Commit Graph

295 Commits

Author SHA1 Message Date
Dmitry Guryanov
c8a6f844c3 add ploop fs driver type
Ploop is a pseudo device which makeit possible to access
to an image in a file as a block device. Like loop devices,
but with additional features, like snapshots, write tracker
and without double-caching.

It used in PCS for containers and in OpenVZ. You can manage
ploop devices and images with ploop utility
(http://git.openvz.org/?p=ploop).

Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
2015-01-16 14:07:46 +01:00
Martin Kletzander
199390117c docs, schema, conf: Add support for PMU feature
Just a new feature that can be turned on/off.

https://bugzilla.redhat.com/show_bug.cgi?id=1178853

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-01-16 13:43:46 +01:00
Cédric Bosdonnat
a117652917 Use the network route definitions for domains 2015-01-16 10:14:03 +01:00
Martin Kletzander
adff345e1e qemu: Allow enabling/disabling features with host-passthrough
QEMU supports feature specification with -cpu host and we just skip
using that.  Since QEMU developers themselves would like to use this
feature, this patch modifies the code to work.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178850

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-01-13 08:51:01 +01:00
Cédric Bosdonnat
c9a641f1e5 Domain network devices can now have a <route> element
Network interfaces devices and host devices with net capabilities can
now have IPv4 and/or an IPv6 routes configured.
2015-01-05 20:24:17 +01:00
Cédric Bosdonnat
2811cc611e Allow network capabilities hostdev to configure IP addresses 2015-01-05 20:24:17 +01:00
Cédric Bosdonnat
aa2cc72100 Domain conf: allow more than one IP address for net devices
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
2015-01-05 20:24:04 +01:00
Pavel Hrdina
742d49fa17 qemu-command: introduce new vgamem attribute for QXL video device
Add attribute to set vgamem_mb parameter of QXL device for QEMU. This
value sets the size of VGA framebuffer for QXL device. Default value in
QEMU is 8MB so reuse it also in libvirt to not break things.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2014-11-24 22:20:13 +01:00
Peter Krempa
b7d1bee2b9 storage: rbd: Implement support for passing config file option
To be able to express some use cases of the RBD backing with libvirt, we
need to be able to specify a config file for the RBD client to qemu as
that is one of the commonly used options.
2014-11-21 14:37:03 +01:00
Peter Krempa
0255660658 storage: rbd: qemu: Add support for specifying internal RBD snapshots
Some storage systems have internal support for snapshots. Libvirt should
be able to select a correct snapshot when starting a VM.

This patch adds a XML element to select a storage source snapshot for
the RBD protocol which supports this feature.
2014-11-21 14:37:02 +01:00
Peter Krempa
24c25a68c2 conf: Add channel state for virtio channels to the XML
To track state of virtio channels this patch adds a new output-only
attribute called 'state' to the <target> element of virtio channels.

This will be later populated with the guest state of the channel.
2014-11-21 11:00:11 +01:00
Conrad Meyer
79f370fc4b domaincommon.rng: Add 'bootloader' to os=hvm schema for Bhyve
Additionally, make the <bootloader> tag optional (for bhyveload with
custom arguments) (also, matches the actual parser).
2014-11-12 09:55:22 +01:00
Matthias Gatto
e34ffa96fb qemu: Modify the structure _virDomainBlockIoTuneInfo.
Modify the structure _virDomainBlockIoTuneInfo to support these the new
options.
Change the initialization of the variable expectedInfo in qemumonitorjsontest.c
to avoid compiling problem.
Add documentation about the new xml options

Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
2014-11-10 15:48:59 +01:00
Prerna Saxena
e3c44f0d36 cpu_conf: Allow specification of 'units' for @memory on numa nodes.
CPU numa topology implicitly allows memory specification in 'KiB'.

Enabling this to accept the 'unit' in which memory needs to be specified.
This now allows users to specify memory in units of choice, and
lists the same in 'KiB' -- just like other 'memory' elements in XML.

    <numa>
      <cell cpus='0-3' memory='1024' unit='MiB' />
      <cell cpus='4-7' memory='1024' unit='MiB' />
    </numa>

Also augment test cases to correctly model NUMA memory specification.
This adds the tag 'unit="KiB"' for memory attribute in NUMA cells.

Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-11-10 14:55:45 +01:00
Laine Stump
07450cd429 conf: add trustGuestRxFilters attribute to network and domain interface
This new attribute will control whether or not libvirt will pay
attention to guest notifications about changes to network device mac
addresses and receive filters. The default for this is 'no' (for
security reasons). If it is set to 'yes' *and* the specified device
model and connection support it (currently only macvtap+virtio) then
libvirt will watch for NIC_RX_FILTER_CHANGED events, and when it
receives one, it will issue a query-rx-filter command, retrieve the
result, and modify the host-side macvtap interface's mac address and
unicast/multicast filters accordingly.

The functionality behind this attribute will be in a later patch. This
patch merely adds the attribute to the top-level of a domain's
<interface> as well as to <network> and <portgroup>, and adds
documentation and schema/xml2xml tests. Rather than adding even more
test files, I've just added the net attribute in various applicable
places of existing test files.
2014-10-06 11:49:10 -04:00
Martin Kletzander
540a84ec89 docs, conf, schema: add support for shmem device
This patch adds parsing/formatting code as well as documentation for
shared memory devices.  This will currently be only accessible in QEMU
using it's ivshmem device, but is designed as generic as possible to
allow future expansion for other hypervisors.

In the devices section in the domain XML users may specify:

- For shmem device using a server:

 <shmem name='shmem0'>
   <server path='/tmp/socket-ivshmem0'/>
   <size unit='M'>32</size>
   <msi vectors='32' ioeventfd='on'/>
 </shmem>

- For ivshmem device not using an ivshmem server:

 <shmem name='shmem1'>
   <size unit='M'>32</size>
 </shmem>

Most of the configuration is made optional so it also allows
specifications like:

 <shmem name='shmem1/>
 <shmem name='shmem2'>
   <server/>
 </shmem>

Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-10-03 22:43:08 +02:00
Ján Tomko
5b3536ae90 conf: add options for disabling segment offloading
Add options for tuning segment offloading:
<driver>
  <host csum='off' gso='off' tso4='off' tso6='off'
        ecn='off' ufo='off'/>
  <guest csum='off' tso4='off' tso6='off' ecn='off' ufo='off'/>
</driver>
which control the respective host_ and guest_ properties
of the virtio-net device.
2014-09-24 16:16:45 +02:00
Jianwei Hu
e1dfb6681a schema: properly set tap and vhost backend attributes optional
Each attribute is optional, commit af8b4a2 forgot to mention that.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-09-22 16:54:26 +02:00
John Ferlan
58abf1bb36 hostdev: Add "rawio" attribute to _virDomainHostdevSubsysSCSI
Add the 'rawio' attribute to match _virDomainDiskDef and process the
hostdev XML similarly to the disk XML for a lun which supports/requires rawio
2014-09-19 07:47:46 -04:00
Martin Kletzander
def6b35989 docs, conf, schema: add support for shared memory mapping
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-09-17 16:10:26 +02:00
Martin Kletzander
f864aac90b schemas: finish virTristate{Bool,Switch} transition
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-09-17 16:10:26 +02:00
Ján Tomko
af8b4a2e6f conf: add backend element to interfaces
For tuning the network, alternative devices
for creating tap and vhost devices can be specified via:
<backend tap='/dev/net/tun' vhost='/dev/net-vhost'/>
2014-09-16 15:38:34 +02:00
Eric Blake
7e8feed4a7 cputune: allow interleaved xml
I noticed this with the recent iothread pinning code, but the
problem existed longer than that. The XML validation required
users to supply <cputune> children in a strict order, even though
there was no conceptual reason why they can't occur in any order.

docs/ changes best viewed with -w

* docs/schemas/domaincommon.rng (cputune): Add interleave.
* tests/qemuxml2argvdata/qemuxml2argv-cputune-iothreads.xml: Swap
up order, copying canonical form...
* tests/qemuxml2xmloutdata/qemuxml2xmlout-cputune-iothreads.xml:
...here.
* tests/qemuxml2xmltest.c (mymain): Mark the difference.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-09-15 18:59:40 -06:00
John Ferlan
938fb12fad domain_conf: Add iothreadpin to cputune
https://bugzilla.redhat.com/show_bug.cgi?id=1101574

Add an option 'iothreadpin' to the <cpuset> to allow for setting the
CPU affinity for each IOThread.

The iothreadspin will mimic the vcpupin with respect to being able to
assign each iothread to a specific CPU, although iothreads ids start
at 1 while vcpu ids start at 0. This matches the iothread naming scheme.
2014-09-15 13:19:01 -04:00
Michal Privoznik
742b08e30f qemu: Automatically create NVRAM store
When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.

Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2014-09-10 09:38:07 +02:00
Michal Privoznik
68bf13dbef conf: Extend <loader/> and introduce <nvram/>
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.

Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files

The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-09-10 09:38:07 +02:00
John Ferlan
e2523de554 domain_conf: Add support for iothreads in disk definition
Add a new disk "driver" attribute "iothread" to be parsed as the thread
number for the disk to use. In order to more easily facilitate the usage
and configuration of the iothread, a "zero" for the attribute indicates
iothreads are not supported for the device and a positive value indicates
the specific thread to try and use.
2014-08-28 16:27:54 -04:00
John Ferlan
ee3a9620da domain_conf: Introduce iothreads XML
Introduce XML to allowing adding iothreads to the domain. These can be
used by virtio-blk-pci devices in order to assign a specific thread to
handle the workload for the device.  The iothreads are the official
implementation of the virtio-blk Data Plane that's been in tech preview
for QEMU.
2014-08-28 16:27:53 -04:00
Alex Williamson
d071164272 Add new 'kvm' domain feature and ability to hide KVM signature
QEMU 2.1 added support for the kvm=off option to the -cpu command,
allowing the KVM hypervisor signature to be hidden from the guest.
This enables disabling of some paravirualization features in the
guest as well as allowing certain drivers which test for the
hypervisor to load.  Domain XML syntax is as follows:

<domain type='kvm>
  ...
  <features>
    ...
    <kvm>
      <hidden state='on'/>
    </kvm>
  </features>
  ...

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-08-26 10:41:24 +02:00
Martin Kletzander
43b8123d39 docs, conf: add support for bootmenu timeout
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-08-25 14:10:54 +02:00
Peter Krempa
e260a0e60a conf: Add USB sound card support and implement it for qemu 2014-08-08 14:34:20 +02:00
John Ferlan
54ac483e68 hostdev: Add iSCSI hostdev XML
Introduce a new structure to handle an iSCSI host device based on the
existing virDomainHostdevSubsysSCSI by adding a "protocol='iscsi'" to
the <source/> element. The existing scsi_host subsystem RNG was modified
to read an optional "protocol='adapter'", although it won't be written
out nor is it documented as an option (by choice).

The new hostdev structure mimics the existing <disk/> element for an
iSCSI device (network) device. New XML is:

  <hostdev mode='subsystem' type='scsi' managed='yes'>
    <source protocol='iscsi' name='iqn.1992-01.com.example'>
      <host name='example.org' port='3260'/>
      <auth username='myname'>
        <secret type='iscsi' usage='mycluster_myname'/>
      </auth>
    </source>
    <address type='drive' controller='0' bus='0' target='2' unit='5'/>
  </hostdev>

The controller element will mimic the existing scsi_host code insomuch
as when 'lsi' and 'virtio-scsi' are used.
2014-08-07 15:07:56 -04:00
Eric Blake
232a31bea3 blockcommit: track job type in xml
A future patch is going to wire up qemu active block commit jobs;
but as they have similar events and are canceled/pivoted in the
same way as block copy jobs, it is easiest to track all bookkeeping
for the commit job by reusing the <mirror> element.  This patch
adds domain XML to track which job was responsible for creating a
mirroring situation, and adds a job='copy' attribute to all
existing uses of <mirror>.  Along the way, it also massages the
qemu monitor backend to read the new field in order to generate
the correct type of libvirt job (even though it requires a
future patch to actually cause a qemu event that can be reported
as an active commit).  It also prepares to update persistent XML
to match changes made to live XML when a copy completes.

* docs/schemas/domaincommon.rng: Enhance schema.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): Add a field.
* src/conf/domain_conf.c (virDomainBlockJobType): String conversion.
(virDomainDiskDefParseXML): Parse job type.
(virDomainDiskDefFormat): Output job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish
active from regular commit.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type.
(qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type
on completion.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New
file.
* tests/qemuxml2xmltest.c (mymain): Drive new test.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-07-30 06:32:38 -06:00
Eric Blake
9a212d6708 blockcopy: add more XML for state tracking
Doing a blockcopy operation across a libvirtd restart is not very
robust at the moment.  In particular, we are clearing the <mirror>
element prior to telling qemu to finish the job.  Also, thanks to the
ability to request async completion, the user can easily regain
control prior to qemu actually finishing the effort, and they should
be able to poll the domain XML to see if the job is still going.

A future patch will fix things to actually wait until qemu is done
before modifying the XML to reflect the job completion.  But since
qemu issues identical BLOCK_JOB_COMPLETE events regardless of whether
the job was cancelled (kept the original disk) or completed (pivoted
to the new disk), we have to track which of the two operations were
used to end the job.  Furthermore, we'd like to avoid attempts to
end a job where we are already waiting on an earlier request to qemu
to end the job.  Likewise, if we miss the qemu event (perhaps because
it arrived during a libvirtd restart), we still need enough state
recorded to be able to determine how to modify the domain XML once
we reconnect to qemu and manually learn whether the job still exists.

Although this patch doesn't actually fix the problem, it is a
preliminary step that makes it possible to track whether a job
has already begun steps towards completion.

* src/conf/domain_conf.h (virDomainDiskMirrorState): New enum.
(_virDomainDiskDef): Convert bool mirroring to new enum.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Handle new values.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Adjust
client.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
* docs/schemas/domaincommon.rng (diskMirror): Expose new values.
* docs/formatdomain.html.in (elementsDisks): Document it.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-07-29 15:36:30 -06:00
Michal Privoznik
136ad49740 domain: Introduce ./hugepages/page/[@size, @unit, @nodeset]
<memoryBacking>
    <hugepages>
      <page size="1" unit="G" nodeset="0-3,5"/>
      <page size="2" unit="M" nodeset="4"/>
    </hugepages>
  </memoryBacking>

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-29 12:02:34 +01:00
Roman Bogorodskiy
1281f4a100 schema: bhyve and nmdm updates
* docs/schemas/domaincommon.rng: Add bhyve domain type, nmdm
  serial type and master and slave optional attributes for
  serial that are used by nmdm
* tests/domainschematest: Add bhyvexml2argvdata directory
  to validate bhyve XMLs
2014-07-29 09:52:16 +04:00
Cédric Bosdonnat
47e5b5ae32 lxc: allow to keep or drop capabilities
Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:

  <mknod state="on"/>, keep CAP_MKNOD capability
  <sys_chroot state="off"/> drop CAP_SYS_CHROOT capability

Users can restrict or give more capabilities than the default using
this mechanism.
2014-07-23 15:12:37 +08:00
Cédric Bosdonnat
3ba0469ce6 lxc network configuration allows setting target container NIC name
LXC network devices can now be assigned a custom NIC device name on the
container side. For example, this is configured with:

    <interface type='network'>
      <source network='default'/>
      <guest dev="eth1"/>
    </interface>

In this example the network card will appear as eth1 in the guest.
2014-07-18 14:25:57 +02:00
Eric Blake
7f1ca3d6fe schema: put interleave at correct level
The previous commit 09d4d26 put the interleave at the wrong point;
it didn't allow interleaving with <memory>.

* docs/schema/domaincommon.rng (numatune): Fix interleave location.
* tests/qemuxml2argvdata/qemuxml2argv-numatune-memnode.xml: Adjust test.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-07-16 17:30:31 -06:00
Martin Kletzander
09d4d261e5 schema: add interleave inside numatune
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-16 20:36:20 +02:00
Martin Kletzander
a05c01521c conf, schema: add support for memnode elements
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-16 20:15:45 +02:00
Martin Kletzander
992000e6d8 conf, schema: add 'id' field for cells
In XML format, by definition, order of fields should not matter, so
order of parsing the elements doesn't affect the end result.  When
specifying guest NUMA cells, we depend only on the order of the 'cell'
elements.  With this patch all older domain XMLs are parsed as before,
but with the 'id' attribute they are parsed and formatted according to
that field.  This will be useful when we have tuning settings for
particular guest NUMA node.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-16 20:15:45 +02:00
Michele Paolino
a14abd463a support for QEMU vhost-user
This patch adds support for the QEMU vhost-user feature to libvirt.
vhost-user enables the communication between a QEMU virtual machine
and other userspace process using the Virtio transport protocol.
It uses a char dev (e.g. Unix socket) for the control plane,
while the data plane based on shared memory.

The XML looks like:

<interface type='vhostuser'>
    <mac address='52:54:00:3b:83:1a'/>
    <source type='unix' path='/tmp/vhost.sock' mode='server'/>
    <model type='virtio'/>
</interface>

Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-16 18:44:57 +02:00
Mike Perez
d950494129 qemu: Add cmd_per_lun, max_sectors to virtio-scsi
This introduces two new attributes "cmd_per_lun" and "max_sectors" same
with the names QEMU uses for virtio-scsi. An example of the XML:

<controller type='scsi' index='0' model='virtio-scsi' cmd_per_lun='50'
max_sectors='512'/>

The corresponding QEMU command line:

-device virtio-scsi-pci,id=scsi0,cmd_per_lun=50,max_sectors=512,
bus=pci.0,addr=0x3

Signed-off-by: Mike Perez <thingee@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-07-02 09:43:17 +02:00
Eric Blake
b50e104923 blockjob: don't remove older-style mirror XML
Commit 7c6fc39 introduced a regression in the XML produced for older
clients.  The argument at the time was that clients shouldn't be
depending on output-only data for something that is only going to
be triggered for a transient guest; but John Ferlan reported that
the automated testsuite was such a client.  It's better to be safe
than sorry by guaranteeing back-compat cruft.  Note that later
patches will be using <mirror> for active block commit, but there
we don't have to worry about back-compat.

* src/conf/domain_conf.c (virDomainDiskDefFormat): Restore old
style output when necessary.
* docs/schemas/domaincommon.rng: Validate back-compat style.
* docs/formatdomain.html.in: Update the documentation.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-16 13:48:00 -06:00
Eric Blake
7c6fc3948e conf: alter disk mirror xml output
Now that we track a disk mirror as a virStorageSource, we might
as well update the XML to theoretically allow any type of
mirroring destination (not just a local file).  A later patch
will also be reusing <mirror> to track the block commit of the
top layer of a chain, which is another case where libvirt needs
to update the backing chain after the job is finally pivoted,
and since backing chains can have network backing files as the
destination to commit into, it makes more sense to display that
in the XML.

This patch changes output-only XML; it was already documented
that <mirror> does not affect a domain definition at this point
(because qemu doesn't provide persistent bitmaps yet).  Any
application that was starting a block copy job with older libvirt
and then relying on the domain XML to determine if it was
complete will no longer be able to access the file= and format=
attributes of mirror that were previously used.  However, this is
not going to be a problem in practice: the only time a block copy
job works is on a transient domain, and any app that is managing
a transient domain probably already does enough of its own
bookkeeping to know which file it is mirroring into without
having to re-read it from the libvirt XML.  The one thing that
was likely to be used in a mirroring job was the ready=
attribute, which is unchanged.  Meanwhile, I made sure the schema
and parser still accept the old format, even if we no longer
output it, so that upgrading from an older version of libvirt is
seamless.

* docs/schemas/domaincommon.rng (diskMirror): Alter definition.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): Parse two
styles of mirror elements.
(virDomainDiskDefFormat): Output new style.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror-old.xml: New
file, copied from...
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: ...here
before modernizing.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old*: New
files.
* tests/qemuxml2xmltest.c (mymain): Test both styles.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-06 11:48:09 -06:00
Olivia Yin
61b1c681e0 change machine name ppce500v2 to ppce500
ppce500v2 is not machine supported by official release of QEMU.
It should be replaced by ppce500.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-05-27 08:48:57 +02:00
Jiri Denemark
a2e369bc00 conf: Output disk backing store details in domain XML
The XML for quite a longish backing chain is shown below:

  <disk type='network' device='disk'>
    <driver name='qemu' type='qcow2'/>
    <source protocol='nbd' name='bar'>
      <host transport='unix' socket='/var/run/nbdsock'/>
    </source>
    <backingStore type='block' index='1'>
      <format type='qcow2'/>
      <source dev='/dev/HostVG/QEMUGuest1'/>
      <backingStore type='file' index='2'>
        <format type='qcow2'/>
        <source file='/tmp/image2.qcow'/>
        <backingStore type='file' index='3'>
          <format type='qcow2'/>
          <source file='/tmp/image3.qcow'/>
          <backingStore type='file' index='4'>
            <format type='qcow2'/>
            <source file='/tmp/image4.qcow'/>
            <backingStore type='file' index='5'>
              <format type='qcow2'/>
              <source file='/tmp/image5.qcow'/>
              <backingStore type='file' index='6'>
                <format type='raw'/>
                <source file='/tmp/Fedora-17-x86_64-Live-KDE.iso'/>
                <backingStore/>
              </backingStore>
            </backingStore>
          </backingStore>
        </backingStore>
      </backingStore>
    </backingStore>
    <target dev='vdb' bus='virtio'/>
  </disk>

Various disk types and formats can be mixed in one chain. The
<backingStore/> empty element marks the end of the backing chain and it
is there mostly for future support of parsing the chain provided by a
user. If it's missing, we are supposed to probe for the rest of the
chain ourselves, otherwise complete chain was provided by the user. The
index attributes of backingStore elements can be used to unambiguously
identify a specific part of the image chain.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-04-24 16:06:13 +02:00
Eric Blake
8fb446754d conf: fix omission of <driver> in domain dumpxml
I noticed that depending on the <driver> attributes the user passed
in, the output may omit the <driver> element altogether.  For example,
the rerror_policy has had this problem since commit 4bb4109 in Oct
2011.  But in adding testsuite coverage to expose it, I found another
problem: the C code is just fine without a driver name, but the
XML validator required either a name or a cache mode.

* src/conf/domain_conf.c (virDomainDiskDefFormat): Update
conditional.
* docs/schemas/domaincommon.rng (diskDriver): Simplify.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.xml:
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.args:
New files.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-discard.xml:
Enhance test.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-discard.xml:
Likewise.
* tests/qemuxml2argvtest.c (mymain): New test.
* tests/qemuxml2xmltest.c (mymain): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-04-16 10:49:07 +02:00
Eric Blake
fec1a93927 conf: split <disk> schema into more pieces
To make <disk> schema more maintainable and to allow for moving the
pieces to a common file in the future. It relies on the ability to
override definitions as part of an include, set up in the previous
patch.

The diff is a bit hard to read, because it mixes reindentation
with refactoring; 'git diff -b --patience' may help.

* docs/schemas/domaincommon.rng (disk): Refactor into pieces.
(diskSource, diskSourceFile, diskSourceBlock, diskSourceDir)
(diskSourceVolume: New defines.
(diskSourceNetwork): Revise scope.
* docs/schemas/domainsnapshot.rng (disksnapshot): Adjust.
* tests/domainsnapshotxml2xmlin/disk-seclabel-invalid.xml,
tests/domainsnapshotxml2xmlin/disk-network-seclabel-invalid.xml: New
tests to check seclabel is forbidden in domain snapshot by schema.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-04-16 10:45:55 +02:00
Eric Blake
369cdfa8f5 conf: set up for per-grammar overrides in schemas
This patch is my first experience playing with nested grammars,
as documented in http://relaxng.org/tutorial-20011203.html#IDA3PZR.
I plan on doing more overrides in order to make the RelaxNG
grammar mirror the C code refactoring into a common
virStorageSource, but where different clients of that source do
not support the same subset of functionality.  By starting with
something fairly easy to validate, I can make sure my later
patches will be possible.

This patch adds a use of the no-op <ref
name='sourceStartupPolicy'/> to the disksnapshot definition, so
that the snapshot version of a type='file' <source> more closely
resembles the version in domaincommon.  A future patch will merge
the two files into using a common define, but this patch is
sufficient for testing that adding <source
startupPolicy='optional'/> in any of the
tests/domainsnapshotxml2xmlin/*.xml files still gets rejected
unless it occurs within the <domain> subelement, because the
definition of startupPolicy is empty outside of domain.rng.

* docs/schemas/storagecommon.rng (storageStartupPolicy)
(storageSourceExtra): Create no-op defaults.
* docs/schemas/domainsnapshot.rng (domain): Use nested grammar
to avoid restricting <domain>.
(storageSourceExtra): Create new override.
(disksnapshot): Access overrides through common names.
* docs/schemas/domaincommon.rng (disk): Access overrides through
common names.
* docs/schemas/domain.rng (storageStartupPolicy)
(storageSourceExtra): Create new overrides.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-04-15 21:07:59 +02:00
Eric Blake
4f596a070d conf: move storage formats to common RNG file
We had incomplete RelaxNG support for storage formats listed
in virstoragefile.h: commit 027bf2e added 'vdi' but forgot
to update the <volume> and <domain> xml lists; the <volume>
list was also missing 'fat' and 'vhd'.  Maintaining two lists
is a recipe for them getting out of sync, so make the list
common so that both contexts benefit the next time we add a
format in a single location.

* docs/schemas/domaincommon.rng (storageFormat): Move...
* docs/schemas/storagecommon.rng: ...here, and add vdi.
* docs/schemas/storagevol.rng (formatfile): Use common list.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-04-15 13:15:11 +02:00
Eric Blake
a9efe2d70c conf: better <disk> interleaving in schema
In general, we try to make virt-xml-validate tolerant of input
elements in any order when possible.  However, as written, the
RNG grammar did not permit <source> unless there was an explicit
type= attribute (even though the C code manages just fine by
defaulting to type='file').  After making the attribute optional
on the 'file' branch, I noticed that the use of diskspec was now
redundant with the branch when no <source> was supplied.

View this patch with 'git diff -b' for a better picture of the
schema change.

* docs/schemas/domaincommon.rng (disk): Hoist 'diskspec' out of
choice, make type='file' default, and still preserve interleave.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-source-pool.xml:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-discard.xml:
New files.
* tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-discard.xml:
Reorder XML.
* tests/qemuxml2xmltest.c (mymain): Cover new files.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-04-15 11:45:02 +02:00
Eric Blake
110c0db88c conf: create common storage RNG grammar file
Having two tiny files with a couple definitions didn't make
as much sense as one common file, especially since I plan to
add more definitions and use it in more places.

* docs/schemas/storageencryption.rng: Merge this...
* docs/schemas/storagefilefeatures.rng: ...and this, into...
* docs/schemas/storagecommon.rng: ...this new file.
* docs/schemas/Makefile.am (schema_DATA): Reflect renames.
* docs/schemas/storagevol.rng: Likewise.
* docs/schemas/domaincommon.rng: Likewise.
* libvirt.spec.in: Likewise.
* mingw-libvirt.spec.in: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-04-14 07:07:01 -06:00
Chunyan Liu
98c5c53d69 add hostdev pci backend type for xen
Add VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN. For legacy xen, it will use "pciback" as
stub driver.
2014-03-12 17:03:23 +00:00
Li Zhang
bc18373391 conf: Add keyboard input device type
There is no keyboard support currently in libvirt.

For some platforms (PPC64 QEMU) this makes graphics unusable,
since the keyboard is not implicit and it can't be added via libvirt.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-02-19 09:16:31 +01:00
Martin Kletzander
5b189541ac conf: introduce spiceport chardev backend
Add a new character device backend called 'spiceport' that uses
spice's channel for communications and apart from spicevmc can be used
as a backend for any character device from libvirt's point of view.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-02-11 13:43:55 +01:00
Peter Krempa
600bca592b qemu: hyperv: Add support for timer enlightenments
Add a new <timer> for the HyperV reference time counter enlightenment
and the iTSC reference page for Windows guests.

This feature provides a paravirtual approach to track timer events for
the guest (similar to kvmclock) with the option to use real hardware
clock on systems with a iTSC with compensation across various hosts.
2014-02-10 11:30:10 +01:00
Peter Krempa
bbd392ff86 schema: Fix guest timer specification schema according to the docs
According to the documentation describing various tunables for domain
timers not all the fields are supported by all the driver types. Express
these in the RNG:

- rtc, platform: Only these support the "track" attribute.
- tsc: only one to support "frequency" and "mode" attributes
- hpet, pit: tickpolicy/catchup attribute/element
- kvmclock: no extra attributes are supported

Additionally the attributes of the <catchup> element for
tickpolicy='catchup' are optional according to the parsing code. Express
this in the XML and fix a spurious space added while formatting the
<catchup> element and add tests for it.
2014-02-10 11:09:14 +01:00
Francesco Romani
08d07e5fd8 spice: expose the QEMU disable file transfer option
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.

This patch exposes this option to libvirt.
Adds a new element 'filetransfer', with one property,
'enable', which accepts a boolean.
Default is enabled, for backward compatibility.

Depends on the capability exported in the first patch of the series.

Signed-off-by: Francesco Romani <fromani@redhat.com>
2014-01-21 11:35:41 +01:00
Gao feng
fb2fbc6d7b domain: introduce xml elements for throttle blkio cgroup
This patch introduces new xml elements under <blkiotune>,
we use these new elements to setup the throttle blkio
cgroup for domain. The new blkiotune node looks like this:

<blkiotune>
  <device>
    <path>/path/to/block</path>
    <weight>1000</weight>
    <read_iops_sec>10000</read_iops_sec>
    <write_iops_sec>10000</write_iops_sec>
    <read_bytes_sec>1000000</read_bytes_sec>
    <write_bytes_sec>1000000</write_bytes_sec>
  </device>
</blkiotune>

Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
2014-01-20 10:52:42 +08:00
Eric Blake
dd0dda2e4a schema: fix idmap validation
When idmap was added to LXC, we forgot to cover it in the testsuite.
The schema was missing an <element> layer, and as a result,
virt-xml-validate was failing on valid dumpxml output.

Reported by Eduard - Gabriel Munteanu on IRC.

* docs/schemas/domaincommon.rng (idmap): Include <idmap> element,
and support interleaves.
* tests/lxcxml2xmldata/lxc-idmap.xml: New file.
* tests/lxcxml2xmltest.c (mymain): Test it.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-01-10 10:54:14 -07:00
Pranavkumar Sawargaonkar
27e32e0f3d AArch64: Porting of armv7l conditons to run qemu for aarch64.
AArch64 qemu has similar behavior as armv7l, like use of mmio etc.
This patch adds similar bypass checks what we have for armv7l to aarch64.
E.g. we are enabling mmio transport for Nicdev.
Making addDefaultUSB and addDefaultMemballoon to false etc.

V3:
- Adding missing domain rng schema for aarcg64 and test case in
  testutilsqemu.c which was causing test suite failure
  while running make check.

V2:
- Added testcase to qemuxml2argvtest as suggested
  during review comments of V1.

V1:
- Initial patch.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
2014-01-06 11:02:24 -05:00
Hu Tao
4313feade4 conf: add support for panic device
panic device is a device that enables libvirt to receive notification
of guest panic event.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-12 21:17:26 -07:00
Hu Tao
f1a039ef57 conf: introduce generic ISA address
For example:
<address type='isa' iobase='0x505' irq='0x1'/>

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-12 21:11:21 -07:00
Peter Krempa
be904e4eeb conf: Fix XML formatting of RNG device info
https://bugzilla.redhat.com/show_bug.cgi?id=1035118

When outputting the XML for the RNG device, the code didn't format the
PCI address info. Additionally the schema wasn't expecting the info
although it was being parsed and used internally. Fix those mistakes and
add test for the PCI info section.
2013-12-06 11:03:56 +01:00
Peter Krempa
e0dc851164 qemu: Add support for paravirtual spinlocks in the guest
The linux kernel recently added support for paravirtual spinlock
handling to avoid performance regressions on overcomitted hosts. This
feature needs to be turned in the hypervisor so that the guest OS is
notified about the possible support.

This patch adds a new feature "paravirt-spinlock" to the XML and
supporting code to enable the "kvm_pv_unhalt" pseudo CPU feature in
qemu.

https://bugzilla.redhat.com/show_bug.cgi?id=1008989
2013-11-08 09:44:42 +01:00
Ján Tomko
eab51940bd Allow root directory in filesystem source dir schema
Use absDirPath instead of absFilePath.

https://bugzilla.redhat.com/show_bug.cgi?id=1028107
2013-11-07 18:43:15 +01:00
Peter Krempa
c4caa012c2 schema: Rename option 'hypervtristate' to 'featurestate'
Change the RelaxNG schema option name so that it can be reused for
non-hyperv feature flags.
2013-10-15 16:42:45 +02:00
Ján Tomko
3f029fb531 LXC: Fix handling of RAM filesystem size units
Since 76b644c when the support for RAM filesystems was introduced,
libvirt accepted the following XML:
<source usage='1024' unit='KiB'/>

This was parsed correctly and internally stored in bytes, but it
was formatted as (with an extra 's'):
<source usage='1024' units='KiB'/>
When read again, this was treated as if the units were missing,
meaning libvirt was unable to parse its own XML correctly.

The usage attribute was documented as being in KiB, but it was not
scaled if the unit was missing. Transient domains still worked,
because this was balanced by an extra 'k' in the mount options.

This patch:
Changes the parser to use 'units' instead of 'unit', as the latter
was never documented (fixing persistent domains) and some programs
(libvirt-glib, libvirt-sandbox) already parse the 'units' attribute.

Removes the extra 'k' from the tmpfs mount options, which is needed
because now we parse our own XML correctly.

Changes the default input unit to KiB to match documentation, fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1015689
2013-10-09 17:44:45 +02:00
Laine Stump
b83d26f6c4 qemu: support ich9-intel-hda audio device
This resolves one of the issues in:

   https://bugzilla.redhat.com/show_bug.cgi?id=1003983

This device is identical to qemu's "intel-hda" device (known as "ich6"
in libvirt), but has a different PCI device ID (which matches the ID
of the hda audio built into the ich9 chipset, of course). It's not
supported in earlier versions of qemu, so it requires a capability
bit.
2013-09-25 10:38:02 -04:00
Doug Goldstein
4b5652d0dc Allow <source> for type=block to have no dev
Currently the XML parser already allows the following syntax:
  <disk type='block' device='cdrom'>
    <source startupPolicy='optional'/>
    <target dev='hda' bus='ide'/>
    <address type='drive' controller='0' bus='0' target='0' unit='0'/>
  </disk>

But it if the dev value is NULL then it would not have the leading
"<source ", resulting in invalid XML.
2013-09-17 14:10:40 -05:00
Aline Manera
8ffe1d0c46 Add tftp protocol support for cdrom disk
qemu/KVM also supports a tftp URL while specifying the cdrom ISO image.

The xml should be as following:

    <disk type='network' device='cdrom'>
      <source protocol='tftp' name='/url/path'>
        <host name='host.name' port='69'/>
      </source>
    </disk>

Signed-off-by: Aline Manera <alinefm@br.ibm.com>
2013-09-17 14:45:02 +01:00
Aline Manera
0f24393e60 Add ftps protocol support for cdrom disk
The ftps protocol is another protocol supported by qemu/KVM while specifying
the cdrom ISO image.

The xml should be as following:

    <disk type='network' device='cdrom'>
      <source protocol='ftps' name='/url/path'>
        <host name='host.name' port='990'/>
      </source>
    </disk>

Signed-off-by: Aline Manera <alinefm@br.ibm.com>
2013-09-17 14:45:02 +01:00
Aline Manera
d9dd981801 Add https protocol support for cdrom disk
The https protocol is also accepted by qemu/KVM when specifying the cdrom ISO
image.

The xml should be as following:

    <disk type='network' device='cdrom'>
      <source protocol='https' name='/url/path'>
        <host name='host.name' port='443'/>
      </source>
    </disk>

Signed-off-by: Aline Manera <alinefm@br.ibm.com>
2013-09-17 14:45:02 +01:00
Cole Robinson
3730353f63 domain_conf: Add disk bus=sd, wire it up for qemu
This corresponds to '-sd' and '-drive if=sd' on the qemu command line.
Needed for many ARM boards which don't provide any other way to
pass in storage.
2013-09-02 16:53:40 -04:00
Cole Robinson
7c9617641d qemu: Don't add default memballoon device on ARM
And add test cases for a basic working ARM guest.
2013-09-02 16:53:39 -04:00
Fred A. Kemp
feba2febce qemu: Support setting the 'removable' flag for USB disks
Add an attribute named 'removable' to the 'target' element of disks,
which controls the removable flag. For instance, on a Linux guest it
controls the value of /sys/block/$dev/removable. This option is only
valid for USB disks (i.e. bus='usb'), and its default value is 'off',
which is the same behaviour as before.

To achieve this, 'removable=on' (or 'off') is appended to the '-device
usb-storage' parameter sent to qemu when adding a USB disk via
'-disk'. A capability flag QEMU_CAPS_USB_STORAGE_REMOVABLE was added
to keep track if this option is supported by the qemu version used.

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=922495
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2013-09-02 14:45:38 +02:00
Ján Tomko
01cda91809 Add pcihole64 element to root PCI controllers
<controller type='pci' index='0' model='pci-root'>
  <pcihole64 unit='KiB'>1048576</pcihole64>
</controller>

It can be used to adjust (or disable) the size of the 64-bit
PCI hole. The size attribute is in kilobytes (different unit
can be specified on input), but it gets rounded up to
the nearest GB by QEMU.

Disabling it will be needed for guests that crash with the
64-bit PCI hole (like Windows XP), see:
https://bugzilla.redhat.com/show_bug.cgi?id=990418
2013-08-27 17:42:29 +02:00
Aline Manera
796513d7cc Add ftp protocol support for cdrom disk
The ftp protocol is already recognized by qemu/KVM so add this support to
libvirt as well.
The xml should be as following:

     <disk type='network' device='cdrom'>
       <source protocol='ftp' name='/url/path'>
         <host name='host.name' port='21'/>
       </source>
     </disk>

Signed-off-by: Aline Manera <alinefm@br.ibm.com>
2013-08-27 14:50:24 +02:00
Aline Manera
3485ce4e9d Add http protocol support for cdrom disk
QEMU/KVM already allows a HTTP URL for the cdrom ISO image so add this support
to libvirt as well.
The xml should be as following:

    <disk type='network' device='cdrom'>
      <source protocol='http' name='/url/path'>
        <host name='host.name' port='80'/>
      </source>
    </disk>

Signed-off-by: Aline Manera <alinefm@br.ibm.com>
2013-08-27 14:50:24 +02:00
Jiri Denemark
8a38db0dd9 schema: Allow dots in device aliases
Commit 01b88127 changed aliases for PCI controller devices to "pcie.0" or
"pci.%u". Thus device aliases may now contain dots.
2013-08-26 15:26:49 +02:00
Eric Blake
0f082e699e selinux: distinguish failure to label from request to avoid label
https://bugzilla.redhat.com/show_bug.cgi?id=924153

Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with
an attribute relabel='no' in order to try and minimize the
impact of shutdown delays when an NFS server disappears.  The idea
was that if a disk is on NFS and can't be labeled in the first
place, there is no need to attempt the (no-op) relabel on domain
shutdown.  Unfortunately, the way this was implemented was by
modifying the domain XML so that the optimization would survive
libvirtd restart, but in a way that is indistinguishable from an
explicit user setting.  Furthermore, once the setting is turned
on, libvirt avoids attempts at labeling, even for operations like
snapshot or blockcopy where the chain is being extended or pivoted
onto non-NFS, where SELinux labeling is once again possible.  As
a result, it was impossible to do a blockcopy to pivot from an
NFS image file onto a local file.

The solution is to separate the semantics of a chain that must
not be labeled (which the user can set even on persistent domains)
vs. the optimization of not attempting a relabel on cleanup (a
live-only annotation), and using only the user's explicit notation
rather than the optimization as the decision on whether to skip
a label attempt in the first place.  When upgrading an older
libvirtd to a newer, an NFS volume will still attempt the relabel;
but as the avoidance of a relabel was only an optimization, this
shouldn't cause any problems.

In the ideal future, libvirt will eventually have XML describing
EVERY file in the backing chain, with each file having a separate
<seclabel> element.  At that point, libvirt will be able to track
more closely which files need a relabel attempt at shutdown.  But
until we reach that point, the single <seclabel> for the entire
<disk> chain is treated as a hint - when a chain has only one
file, then we know it is accurate; but if the chain has more than
one file, we have to attempt relabel in spite of the attribute,
in case part of the chain is local and SELinux mattered for that
portion of the chain.

* src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new
member.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML):
Parse it, for live images only.
(virSecurityDeviceLabelDefFormat): Output it.
(virDomainDiskDefParseXML, virDomainChrSourceDefParseXML)
(virDomainDiskSourceDefFormat, virDomainChrDefFormat)
(virDomainDiskDefFormat): Pass flags on through.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip
when possible.
(virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not
norelabel, if labeling fails.
(virSecuritySELinuxSetFileconHelper): Fix indentation.
* docs/formatdomain.html.in (seclabel): Document new xml.
* docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml:
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml:
New test files.
* tests/qemuxml2argvtest.c (mymain): Run the new tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-20 10:39:03 -06:00
Guannan Ren
93319da42c conf: add startupPolicy attribute for harddisk
Add startupPolicy attribute for harddisk with type "file",
"block" and "dir". 'requisite' is not supported currently for
harddisk.
2013-08-07 14:31:34 +08:00
Laine Stump
62ac6b4354 qemu: add dmi-to-pci-bridge controller
This PCI controller, named "dmi-to-pci-bridge" in the libvirt config,
and implemented with qemu's "i82801b11-bridge" device, connects to a
PCI Express slot (e.g. one of the slots provided by the pcie-root
controller, aka "pcie.0" on the qemu commandline), and provides 31
*non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31.

Any time a machine is defined which has a pcie-root controller
(i.e. any q35-based machinetype), libvirt will automatically add a
dmi-to-pci-bridge controller if one doesn't exist, and also add a
pci-bridge controller. The reasoning here is that any useful domain
will have either an immediate (startup time) or eventual (subsequent
hot-plug) need for a standard PCI slot; since the pcie-root controller
only provides PCIe slots, we need to connect a dmi-to-pci-bridge
controller to it in order to get a non-hot-plug PCI slot that we can
then use to connect a pci-bridge - the slots provided by the
pci-bridge will be both standard PCI and hot-pluggable.

Since pci-bridge devices themselves can not be hot-plugged into a
running system (although you can hot-plug other devices into a
pci-bridge's slots), any new pci-bridge controller that is added can
(and will) be plugged into the dmi-to-pci-bridge as long as it has
empty slots available.

This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST"
to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit
the automatically added dmi-to-pci-bridge and pci-bridge devices, and
the "after" xml can include it - this way we are testing if libvirt is
properly adding these devices.
2013-08-05 15:40:49 -04:00
Laine Stump
48a3f48ac5 qemu: add pcie-root controller
This controller is implicit on q35 machinetypes. It provides 31 PCIe
(*not* PCI) slots as controller 0.

Currently there are no devices that can connect to pcie-root, and no
implicit pci controller on a q35 machine, so q35 is still
unusable. For a usable q35 system, we need to add a
"dmi-to-pci-bridge" pci controller, which can connect to pcie-root,
and provides standard pci slots that can be used to connect other
devices.
2013-08-05 15:13:56 -04:00
John Ferlan
c00b2f0dd1 conf: Introduce new XML tag "mode" for disk source
There are two ways to use a iSCSI LUN as disk source for qemu.

 * The LUN's path as it shows up on host, e.g.
   /dev/disk/by-path/ip-$ip:3260-iscsi-$iqn-fc18:iscsi.iscsi0-lun-1

 * The libiscsi URI from the storage pool source element host attribute, e.g.
   iscsi://demo.org:6000/iqn.1992-01.com.example/1

For a "volume" type disk, if the specified "pool" is of iscsi
type, we should support to use the LUN in either of above 2 ways.
That's why to introduce a new XML tag "mode" for the disk source
(libvirt should support iscsi pool with libiscsi, but it's another
new feature, which should be done later).

The "mode" can be either of "host" or "direct". Use "host" to indicate
use of the LUN with the path as it shows up on host. Use "direct" to
indicate to use it with the source pool host URI (future patches may support
to use network type libvirt storage too, e.g. Ceph)
2013-07-22 14:01:04 -04:00
John Ferlan
9ed3a5ca34 Add 'period' for Memballoon statistics gathering capability
Add a period in seconds to allow/enable statistics gathering from the
Balloon driver for 'virsh dommemstat <domain>'.
2013-07-16 08:44:52 -04:00
Ján Tomko
2e4dd4107e conf: don't check hyperv spinlock retries if disabled
<hyperv>
  <spinlocks state='off'/>
</hyperv>

results in:
error: XML error: missing HyperV spinlock retry count

Don't require retries when state is off and use virXPathUInt
instead of virXPathString to simplify parsing.

https://bugzilla.redhat.com/show_bug.cgi?id=784836#c19
2013-07-04 18:39:56 +02:00
Gao feng
6c30ea2c35 LXC: Introduce New XML element for user namespace
This patch introduces new element <idmap> for
user namespace. for example
<idmap>
    <uid start='0' target='1000' count='10'/>
    <gid start='0' target='1000' count='10'/>
</idmap>

this new element is used for setting proc files
/proc/<pid>/{uid_map,gid_map}.

This patch also supports multiple uid/gid elements
setting in XML configuration.

We don't support the semi configuation, user has to
configure uid and gid both.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
2013-07-02 11:20:04 +01:00
Ján Tomko
800b51d7b0 conf: add vapic and spinlocks to hyperv features
Add new CPU features for HyperV:
vapic for virtual APIC support
spinlocks for setting spinlock support

<features>
  <hyperv>
    <vapic state='on'/>
    <spinlocks state='on' retries='4096'/>
  </hyperv>
</features>

https://bugzilla.redhat.com/show_bug.cgi?id=784836
2013-06-21 12:33:46 +02:00
Claudio Bley
12edde5cbb schema: simplify RNG pattern, remove superfluous <optional> 2013-06-12 16:14:44 +02:00
Michal Privoznik
7e744f8199 Introduce /domain/devices/interface/driver/@queues attribute
This attribute is going to represent number of queues for
multique vhost network interface. This commit implements XML
extension part of the feature and add one test as well. For now,
we can only do xml2xml test as qemu command line generation code
is not adapted yet.
2013-05-22 16:31:27 +02:00
Guannan Ren
2a58d07654 conf: add 'sharePolicy' attribute to graphics element for vnc
-vnc :5900,share=allow-exclusive
allows clients to ask for exclusive access which is
implemented by dropping other connections Connecting
multiple clients in parallel requires all clients asking
for a shared session (vncviewer: -shared switch)

 -vnc :5900,share=force-shared
disables exclusive client access.  Useful for shared
desktop sessions, where you don't want someone forgetting
specify -shared disconnect everybody else.

 -vnc :5900,share=ignore
completely ignores the shared flag and allows everybody
connect unconditionally
2013-05-22 19:18:43 +08:00
Osier Yang
9049d6a8c7 qemu: Change values of disk discard
QEMU might support more values for "-drive discard", so using Bi-state
values (on/off) for it doesn't make sense.

"on" maps to "unmap", "off" maps to "ignore":

<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem.  Some machine types
may not support discard requests.
</...>
2013-05-17 13:03:25 +08:00
Jiri Denemark
555866389c Add support for locking domain's memory pages
The following XML configuration can be used to request all domain's
memory pages to be kept locked in host's memory (i.e., domain's memory
pages will not be swapped out):

      <memoryBacking>
        <locked/>
      </memoryBacking>
2013-05-16 23:03:08 +02:00
Osier Yang
6765316093 conf: Introduce sgio for hostdev
"sgio" is only valid for scsi host device.
2013-05-17 00:46:44 +08:00
Osier Yang
f2c1d9a804 conf: Introduce <shareable> for hostdev
Unlike disk device, the scsi-generic always writethrough the data,
so no need to introduce a "cache" tag, and set "cache=off".
2013-05-16 23:41:25 +08:00
Osier Yang
a7c4202cdd qemu: Support discard for disk
QEMU introduced "discard" option for drive since commit a9384aff53,

<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem.  Some machine types
may not support discard requests.
</...>

This patch exposes the support in libvirt.

QEMU supported "discard" for "-drive" since v1.5.0-rc0:

% git tag --contains a9384aff53
contains
v1.5.0-rc0
v1.5.0-rc1

So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.
2013-05-15 19:01:00 +08:00
Martin Kletzander
f1ad8d2079 Add VNC WebSocket support
Adding support for new attribute 'websocket' in the '<graphics>'
element, the attribute value is the port to listen on with '-1'
meaning auto-allocation, '0' meaning no websockets.
2013-05-15 09:38:56 +02:00