Use the new API in order to correctly add capability sets to the cache
before parsing XML files
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Two utility functions are introduced for proper initialization and
cleanup of the driver.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The output of that function was not tested until now. In order to keep
the paths in /tmp, the test driver config is "fixed" as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
Commit f7afeddc added code to report to systemd an array of interface
indexes for all tap devices used by a guest. Unfortunately it not only
didn't add code to report the ifindexes for macvtap interfaces
(interface type='direct') or the tap devices used by type='ethernet',
it ended up sending "-1" as the ifindex for each macvtap or hostdev
interface. This resulted in a failure to start any domain that had a
macvtap or hostdev interface (or actually any type other than
"network" or "bridge").
This patch does the following with the nicindexes array:
1) Modify qemuBuildInterfaceCommandLine() to only fill in the
nicindexes array if given a non-NULL pointer to an array (and modifies
the test jig calls to the function to send NULL). This is because
there are tests in the test suite that have type='ethernet' and still
have an ifname specified, but that device of course doesn't actually
exist on the test system, so attempts to call virNetDevGetIndex() will
fail.
2) Even then, only add an entry to the nicindexes array for
appropriate types, and to do so for all appropriate types ("network",
"bridge", and "direct"), but only if the ifname is known (since that
is required to call virNetDevGetIndex().
The function may return NULL if something went wrong. In some places
in the tests we are not checking the return value rather than
accessing the pointer directly resulting in SIGSEGV.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Particularly in qemuBuildNumaArgStr(), there was a need for the advice
due to memory backing, which needs to know the nodeset it will be pinned
to. With newer qemu this caused the following error when starting
domain:
error: internal error: Advice from numad is needed in case of
automatic numa placement
even when starting perfectly valid domain, e.g.:
...
<vcpu placement='auto'>4</vcpu>
<numatune>
<memory mode='strict' placement='auto'/>
</numatune>
<cpu>
<numa>
<cell id='0' cpus='0' memory='524288'/>
<cell id='1' cpus='1' memory='524288'/>
</numa>
</cpu>
...
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138545
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We are not detecting the presence of FIPS from QEMU, but from procfs and
that means it's not QEMU capability. It was decided that we will pass
this flag to QEMU even if it's not supported by old QEMU binaries.
This patch also reverts changes done by commit a21cfb0f to
qemucapabilitestest and implements a new test case in qemuxml2argvtest.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135431
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='. One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The previous OOM testing support would re-run the entire "main"
method each iteration, failing a different malloc each time.
When a test suite has 'n' allocations, the number of repeats
requires is (n * (n + 1) ) / 2. This gets very large, very
quickly.
This new OOM testing support instead integrates at the
virtTestRun level, so each individual test case gets repeated,
instead of the entire test suite. This means the values of
'n' are orders of magnitude smaller.
The simple usage is
$ VIR_TEST_OOM=1 ./qemuxml2argvtest
...
29) QEMU XML-2-ARGV clock-utc ... OK
Test OOM for nalloc=36 .................................... OK
30) QEMU XML-2-ARGV clock-localtime ... OK
Test OOM for nalloc=36 .................................... OK
31) QEMU XML-2-ARGV clock-france ... OK
Test OOM for nalloc=38 ...................................... OK
...
the second lines reports how many mallocs have to be failed, and thus
how many repeats of the test will be run.
If it crashes, then running under valgrind will often show the problem
$ VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest
When debugging problems it is also helpful to select an individual
test case
$ VIR_TEST_RANGE=30 VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest
When things get really tricky, it is possible to request that just
specific allocs are failed. eg to fail allocs 5 -> 12, use
$ VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-12 ../run valgrind ./qemuxml2argvtest
In the worse case, you might want to know the stack trace of the
alloc which was failed then VIR_TEST_OOM_TRACE can be set. If it
is set to 1 then it will only print if it thinks a mistake happened.
This is often not reliable, so setting it to 2 will make it print
the stack trace for every alloc that is failed.
$ VIR_TEST_OOM_TRACE=2 VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-5 ../run valgrind ./qemuxml2argvtest
30) QEMU XML-2-ARGV clock-localtime ... OK
Test OOM for nalloc=36 !virAllocN
/home/berrange/src/virt/libvirt/src/util/viralloc.c:180
virHashCreateFull
/home/berrange/src/virt/libvirt/src/util/virhash.c:144
virDomainDefParseXML
/home/berrange/src/virt/libvirt/src/conf/domain_conf.c:11745
virDomainDefParseNode
/home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12646
virDomainDefParse
/home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12590
testCompareXMLToArgvFiles
/home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:106
virtTestRun
/home/berrange/src/virt/libvirt/tests/testutils.c:250
mymain
/home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:418 (discriminator 2)
virtTestMain
/home/berrange/src/virt/libvirt/tests/testutils.c:750
??
??:0
_start
??:?
FAILED
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any test suite which involves a virDomainDefPtr should
call virDomainDefCheckABIStability with itself just as
a basic sanity check that the identity-comparison always
succeeds. This would have caught the recent NULL pointer
access crash.
Make sure we cope with def->name being NULL since the
VMWare config parser produces NULL names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While trying to debug a failure of virpcitest during 'make distcheck',
I noticed that with a VPATH build, 'cd tests; ./virpcitest' fails for
an entirely different reason. To reproduce the distcheck failure, I
had to run 'cd tests; abs_srcdir=/path/to/src ./virpcitest'. But we
document in HACKING that all of our tests are supposed to be runnable
without requiring extra environment variables.
The solution: hardcode the location of srcdir into the just-built
binaries, rather than requiring make to prepopulate environment
variables. With this, './virpcitest' passes even in a VPATH build
(provided that $(srcdir) is writable; a followup patch will fix the
conditions required by 'make distcheck'). [Note: the makefile must
still pass on directory variables to the test environment of shell
scripts, since those aren't compiled. So while this solves the case
of a compiled test, it still requires environment variables to pass
a VPATH build of any shell script test case that relies on srcdir.]
* tests/Makefile.am (AM_CFLAGS): Define abs_srcdir in all compiled
tests.
* tests/testutils.h (abs_srcdir): Quit declaring.
* tests/testutils.c (virtTestMain): Rely on define rather than
environment variable.
* tests/virpcimock.c (pci_device_new_from_stub): Rely on define.
* tests/cputest.c (mymain): Adjust abs_top_srcdir default.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxmlnstest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since 0d70656afd, it starts to access the sysfs files to build
the qemu command line (by virSCSIDeviceGetSgName, which is to find
out the scsi generic device name by adpater🚌target:unit), there
is no way to work around, qemu wants to see the scsi generic device
like "/dev/sg6" anyway.
And there might be other places which need to access sysfs files
when building qemu command line in future.
Instead of increasing the arguments of qemuBuildCommandLine, this
introduces a new callback for qemuBuildCommandLine, and thus tests
can register their own callbacks for sysfs test input files accessing.
* src/qemu/qemu_command.h: (New callback struct
qemuBuildCommandLineCallbacks;
extern buildCommandLineCallbacks)
* src/qemu/qemu_command.c: (wire up the callback struct)
* src/qemu/qemu_driver.c: (Use the new syntax of qemuBuildCommandLine)
* src/qemu/qemu_hotplug.c: Likewise
* src/qemu/qemu_process.c: Likewise
* tests/testutilsqemu.[ch]: (Helper testSCSIDeviceGetSgName;
callback struct testCallbacks;)
* tests/qemuxml2argvtest.c: (Use testCallbacks)
* src/tests/qemuxmlnstest.c: (Like above)
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
This patch removes the defaultDiskDriverName from the virCaps
structure. This particular default value is used only in the qemu driver
so this patch uses the recently added callback to fill the driver name
if it's needed instead of propagating it through virCaps.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virQEMUDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virQEMUDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virQEMUDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.
NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove the obsolete 'qemud' naming prefix and underscore
based type name. Introduce virQEMUDriverPtr as the replacement,
in common with LXC driver naming style
When XML for a new guest is received, the machine type is
immediately canonicalized into the version specific name.
This involves probing QEMU for supported machine types.
Replace this probing with a lookup of the machine types
in the (hopefully cached) qemuCapsPtr object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove all use of the existing APIs for querying QEMU
capability flags. Instead obtain a qemuCapsPtr object
from the global cache. This avoids the execution of
'qemu -help' (and related commands) when launching new
guests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current qemu capabilities are stored in a virBitmapPtr
object, whose type is exposed to callers. We want to store
more data besides just the flags, so we need to move to a
struct type. This object will also need to be reference
counted, since we'll be maintaining a cache of data per
binary. This change introduces a 'qemuCapsPtr' virObject
class. Most of the change is just renaming types and
variables in all the callers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This converts the following public API datatypes to use the
virObject infrastructure:
virConnectPtr
virDomainPtr
virDomainSnapshotPtr
virInterfacePtr
virNetworkPtr
virNodeDevicePtr
virNWFilterPtr
virSecretPtr
virStreamPtr
virStorageVolPtr
virStoragePoolPtr
The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.
* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c, src/storage/storage_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
to use virObjectUnref/virObjectRef
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrote the device assignment parts in tests to use qemuDomainAssignAddresses.
This way the tests will work for new device address types as they show
up in the future (like s390 device types).
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Currently non-x86 guests must have <acpi/> defined in <features> to
prevent libvirt from running qemu with -no-acpi. Although it works, it
is a hack.
Instead add a capability flag which indicates whether qemu understands
the -no-acpi option. Use it to control whether libvirt emits -no-acpi.
Current versions of qemu always display -no-acpi in their help output,
so this patch has no effect. However the development version of qemu
has been modified such that -no-acpi is only displayed when it is
actually supported.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
In preparation for code re-organization, rename the Macvtap
management APIs to have the following patterns
virNetDevMacVLanXXXXX - macvlan/macvtap interface management
virNetDevVPortProfileXXXX - virtual port profile management
* src/util/macvtap.c, src/util/macvtap.h: Rename APIs
* src/conf/domain_conf.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_command.h,
src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
src/qemu/qemu_process.h: Update for renamed APIs
This patch is rather cosmetic as it only moves device alias
assignation from command line construction just before that.
However, it is needed in connotation of previous and next patch.
Add test cases for parsing the qemu-name-space.
This is based on qemuxml2argv{test,data/}, but can not reside in
qemuxml2argv{test,data/} because ...
1. qemuxmlns-qemu-ns-domain.xml is not schema-valid and breaks
domainschematest. The test is still important to detect xmlns:qemu
bindings to a name-space other than
http://libvirt.org/schemas/domain/qemu/1.0
2. they break qemuxml2xml, because the xmlns:qemu binding is moved to
the top-level <domain> element when converting from argv to xml.
Signed-off-by: Philipp Hahn <hahn@univention.de>
