a lxc domain with <seclabel type='none'/> fails
virsh --connect lxc:/// create distro_nosec.xml
error: Failed to create domain from distro_nosec.xml
error: unsupported configuration: Security driver model '(null)' is not available
Commit 638ffa2228 adjusted the logic for setting a driver's default
security model.
The lxc driver does not set a default security driver model in the XML
parser config, causing seclabels of type='none' to have a null model.
The lxc driver's security manager is initialized in lxcStateInitialize()
by calling lxcSecurityInit(). Use the model of this manager as the
default in the XML parser config.
For the record, this is a regression caused by commit 638ffa2228, which
changed the logic for setting a driver's default security model. The
qemu driver was adjusted accordingly, but a similar change was missed
in the lxc driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainAlignMemorySizes() has an operation order problem. We are
calculating 'initialmem' without aligning the memory modules first.
Since we're aligning the dimms afterwards this can create inconsistencies
in the end result. x86 has alignment of 1-2MiB and it's not severely
impacted by it, but pSeries works with 256MiB alignment and the difference
is noticeable.
This is the case of the existing 'memory-hotplug-ppc64-nonuma' test.
The test consists of a 2GiB (aligned value) guest with 2 ~520MiB dimms,
both unaligned. 'initialmem' is calculated by taking total_mem and
subtracting the dimms size (via virDomainDefGetMemoryInitial()), which
wil give us 2GiB - 520MiB - 520MiB, ending up with a little more than
an 1GiB of 'initialmem'. Note that this value is now unaligned, and
will be aligned up via VIR_ROUND_UP(), and we'll end up with 'initialmem'
of 1GiB + 256MiB. Given that the dimms are aligned later on, the end
result for QEMU is that the guest will have a 'mem' size of 1310720k,
plus the two 512 MiB dimms, exceeding in 256MiB the desired 2GiB
memory and currentMemory specified in the XML.
Existing guests can't be fixed without breaking ABI, but we have
code already in place to align pSeries NVDIMM modules for new guests.
Let's extend it to align all pSeries mem modules.
A new test, 'memory-hotplug-ppc64-nonuma-abi-update', a copy of the
existing 'memory-hotplug-ppc64-nonuma', was added to demonstrate the
result for new pSeries guests. For the same unaligned XML mentioned
above, after applying this patch:
- starting QEMU mem size without PARSE_ABI_UPDATE:
-m size=1310720k,slots=16,maxmem=4194304k \ (no changes)
- starting QEMU mem size with PARSE_ABI_UPDATE:
-m size=1048576k,slots=16,maxmem=4194304k \ (size fixed)
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A previous patch removed the pSeries NVDIMM align that wasn't
being done properly. This patch reintroduces it in the right
fashion, making it reliant on VIR_DOMAIN_DEF_PARSE_ABI_UPDATE.
This makes it complying with the intended design defined by
commit c7d7ba85a6.
Since the PARSE_ABI_UPDATE is more restrictive than checking for
!migrate && !snapshot, like is being currently done with
qemuDomainAlignMemorySizes(), this means that we'll align the
pSeries NVDIMMs in two places - in post parse time for new
guests, and in qemuDomainAlignMemorySizes() for all guests
that aren't migrating or in a snapshot.
Another difference is that the logic is now in the QEMU driver
instead of domain_conf.c. This was necessary because all
considerations made about the PARSE_ABI_UPDATE flag were done
under QEMU. Given that no other driver supports ppc64 there is no
impact in this change.
A new test was added to exercise what we're doing. It consists
of a a copy of the existing 'memory-hotplug-nvdimm-ppc64' xml2xml
test, called with the PARSE_ABI_UPDATE flag. As intended, we're
not changing QEMU command line or any XML without the flag,
while the pseries NVDIMM memory is being aligned when the
flag is used.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The code to align ppc64 NVDIMMs on post parse was introduced in
commit d3f3c2c97f. That commit failed to realize that we
can't align memory unconditionally. As of commit c7d7ba85a6
("qemu: command: Align memory sizes only on fresh starts"),
all memory alignment should be executed only when we're not
migrating or in a snapshot.
This revert does not break any guests in the wild, given that
ppc64 NVDIMMs are still being aligned in qemuDomainAlignMemorySizes().
Next patch will introduce a mechanism where we can have post
parse NVDIMM alignment for pSeries without breaking the
intended design, as defined by c7d7ba85a6.
This reverts commit d3f3c2c97f.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Conditionalize code which assumes that the domain definition stored in
the checkpoint is present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We can leave out things like USB controller, memballoon device,
kernel and initrd since they're not the focus of the tests.
Propagating some information from the output files back to the
input files makes it easier to compare them, as it reduces the
resulting diff, and in the case of the qemuxml2xml test for
memory-hotplug-ppc64-nonuma it allows us to convert the output
file into a symlink, since in the specific case the XML doesn't
change at all.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The ppc64 tests
memory-hotplug-ppc64-nonuma
memory-hotplug-nvdimm-ppc64
are not passed the same information for qemuxml2argv and
qemuxml2xml tests; the former, in particular, doesn't show up
at all in qemuxml2xml. Address this inconsistency.
Note that one of the new output files had been introduced with
5540acb9a2 despite not being actually used as of that commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
At this moment, it is not possible to create a test specifying
ARG_PARSEFLAGS because info->parseFlags is not being forwarded to
testCompareDomXML2XMLFiles(). Let's fix it now so next patch can
make use of it.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Let's pass along / fill @niothreads rather than trying to make dual
use as a return value and thread count.
This resolves a Coverity issue detected in qemuDomainGetIOThreadsMon
where if qemuDomainObjExitMonitor failed, then a -1 was returned and
overwrite @niothreads causing a memory leak.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Glib provides g_auto(GStrv) which is in-place replacement of our
VIR_AUTOSTRINGLIST.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the function along with helpers for caching the reply and tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While for virQEMUCapsNew this should not be needed
(the possible failures in VIR_CLASS_NEW are only hit
on bad API usage which we don't do here),
virQEMUCapsNewCopy calls into many other functions,
some of which actually fail.
Check the return value of both.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
guest-get-disks is available since QEMU 5.2:
https://wiki.qemu.org/ChangeLog/5.2#Guest_agent
Note that the test response was manually edited based on a reply on my
bare-metal computer. It shows partial results due to pcieport driver not
being currently supported by QGA.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
qemucapsprobemock can't find real versions of qemuMonitorSend() and
qemuMonitorJSONIOProcessLine() on macOS. That breaks qemucapsprobe.
The failure can be explained by documented behaviour of dlsym(3) on
macOS:
If dlsym() is called with the special handle RTLD_NEXT, then dyld
searches for the symbol in the dylibs the calling image linked against
when built.
[...] For flat linked images, the search starts in the load ordered
list of all images, in the image right after the caller's image.
That means qemucapsprobemock must be linked against qemu test driver to
find symbols there with RTLD_NEXT.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There might be mocks that need to reference qemu test driver and link
with it. It's not possible now because qemu test driver is defined after
mocks.
While at it, add 'link_with' parameter to mock definition that allows to
specify a set of libraries the mock has to be linked with.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test takes 40+ seconds on MBP 2012, MBA 2015. Cirrus completes the
test within default timeout, just above 29 seconds but the error margin
is narrow, under a second.
It'd be good to provide reasonable default timeout to avoid test suite
failure if "meson test" is invoked without arguments.
Closes https://gitlab.com/libvirt/libvirt/-/issues/58
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some tests in qemuxml2argvtest need opendir() from virpcimock, others
need opendir() from virfilewrapper.
But as of now, only opendir() from virpcimock has an effect.
real_opendir in virpcimock has a pointer to opendir$INODE64 in
libsystem_kernel.dylib instead of pointing to opendir$INODE64 in
qemuxml2argvtest (from virfilewrapper). And because the second one is
never used, tests that rely on prefixes added by virFileWrapperAddPrefix
fail.
That can be fixed if dlsym(3) is asked explicitly to search symbols in
main executable with RTLD_MAIN_ONLY before going to other dylibs.
Existing RTLD_NEXT handle results into libsystem_kernel.dylib being
searched before main executable.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
opendir() mocks need to search for decorated function with $INODE64
suffix, like stat mocks.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
When libvirt added support for firewalld, we were unable to use
firewalld's higher level rules, because they weren't detailed enough
and could not be applied to the iptables FORWARD or OUTPUT chains
(only to the INPUT chain). Instead we changed our code so that rather
than running the iptables/ip6tables/ebtables binaries ourselves, we
would send these commands to firewalld as "passthrough commands", and
firewalld would run the appropriate program on our behalf.
This was done under the assumption that firewalld was somehow tracking
all these rules, and that this tracking was benefitting proper
operation of firewalld and the system in general.
Several years later this came up in a discussion on IRC, and we
learned from the firewalld developers that, in fact, adding iptables
and ebtables rules with firewalld's passthrough commands actually has
*no* advantage; firewalld doesn't keep track of these rules in any
way, and doesn't use them to tailor the construction of its own rules.
Meanwhile, users have been complaining for some time that whenever
firewalld is restarted on a system with libvirt virtual networks
and/or nwfilter rules active, the system logs would be flooded with
warning messages whining that [lots of different rules] could not be
deleted because they didn't exist. For example:
firewalld[3536040]: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w10 -w --table filter --delete LIBVIRT_OUT
--out-interface virbr4 --protocol udp --destination-port 68
--jump ACCEPT' failed: iptables: Bad rule
(does a matching rule exist in that chain?).
(See https://bugzilla.redhat.com/1790837 for many more examples and a
discussion)
Note that these messages are created by iptables, but are logged by
firewalld - when an iptables/ebtables command fails, firewalld grabs
whatever is in stderr of the program, and spits it out to the system
log as a warning. We've requested that firewalld not do this (and
instead leave it up to the calling application to do the appropriate
logging), but this request has been respectfully denied.
But combining the two problems above ( 1) firewalld doesn't do
anything useful when you use it as a proxy to add/remove iptables
rules, 2) firewalld often insists on logging lots of
annoying/misleading/useless "error" messages when you use it as a
proxy to remove iptables rules that don't already exist), leads to a
solution - simply stop using firewalld to add and remove iptables
rules. Instead, exec iptables/ip6tables/ebtables directly in the same
way we do when firewalld isn't active.
We still need to keep track of whether or not firewalld is active, as
there are some things that must be done, e.g. we need to add some
actual firewalld rules in the firewalld "libvirt" zone, and we need to
take notice when firewalld restarts, so that we can reload all our
rules.
This patch doesn't remove the infrastructure that allows having
different firewall backends that perform their functions in different
ways, as that will very possibly come in handy in the future when we
want to have an nftables direct backend, and possibly a "pure"
firewalld backend (now that firewalld supports more complex rules, and
can add those rules to the FORWARD and OUTPUT chains). Instead, it
just changes the action when the selected backend is "firewalld" so
that it adds rules directly rather than through firewalld, while
leaving as much of the existing code intact as possible.
In order for tests to still pass, virfirewalltest also had to be
modified to behave in a different way (i.e. by capturing the generated
commandline as it does for the DIRECT backend, rather than capturing
dbus messages using a mocked dbus API).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This test was created with all the commandlines erroneously having
"--source-host", which is not a valid iptables option. The correct
name for the option is "--source". However, since the test is just
checking that the generated commandline matches what we told it to
generate (and never actually runs iptables, as that would be a "Really
Bad Idea"(tm)), the test has always succeeded. I only found it because
I made a change to the code that caused the test to incorrectly try to
run iptables during the test, and the error message I received was
"odd" (it complained about the bad option, rather than complaining
that I had insufficient privilege to run the command).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
iptables and ip6tables have had a "-w" commandline option to grab a
systemwide lock that prevents two iptables invocations from modifying
the iptables chains since 2013 (upstream commit 93587a04 in
iptables-1.4.20). Similarly, ebtables has had a "--concurrent"
commandline option for the same purpose since 2011 (in the upstream
ebtables commit f9b4bcb93, which was present in ebtables-2.0.10.4).
Libvirt added code to conditionally use the commandline option for
iptables/ip6tables in upstream commit ba95426d6f (libvirt-1.2.0,
November 2013), and for ebtables in upstream commit dc33e6e4a5
(libvirt-1.2.11, November 2014) (the latter actually *re*-added the
locking for iptables/ip6tables, as it had accidentally been removed
during a refactor of firewall code in the interim).
I say "conditionally" because a check was made during firewall module
initialization that tried executing a test command with the
-w/--concurrent option, and only continued using it for actual
commands if that test command completed successfully. At the time the
code was added this was a reasonable thing to do, as it had been less
than a year since introduction of -w to iptables, so many distros
supported by libvirt were still using iptables (and possibly even
ebtables) versions too old to have the new commandline options.
It is now 2020, and as far as I can discern from repology.org (and
manually examining a RHEL7.9 system), every version of every distro
that is supported by libvirt now uses new enough versions of both
iptables and ebtables that they all have support for -w/--concurrent.
That means we can finally remove the conditional code and simply
always use them.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All the unit tests that use iptables/ip6tables/ebtables have been
written to omit the locking/exclusive use primitive on the generated
commandlines. Even though none of the tests actually execute those
commands (and so it doesn't matter for purposes of the test whether or
not the commands support these options), it still made sense when some
systems had these locking options and some didn't.
We are now at a point where every supported Linux distro has supported
the locking options on these commands for quite a long time, and are
going to make their use non-optional. As a first step, this patch uses
the virFirewallSetLockOverride() function, which is called at the
beginning of all firewall-related tests, to set all the bools
controlling whether or not the locking options are used to true. This
means that all the test cases must be updated to include the proper
locking option in their commandlines.
The change to make actual execs of the commands unconditionally use
the locking option will be in an upcoming patch - this one affects
only the unit tests.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When virfirewalltest.c was first written in commit 3a0ca7de51 (March
2013), a conditional accidentally tested for "ipv4" instead of
"ipv6". Since the file ended up only testing ipv4 rules, this has
never made any difference in practice, but I'm making some other
changes in this file and just couldn't let it stand :-)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The feature is never enabled by default on KVM and QEMU dropped it from
the models long ago.
https://bugzilla.redhat.com/show_bug.cgi?id=1798004
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The test takes more than a second on a beefy machine. While it's more
useful than some expensive tests it's not worth running all the time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/16
Added in support for the following parameters in attach-disk:
--source-protocol
--source-host-name
--source-host-socket
--source-host-transport
Added documentation to virsh.rst specifying usage.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce virshAddressFormat with code from cmdAttachDiskFormatAddress
to format the address.
Note that this patch fixes some whitespace inconsistencies in the
formatted addresses.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
'virsh attach-disk' uses stat() to determine if the 'source' is a
regular file. If stat fails though it assumes that the file is block.
Since it's way more common to have regular files and the detection does
not work at all when accessing a remote host, modify the default to
assume type='file' by default.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The test uses a script and compares the output against a template file.
VIR_TEST_REGENREATE_OUTPUT can be used on test failures. This test will
be marked as expensive once the refactors it guards are done.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The ESP SCSI controllers (NCR53C90, DC390, AM53C974) have the same
requirement as the LSI Logic controller for each disk to be set via
the scsi-id=NNN property, not the lun=NNN property.
Switching the code to use an enum will force authors to pay attention
to this difference when adding future SCSI controllers.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Probing for the NCR53C90 controller is a little unusual. The
qom-list-types QMP command returns a list of all types known to
the QEMU binary. It does not distinguish devices which are user
creatable from those which are built-in.
Any QEMU target that supports PCI will have the DC390 / AM53C974
devices because they are PCI based. Due to code dependencies
in QEMU though, existence of these two devices will also pull in
the NCR53C90 device (called just 'esp' in QEMU). The NCR53C90 is
not user-creatable and can only be used when built-in to the
machine type.
This is only the case on sparc machines, and certain mips64 and
m68k machines. IOW, we don't rely on qom-list-types as a guide
for existence of NCR53C90, as it shouldn't really exist in most
QEMU binaries.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This has the added benefit of 'gotnet' only being freed after
it was possibly used in the output string.
../src/internal.h:519:27: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
519 | # define fprintf(fh, ...) g_fprintf(fh, __VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
../tests/sockettest.c:194:9: note: in expansion of macro ‘fprintf’
194 | fprintf(stderr, "Expected %s, got %s\n", networkstr, gotnet);
| ^~~~~~~
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Jaroslav Suchanek <jsuchane@redhat.com>
Fixes: ba08c5932e
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In QEMU 5.2, the guest agent learned to manipulate a user
~/.ssh/authorized_keys. Bind the JSON API to libvirt.
https://wiki.qemu.org/ChangeLog/5.2#Guest_agent
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
QEMU supports egl-headless if QEMU_CAPS_EGL_HEADLESS capability
is present. There are some additional requirements but those are
checked for in qemuValidateDomainDeviceDefGraphics() and depend
on domain configuration and thus are not representable in domain
capabilities. Let's stick with plain qemuCaps check then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Update the KVM feature tests for QEMU's kvm-poll-control performance
hint.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain video model has to be validated in
qemuValidateDomainDeviceDefVideo().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two types of vhostuser ports:
dpdkvhostuser - OVS creates the socket and QEMU connects to it
dpdkvhostuserclient - QEMU creates the socket and OVS connects to it
But of course ovs-vsctl syntax for fetching ifname is different.
So far, we've implemented the former. The lack of implementation
for the latter means that we are not detecting the interface name
and thus not reporting it in domain XML, or failing to get
interface statistics.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1767013
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add detection of mdev_types capability to channel subsystem devices.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
