Commit Graph

16428 Commits

Author SHA1 Message Date
Laine Stump
ca6dc7b585 conf: eliminate hardcoded indent from domain xml
Many of the domain xml format functions (including all of the device
format functions) had hard-coded spaces, which made for incorrect
indentation when those functions were called in a different context
(for example, commit 2122cf39 added <interface> XML into the document
provided to a network hook script, and in this case it should have
been indented by 2 spaces, but was instead indented by 6 spaces).

To make it possible to insert a properly indented device anywhere into
an XML document, this patch removes hardcoded spaces from the
formatting functions, and calls virBufferAdjustIndent() at appropriate
places instead. (a regex search of domain_conf.c was done to assure
that all occurrences of hardcoded spaces were removed).

virDomainDiskSourceDefFormatInternal() is also called from
snapshot_conf.c, so two virBufferAdjustIndent() calls were temporarily
added around that call - those functions will have hardcoded spaces
removed in a separate patch.

This could cause some conflicts when backporting future changes to the
formatting functions to older branches, but fortunately the changes
are almost all trivial, so conflict resolution will be obvious.
2014-03-13 22:40:23 -06:00
Stefan Berger
a81756f1ff nwfilter: Add ARP src/dst IP mask for ebtables ARP
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=862887

Add a netmask for the source and destination IP address for the
ebtables --arp-ip-src and --arp-ip-dst options. Extend the XML
parser with support for XML attributes for these netmasks similar
to already supported netmasks. Extend the documentation.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2014-03-13 18:30:09 -04:00
Stefan Berger
5a2b17beb8 nwfilter: Fix rule priority problem
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1072292

Fix a problem related to rule priorities that did not allow to
have rules applied that had a higher priority than the chain they
were in. In this case the chain did not exist yet when the rule
was instantiated. The solution is to adjust the priority of rules
if the priority of the chain is of higher value. That way the chain
will be created before the rule.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2014-03-13 18:30:09 -04:00
Jim Fehlig
b322717f6e hostdev: add virObject field to virHostdevManager struct
Commit 6b306d66 converted virHostdevManager to a virObject, but
missed adding a virObject field to the virHostdevManager struct.
Result is memory corruption when taking a reference on an instance
of the object, where atomic inc is done on the stateDir field.
Later use of stateDir crashes libvirtd.
2014-03-13 08:41:43 -06:00
Michal Privoznik
41700d2152 qemu.conf: Mention virtlockd in @lock_manager description
When I played with virtlockd I was stunned by lacking
documentation. My frustration got bigger when I had to
read the patches to get the correct value to set in
qemu.conf.

Moreover, from pure libvirt-pride  I'm changing commented
value from sanlock to lockd. We want to favor our own
implementation after all.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-03-13 11:51:22 +01:00
Wang Rui
f613e894ec hotplug:Fix log mistake in qemuMonitorAddNetdev
VIR_DEBUG  in qemuMonitorAddNetdev should print vhostfdSize

Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
2014-03-13 11:46:19 +01:00
Jiri Denemark
287e2b395a Make ABI stability issue easier to debug
When ABI stability check fails, we only log the error message describing
the incompatibility. Let's log both XMLs in case of an error to make it
easier to analyze where and why the stability check failed.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-03-13 11:17:30 +01:00
Osier Yang
ce346623c1 qemu: Forbid "sgio" support for SCSI generic host device
The kernel didn't support the unprivileged SGIO for SCSI generic
device finally, and since it's unknow whether the way to support
unprivileged SGIO for SCSI generic device will be similar as for
SCSI block device or not, even it's simliar (I.e. via sysfs, for
SCSI block device, it's /sys/dev/block/8\:0/queue/unpriv_sgio,
for example), the file name might be different, So it's better not
guess what it should be like currently.

This patch removes the related code (mainly about the "shareable"
checking on the "sgio" setting, it's not supported at all, why
we leave checking code there? :-), and error out if "sgio" is
specified in the domain config.
2014-03-13 18:01:40 +08:00
Martin Kletzander
55d444bc01 docs: add VMmanager to web apps
This is a request for adding a VMmanager application as requested and
described by Ksenya Phil.

Signed-off-by: Ksenya Phil <philka2003@mail.ru>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-03-13 06:54:56 +01:00
Stefan Bader
8c869ad9f9 libxl: Check for control_d string to decide about dom0
As soon as any guest mounts xenfs to /proc/xen, there is a capabilities
file in that directory. However it returns nothing when reading from it.
Change the test to actually check the contents of the file.

BugLink: http://bugs.launchpad.net/bugs/1248025

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
2014-03-12 18:41:11 -06:00
Nehal J Wani
03fc0c626d vircrypto: fix Invalid write in virCryptoHashString()
While running vircryptotest, it was found that valgrind pointed out the
following error:

==27453== Invalid write of size 1
==27453==    at 0x4C7D7C9: virCryptoHashString (vircrypto.c:76)
==27453==    by 0x401C4E: testCryptoHash (vircryptotest.c:41)
==27453==    by 0x402A11: virtTestRun (testutils.c:199)
==27453==    by 0x401AD5: mymain (vircryptotest.c:76)
==27453==    by 0x40318D: virtTestMain (testutils.c:782)
==27453==    by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==27453==  Address 0x51f0541 is 0 bytes after a block of size 65 alloc'd
==27453==    at 0x4A0577B: calloc (vg_replace_malloc.c:593)
==27453==    by 0x4C69F2E: virAllocN (viralloc.c:189)
==27453==    by 0x4C7D76B: virCryptoHashString (vircrypto.c:69)
==27453==    by 0x401C4E: testCryptoHash (vircryptotest.c:41)
==27453==    by 0x402A11: virtTestRun (testutils.c:199)
==27453==    by 0x401AD5: mymain (vircryptotest.c:76)
==27453==    by 0x40318D: virtTestMain (testutils.c:782)
==27453==    by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==27453==

...and many more.  Two observations: hashstrlen was already set
to include the trailing NUL byte (so writing to hashstrlen as
the array offset was indeed writing one byte beyond bounds), and
VIR_ALLOC_N already guarantees zero-initialization (so we already
have a trailing NUL without needing to explicitly write one).

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-12 16:01:30 -06:00
Ján Tomko
f14c8a6be5 Fix type mismatch of virNetDev*NetConfig on non-Linux
Commit b4bbaee changed char* to const char*, but omitted
the non-Linux version.
2014-03-12 18:17:39 +01:00
Chunyan Liu
6225cb3df5 add pci passthrough to libxl driver
Add pci passthrough to libxl driver, support attach-device, detach-device and
start a vm with pci hostdev specified.
2014-03-12 17:03:50 +00:00
Chunyan Liu
98c5c53d69 add hostdev pci backend type for xen
Add VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN. For legacy xen, it will use "pciback" as
stub driver.
2014-03-12 17:03:23 +00:00
Chunyan Liu
53aba258b2 change lxc_hostdev.c to use virhostdev common library APIs 2014-03-12 17:03:18 +00:00
Chunyan Liu
cd618e0212 add unit test for new virhostdev common library
Add unit test for hostdev common library. Current tests are based on virpcimock.
2014-03-12 17:03:16 +00:00
Chunyan Liu
7becc46225 Add parameter checks/annotations to hostdev APIs
Mark many parameters as NONNULL and check for empty list of
hostdevs.
2014-03-12 16:53:33 +00:00
Chunyan Liu
e991b09ddd add 3 wrapper functions for prepare/reattach/update domain hostdevs 2014-03-12 16:53:20 +00:00
Chunyan Liu
4dd9f103fa improve virHostdevUpdate* parameters to make it more widely used
Changes parameter from vm def to specific hostdevs info and name info, so that
it could be used more widely, e.g, could be used without full vm def info.
2014-03-12 16:41:32 +00:00
Daniel P. Berrange
a65e6d3626 Capitalize USB, PCI and SCSI in hostdev variables
Change any variable names with Usb, Pci or Scsi to use
USB, PCI and SCSI since they are abbreviations.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-12 16:38:18 +00:00
Daniel P. Berrange
e9a60dcc7c Remove redundant duplicated 'Hostdev' string method names
Some virHostdevXXXX methods included the string Hostdev again
as a suffix. Change the latter to Device instead.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-12 16:35:30 +00:00
Chunyan Liu
7be4bddea1 Capitalize USB, PCI and SCSI in hostdev methods
Change any method names with Usb, Pci or Scsi to use
USB, PCI and SCSI since they are abbreviations.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-12 16:20:01 +00:00
Daniel P. Berrange
b4bbaeef41 Fixed const-ness of parameters in netdev/hostdev code
Various methods in virnetdev.c and virhostdev.c were missing
const-ness for several char * parameters.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-12 16:03:06 +00:00
Chunyan Liu
1c6ee84c9d improve parameter name to let it more meaningful 2014-03-12 16:03:06 +00:00
Chunyan Liu
1fabf06ca5 move virHostdevNodeDevice* to virhostdev.c 2014-03-12 16:03:06 +00:00
Chunyan Liu
de4aace4b0 extract general code of NodeDeviceReset 2014-03-12 16:03:06 +00:00
Chunyan Liu
1f12cef642 extract general code of NodeDeviceReAttach 2014-03-12 16:03:06 +00:00
Chunyan Liu
fdb313c4b2 extract general code of NodeDeviceDetach 2014-03-12 16:03:06 +00:00
Chunyan Liu
a4797138ad move virHostdevReAttachHostScsiDevices to virhostdev.c 2014-03-12 16:03:06 +00:00
Chunyan Liu
1136b8c153 pass driver name as parameter to virHostdevReAttachScciHostdevs 2014-03-12 16:03:06 +00:00
Chunyan Liu
b473b58344 extract general code from qemuDomainReAttachHostScsiDevices
Extract general code from qemuDomainReAttachHostScsiDevices to
virHostdevDomainReAttachHostScsiDevices.
2014-03-12 16:03:06 +00:00
Chunyan Liu
2d961cf3ba move virHostdevReAttachUsbHostdevs to virhostdev.c 2014-03-12 16:03:05 +00:00
Chunyan Liu
1ba06c3adf pass driver name as paramter to virHostdevReAttachUsbHostdevs 2014-03-12 16:03:05 +00:00
Chunyan Liu
08ae90266a extract general code from qemuDomainReAttachHostUsbDevices
Extract general code from qemuDomainReAttachHostUsbDevices to
virHostdevDomainReAttachHostUsbDevices.
2014-03-12 16:03:05 +00:00
Chunyan Liu
5035f75fed move virHostdevPrepareHostSCSIDevices to virhostdev.c 2014-03-12 16:03:05 +00:00
Chunyan Liu
c82c274581 pass driver name as parameter to virHostdevPrepareSCSIDevices 2014-03-12 16:03:05 +00:00
Chunyan Liu
313437ac64 extract general code from qemuPrepareHostSCSIDevices
Extract general code from qemuPrepareHostSCSIDevices to
virHostdevPrepareHostSCSIDevices.
2014-03-12 16:03:05 +00:00
Chunyan Liu
1c310c609c move virHostdevPrepareHostUSBDevices to virhostdev.c 2014-03-12 16:03:05 +00:00
Chunyan Liu
7972571142 pass driver name to virHostdevPrepareUSBDevices 2014-03-12 16:03:05 +00:00
Chunyan Liu
27da1757c8 rename qemu*USBDevices to virHostdev*USBDevices 2014-03-12 16:03:05 +00:00
Chunyan Liu
b7508481f1 extract general code from qemuPrepareHostUSBDevices
Extract general code from qemuPrepareHostUSBDevices to
virHostdevPrepareHostUSBDevices.
2014-03-12 16:03:05 +00:00
Chunyan Liu
00729f4559 move virHostdevUpdate* functions to virhostdev.c 2014-03-12 16:03:05 +00:00
Chunyan Liu
d44a20470e pass driver_name as parameter of virHostdevUpdate*Hostdevs functions 2014-03-12 16:03:05 +00:00
Chunyan Liu
e57f929dc1 extract general code from qemuUpdateActiveScsiHostdevs
Extract general code from qemuUpdateActiveScsiHostdevs to
virHostdevUpdateActiveScsiHostdevs
2014-03-12 16:03:05 +00:00
Chunyan Liu
ccf9d0f392 extract general code from qemuUpdateActiveUsbHostdevs
Extract general code from qemuUpdateActiveUsbHostdevs to
virHostdevUpdateActiveUsbHostdevs.
2014-03-12 16:03:05 +00:00
Chunyan Liu
94d505ba15 extract general code from qemuUpdateActivePciHostdevs
Extract general code from qemuUpdateActivePciHostdevs to
virHostdevUpdateActivePciHostdevs.
2014-03-12 16:03:05 +00:00
Chunyan Liu
899b261127 move virHostdevPrepare(ReAttach)PCIDevices to virhostdev.c 2014-03-12 16:03:05 +00:00
Daniel P. Berrange
63d4dd0336 rename qemuReAttachPciDevice to virHostdevReAttachPciDevice
Signed-off-by: Chunyan Liu <cyliu@suse.com>
2014-03-12 16:03:05 +00:00
Chunyan Liu
82e8dd4cf8 Conditionally wait for kvm_assigned_device cleanup
Only wait for kvm device cleanup if the driver is pci-stub
2014-03-12 16:03:05 +00:00
Chunyan Liu
4e46107e43 pass driver name as a parameter to virHostdevReAttachPCIDevices 2014-03-12 16:03:04 +00:00