Recently, I wanted to attach an vhost-user interface but found
out that attach-interface command doesn't support it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Note that it's for internal testing use and remove the manpage entry.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need to error out for empty <partition></partition> element
as we can just simply ignore it. This allows to simplify the function
and prepare it for new sub-elements of <resource>.
It makes the <partition> element optional so we need to reflect the
change in schema as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is the preferred way to do it, but there were a few
instances in which some of the path components had embedded
slashes instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 12967c3e13 incorrectly made the target optional.
The validation was re-introduced by commit e8863b91f (which
put it into FSDefValidate instead of the parser), but
it did not amend the schema to make it mandatory again.
https://bugzilla.redhat.com/show_bug.cgi?id=1969232
Fixes: e8863b91fb
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This function add halt polling time interface in domstats. So that
we can use command 'virsh domstats VM' to get the data if system
support.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support for customizable grabToggle key combinations with
<input type='evdev'>.
Signed-off-by: Justin Gatzen <justin.gatzen@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Adding availability of s390-pv in domain capabilities and adjust tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add documentation for launch security type s390-pv.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add launch security type 's390-pv' as well as some tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Change launch security to make it reusable for other types.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Even though 'id' attribute is output-only, we should accept xml
files containing it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1941594
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Enabling core dumps is a reasonably straightforward task, but is not
documented clearly. This page provides as easy link to point users
to when they need to debug QEMU.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need to report via domcapabilities if specifying shared memory
is supported without hugepages or numa config in order to find
out if domain has suitable setup to make virtiofs work.
The solution is to report source types of memory backing to
determine if memfd is a valid option.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Turns out, when introducing HMAT support in v6.6.0-rc1~249
I've forgot to allow "cache" attribute for <bandwidth/> element
in RNG. It's parsed and formatted, but schema does not allow it.
Fixes: a89bbbac86
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1980162
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The gitlab.com repos are the primary source, with libvirt.org just a
read-only mirror.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current information is not accurate, because the default
is 2.0 instead of 1.2 for the tpm-crb and tpm-spapr models.
Any detailed list will surely become obsolete and out of sync
with reality over time, so let's just document that the default
model depends on a number of factors and avoid getting any more
specific than that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When adding support for externally launched virtiofsd,
I was too liberal and did not require a target.
But the target is required, because it's passed to the
QEMU device, not to virtiofsd.
https://bugzilla.redhat.com/show_bug.cgi?id=1969232
Fixes: 12967c3e13
Fixes: 56dcdec1ac
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
I expect to find a link to the repositories when clicking on
"Contribute", this patch fixes this. The wording is directly inspired by
the one on the hacking page.
Signed-off-by: Simon Chopin <chopin.simon@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Links between NUMA nodes can have different latencies and
bandwidths. This info is newly defined in ACPI 6.2 under
Heterogeneous Memory Attribute Table (HMAT) table. Linux kernel
learned how to report these values under sysfs and thus we can
expose them in our capabilities XML. The sysfs interface is
documented in kernel's Documentation/admin-guide/mm/numaperf.rst.
Long story short, two nodes can be in initiator-target
relationship. A node can be initiator if it has a CPU or a device
that's capable of initiating memory transfer. Therefore a node
that has just memory can only be target. An initiator-target link
can then have any combination of {bandwidth, latency} - {access,
read, write} attribute (6 in total). However, the standard says
access is applicable iff read and write values are the same.
Therefore, we really have just four combinations of attributes:
bandwidth-read, bandwidth-write, latency-read, latency-write.
This is the combination that kernel reports anyway.
Then, under /sys/system/devices/node/nodeX/acccessN/initiators we
find values for those 4 attributes and also symlinks named
"nodeN" which then represent initiators to nodeX. For instance:
/sys/system/node/node1/access1/initiators/node0 -> ../../node0
/sys/system/node/node1/access1/initiators/read_bandwidth
/sys/system/node/node1/access1/initiators/read_latency
/sys/system/node/node1/access1/initiators/write_bandwidth
/sys/system/node/node1/access1/initiators/write_latency
This means that node0 is initiator and node1 is target and values
of the interconnect can be read.
In theory, there can be separate links to memory side caches too
(e.g. one link from node X to node Y's main memory, another from
node X to node Y's L1 cache, another one to L2 cache and so on).
But sysfs does not express this relationship just yet.
The "accessN" means either "access0" or "access1". The difference
is that while the former expresses the best interconnect between
two nodes including CPUS and I/O devices (such as GPUs and NICs),
the latter includes only CPUs and thus is what we need.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1786309
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Memory on a NUMA node can have a side caches. Configuring these
for a domain was implemented in v6.6.0-rc1~249 and friends.
However, up until now mgmt applications did not really know what
values to pass because we were not exposing caches of the host.
With recent enough kernel these are exposed under sysfs and with
a bit of parsing we can extend our capabilities XML. The sysfs
structure is documented in kernel's
Documentation/admin-guide/mm/numaperf.rst and basically maps in
1:1 fashion to our virNumaCache structure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It may happen that a NUMA node has no CPUs associated with it. We
allow this for domains since v6.6.0-rc1~250. Let's update our
capabilities schema to match that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently we expose libvirt Go packages at
libvirt.org/libvirt-go
libvirt.org/libvirt-go-xml
These packages have not supported Go modules historically and when we
tried to introduce modules, we hit the problem that we're not using
semver for versioning.
The only way around this is to introduce new packages under a different
namespace, that will have the exact same code, but be tagged with a
different version numbering scheme.
This change proposes:
libvirt.org/go/libvirt
libvirt.org/go/libvirtxml
Note the hyphen is removed so that the import basename matches the
Go package name.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Disk serials are truncated arbitrarily and silently by qemu depending on
the device type and how they are configured. Since changing the current
state would lead to more regressions than we have now, document that the
truncation is arbitrary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Nowadays memfd is the most convenient memory backend for vhost-user
devices. Compared to file-backend memory and hugepages, there is no need
to worry about configuring the location of the shm directory or
allocating hugepages.
Cc: Michal Prívozník <mprivozn@redhat.com>
Cc: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove some dupicate text and replace in incorrect occurance of
monolithic with modular.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The <audio> element is configuring exclusively a backend, not a device.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
We supported autostart of node devices via an xml element, but this
is not consistent with other libvirt objects which use an explicit API
for setting autostart status. So revert this and implement it as an
official API in a future commit.
The initial support was refactored after merging, so this commit reverts
both of those previous commits.
Revert "virNodeDevCapMdevParseXML: Use virXMLPropEnum() for ./start/@type"
This reverts commit 9d4cd1d1cd.
Revert "nodedev: support auto-start property for mdevs"
This reverts commit 42a5585499.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case the user wants to share the disk image between multiple VMs the
qemu driver needs to hotplug such disks to instantiate the backends.
Since that doesn't work for all disk configs add a switch to force this
behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Using slice to cut off the end of the image is a perfectly vaid
configuration. Use 'unsignedInt' instead of 'positiveInteger' for the
'offset' attribute in the XML schema and modify one test case to cover
this use case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1960993
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
After previous patches we have two structures:
virCapsHostNUMACellDistance and virNumaDistance which express the
same thing. And have the exact same members (modulo their names).
Drop the former in favor of the latter.
This change means that distances with value of 0 are no longer
printed out into capabilities XML, because domain XML code allows
partial distance specification and thus threats value of 0 as
unspecified by user (see virDomainNumaGetNodeDistance() which
returns the default LOCAL/REMOTE distance for value of 0).
Also, from ACPI 6.1 specification, section 5.2.17 System Locality
Distance Information Table (SLIT):
Distance values of 0-9 are reserved and have no meaning.
Thus we shouldn't be ever reporting 0 in neither domain nor
capabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The default value hard-coded in QEMU (64KiB) is not always the ideal.
Having a possibility to set the cluster_size by user may in specific
use-cases improve performance for QCOW2 images.
QEMU internally has some limits, the value has to be between 512B and
2048KiB and must by power of two, except when the image has Extended L2
Entries the minimal value has to be 16KiB.
Since qemu-img ensures the value is correct and the limit is not always
the same libvirt will not duplicate any of these checks as the error
message from qemu-img is good enough:
Cluster size must be a power of two between 512 and 2048k
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/154
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
