The qemu monitor supports retrieval of actual CPUID bits presented to
the guest using QMP monitor. Add APIs to extract these information and
tests for them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since 86d90b3a (yes, my patch; again) we are supporting NBD storage
migration. However, on error recovery path we got the steps reversed.
The correct order is: return NBD port to the virPortAllocator and then
either unlock the vm or remove it from the driver. Not vice versa.
==11192== Invalid write of size 4
==11192== at 0x11488559: qemuMigrationPrepareAny (qemu_migration.c:2459)
==11192== by 0x11488EA6: qemuMigrationPrepareDirect (qemu_migration.c:2652)
==11192== by 0x114D1509: qemuDomainMigratePrepare3Params (qemu_driver.c:10332)
==11192== by 0x519075D: virDomainMigratePrepare3Params (libvirt.c:7290)
==11192== by 0x1502DA: remoteDispatchDomainMigratePrepare3Params (remote.c:4798)
==11192== by 0x12DECA: remoteDispatchDomainMigratePrepare3ParamsHelper (remote_dispatch.h:5741)
==11192== by 0x5212127: virNetServerProgramDispatchCall (virnetserverprogram.c:435)
==11192== by 0x5211C86: virNetServerProgramDispatch (virnetserverprogram.c:305)
==11192== by 0x520A8FD: virNetServerProcessMsg (virnetserver.c:165)
==11192== by 0x520A9E1: virNetServerHandleJob (virnetserver.c:186)
==11192== by 0x50DA78F: virThreadPoolWorker (virthreadpool.c:144)
==11192== by 0x50DA11C: virThreadHelper (virthreadpthread.c:161)
==11192== Address 0x1368baa0 is 576 bytes inside a block of size 688 free'd
==11192== at 0x4A07F5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==11192== by 0x5079A2F: virFree (viralloc.c:580)
==11192== by 0x11456C34: qemuDomainObjPrivateFree (qemu_domain.c:267)
==11192== by 0x50F41B4: virDomainObjDispose (domain_conf.c:2034)
==11192== by 0x50C2991: virObjectUnref (virobject.c:262)
==11192== by 0x50F4CFC: virDomainObjListRemove (domain_conf.c:2361)
==11192== by 0x1145C125: qemuDomainRemoveInactive (qemu_domain.c:2087)
==11192== by 0x11488520: qemuMigrationPrepareAny (qemu_migration.c:2456)
==11192== by 0x11488EA6: qemuMigrationPrepareDirect (qemu_migration.c:2652)
==11192== by 0x114D1509: qemuDomainMigratePrepare3Params (qemu_driver.c:10332)
==11192== by 0x519075D: virDomainMigratePrepare3Params (libvirt.c:7290)
==11192== by 0x1502DA: remoteDispatchDomainMigratePrepare3Params (remote.c:4798)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
One of my previous patches (c7ac2519b7f) did try to fix the issue when
domain dies too soon during migration. However, this clumsy approach was
missing removal of qemuProcessHandleMonitorDestroy resulting in double
unrefing of mon->vm and hence producing the daemon crash:
==11843== Invalid read of size 4
==11843== at 0x50C28C5: virObjectUnref (virobject.c:255)
==11843== by 0x1148F7DB: qemuMonitorDispose (qemu_monitor.c:258)
==11843== by 0x50C2991: virObjectUnref (virobject.c:262)
==11843== by 0x50C2D13: virObjectFreeCallback (virobject.c:388)
==11843== by 0x509C37B: virEventPollCleanupHandles (vireventpoll.c:583)
==11843== by 0x509C711: virEventPollRunOnce (vireventpoll.c:652)
==11843== by 0x509A620: virEventRunDefaultImpl (virevent.c:274)
==11843== by 0x520D21C: virNetServerRun (virnetserver.c:1112)
==11843== by 0x11F368: main (libvirtd.c:1513)
==11843== Address 0x13b88864 is 4 bytes inside a block of size 136 free'd
==11843== at 0x4A07F5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==11843== by 0x5079A2F: virFree (viralloc.c:580)
==11843== by 0x50C29E3: virObjectUnref (virobject.c:270)
==11843== by 0x114770E4: qemuProcessHandleMonitorDestroy (qemu_process.c:1103)
==11843== by 0x1148F7CB: qemuMonitorDispose (qemu_monitor.c:257)
==11843== by 0x50C2991: virObjectUnref (virobject.c:262)
==11843== by 0x50C2D13: virObjectFreeCallback (virobject.c:388)
==11843== by 0x509C37B: virEventPollCleanupHandles (vireventpoll.c:583)
==11843== by 0x509C711: virEventPollRunOnce (vireventpoll.c:652)
==11843== by 0x509A620: virEventRunDefaultImpl (virevent.c:274)
==11843== by 0x520D21C: virNetServerRun (virnetserver.c:1112)
==11843== by 0x11F368: main (libvirtd.c:1513)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far we are checking if qemu supports 'nbd-server-start'. This,
however, makes no sense on the source as nbd-server-* is used on the
destination. On the source the 'drive-mirror' is used instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the 90139a62 commit the error is copied into mon->lastError but
it's never freed from there.
==31989== 395 bytes in 1 blocks are definitely lost in loss record 877 of 978
==31989== at 0x4A06C2B: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==31989== by 0x7EAF129: strdup (in /lib64/libc-2.15.so)
==31989== by 0x50D586C: virStrdup (virstring.c:554)
==31989== by 0x50976C1: virCopyError (virerror.c:191)
==31989== by 0x5097A35: virCopyLastError (virerror.c:312)
==31989== by 0x114909A9: qemuMonitorIO (qemu_monitor.c:690)
==31989== by 0x509BEDE: virEventPollDispatchHandles (vireventpoll.c:501)
==31989== by 0x509C701: virEventPollRunOnce (vireventpoll.c:648)
==31989== by 0x509A620: virEventRunDefaultImpl (virevent.c:274)
==31989== by 0x520D21C: virNetServerRun (virnetserver.c:1112)
==31989== by 0x11F368: main (libvirtd.c:1513)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there's a migration cancelled, the bitmap of migration port should be
cleaned up too.
Signed-off-by: Zeng Junliang <zengjunliang@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Coverity complains that the call to virPCIDeviceDetach() in
qemuPrepareHostdevPCIDevices() doesn't check status return like
other calls. Seems this just was lurking until a recent change
to this module resulted in Coverity looking harder and finding
the issue. Introduced by 'a4efb2e33' when function was called
'pciReAttachDevice()'
Just added a ignore_value() since it doesn't appear to matter
if the call fails since we're on a failure path already.
Include reference of the VM object pointer and name in debug
logs for QEMU start/stop functions. Also make sure we log the
PID that we started, since it isn't available elsewhere in the
logs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In debugging a recent oVirt/libvirt race condition, I was very
frustrated by lack of logging in the job enter/exit code. This
patch adds some key data which would have been useful in by
debugging attempts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The following sequence
1. Define a persistent QMEU guest
2. Start the QEMU guest
3. Stop libvirtd
4. Kill the QEMU process
5. Start libvirtd
6. List persistent guests
At the last step, the previously running persistent guest
will be missing. This is because of a race condition in the
QEMU driver startup code. It does
1. Load all VM state files
2. Spawn thread to reconnect to each VM
3. Load all VM config files
Only at the end of step 3, does the 'virDomainObjPtr' get
marked as "persistent". There is therefore a window where
the thread reconnecting to the VM will remove the persistent
VM from the list.
The easy fix is to simply switch the order of steps 2 & 3.
In addition to this though, we must only attempt to reconnect
to a VM which had a non-zero PID loaded from its state file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'error' cleanup block in qemuProcessReconnect() had a
'return' statement in the middle of it. This caused a leak
of virConnectPtr & virQEMUDriverConfigPtr instances. This
was identified because netcf recently started checking its
refcount in libvirtd shutdown:
netcfStateCleanup:109 : internal error: Attempt to close netcf state driver with open connections
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When adding an automatically allocated port to a well-formed migration
URI, keep it well-formed:
tcp://1.2.3.4/ -> tcp://1.2.3.4/:12345 # wrong
tcp://1.2.3.4/ -> tcp://1.2.3.4:12345/ # fixed
tcp://1.2.3.4 -> tcp://1.2.3.4:12345 # still works
tcp:1.2.3.4 -> tcp:1.2.3.4:12345 # still works (old syntax)
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Expand the "secmodel" XML fragment of "host" with a sequence of
baselabel's which describe the default security context used by
libvirt with a specific security model and virtualization type:
<secmodel>
<model>selinux</model>
<doi>0</doi>
<baselabel type='kvm'>system_u:system_r:svirt_t:s0</baselabel>
<baselabel type='qemu'>system_u:system_r:svirt_tcg_t:s0</baselabel>
</secmodel>
<secmodel>
<model>dac</model>
<doi>0</doi>
<baselabel type='kvm'>107:107</baselabel>
<baselabel type='qemu'>107:107</baselabel>
</secmodel>
"baselabel" is driver-specific information, e.g. in the DAC security
model, it indicates USER_ID:GROUP_ID.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch (and the two patches that precede it) resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=1005682
When libvirt was changed to delay the final cleanup of device removal
until the qemu process had signaled it with a DEVICE_DELETED event for
that device, the hostdev removal function
(qemuDomainRemoveHostDevice()) was written to properly handle the
removal of a hostdev that was actually an SRIOV virtual function
(defined with <interface type='hostdev'>). However, the function used
to search for a device matching the alias name provided in the
DEVICE_DELETED message (virDomainDefFindDevice()) would search through
the list of netdevs before hostdevs, so qemuDomainRemoveHostDevice()
was never called; instead the netdev function,
qemuDomainRemoveNetDevice() (which *doesn't* properly cleanup after
removal of <interface type='hostdev'>), was called.
(As a reminder - each <interface type='hostdev'> results in a
virDomainNetDef which contains a virDomainHostdevDef having a parent
type of VIR_DOMAIN_DEVICE_NET, and parent.data.net pointing back to
the virDomainNetDef; both Defs point to the same device info object
(and the info contains the device's "alias", which is used by qemu to
identify the device). The virDomainHostdevDef is added to the domain's
hostdevs list *and* the virDomainNetDef is added to the domain's nets
list, so searching either list for a particular alias will yield a
positive result.)
This function modifies the qemuDomainRemoveNetDevice() to short
circuit itself and call qemu DomainRemoveHostDevice() instead when the
actual device is a VIR_DOMAIN_NET_TYPE_HOSTDEV (similar logic to what
is done in the higher level qemuDomainDetachNetDevice())
Note that even if virDomainDefFindDevice() changes in the future so
that it finds the hostdev entry first, the current code will continue
to work properly.
This function was called in three places, and in each the call was
qualified by a slightly different conditional. In reality, this
function should only be called for a hostdev if all of the following
are true:
1) mode='subsystem'
2) type='pci'
3) there is a parent device definition which is an <interface>
(VIR_DOMAIN_DEVICE_NET)
We can simplify the callers and make them more consistent by checking
these conditions at the top ov qemuDomainHostdevNetConfigRestore and
returning 0 if one of them isn't satisfied.
The location of the call to qemuDomainHostdevNetConfigRestore() has
also been changed in the hot-plug case - it is moved into the caller
of its previous location (i.e. from qemuDomainRemovePCIHostDevice() to
qemuDomainRemoveHostDevice()). This was done to be more consistent
about which functions pay attention to whether or not this is one of
the special <interface> hostdevs or just a normal hostdev -
qemuDomainRemoveHostDevice() already contained a call to
networkReleaseActualDevice() and virDomainNetDefFree(), so it makes
sense for it to also handle the resetting of the device's MAC address
and vlan tag (which is what's done by
qemuDomainHostdevNetConfigRestore()).
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering
virCommandAddEnvPassAllowSUID
virCommandAddEnvPassBlockSUID
And make virCommandAddEnvPassCommon use the appropriate
ones
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit e3ef20d7 allows user to configure migration ports range via
qemu.conf. However, it forgot to update augeas definition file and
even the test data was malicious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1019053
When we migrate vms concurrently, there's a chance that libvirtd on
destination assigns the same port for different migrations, which will
lead to migration failure during prepare phase on destination. So we use
virPortAllocator here to solve the problem.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The header definition didn't match the function declaration, so adjusted
header to reflect the definition.
Found during a Coverity build where STATIC_ANALYSIS is enabled resulting
in the internal.h adding __nonnull__ handling to arguments.
Commit '6d264c91' added support for the qemuMonitorJSONDrivePivot() and
commit 'fbc3adc9' added a corresponding test which ended up triggering
the build failure which I didn't notice until today!
QEMU has support for SASL auth for SPICE guests, but libvirt
has no way to enable it. Following the example from VNC where
it is globally enabled via qemu.conf
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The last argument of memmove is the amount of bytes to be moved. The
amount is in Bytes. We are moving some void pointers around. However,
since sizeof(void *) is not Byte on any architecture, we've got the
arithmetic wrong.
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/qemu.
* src/qemu/qemu_bridge_filter.h (networkAllowMacOnPort)
(networkDisallowMacOnPort): Use intended type.
* src/qemu/qemu_bridge_filter.c (networkAllowMacOnPort)
(networkDisallowMacOnPort): Likewise.
* src/qemu/qemu_command.c (qemuBuildTPMBackendStr)
(qemuBuildTPMDevStr, qemuBuildCpuArgStr)
(qemuBuildObsoleteAccelArg, qemuBuildMachineArgStr)
(qemuBuildSmpArgStr, qemuBuildNumaArgStr): Likewise.
* src/qemu/qemu_conf.c (qemuSharedDeviceEntryCopy): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSaveImageStartVM): Likewise.
* src/qemu/qemu_hostdev.c
(qemuDomainHostdevNetConfigVirtPortProfile): Likewise.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONAttachCharDevCommand): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/conf/domain_conf, and their fallout.
Several things to note: virObjectLock() requires a non-const
argument; if this were C++, we could treat the locking field
as 'mutable' and allow locking an otherwise 'const' object, but
that is a more invasive change, so I instead dropped attempts
to be const-correct on domain lookup. virXMLPropString and
friends require a non-const xmlNodePtr - this is because libxml2
is not a const-correct library. We could make the src/util/virxml
wrappers cast away const, but I figured it was easier to not
try to mark xmlNodePtr as const. Finally, virDomainDeviceDefCopy
was a rather hard conversion - it calls virDomainDeviceDefPostParse,
which in turn in the xen driver was actually modifying the domain
outside of the current device being visited. We should not be
adding a device on the first per-device callback, but waiting until
after all per-device callbacks are complete.
* src/conf/domain_conf.h (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainObjAssignDef, virDomainObjListAdd): Drop attempt at
const.
(virDomainDeviceDefCopy): Use intended type.
(virDomainDeviceDefParse, virDomainDeviceDefPostParseCallback)
(virDomainVideoDefaultType, virDomainVideoDefaultRAM)
(virDomainChrGetDomainPtrs): Make const-correct.
* src/conf/domain_conf.c (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainDeviceDefCopy, virDomainObjListAdd)
(virDomainObjAssignDef, virDomainHostdevSubsysUsbDefParseXML)
(virDomainHostdevSubsysPciOrigStatesDefParseXML)
(virDomainHostdevSubsysPciDefParseXML)
(virDomainHostdevSubsysScsiDefParseXML)
(virDomainControllerModelTypeFromString)
(virDomainTPMDefParseXML, virDomainTimerDefParseXML)
(virDomainSoundCodecDefParseXML, virDomainSoundDefParseXML)
(virDomainWatchdogDefParseXML, virDomainRNGDefParseXML)
(virDomainMemballoonDefParseXML, virDomainNVRAMDefParseXML)
(virSysinfoParseXML, virDomainVideoAccelDefParseXML)
(virDomainVideoDefParseXML, virDomainHostdevDefParseXML)
(virDomainRedirdevDefParseXML)
(virDomainRedirFilterUsbDevDefParseXML)
(virDomainRedirFilterDefParseXML, virDomainIdMapEntrySort)
(virDomainIdmapDefParseXML, virDomainVcpuPinDefParseXML)
(virDiskNameToBusDeviceIndex, virDomainDeviceDefCopy)
(virDomainVideoDefaultType, virDomainHostdevAssignAddress)
(virDomainDeviceDefPostParseInternal, virDomainDeviceDefPostParse)
(virDomainChrGetDomainPtrs, virDomainControllerSCSINextUnit)
(virDomainSCSIDriveAddressIsUsed)
(virDomainDriveAddressIsUsedByDisk)
(virDomainDriveAddressIsUsedByHostdev): Fix fallout.
* src/openvz/openvz_driver.c (openvzDomainDeviceDefPostParse):
Likewise.
* src/libxl/libxl_domain.c (libxlDomainDeviceDefPostParse):
Likewise.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse)
(qemuDomainDefaultNetModel): Likewise.
* src/lxc/lxc_domain.c (virLXCDomainDeviceDefPostParse):
Likewise.
* src/uml/uml_driver.c (umlDomainDeviceDefPostParse): Likewise.
* src/xen/xen_driver.c (xenDomainDeviceDefPostParse): Split...
(xenDomainDefPostParse): ...since per-device callback is not the
time to be adding a device.
Signed-off-by: Eric Blake <eblake@redhat.com>
virDomainChrGetDomainPtrs() required 4 levels of pointers (taking
a parameter that will be used as an output variable to return the
address of another variable that contains an array of pointers).
This is rather complex to reason about, especially when outside
of the domain_conf file, no other caller should be modifying
the resulting array of pointers directly. Changing the public
signature gives something is easier to reason with, and actually
make const-correct; which is important as it was the only function
that was blocking virDomainDeviceDefCopy from treating its source
as const.
* src/conf/domain_conf.h (virDomainChrGetDomainPtrs): Use simpler
types, and make const-correct for external users.
* src/conf/domain_conf.c (virDomainChrGetDomainPtrs): Split...
(virDomainChrGetDomainPtrsInternal): ...into an internal version
that lets us modify terms, vs. external form that is read-only.
(virDomainDeviceDefPostParseInternal, virDomainChrFind)
(virDomainChrInsert): Adjust callers.
* src/qemu/qemu_command.c (qemuGetNextChrDevIndex): Adjust caller.
(qemuDomainDeviceAliasIndex): Make const-correct.
Signed-off-by: Eric Blake <eblake@redhat.com>
The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for external checkpoints
although it shares most of the backend code.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1017227
The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for managed save although
it shares most of the backend code.
After my patches, some functions gained one more argument
(@listenAddress) which wasn't included in debug printing of
arguments they were called with. Functions in question are:
qemuMigrationPrepareDirect and qemuMigrationPerform.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed a SIGSEGV-ing libvirtd on the destination when the qemu
died too quickly = in Prepare phase. What is happening here is:
1) [Thread 3493] We are in qemuMigrationPrepareAny() and calling
qemuProcessStart() which subsequently calls qemuProcessWaitForMonitor()
and qemuConnectMonitor(). So far so good. The qemuMonitorOpen()
succeeds, however switching monitor to QMP mode fails as qemu died
meanwhile. That is qemuMonitorSetCapabilities() returns -1.
2013-10-08 15:54:10.629+0000: 3493: debug : qemuMonitorSetCapabilities:1356 : mon=0x14a53da0
2013-10-08 15:54:10.630+0000: 3493: debug : qemuMonitorJSONCommandWithFd:262 : Send command '{"execute":"qmp_capabilities","id":"libvirt-1"}' for write with FD -1
2013-10-08 15:54:10.630+0000: 3493: debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE: watch=17 events=13
...
2013-10-08 15:54:10.631+0000: 3493: debug : qemuMonitorSend:956 : QEMU_MONITOR_SEND_MSG: mon=0x14a53da0 msg={"execute":"qmp_capabilities","id":"libvirt-1"}
fd=-1
2013-10-08 15:54:10.631+0000: 3262: debug : virEventPollRunOnce:641 : Poll got 1 event(s)
2) [Thread 3262] The event loop is trying to do the talking to monitor.
However, qemu is dead already, remember?
2013-10-08 15:54:13.436+0000: 3262: error : qemuMonitorIORead:551 : Unable to read from monitor: Connection reset by peer
2013-10-08 15:54:13.516+0000: 3262: debug : virFileClose:90 : Closed fd 25
...
2013-10-08 15:54:13.533+0000: 3493: debug : qemuMonitorSend:968 : Send command resulted in error internal error: early end of file from monitor: possible problem:
3) [Thread 3493] qemuProcessStart() failed. No big deal. Go to the
'endjob' label and subsequently to the 'cleanup'. Since the domain is
not persistent and ret is -1, the qemuDomainRemoveInactive() is called.
This has an (unpleasant) effect of virObjectUnref()-in the @vm object.
Unpleasant because the event loop which is about to trigger EOF callback
still holds a pointer to the @vm (not the reference). See the valgrind
output below.
4) [Thread 3262] So the event loop starts triggering EOF:
2013-10-08 15:54:13.542+0000: 3262: debug : qemuMonitorIO:729 : Triggering EOF callback
2013-10-08 15:54:13.543+0000: 3262: debug : qemuProcessHandleMonitorEOF:294 : Received EOF on 0x14549110 'migt10'
And the monitor is cleaned up. This results in calling
qemuProcessHandleMonitorEOF with the @vm pointer passed. The pointer is
kept in qemuMonitor struct.
==3262== Thread 1:
==3262== Invalid read of size 4
==3262== at 0x77ECCAA: pthread_mutex_lock (in /lib64/libpthread-2.15.so)
==3262== by 0x52FAA06: virMutexLock (virthreadpthread.c:85)
==3262== by 0x52E3891: virObjectLock (virobject.c:320)
==3262== by 0x11626743: qemuProcessHandleMonitorEOF (qemu_process.c:296)
==3262== by 0x11642593: qemuMonitorIO (qemu_monitor.c:730)
==3262== by 0x52BD526: virEventPollDispatchHandles (vireventpoll.c:501)
==3262== by 0x52BDD49: virEventPollRunOnce (vireventpoll.c:648)
==3262== by 0x52BBC68: virEventRunDefaultImpl (virevent.c:274)
==3262== by 0x542D3D9: virNetServerRun (virnetserver.c:1112)
==3262== by 0x11F368: main (libvirtd.c:1513)
==3262== Address 0x14549128 is 24 bytes inside a block of size 136 free'd
==3262== at 0x4C2AF5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==3262== by 0x529B1FF: virFree (viralloc.c:580)
==3262== by 0x52E3703: virObjectUnref (virobject.c:270)
==3262== by 0x531557E: virDomainObjListRemove (domain_conf.c:2355)
==3262== by 0x1160E899: qemuDomainRemoveInactive (qemu_domain.c:2061)
==3262== by 0x1163A0C6: qemuMigrationPrepareAny (qemu_migration.c:2450)
==3262== by 0x1163A923: qemuMigrationPrepareDirect (qemu_migration.c:2626)
==3262== by 0x11682D71: qemuDomainMigratePrepare3Params (qemu_driver.c:10309)
==3262== by 0x53B0976: virDomainMigratePrepare3Params (libvirt.c:7266)
==3262== by 0x1502D3: remoteDispatchDomainMigratePrepare3Params (remote.c:4797)
==3262== by 0x12DECA: remoteDispatchDomainMigratePrepare3ParamsHelper (remote_dispatch.h:5741)
==3262== by 0x54322EB: virNetServerProgramDispatchCall (virnetserverprogram.c:435)
The mon->vm is set in qemuMonitorOpenInternal() which is the correct
place to increase @vm ref counter. The correct place to decrease the ref
counter is then qemuMonitorDispose().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This configuration knob is there to override default listen address for
-incoming for all qemu domains.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=994364
Whenever we check for ABI stability, we have new xml (e.g. provided by
user, or obtained from snapshot, whatever) which we compare to old xml
and see if ABI won't break. However, if the new xml was produced via
virDomainGetXMLDesc(..., VIR_DOMAIN_XML_MIGRATABLE) it lacks some
devices, e.g. 'pci-root' controller. Hence, the ABI stability check
fails even though it is stable. Moreover, we can't simply fix
virDomainDefCheckABIStability because removing the correct devices is
task for the driver. For instance, qemu driver wants to remove the usb
controller too, while LXC driver doesn't. That's why we need special
qemu wrapper over virDomainDefCheckABIStability which removes the
correct devices from domain XML, produces MIGRATABLE xml and calls the
check ABI stability function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
At the beginning of the function qemuPrepareHostdevPCICheckSupport() is
called. After that @pcidevs is initialized. However, if the very first
command fails, we go to 'cleanup' label where virObjectUnref(pcidevs) is
called. Obviously, it is called before @pcidevs was able to get
initialized. Compiler warns about it:
CC qemu/libvirt_driver_qemu_impl_la-qemu_hostdev.lo
qemu/qemu_hostdev.c: In function 'qemuPrepareHostdevPCIDevices':
qemu/qemu_hostdev.c:824:19: error: 'pcidevs' may be used uninitialized in this function [-Werror=maybe-uninitialized]
virObjectUnref(pcidevs);
^
cc1: all warnings being treated as errors
Prefer using VFIO (if available) to the legacy KVM device passthrough.
With this patch a PCI passthrough device without the driver configured
will be started with VFIO if it's available on the host. If not legacy
KVM passthrough is checked and error is reported if it's not available.
Add code to check availability of PCI passhthrough using VFIO and the
legacy KVM passthrough and use it when starting VMs and hotplugging
devices to live machine.
The virConnectPtr is passed around loads of nwfilter code in
order to provide it as a parameter to the callback registered
by the virt drivers. None of the virt drivers use this param
though, so it serves no purpose.
Avoiding the need to pass a virConnectPtr means that the
nwfilterStateReload method no longer needs to open a bogus
QEMU driver connection. This addresses a race condition that
can lead to a crash on startup.
The nwfilter driver starts before the QEMU driver and registers
some callbacks with DBus to detect firewalld reload. If the
firewalld reload happens while the QEMU driver is still starting
up though, the nwfilterStateReload method will open a connection
to the partially initialized QEMU driver and cause a crash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1012824https://bugzilla.redhat.com/show_bug.cgi?id=1012834
Note that a similar problem was reported in:
https://bugzilla.redhat.com/show_bug.cgi?id=827519
but the fix only worked for <interface type='hostdev'>, *not* for
<interface type='network'> where the network itself was a pool of
hostdevs.
The symptom in both cases was this error message:
internal error: Unable to determine device index for network device
In both cases the cause was lack of proper handling for netdevs
(<interface>) of type='hostdev' when scanning the netdev list looking
for alias names in qemuAssignDeviceNetAlias() - those that aren't
type='hostdev' have an alias of the form "net%d", while those that are
hostdev use "hostdev%d". This special handling was completely lacking
prior to the fix for Bug 827519 which was:
When searching for the highest alias index, libvirt looks at the alias
for each netdev and if it is type='hostdev' it ignores the entry. If
the type is not hostdev, then it expects the "net%d" form; if it
doesn't find that, it fails and logs the above error message.
That fix works except in the case of <interface type='network'> where
the network uses hostdev (i.e. the network is a pool of VFs to be
assigned to the guests via PCI passthrough). In this case, the check
for type='hostdev' would fail because it was done as:
def->net[i]->type == VIR_DOMAIN_NET_TYPE_HOSTDEV
(which compares what was written in the config) when it actually
should have been:
virDomainNetGetActualType(def->net[i]) == VIR_DOMAIN_NET_TYPE_HOSTDEV
(which compares the type of netdev that was actually allocated from
the network at runtime).
Of course the latter wouldn't be of any use if the netdevs of
type='network' hadn't already acquired their actual network connection
yet, but manual examination of the code showed that this is never the
case.
While looking through qemu_command.c, two other places were found to
directly compare the net[i]->type field rather than getting actualType:
* qemuAssignDeviceAliases() - in this case, the incorrect comparison
would cause us to create a "net%d" alias for a netdev with
type='network' but actualType='hostdev'. This alias would be
subsequently overwritten by the proper "hostdev%d" form, so
everything would operate properly, but a string would be
leaked. This patch also fixes this problem.
* qemuAssignDevicePCISlots() - would defer assigning a PCI address to
a netdev if it was type='hostdev', but not for type='network +
actualType='hostdev'. In this case, the actual device usually hasn't
been acquired yet anyway, and even in the case that it has, there is
no practical difference between assigning a PCI address while
traversing the netdev list or while traversing the hostdev
list. Because changing it would be an effective NOP (but potentially
cause some unexpected regression), this usage was left unchanged.
