Commit Graph

26 Commits

Author SHA1 Message Date
Pavel Hrdina
e6e26a899d tests: unify qemu binary paths for all qemu related tests
Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.

Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-11 14:06:47 +02:00
Peter Krempa
e114b09157 qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY
Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50
prior to 0.12.0, our minimum supported qemu version.

$ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62
v0.11.0-rc0-449-gdc6b1c0
$ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab
v0.12.0-rc0~1477
2016-07-07 15:08:35 +02:00
Martin Kletzander
a89f05ba8d qemu: Shorten per-domain directory names
Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca334).  However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited.  In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains).  That way we can change it
in the future.

The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-03-01 07:15:29 +01:00
Michal Privoznik
d7db33bfe9 qemu: Specify format= iff disk source is not empty
Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:

    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <target dev='hda' bus='ide'/>
      <readonly/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>

and obviously I am unable to start it. Therefore, a fix on our
side is needed too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-05 16:41:16 +01:00
Daniel P. Berrange
f81e0d480e qemu: assume -drive format is always available
As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:17 +00:00
Daniel P. Berrange
dc7f6c3d30 qemu: assume -uuid is always available
The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can
assume it is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:02 +00:00
Daniel P. Berrange
4588c2ce97 qemu: assume -name is always available
The -name arg was added in QEMU 0.9.1, so the QEMU driver can
assume it is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:02 +00:00
Daniel P. Berrange
f78610038d qemu: assume -drive argument is always available
As of QEMU 0.9.1 the -drive argument can be used to configure
all disks, so the QEMU driver can assume it is always available
and drop support for -hda/-cdrom/etc.

Many of the tests need updating because a great many were
running without CAPS_DRIVE set, so using the -hda legacy
syntax.

Fixing the tests uncovered a bug in the argv -> xml
convertor which failed to handle disk with if=floppy.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:01 +00:00
Daniel P. Berrange
8afd34f2d8 tests: redo test argv file line wrapping
Back in

  commit bd6c46fa0c
  Author: Juerg Haefliger <juerg.haefliger@hp.com>
  Date:   Mon Jan 31 06:42:57 2011 -0500

    tests: handle backspace-newline pairs in test input files

all the test argv files were line wrapped so that the args
were less than 80 characters.

The way the line wrapping was done turns out to be quite
undesirable, because it often leaves multiple parameters
on the same line. If we later need to add or remove
individual parameters, then it leaves us having to redo
line wrapping.

This commit changes the line wrapping so that every
single "-param value" is one its own new line. If the
"value" is still too long, then we break on ',' or ':'
or ' ' as needed.

This means that when we come to add / remove parameters
from the test files line, the patch diffs will only
ever show a single line added/removed which will greatly
simplify review work.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-09 15:50:39 +00:00
Pavel Hrdina
c32cfc6d3f QXL: fix setting ram and vram values for QEMU QXL device
QEMU has two different type of QXL display device. The first "qxl-vga"
is for primary video device and second "qxl" is for secondary video
device.

There are also two different ways how to specify those devices on qemu
command line, the first one and obsolete is using "-vga" option and the
current new one is using "-device" option. The "-vga" could be used only
to setup primary video device, so the "-vga qxl" equal to
"-device qxl-vga". Unfortunately the "-vga qxl" doesn't support setting
additional parameters for the device and "-global" option must be used
for this purpose. It's mandatory to use "-global qxl-vga...." to set the
parameters of primary video device previously defined with "-vga qxl".

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2014-11-24 22:05:56 +01:00
Pavel Hrdina
81ba2298b2 video: cleanup usage of vram attribute and update documentation
The vram attribute was introduced to set the video memory but it is
usable only for few hypervisors excluding QEMU/KVM and the old XEN
driver. Only in case of QEMU the vram was used for QXL.

This patch updates the documentation to reflect current code in libvirt
and also changes the cases when we will set the default vram attribute.
It also fixes existing strange default value for VGA devices 9MB to 16MB
because the video ram should be rounded to power of two.

The change of default value could affect migrations but I found out that
QEMU always round the video ram to power of two internally so it's safe
to change the default value to the next closest power of two and also
silently correct every domain XML definition. And it's also safe because
we don't pass the value to QEMU.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2014-11-24 22:05:55 +01:00
Francesco Romani
08d07e5fd8 spice: expose the QEMU disable file transfer option
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.

This patch exposes this option to libvirt.
Adds a new element 'filetransfer', with one property,
'enable', which accepts a boolean.
Default is enabled, for backward compatibility.

Depends on the capability exported in the first patch of the series.

Signed-off-by: Francesco Romani <fromani@redhat.com>
2014-01-21 11:35:41 +01:00
Eric Blake
684c90bfbc tests: split long lines
Long lines are harder to read and harder to diff; in fact, if lines get
too long (> 1000 bytes), it starts causing issues where git send-email
refuses to send patches for the file.  I've cleaned up the tests
directory in the past (see commits bd6c46f, 3b750d1), but new long
lines have been introduced in the meantime.

Why 90 instead of 80? Because there were too many tests on the fringe
edge, and I didn't want to edit that many files.

Add a syntax check to prevent future long lines.

* cfg.mk (sc_prohibit_long_lines): New rule.
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Split lines of any
file with content longer than 90 columns.
* tests/storagevolxml2argvdata/*.argv: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-07-18 10:08:04 -06:00
Alon Levy
55bfd020d8 qemu: Support ram bar size for qxl devices
Adds a "ram" attribute globally to the video.model element, that changes
the resulting qemu command line only if video.type == "qxl".

<video>
  <model type='qxl' ram='65536' vram='65536' heads='1'/>
</video>

That attribute gets a default value of 64*1024. The schema is unchanged
for other video element types.

The resulting qemu command line change is the addition of

-global qxl-vga.ram_size=<ram>*1024

or

-global qxl.ram_size=<ram>*1024

For the main and secondary qxl devices respectively.

The default for the qxl ram bar is 64*1024 kilobytes (the same as the
default qxl vram bar size).
2013-01-22 10:40:45 -07:00
Vladislav Bogdanov
81af5336ac qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
Alon Levy
ba97e4edc6 domain_conf: add "default" to list of valid spice channels
qemu's behavior in this case is to change the spice server behavior to
require secure connection to any channel not otherwise specified as
being in plaintext mode. libvirt doesn't currently allow requesting this
(via plaintext-channel=<channel name>).

RHBZ: 819499

Signed-off-by: Alon Levy <alevy@redhat.com>
2012-05-08 12:14:45 -06:00
Marc-André Lureau
98bfdff12c spice: add <clipboard copypaste='yes|no'> option
From a security pov copy and paste between the guest and the client is not
always desirable. So we need to be able to enable/disable this. The best place
to do this from an administration pov is on the hypervisor, so the qemu cmdline
is getting a spice disable-copy-paste option, see bug 693645. Example qemu
invocation:
qemu -spice port=5932,disable-ticketing,disable-copy-paste

https://bugzilla.redhat.com/show_bug.cgi?id=693661
2011-06-14 17:03:26 -06:00
Alon Levy
bb1c5423b9 spice: support streaming-video parameter
This adds a streaming-video=filter|all|off attribute. It is used to change
the behavior of video stream detection in spice, the default is filter (the
default for libvirt is not to specify it - the actual default is defined in
libspice-server.so).

Usage:

    <graphics type='spice' autoport='yes'>
      <streaming mode='off'/>
    </graphics>

Tested with the above and with tests/qemuxml2argvtest.

Signed-off-by: Alon Levy <alevy@redhat.com>
2011-05-23 20:53:59 -06:00
Michal Privoznik
abb1570eac Spice: support audio, images and stream compression
This extends the SPICE XML to allow variable compression settings for audio,
images and streaming:
    <graphics type='spice' port='5901' tlsPort='-1' autoport='yes'>
        <image compression='auto_glz'/>
        <jpeg compression='auto'/>
        <zlib compression='auto'/>
        <playback compression='on'/>
    </graphics>

All new elements are optional.
2011-04-14 10:23:59 -06:00
Osier Yang
82dfc6f38e qemu: Support vram for video of qxl type
For qemu names the primary vga as "qxl-vga":

  1) if vram is specified for 2nd qxl device:

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,vram_size=$SIZE,...

  2) if vram is not specified for 2nd qxl device, (use the default
     set by global):

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,...

For qemu names all qxl devices as "qxl":

  1) if vram is specified for 2nd qxl device:

    -vga qxl -global qxl.vram_size=$SIZE \
    -device qxl,id=video1,vram_size=$SIZE ...

  2) if vram is not specified for 2nd qxl device:

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,...

"-global" is the only way to define vram_size for the primary qxl
device, regardless of how qemu names it, (It's not good a good
way, as original idea of "-global" is to set a global default for
a driver property, but to specify vram for first qxl device, we
have to use it).

For other qxl devices, as they are represented by "-device", could
specify it directly and seperately for each, and it overrides the
default set by "-global" if specified.

v1 - v2:
  * modify "virDomainVideoDefaultRAM" so that it returns 16M as the
    default vram_size for qxl device.

  * vram_size * 1024 (qemu accepts bytes for vram_size).

  * apply default vram_size for qxl device for which vram_size is
    not specified.

  * modify "graphics-spice" tests (more sensiable vram_size)

  * Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr,
    to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr).

v2 - v3:
  * Modify default video memory size for qxl device from 16M to 24M

  * Update codes to be consistent with changes on qemu_capabilities.*
2011-03-06 22:00:27 +08:00
Juerg Haefliger
bd6c46fa0c tests: handle backspace-newline pairs in test input files
This patch teaches testutil how to read multi-line input files with
backspace-newline line continuation markers.

The patch also breaks up all the single-line arguments test input files into
multi-line files with lines shorter than 80 characters.
2011-01-31 11:25:34 -07:00
Daniel P. Berrange
b0ef5c5367 Support SPICE channel security options
This extends the SPICE XML to allow channel security options

    <graphics type='spice' port='-1' tlsPort='-1' autoport='yes'>
      <channel name='main' mode='secure'/>
      <channel name='record' mode='insecure'/>
    </graphics>

Any non-specified channel uses the default, which allows both
secure & insecure usage

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/libvirt_private.syms: Add XML syntax for specifying per
  channel security options for spice.
* src/qemu/qemu_conf.c: Configure channel security with spice
2010-11-09 11:47:26 +00:00
Daniel P. Berrange
6794a44b85 Support multiple QXL video cards
QEMU crashes & burns if you try multiple Cirrus video cards, but
QXL copes fine. Adapt QEMU config code to allow multiple QXL
video cards

* src/qemu/qemu_conf.c: Support multiple QXL video cards
2010-11-09 11:47:21 +00:00
Daniel P. Berrange
b5c9920955 Add SPICE support for QEMU driver configuration file
In common with VNC, the QEMU driver configuration file is used
specify the host level TLS certificate location and a default
password / listen address

* src/qemu/qemu.conf: Add spice_listen, spice_tls,
  spice_tls_x509_cert_dir & spice_password config params
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Parsing of
  spice config parameters and updating -spice arg generation
  to use them
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-rhel6.args,
  tests/qemuxml2argvtest.c: Expand test case to cover driver
  level configuration
2010-11-09 11:47:05 +00:00
Daniel P. Berrange
9b57fa65bd Implement QEMU/KVM support for SPICE graphics
This supports the -spice argument posted for review against
the latest upstream QEMU/KVM. This supports the bare minimum
config with port, TLS port & listen address. The x509 bits are
added in a later patch.

* src/qemu_conf.c, src/qemu_conf.h: Add SPICE flag. Check for
  -spice availability. Format -spice arg for command line
* qemuhelptest.c: Add SPICE flag
* qemuxml2argvdata/qemuxml2argv-graphics-spice.args: Add <graphics>
  for spice
* qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add -spice arg
* qemuxml2argvtest.c: Add SPICE flag
2010-11-09 11:46:50 +00:00
Daniel P. Berrange
635f9ca1f3 Implement QEMU/KVM QXL video card support in QEMU driver
This supports the '-vga qxl' parameter in upstream QEMU/KVM
which has SPICE support added. This isn't particularly useful
until you get the next patch for -spice support. Also note that
while the libvirt XML supports multiple video devices, this
patch only supports a single one. A later patch can add support
for 2nd, 3rd, etc PCI devices for QXL

* src/qemu/qemu_conf.h: Flag for QXL support
* src/qemu/qemu_conf.c: Probe for '-vga qxl' support and implement it
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c,
  tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args,
  tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Test
  case for generating spice args with RHEL6 kvm
2010-11-09 11:46:45 +00:00