Commit Graph

18 Commits

Author SHA1 Message Date
Daniel P. Berrangé
e88367095f qemu: populate <audio> element with default config
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable

 - VNC - set to "none", unless passthrough of host env variable is set
 - SPICE - always set to "spice"
 - SDL - always passthrough host env
 - No graphics - set to "none", unless passthrough of host env variable is set

The setting of the QEMU_AUDIO_DRV env variable is done in the code which
configures graphics.

If no <audio> element is present, we now auto-populate <audio> elements
to reflect this historical default config. This avoids need to set audio
env when processing graphics.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-09 22:58:30 +00:00
Peter Krempa
947d2db31b Use virHashForEachSorted in tested code
The simplest way to write tests is to check the output against expected
output, but we must ensure that the output is stable. We can use
virHashForEachSorted as a hash iterator to ensure stable ordering.

This patch fixes 3 instances of hash iteration which is tested in
various parts, including test output changes in appropriate places.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
2020-11-06 10:31:57 +01:00
Peter Krempa
aa99658b06 qemuDomainObjPrivateAlloc: Use virHashNew instead of virHashCreate
virHashCreate will be removed in upcoming patches. This change has an
impact on ordering of the blockjob entries in one of the status XML->XML
tests.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2020-10-22 15:02:46 +02:00
Peter Krempa
057e4bc591 qemu: blockjob: Remove 'disabledBitmapsBase' field from commit job private data
New semantics of the bitmap handling don't need this. Remove the field
and all uses of it including the status XML.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-06-22 16:04:31 +02:00
Peter Krempa
41de7230ab qemu: blockjob: Store list of bitmaps disabled prior to commit
Starting a commit job will require disabling bitmaps in the base image
so that they are not dirtied by the commit job. We need to store a list
of the bitmaps so that we can later re-enable them.

Add a field and status XML handling code as well as a test.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-03-16 17:33:08 +01:00
Peter Krempa
9ba804a1d1 qemu: blockjob: Store 'jobflags' with block job data
Add a variable which will store the contents of the 'flags' variable as
passed in by the individual block jobs. Since the flags may influence
behaviour of the jobs it's important to preserve them to the
finalization steps.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-02-04 13:45:33 +01:00
Pavel Mores
73532dadd2 qemu: block: store the delete flag in libvirtd's status XML
Since blockcommit is asynchronous, libvirtd can be restarted while the
operation runs.  To ensure the information necessary to finish up the job
is not lost, serialisation to and deserialisation from the status XML is
added.

To unittest this, the new element was only added to the active commit test,
the non-active commit test doesn't have the new element so as to test its
absence.

Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2019-12-11 08:40:18 +01:00
Peter Krempa
e67e8c545a qemu: blockjob: Introduce "broken" block job type
To better track jobs we couldn't parse let's introduce a new job type
which will clarify semantics internally in few places.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-11-27 15:59:33 +01:00
Jonathon Jongsma
95f5ac9ae5 Add API to change qemu agent response timeout
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.

This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.

One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').

Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds,  this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-11-14 19:10:01 +01:00
Peter Krempa
8b2798e395 tests: qemustatusxml2xml: Fix disk target mess
There were accidentally two disks with 'vdc' target with corresponding
blockjobs which made libvirt leak some references as there are not
supposed to be two blockjobs for a single disk. Fix this mess by
renaming some of the disks.

In addition the block job names also didn't correspond to the naming
convetion which also includes the disk target. Fix it as well.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-09-16 11:50:28 +02:00
Peter Krempa
ce7229a3b0 qemu: Add blockdev support for the block copy job
Implement job handling for the block copy job (drive/blockdev-mirror)
when using -blockdev. In contrast to the previously implemented
blockjobs the block copy job introduces new images to the running qemu
instance, thus requires a bit more handling.

When copying to new images the code now makes use of blockdev-create to
format the images explicitly rather than depending on automagic qemu
behaviour.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-08-16 13:26:10 +02:00
Peter Krempa
545edb2502 qemu: Introduce code for blockdev-create
QEMU finally exposes an interface which allows us to instruct it to
format or create arbitrary images. This is required for blockdev
integration of block copy and snapshots as we need to pre-format images
prior to use with blockdev-add.

This path introduces job handling and also helpers for formatting and
attaching a whole image described by a virStorageSource.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-08-16 13:26:10 +02:00
Peter Krempa
3f93884a4d qemu: Add -blockdev support for block commit job
Introduce the handler for finalizing a block commit and active bloc
commit job which will allow to use it with blockdev.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-29 13:58:26 +02:00
Peter Krempa
1bf3808207 qemu: Add -blockdev support for block pull job
Introduce the handler for finalizing a block pull job which will allow
to use it with blockdev.

This patch also contains some additional machinery which is required to
store all the relevant job data in the status XML which will also be
reused with other block job types.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-29 13:58:25 +02:00
Peter Krempa
dae7d01322 qemu: blockjob: Register disk->mirror with a job only when required
The <mirror> subelement is used in two ways: in a commit job to point to
existing storage, and in a block-copy job to point to additional
storage. We need a way to track only the distinct storage.

This patch introduces qemuBlockJobDiskRegisterMirror which registers the
mirror chain separately only for jobs which require it. This also comes
with remembering that in the status XML.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
2019-07-25 13:21:33 +02:00
Peter Krempa
602fa254a9 tests: qemustatusxml: Add few disks with backing chains for blockdev job testing
Add 4 disks to the blockjob-blockdev-in.xml test case to allow adding
data for block pull, block copy, block commit, and active block commit
jobs.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
2019-07-25 13:21:33 +02:00
Peter Krempa
b3f8ad07dd qemu: blockjob: Track orphaned backing chains in blockjob status XML
When the guest unplugs the disk frontend libvirt is responsible for
deleting the backend. Since a blockjob may still have a reference to the
backing chain when it is running we'll have to store the metadata for
the unplugged disk for future reference.

This patch adds 'chain' and 'mirrorChain' fields to 'qemuBlockJobData'
to keep them around with the job along with status XML machinery and
tests. Later patches will then add code to change the ownership of the
chain when unplugging the disk backend.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
2d36c5866e tests: qemustatusxml2xml: Add test case for block job tracking
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00