Instead of creating an empty object and then setting keys one
at a time, it is possible to pass a dict object to
configuration_data(). This is nicer because it doesn't require
repeating the name of the cfg_data object over and over.
There is one exception: the 'conf' object, where we store values
that are used directly by C code. In that case, using a dict
object is not feasible for two reasons: first of all, replacing
the set_quoted() calls would result in awkward code with a lot
of calls to format(); moreover, since code that modifies it is
sprinkled all over the place, refactoring it would probably
make things more complicated rather than simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
I've came across an aarch64 system which supports hugepages up to
16GiB of size. However, I was unable to allocate them using
virsh allocpages. This is because cmdAllocpages() uses
vshCommandOptScaledInt(), which scales passed value into bytes,
but since the virNodeAllocPages() expects size in KiB the
variable holding bytes is then divided by 1024. However, the
limit for the biggest value passed to vshCommandOptScaledInt() is
UINT_MAX which is now obviously wrong, as it needs to be UINT_MAX
* 1024.
The same bug is in completer. But here, let's use ULLONG_MAX so
that we don't have to care about it anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have a function that generates string list for given
enum, let's use that instead of open coding it.
Note, after this there are still some 'candidates' left (e.g,
virshNetworkEventNameCompleter(), or
virshNetworkUpdateCommandCompleter()). These are not converted
because either they don't have a convenient int2str function or
they don't start from the very beginning of the enum.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We have plenty of completers which iterate over all values of
given enum and do nothing more than translate every member into
string (using corresponding virXXXTypeToString()).
Introduce a convenience function so that callers can pass just
VIR_XXX_LAST and virXXXTypeToString and the rest is taken care
of.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
A completer must return a NULL terminated list of strings, which
means that when dealing with enums, it has to allocate one
pointer more than the value of VIR_XXX_LAST. But this is not
honoured in virshDomainInterfaceSourceModeCompleter() leading to
out of bounds read.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/9
Signed-off-by: Haonan Wang <hnwanga1@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We are not guaranteed that the string we are printing onto stdout
contains '\n' and thus that the stdout is flushed. In fact, I've
met this problem when virsh asked me whether I want to edit the
domain XML again (vshAskReedit()) but the prompt wasn't displayed
(as it does not contain a newline character) and virsh just sat
there waiting for my input, I sat there waiting for virsh's
output. Flush stdout after all fputs()-s which do not flush
stdout.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This uses the right type that is expected to make it work even on platforms
where gint64 != quad_t.
Due to indentation changes it is best to view this patch with -w.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically the use of the '-desc' multiple argument parameter was not
forbidden toghether with '-edit', but use of both together has some
unexpected behaviour. Specifically the editor is filled with the
contents passed via '-desc' but if the user doesn't change the text in
any way virsh will claim that the description was not chaged even if it
differs from the currently set description. Similarly, when the user
would edit the description provided via 'desc' so that it's identical
with the one configured for the domain, virsh would claim that it was
updated:
# virsh desc cd
No description for domain: cd
# EDITOR=true virsh desc cd --edit "test desc"
Domain description not changed
After the fix:
# virsh desc cd
No description for domain: cd
# EDITOR=true virsh desc cd --edit "test desc"
Domain description updated successfully
# EDITOR=true virsh desc cd --edit "test desc"
Domain description not changed
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The vsh helpers for user-editing of contents use temporary files.
Introduce 'vshTempFile' type which automatically removes the file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The getters have a different set of flags. Add a variable for the getter
to avoid having to construct flags when calling the getter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of having two ad-hoc places which decide whether the original
flags can be used add another variable specifically for flags used for
query.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unconditionally format the start of the query ('?') and make delimiters
('&') part of the arguments. At the end we can trim off 1 char from the
end of the buffer unconditionally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the temporary variables holding the
data extracted from the XML.
The code in this function was originally extracted from a loop so we can
also drop pre-clearing of the pointers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the code so that the function is not as massive. Note that this
is a minimal extraction which does not clean up the code meant for
looping.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code registering the event handlers in 'cmdEvent' had too many
blocks of code conditional on whether just one event is being listened
to or all events.
The code can be greatly simplified by uniting the code paths and having
only one branch when filling the list of events we want to listen for.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'cmdEvent' along with all the helper functions it needs is ~950 LOC.
Move it out from virsh-domain.c to virsh-domain-event.c along with the
completer function so that the new module doesn't have to expose any new
types.
Semantically this creates a new category in 'virsh help' but all other
behaviour stays the same.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper function is used in virshBlockJobInfo and also in the
callbacks of cmdEvent. Upcoming patch is going to move out the event
code into a helper so this needs to be in a shared place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the invocation of the virDomainCreate(WithFiles/Flags) APIs
based on the arguments into if-else instead of (nested) ternary
operators.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the formatting of the block copy target xml using
virXMLFormatElement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Require the option name for this argument as otherwise a part of the
'cmd' argument will be claimed.
Fixes: 43edde82af
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since libvirt-guests script/service can operate on various URIs and we do
support both socket activation and traditional services, the ordering should be
specified for all the possible sockets and services.
Also remove the Wants= dependency since do not want to start any service. We
cannot know which one libvirt-guests is configured, so we'd have to start all
the daemons which would break if unused colliding services are not
masked (libvirtd.service in the modular case and all the modular daemon service
units in the monolithic scenario). Fortunately we can assume that the system is
configured properly to start services/sockets that are of interest to the user.
That also works with the setup described in https://libvirt.org/daemons.html .
To make it even more robust we add the daemon service into the machine units
created for individual domains as it was missing there.
https://bugzilla.redhat.com/show_bug.cgi?id=1868537
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend domdirtyrate-calc virsh api with mode option, either
of these three options "page-sampling,dirty-bitmap,dirty-ring"
can be specified when calculating dirty page rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Calculate the length of the FD list beforehand to avoid multiple
expansions and mainly simplify the code and use automatic freeing to
remove the error code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adding an exception for the whole file usually defeats the purpose of a
syntax check and is also likely to get forgotten once the file is
removed.
In case of the suggestion of using 'safewrite' instead of write even the
comment for safewrite states that the function needs to be used only in
certain cases.
Remove the blanket exceptions for files and use an exclude string
instead. The only instance where we keep the full file exception is for
src/libvirt-stream.c as there are multiple uses in example code in
comments where I couldn't find a nicer targetted wapproach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This wires up support for resetting NVRAM for all APIs that allow
this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This change was generated using the following spatch:
@ rule1 @
expression a;
identifier f;
@@
<...
- f(*a);
... when != a;
- *a = NULL;
+ g_clear_pointer(a, f);
...>
@ rule2 @
expression a;
identifier f;
@@
<...
- f(a);
... when != a;
- a = NULL;
+ g_clear_pointer(&a, f);
...>
Then, I left some of the changes out, like tools/nss/ (which
doesn't link with glib) and put back a comment in
qemuBlockJobProcessEventCompletedActiveCommit() which coccinelle
decided to remove (I have no idea why).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already exit if they are not present.
Report an error, but do not mark them as required in case a future
version of this command will want to accept a different set of
parameters.
https://bugzilla.redhat.com/show_bug.cgi?id=2046024
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They way our VIR_ENUM_IMPL() and virXXXTypeFromString() work is
that for any string that's not recognized a negative one is
returned. And, since VIR_XXX_LAST is passed to VIR_ENUM_IMPL() we
can be sure that all enum members are covered. Therefore, there
is no way that virXXXTypeFromString() can return a value that's
bigger or equal to VIR_XXX_LAST.
I've noticed two places where such comparison was made, both in
cmdNetworkUpdate(). Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
sysconfig files are owned by the admin of the host. They have the
liberty to put anything they want into these files. This makes it
difficult to provide different built-in defaults.
Remove the sysconfig file and place the current desired default into
the service file.
Local customizations can now go either into /etc/sysconfig/name
or /etc/systemd/system/name.service.d/my-knobs.conf
Attempt to handle upgrades in libvirt.spec.
Dirty files which are marked as %config will be renamed to file.rpmsave.
To restore them automatically, move stale .rpmsave files away, and
catch any new rpmsave files in %posttrans.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
