Add new <disk> model values for virtio transitional devices. When
combined with bus='virtio':
* "virtio-transitional" maps to qemu "virtio-blk-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-blk-pci-non-transitional"
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Introduced by d86c876a66.
There is no real need to have "user-" prefix for chardev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
QEMU accidentally exposed the id of -drive (or same value as disk
serial, if provided) in one of the identifiers visible from the guest.
To avoid regression in case when -blockdev will be used we need to
always specify it ourselves.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For SCSI, IDE, and AHCI cdroms the appropriate device types which select
the correct media are used. In qemu there's one other code path that
looks at -drive media=cdrom in the XEN pv code. Thankfully we don't
support it with qemu (see qemuBuildDiskDeviceStr). All other devices
ignore it as the comment states, thus we can drop that code.
The test fallout is expectedly only in the test added for uncommon cdrom
types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Cast disk->bus to proper type and add missing values to the enum so it's
more obvious what types are supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of ide-disk into the two separate devices was introduced by
qemu commit 1f56e32a7f4b3 released in qemu v0.15.
Note that when compared to the previous commit which made sure that no
disk related tests were touched, in this case it's not as careful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of scsi-disk into the two separate devices was introduced by
qemu commit b443ae67 released in qemu v0.15.
All changes to test files are not really related to disk testing thanks
to previous refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
In commit f80eae8c2a I was too agresive in removing properties of
-drive for empty drives. It turns out that qemu actually persists the
state of 'readonly' and the throttling information even for the empty
drive.
Removing 'readonly' thus made qemu open any subsequent images added via
the 'change' command as RW which was forbidden by selinux thanks to the
restrictive sVirt label for readonly media.
Fix this by formating the property again and bump the tests and leave a
note detailing why the rest of the properties needs to be skipped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.
Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.
While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The virDomainDeviceInfo parameter is a large struct so it is preferrable
to pass it by reference instead of by value.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use qemuBuildControllersCommandLine since it builds the command line
for (nearly) all controllers, not just one.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now that the inner loop does not require any other variables,
it can be easily separated. Apart from reducing the indentation
level this will allow it to be called from different code paths.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now that it's no longer needed, remove the argument.
This removes the last helper variable in
qemuBuildControllerDevCommandLine.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
qemuBuildLegacyUSBControllerCommandLine is the only place where
we need to count the USB controllers.
Count them again instead of keeping track in a variable passed to
qemuBuildControllerDevStr.
This removes the need for another variable in the loop in
qemuBuildControllerDevCommandLine.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Count them in qemuBuildLegacyUSBControllerCommandLine to remove
yet another variable accessed from the loop in
qemuBuildControllerDevCommandLine.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This removes the need to mark it in the 'usbcontroller' variable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Move out the code formatting "-usb" on the QEMU command line.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Switch qemuBuildVirtioDevStr to use virDomainDeviceSetData: callers
pass in the virDomainDeviceType and the void * DefPtr. This will
save us from having to repeatedly extend the function argument
list in subsequent patches.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Current code essentially duplicates the same logic, but misses
some cases (like vhost-vsock-device).
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The vhost-scsi device string should depend on the requested
address type, not strictly on the emulated arch. This is the
same logic used by qemuBuildVirtioDevStr, and this particular
path is already tested in the hostdev-scsi-vhost-scsi-ccw tests
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Move the rng->model == VIRTIO check to parse time. This also
allows us to remove similar checks throughout the qemu driver
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
If we validate that memballoon is NONE|VIRTIO at parse time,
we can drop similar checks elsewhere in the qemu driver
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This will be extended in the future, so let's simplify things by
centralizing the checks.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Use the password stored in the secret driver under
the uuid specified by the vnc_tls_x509_secret_uuid
option in qemu.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=1602418
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Instead of hardcoding the TLS creds alias in
qemuBuildGraphicsVNCCommandLine, store it
in the domain private data.
Given that we only support one VNC graphics
and thus have only one alias per-domain,
this is overengineered, but it will allow us
to prepare the secret upfront when we start
supporting encrypted server TLS keys.
Note that the alias is not formatted anywhere
since we won't need to access it after domain
startup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If a -drive has no image, using image properties makes qemu whine that
they should not be used.
This patch stops formating cache/readonly/... for empty drives
for the pre-blockdev syntax. Unfortunately those parameters can't be
added later when inserting media, but on the other hand qemu will start
with an empty drive.
Since we already were able to start a VM with such config previously due
to qemu ignoring them I've opted just to skip formatting them.
Additionally with -blockdev support it will work as expected as the
image properties will be formatted when adding the image itself which is
not possible without it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1651457
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
According to the result parsing from xml, add the unarmed property
into QEMU command line:
-device nvdimm,...[,unarmed=on]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
According to the result parsing from xml, add pmem property
into QEMU command line:
-object memory-backend-file,...[,pmem=on]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
According to the result parsing from xml, add align property
into QEMU command line:
-object memory-backend-file,...[,align=xxx]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1624223
There are two ways to request memory preallocation on cmd line:
-mem-prealloc and .prealloc attribute for a memory-backend-file.
However, as it turns out it's not safe to use both at the same
time. If -mem-prealloc is used then qemu will fully allocate the
memory (this is done by actually touching every page that has
been allocated). Then, if .prealloc=yes is specified,
mbind(flags = MPOL_MF_STRICT | MPOL_MF_MOVE) is called which:
a) has to (possibly) move the memory to a different NUMA node,
b) can have no effect when hugepages are in play (thus ignoring user
request to place memory on desired NUMA nodes).
Prefer -mem-prealloc as it is more backward compatible
compared to switching to "-numa node,memdev= + -object
memory-backend-file".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
So far we have two arguments that we are passing to
qemuBuildMemoryBackendProps() and that are taken from domain
private data: @qemuCaps and @autoNodeset. In the next commit I
will use one more item from there. Therefore, instead of having
it as yet another argument to the function, pass pointer to the
private data object.
There is one change in qemuDomainAttachMemory() where previously
@autoNodeset was NULL but now is priv->autoNodeset (which may be
set). This is safe to do as @autoNodeset is advisory only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The way that the code is currently written makes my eyes hurt.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Depending on whether QEMU actually supports the option, we can put the
'rendernode' on the '-display egl-headless' cmdline.
https://bugzilla.redhat.com/show_bug.cgi?id=1628892
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We're going to need a bit more logic for egl-headless down the road so
prepare a helper just like for the other display types.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for armv6l qemu guests has been added.
Tested with arm1176 CPU on x86.
Signed-off-by: Stefan Schallenberg <infos@nafets.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add a new memoryBacking source type "memfd", supported by QEMU (when
the capability is available).
A memfd is a specialized anonymous memory kind. As such, an anonymous
source type could be automatically using a memfd. However, there are
some complications when migrating from different memory backends in
qemu (mainly due to the internal object naming at this point, but
there could be more). For now, it is simpler and safer to simply
introduce a new source type "memfd". Eventually, the "anonymous" type
could learn to use memfd transparently in a separate change.
The main benefits are that it doesn't need to create filesystem files,
and it also enforces sealing, providing a bit more safety.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add new functions to generate zPCI command string and append it to
QEMU command line. And the related tests are added.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Support Hyper-V Enlightened VMCS in domain config. QEMU support will
be implemented in the next patch, adding interim VIR_DOMAIN_HYPERV_EVMCS
cases to src/qemu/* for now.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
QEMU 3.1 supports Hyper-V-style PV IPIs making it cheaper for Windows
guests to send an IPI, especially when it targets many CPUs.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Support Hyper-V PV IPI enlightenment in domain config. QEMU support will
be implemented in the next patch, adding interim VIR_DOMAIN_HYPERV_IPI
cases to src/qemu/* for now.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
When qemuProcessReconnectHelper was introduced (commit d38897a5d)
reconnection failure used VIR_DOMAIN_SHUTOFF_FAILED; however, that
was changed in commit bda2f17d to either VIR_DOMAIN_SHUTOFF_CRASHED
or VIR_DOMAIN_SHUTOFF_UNKNOWN.
When QEMU_CAPS_NO_SHUTDOWN checking was removed in commit fe35b1ad6
the conditional state was just left at VIR_DOMAIN_SHUTOFF_CRASHED.
So introduce qemuDomainIsUsingNoShutdown which will manage the
condition when the domain was started with -no-shutdown so that
when/if reconnection failure occurs we can restore the decision
point used to determine whether CRASHED or UNKNOWN is provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1524230
The qemuBuildVhostuserCommandLine builds command line for
vhostuser type interfaces. It is duplicating some code of the
function it is called from (qemuBuildInterfaceCommandLine)
because of the way it's called. If we merge it into the caller
not only we save a few lines but we also enable checks that we
would have to duplicate otherwise (e.g. QoS availability).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When we have variables A, B, C then there are two ways to free
them. Either in the order they are declared or the reversed one.
Any other ordering is confusing. In this commit I'm reordering
calls to VIR_FREE in the reversed order.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Adjusting domain format documentation, adding device address
support and adding command line generation for vfio-ap.
Since only one mediated hostdev with model vfio-ap is supported a check
disallows to define domains with more than one such hostdev device.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Chris Venteicher <cventeic@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1632833
When doing a SCSI passthrough we don't put format= onto the
command line. This causes qemu to probe the format automatically
which ends up in a warning in the domain log and possible qemu
disabling writes to the first block (according to the warning
message).
Based-on-work-of: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
-net name= will be deprecated in QEMU 3.1:
commit 101625a4d4ac7e96227a156bc5f6d21a9cc383cd
net: Deprecate the "name" parameter of -net
git describe: v3.0.0-791-g101625a4d4
Use the id option instead, supported since QEMU 1.2:
commit 6687b79d636cd60ed9adb1177d0d946b58fa7717
convert net_client_init() to OptsVisitor
git describe: v1.0-3564-g6687b79d63 contains: v1.2.0-rc0~142^2~8
Thankfully, libvirt only uses -net for non-PCI, non-virtio NICs
on ARM.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
My commit d6b8838 fixed the uid:gid for the pre-created UNIX sockets
but did not account for the different umask of libvirtd and QEMU.
Since commit 0e1a1a8c we set umask to '0002' for the QEMU process.
Manually tune-up the permissions to match what we would have gotten
if QEMU had created the socket.
https://bugzilla.redhat.com/show_bug.cgi?id=1633389
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The capability was introduced in QEMU 1.5.0, which is our
minimum supported QEMU version these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.3.1 and we require
QEMU 1.5.0 these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced by QEMU commit 28b77657 in v1.0-rc4~21^2~8.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit c29029d which was included in 1.5.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the bootindex argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the configfd argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
A virtio device such as
<controller type='scsi' model='virtio-scsi'/>
will be translated to one of four different QEMU devices
based on the address type. This behavior is the same for
all virtio devices, but unfortunately we have separate
ad-hoc code dealing with each and every one of them: not
only this is pointless duplication, but it turns out
that most of that code is not robust against new address
types being introduced and some of it is outright buggy.
Introduce a new function, qemuBuildVirtioDevStr(), which
deals with the issue in a generic fashion, and rewrite
all existing code to use it.
This fixes a bunch of issues such as virtio-serial-pci
being used with virtio-mmio addresses and virtio-gpu
not being usable at all with virtio-mmio addresses.
It also introduces a couple of minor regressions,
namely no longer erroring out when attempting to
use virtio-balloon and virtio-input devices with
virtio-s390 addresses; that said, virtio-s390 has
been superseded by virtio-ccw such a long time ago
that recent QEMU releases have dropped support for
the former entirely, so re-implementing such
device-specific validation is not worth it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The appropriate time to ensure the required capabilities are
present is validate rather than command line generation: add
a new qemuDomainDeviceDefValidateInput() function and move
all existing checks there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far we've only formatted it for virtio-blk-pci and
virtio-blk-ccw, but other virtio-blk devices also support
the corresponding option; moreover, we've always formatted
it for all virtio-scsi devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are several functions where we pointlessly duplicate
parts of the format string and pass the same arguments:
refactor them so that the common parts are formatted separately
from the variable parts.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1622455
If a domain is configured to use <source type='file'/> under
<memoryBacking/> we have to honour that setting and produce
-mem-path on the command line. We are not doing so if domain has
no guest NUMA nodes nor hugepages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The struct is called virPCIDeviceAddress and the
functions operating on it should be named accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
None of the existing models is suitable for use with
RISC-V virt guests, and we don't want information about
the serial console to be missing from the XML.
The name is based on comments in qemu/hw/riscv/virt.c:
RISC-V machine with 16550a UART and VirtIO MMIO
and in qemu/hw/char/serial.c:
QEMU 16550A UART emulation
along with the output of dmesg in the guest:
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13,
base_baud= 230400) is a 16550A
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The architecture is new enough that we don't need to
concern ourselves with backwards compatibility in any
capacity.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was usable since qemu 1.3 so we can remove all the
detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Allow mocking of the file descriptor numbers used for the TPM
passthrough mode by extracting the relevant code into an exported
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a helper which will use a collection of other helpers to determine
whether a disk requires throttling to be enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Format the backing chain onto the commandline using the 'json' syntax
with -blockdev.
The command line formatter needs only minor tweaks to add the new
entries but we now need to initialize the structures that are used for
every layer of the backing chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow referring to the drives via the QOM id we need to setup the
floppy drives with a proper ID. This means that -device should be used
for them.
There are the following quirks:
- FDC needs to be instantiated prior to any floppy device
- floppy drive specified via -device does not support 'bootindex'
(hacked around by passing bootindexA=1 to the FDC)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Qemu-3.0 supports Hyper-V-style PV TLB flush, Windows guests can benefit
from this feature as KVM knows which vCPUs are not currently scheduled (and
thus don't require any immediate action).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-3.0 supports so-called 'Reenlightenment' notifications and this (in
conjunction with 'hv-frequencies') can be used make Hyper-V on KVM pass
stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-2.12 gained 'hv-frequencies' cpu flag to enable Hyper-V frequency
MSRs. These MSRs are required (but not sufficient) to make Hyper-V on
KVM pass stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There are some path where the buffer is not passed to
virCommandAddArgBuffer and therefore the buffer might leak.
==191201== 1,010 bytes in 1 blocks are definitely lost in loss record 826 of 836
==191201== at 0x4C2CE3F: malloc (vg_replace_malloc.c:298)
==191201== by 0x4C2F1BF: realloc (vg_replace_malloc.c:785)
==191201== by 0x5D39E82: virReallocN (viralloc.c:245)
==191201== by 0x5D3E8F2: virBufferGrow (virbuffer.c:150)
==191201== by 0x5D3E9C8: virBufferAdd (virbuffer.c:185)
==191201== by 0x56EAC98: qemuBuildFloppyCommandLineControllerOptions (qemu_command.c:2162)
==191201== by 0x56EB3E1: qemuBuildDisksCommandLine (qemu_command.c:2370)
==191201== by 0x570055E: qemuBuildCommandLine (qemu_command.c:10315)
==191201== by 0x575EA7F: qemuProcessCreatePretendCmd (qemu_process.c:6777)
==191201== by 0x113DAB: testCompareXMLToArgv (qemuxml2argvtest.c:598)
==191201== by 0x13A75B: virTestRun (testutils.c:180)
==191201== by 0x138BE8: mymain (qemuxml2argvtest.c:2975)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If a domain has hugepages configured and we're currently building
memory-backend-file for a nvdimm device that domain has we will
put hugepages path onto the command line. It should have been
nvdimm path configured in the XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can safely validate the hugepage nodeset attribute at a define time.
This validation is not done for already existing domains when the daemon
is restarted.
All the changes to the tests are necessary because we move the error
from domain start into XML parse.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Fix regression introduced in <42fd5a58adb>. With q35 machine type which
requires the explicitly specified FDC we'd format twoisa-fdc
controllers to the command line as the code was moved to a place where
it's called per-disk.
Move the call back after formatting all disks and reiterate the disks to
find the floppy controllers.
This also moves the '-global' directive which sets up the default
ISA-FDC to the end after all the disks but since we are modifying the
properties it is safe to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the argument is unused we can remove it transitively from all
the call graphs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was never set except for (stale) tests. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.
There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.
Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use of enum types for struct fields is generally avoided since it causes
warnings if the compiler assumes the enum is unsigned. For example
commit 8e2982b576
Author: Cole Robinson <crobinso@redhat.com>
Date: Tue Jul 24 16:27:54 2018 -0400
conf: Clean up virDomainDefParseCaps
Introduced a line:
if ((def->virtType = virDomainVirtTypeFromString(virttype)) < 0) {
which causes a build failure with CLang
conf/domain_conf.c:19143:65: error: comparison of unsigned enum expression < 0 is always false [-Werror,-Wtautological-compare]
as the compiler is free to optimize away the "< 0" check due to the
assumption that the enum type is unsigned and always in range.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, the functions return a pointer to the
destination buffer on success or NULL on failure.
Not only does this kind of error handling look quite
alien in the context of libvirt, where most functions
return zero on success and a negative int on failure,
but it's also somewhat pointless because unless there's
been a failure the returned pointer will be the same
one passed in by the user, thus offering no additional
value.
Change the functions so that they return an int
instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Use the proper backend for the block device both when using -drive and
when -blockdev will be used for disk drives and floppy disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we've always enabled an emulated video device every time we
see that graphics should be supported with a guest. With the appearance
of mediated devices which can support QEMU's vfio-display capability,
users might want to use such a device as the only video device.
Therefore introduce a new, effectively a 'disable', type for video
device.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since QEMU 2.12, QEMU understands a new vfio-pci device option 'display'
which can be used to turn on display capabilities on vgpu-enabled
mediated devices, IOW emulated GPU devices like QXL will no longer be
needed with vgpu-enable mdevs.
QEMU defaults to 'auto' for the 'display' attribute, which is not
foolproof, so we need to play it safe here and default to display='off'
if this attribute wasn't provided in the XML explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The tls, x509 and x509verify options were deprecated in QEMU v2.5.0:
commit 3e305e4a4752f70c0b5c3cf5b43ec957881714f7
Author: Daniel P. Berrange <berrange@redhat.com>
ui: convert VNC server to use QCryptoTLSSession
Use the tls-creds-x509 object when available.
https://bugzilla.redhat.com/show_bug.cgi?id=1598167
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use the new proper location for the read/write error policy selection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It builds the string for '-device' from a virDomainDiskDef.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Aggregate the code for the two separate formats used according to the
machine type and add some supporting code so that the function is
actually readable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBulildFloppyCommandLineOptions built its own version of the -drive
alias. Replace it by qemuAliasDiskDriveFromDisk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Further split qemuBuildDiskCommandLine to separate formatting of the
source part.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the semantics to exactly opposite and rename it to
qemuDiskBusNeedsDriveArg. This will be necessary as some devices can't
be used with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU uses a shorthand '-sdl' which maps to '-display sdl'. However, if
there are any options to be passed to SDL, the full command version must
be used. Everything seemingly worked for us until commit 5038b30043
introduced OpenGL support for SDL and added ',gl=on/off' option which as
mentioned above could have never worked with the shorthand version of
the command. Indeed starting a domain with an SDL display and OpenGL
enabled, QEMU produces a rather cryptic error:
-sdl: Could not open 'gl=on': No such file or directory
This patch provides fixes to both the SDL cmdline generation and the
test suite.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Adding the 'default' case to our enum-typecasted switches is the current
safety trend, so add it here for mdevs too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It should be the command line helper who takes care of the iteration
rather than the caller.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
After 6b770f9a3b both @netsource and @srcprops are leaked
because of early return introduced in the commit.
==1812== 644 bytes in 4 blocks are definitely lost in loss record 835 of 885
==1812== at 0x4C2F12F: realloc (vg_replace_malloc.c:785)
==1812== by 0x8846393: xmlSaveUriRealloc (in /usr/lib64/libxml2.so.2.9.8)
==1812== by 0x8846B1C: xmlSaveUri (in /usr/lib64/libxml2.so.2.9.8)
==1812== by 0x5DDA619: virURIFormat (viruri.c:256)
==1812== by 0x56E941B: qemuBuildNetworkDriveURI (qemu_command.c:781)
==1812== by 0x56E979A: qemuBuildNetworkDriveStr (qemu_command.c:859)
==1812== by 0x56F3A0B: qemuBuildSCSIiSCSIHostdevDrvStr (qemu_command.c:4664)
==1812== by 0x56F3D1F: qemuBuildSCSIHostdevDrvStr (qemu_command.c:4732)
==1812== by 0x56F57F7: qemuBuildHostdevCommandLine (qemu_command.c:5337)
==1812== by 0x570303A: qemuBuildCommandLine (qemu_command.c:10376)
==1812== by 0x57604EE: qemuProcessCreatePretendCmd (qemu_process.c:6649)
==1812== by 0x11352A: testCompareXMLToArgv (qemuxml2argvtest.c:566)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When support was adding for passing a pre-opened listener socket to UNIX
chardevs, it accidentally passed the listener socket for client mode
chardevs too with predictable amounts of fail resulting. This affects
libvirt when using QEMU >= 2.12
Expand the unit test coverage to validate that we are only doing FD
passing when operating in server mode.
https://bugzilla.redhat.com/show_bug.cgi?id=1598440
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU chardevs have a bug which makes the vhostuser backend complain
about lack of support for FD passing when validating the chardev.
While this is ultimately QEMU's responsibility to fix, libvirt needs to
avoid tickling the bug.
Simply disabling chardev FD passing just for vhostuser's chardev is
the most prudent approach, avoiding need for a QEMU version number
check.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are two boolean parameters passed to qemuBuildChrChardevStr,
and soon there will be a third. It will be clearer to understand
from callers' POV if we use named flags instead.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The vhostuser network backend is only supported with the UNIX domain
socket chardev backend, so passing around chardevStdioLogd is not
required.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we format the serial, geometry and error policy on the -drive
backend argument.
QEMU added the ability to set serial and geometry on the frontend in
the 1.2 release deprecating use of -drive, with support being deleted
from -drive in 3.0.
We keep formatting error policy on -drive for now, because we don't
ahve support for that with -device for usb-storage just yet.
Note that some disk buses (sd) still don't support -device. Although
QEMU allowed these properties to be set on -drive for if=sd, they
have been ignored so we now report an error in this case.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add comma escaping for netsource. This is done here because
qemuBuildNetworkDriveStr has other external callers which
may not expect an escaped comma; however, this particular
command building path needs to perform the escaping for the
hostdev command line, so we do it now to ensure src->path
and src->host->name are covered.
Signed-off-by: Anya Harter <aharter@redhat.com>
This doesn't seem very useful at the moment, but it will make
sense once we introduce another HPT-related setting.
The output XML is decoupled from the input XML in preparation
of future changes as well; while doing so, we can shave a few
lines off the latter.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We're going to introduce a second HPT-related setting soon,
at which point using a single location to store everything is
no longer going to cut it.
This mostly, but not completely, reverts 3dd1eb3b26.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The UNIX socket FDs were we passing to QEMU inherited a label based on
libvirtd's context. QEMU is thus denied ability to access the UNIX
socket. We need to use the security manager to change our current
context temporarily when creating the UNIX socket FD.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
VMs with hardcoded platform network devices are forced to use old
style '-net nic' command line config. Current we use qemu's vlan
option to hook this with the '-netdev' host side of things.
However since qemu 1.2 there is '-net nic,netdev=X' option for
explicitly referencing a netdev ID, which is more inline with
typical VM commandlines, so let's switch to that
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add comma escaping for cfg->spiceTLSx509certdir and
graphics->data.spice.rendernode.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for smartcard->data.cert.file[i] and
smartcard->data.cert.database.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for dev->data.file.path in cases
VIR_DOMAIN_CHR_TYPE_DEV and VIR_DOMAIN_CHR_TYPE_PIPE.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some identifiers use Sev, some SEV. Prefer the latter.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The buffer is not freed anywhere. Nor in the error paths. Also
the usage virCommand with respect to buffer is very odd.
==2504== 1,100 bytes in 1 blocks are definitely lost in loss record 167 of 175
==2504== at 0x4C2CE3F: malloc (vg_replace_malloc.c:298)
==2504== by 0x4C2F1BF: realloc (vg_replace_malloc.c:785)
==2504== by 0x5D32EE2: virReallocN (viralloc.c:245)
==2504== by 0x5D37278: virBufferGrow (virbuffer.c:150)
==2504== by 0x5D3783E: virBufferVasprintf (virbuffer.c:408)
==2504== by 0x5D377A9: virBufferAsprintf (virbuffer.c:381)
==2504== by 0x57017C1: qemuBuildSevCommandLine (qemu_command.c:9707)
==2504== by 0x57030F7: qemuBuildCommandLine (qemu_command.c:10324)
==2504== by 0x575FA48: qemuProcessCreatePretendCmd (qemu_process.c:6644)
==2504== by 0x11351A: testCompareXMLToArgv (qemuxml2argvtest.c:564)
==2504== by 0x1392F7: virTestRun (testutils.c:180)
==2504== by 0x137895: mymain (qemuxml2argvtest.c:2900)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The variable points to a buffer not a domain object therefore its
current name is misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU >= 2.12 provides 'sev-guest' object which is used to launch encrypted
VMs on AMD platform using SEV feature. The various inputs required to
launch SEV guest is provided through the <launch-security> tag. A typical
SEV guest launch command line looks like this:
-object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 ...\
-machine memory-encryption=sev0 \
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The default is stable per machine type so there should be no need to keep that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1469338
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are still hoping all of such checks will be moved there and this is one small
step in that direction.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator'/>
</tpm>
The XML will currently only start a TPM 1.2.
Upon first start, libvirt will run `swtpm_setup`, which will simulate the
manufacturing of a TPM and create certificates for it and write them into
NVRAM locations of the emulated TPM.
After that libvirt starts the swtpm TPM emulator using the `swtpm` executable.
Once the VM terminates, libvirt uses the swtpm_ioctl executable to gracefully
shut down the `swtpm` in case it is still running (QEMU did not send shutdown)
or clean up the socket file.
The above mentioned executables must be found in the PATH.
The executables can either be run as root or started as root and switch to
the tss user. The requirement for the tss user comes through 'tcsd', which
is used for the simulation of the manufacturing. Which user is used can be
configured through qemu.conf. By default 'tss' is used.
The swtpm writes out state into files. The state is kept in /var/lib/libvirt/swtpm:
[root@localhost libvirt]# ls -lZ | grep swtpm
drwx--x--x. 7 root root unconfined_u:object_r:virt_var_lib_t:s0 4096 Apr 5 16:22 swtpm
The directory /var/lib/libvirt/swtpm maintains per-TPM state directories.
(Using the uuid of the VM for that since the name can change per VM renaming but
we need a stable directory name.)
[root@localhost swtpm]# ls -lZ
total 4
drwx------. 2 tss tss system_u:object_r:virt_var_lib_t:s0 4096 Apr 5 16:46 485d0004-a48f-436a-8457-8a3b73e28568
[root@localhost 485d0004-a48f-436a-8457-8a3b73e28568]# ls -lZ
total 4
drwx------. 2 tss tss system_u:object_r:virt_var_lib_t:s0 4096 Apr 10 21:34 tpm1.2
[root@localhost tpm1.2]# ls -lZ
total 8
-rw-r--r--. 1 tss tss system_u:object_r:virt_var_lib_t:s0 3648 Apr 5 16:46 tpm-00.permall
The directory /var/run/libvirt/qemu/swtpm/ hosts the swtpm.sock that
QEMU uses to communicate with the swtpm:
root@localhost domain-1-testvm]# ls -lZ
total 0
srw-------. 1 qemu qemu system_u:object_r:svirt_image_t:s0:c597,c632 0 Apr 6 10:24 1-testvm-swtpm.sock
The logfile for the swtpm is in /var/log/swtpm/libvirt/qemu:
[root@localhost-3 qemu]# ls -lZ
total 4
-rw-------. 1 tss tss unconfined_u:object_r:var_log_t:s0 2199 Apr 6 14:01 testvm-swtpm.log
The processes are labeled as follows:
[root@localhost 485d0004-a48f-436a-8457-8a3b73e28567]# ps auxZ | grep swtpm | grep socket | grep -v grep
system_u:system_r:virtd_t:s0-s0:c0.c1023 tss 18697 0.0 0.0 28172 3892 ? Ss 16:46 0:00 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/1-testvm-swtpm.sock,mode=0600 --tpmstate dir=/var/lib/libvirt/swtpm/485d0004-a48f-436a-8457-8a3b73e28568/tpm1.2 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log
[root@localhost 485d0004-a48f-436a-8457-8a3b73e28567]# ps auxZ | grep qemu | grep tpm | grep -v grep
system_u:system_r:svirt_t:s0:c413,c430 qemu 18702 2.5 0.0 3036052 48676 ? Sl 16:46 0:08 /bin/qemu-system-x86_64 [...]
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator'/>
</tpm>
The XML will currently only define a TPM 1.2.
Extend the documentation.
Add a test case testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of array of pointers to individual buffers it can be
array of buffers directly. This also fixes the following memleak:
==22516== 96 bytes in 4 blocks are definitely lost in loss record 166 of 195
==22516== at 0x4C2EF26: calloc (vg_replace_malloc.c:711)
==22516== by 0x5D2C7D5: virAlloc (viralloc.c:144)
==22516== by 0x56FAABD: qemuBuildNumaArgStr (qemu_command.c:7543)
==22516== by 0x5701835: qemuBuildCommandLine (qemu_command.c:10112)
==22516== by 0x575D794: qemuProcessCreatePretendCmd (qemu_process.c:6568)
==22516== by 0x113338: testCompareXMLToArgv (qemuxml2argvtest.c:549)
==22516== by 0x138CA3: virTestRun (testutils.c:180)
==22516== by 0x136CD1: mymain (qemuxml2argvtest.c:2825)
==22516== by 0x13AD58: virTestMain (testutils.c:1118)
==22516== by 0x137351: main (qemuxml2argvtest.c:2874)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is a race condition when spawning QEMU where libvirt has spawned
QEMU but the monitor socket is not yet open. Libvirt has to repeatedly
try to connect() to QEMU's monitor until eventually it succeeds, or
times out. We use kill() to check if QEMU is still alive so we avoid
waiting a long time if QEMU exited, but having a timeout at all is still
unpleasant.
With QEMU 2.12 we can pass in a pre-opened FD for UNIX domain or TCP
sockets. If libvirt has called bind() and listen() on this FD, then we
have a guarantee that libvirt can immediately call connect() and
succeed without any race.
Although we only really care about this for the monitor socket and agent
socket, this patch does FD passing for all UNIX socket based character
devices since there appears to be no downside to it.
We don't do FD passing for TCP sockets, however, because it is only
possible to pass a single FD, while some hostnames may require listening
on multiple FDs to cover IPv4 and IPv6 concurrently.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
