There have been several instances of people having problems with
a broken managed save file, and not aware that they could use
'virsh managedsave-remove dom' to fix things. Making it possible
to do this as part of starting a domain makes the same functionality
easier to find, and one less API call.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_START_FORCE_BOOT): New
flag.
* src/libvirt.c (virDomainCreateWithFlags): Document it.
* src/qemu/qemu_driver.c (qemuDomainObjStart): Alter signature.
(qemuAutostartDomain, qemuDomainStartWithFlags): Update callers.
* tools/virsh.c (cmdStart): Expose it in virsh.
* tools/virsh.pod (start): Document it.
The QEMU 'sendkey' command expects keys to be encoded in the same
way as the RFB extended keycode set. Specifically it wants extended
keys to have the high bit of the first byte set, while the Linux
XT KBD driver codeset uses the low bit of the second byte. To deal
with this we introduce a new keymap 'RFB' and use that in the QEMU
driver
* include/libvirt/libvirt.h.in: Add VIR_KEYCODE_SET_RFB
* src/qemu/qemu_driver.c: Use RFB keycode set instead of XT KBD
* src/util/virkeycode-mapgen.py: Auto-generate the RFB keycode
set from the XT KBD set
* src/util/virkeycode.c: Add RFB keycode entry to table. Add a
verify check on cardinality of the codeOffset table
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.
* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
Make MIGRATION_OUT use the new helper methods.
This also introduces new protection to migration v3 process: the
migration job is held from Begin to Confirm to avoid changes to a domain
during migration (esp. between Begin and Perform phases). This change is
automatically applied to p2p and tunneled migrations. For normal
migration, this requires support from a client. In other words, if an
old (pre 0.9.4) client starts normal migration of a domain, the domain
will not be protected against changes between Begin and Perform steps.
When an operation started by virDomainBlockPull completes (either with
success or with failure), raise an event to indicate the final status.
This API allow users to avoid polling on virDomainGetBlockJobInfo if
they would prefer to use an event mechanism.
* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/remote_protocol-structs: structure definitions for protocol verification
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
from QEMU monitor
Set up the types for the block pull functions and insert them into the
virDriver structure definition. Symbols are exported in this patch to
prevent
documentation compile failures.
* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings
* are
implemented later
* src/libvirt_public.syms: export symbols
* docs/apibuild.py: Extend 'unsigned long' parameter exception to this
* API
Modifying the xml on either save or restore only gets you so
far - you have to remember to 'virsh dumpxml dom' just prior
to the 'virsh save' in order to have an xml file worth modifying
that won't be rejected due to abi breaks. To make this more
powerful, we need a way to grab the xml embedded within a state
file, and from there, it's not much harder to also support
modifying a state file in-place.
Also, virDomainGetXMLDesc didn't document its flags.
* include/libvirt/libvirt.h.in (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New prototypes.
* src/libvirt.c (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveImageGetXMLDesc)
(virDrvDomainSaveImgeDefineXML): New driver callbacks.
VIR_ERR_INVALID_ARG implies that an argument cannot possibly
be correct, given the current state of the API.
VIR_ERR_CONFIG_UNSUPPORTED implies that a configuration is
wrong, but arguments aren't configuration.
VIR_ERR_NO_SUPPORT implies that a function is completely
unimplemented.
But in the case of a function that is partially implemented,
yet the full power of the API is not available for that
driver, none of the above messages make sense. Hence a new
error message, implying that the argument is known to comply
with the current state of the API, and that while the driver
supports aspects of the function, it does not support that
particular use of the argument.
A good use case for this is a driver that supports
virDomainSaveFlags, but not the dxml argument of that API.
It might be feasible to also use this new error for all functions
that check flags, and which accept fewer flags than what is possible
in the public API. But doing so would get complicated, since
neither libvirt.c nor the remote driver may do flag filtering,
and every other driver would have to do a two-part check, first
using virCheckFlags on all public flags (which gives
VIR_ERR_INVALID_ARG for an impossible flag), followed by a
particular mask check for VIR_ERR_ARGUMENT_UNSUPPORTED (for a
possible public flag but unsupported by this driver).
* include/libvirt/virterror.h (VIR_ERR_ARGUMENT_UNSUPPORTED): New
error.
* src/util/virterror.c (virErrorMsg): Give it a message.
Suggested by Daniel P. Berrange.
This introduces new API virDomainDestroyFlags to allow
domain destroying with flags, as the existing API virDomainDestroy
misses flags.
The set of flags is defined in virDomainDestroyFlagsValues enum,
which is currently commented, because it is empty.
Calling this API with no flags set (@flags == 0) is equivalent calling
virDomainDestroy.
In order to choose whether to use O_DIRECT when saving a domain image
to a file, we need a new flag. But virDomainSave was implemented
before our policy of all new APIs having a flag argument. Likewise
for virDomainRestore when restoring from a file.
The new flag name is chosen as CACHE_BYPASS so as not to preclude
a future solution that uses posix_fadvise once the Linux kernel has
a smarter implementation of that interface.
* include/libvirt/libvirt.h.in (virDomainCreateFlags)
(virDomainCoreDumpFlags): Add a flag.
(virDomainSaveFlags, virDomainRestoreFlags): New prototypes.
* src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveFlags, virDrvDomainRestoreFlags):
New driver callbacks.
Add virtkey lib for usage-improvment and keycode translating.
Add 4 internal API for the aim
const char *virKeycodeSetTypeToString(int codeset);
int virKeycodeSetTypeFromString(const char *name);
int virKeycodeValueFromString(virKeycodeSet codeset, const char *keyname);
int virKeycodeValueTranslate(virKeycodeSet from_codeset,
virKeycodeSet to_offset,
int key_value);
* include/libvirt/libvirt.h.in: extend virKeycodeSet enum
* src/Makefile.am: add new virtkeycode module and rule to generate
virkeymaps.h
* src/util/virkeycode.c src/util/virkeycode.h: new module
* src/util/virkeycode-mapgen.py: python generator for virkeymaps.h
out of keymaps.csv
* src/libvirt_private.syms: extend private symbols for new module
* .gitignore: add generated virkeymaps.h
This introduces a new API virDomainUndefineFlags to control the
domain undefine process, as the existing API virDomainUndefine
doesn't support flags.
Currently only flag VIR_DOMAIN_UNDEFINE_MANAGED_SAVE is supported.
If the domain has a managed save image, including
VIR_DOMAIN_UNDEFINE_MANAGED_SAVE in @flags will also remove that
file, and omitting the flag will cause undefine process to fail.
This patch also changes the behavior of virDomainUndefine, if the
domain has a managed save image, the undefine will be refused.
This patch extends virDomainSetVcpusFlags API to support
VIR_DOMAIN_AFFECT_CURRENT flag.
Now because most APIs accept VIR_DOMAIN_AFFECT_CURRENT flags,
virDomainSetVcpusFlags API should also do.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Introduce a new API in libvirt-qemu.so
virDomainPtr virDomainQemuAttach(virConnectPtr domain,
unsigned long long pid,
unsigned int flags);
This allows libvirtd to attach to an existing, externally
launched QEMU process. This is useful for QEMU developers who
prefer to launch QEMU themselves for debugging/devel reasons,
but still want the benefit of libvirt based tools like
virt-top, virt-viewer, etc
* include/libvirt/libvirt-qemu.h: Define virDomainQemuAttach
* src/driver.h, src/libvirt-qemu.c, src/libvirt_qemu.syms:
Driver glue for virDomainQemuAttach
Most APIs use 'unsigned int flags'; but a few stragglers were using
a signed value. In particular, the vir*GetXMLDesc APIs were
split-brain, with inconsistent choice of types. Although it is
an API break to use 'int' instead of 'unsigned int', it is ABI
compatible (pre-compiled apps will have no difference in behavior),
and generally apps can be recompiled without any issue (only rare
apps that compiled with extremely high warning levels, or which
pass libvirt API around as typed function pointers, would have to
make any code changes to deal with the change).
The migrate APIs use 'unsigned long flags', which can't be changed,
due to ABI constraints.
This patch intentionally touches only the public API, to prove the
claim that most existing code (including driver callbacks and virsh)
still compiles just fine in spite of the type change.
* include/libvirt/libvirt.h.in (virConnectOpenAuth)
(virDomainCoreDump, virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc): Use unsigned int for flags.
(virDomainHasCurrentSnapshot): Use consistent spelling.
* src/libvirt.c (virConnectOpenAuth, virDomainCoreDump)
(virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc, do_open): Update accordingly.
We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words. Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling. For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.
* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.
This patch introduces a new libvirt API (virDomainGetVcpupinInfo),
as a counterpart to virDomainPinVcpuFlags.
We can use virDomainGetVcpus API to retrieve CPU affinity information,
but can't use this API against inactive domains (at least in case of KVM),
as it lacks a flags parameter.
The usual thing is to add a new virDomainGetVcpusFlags, but that API name
is already occupied by the counterpart to virDomainGetMaxVcpus, which
has a completely different signature.
The virDomainGetVcpupinInfo is the new API to retrieve CPU affinity
information of active and inactive domains. While the usual convention
is to list an array before its length, this API violates that rule
in order to be more like virDomainGetVcpus (where maxinfo was doing
double-duty as the length of two different arrays).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
If an application is using libvirt + KVM as a piece of its
internal infrastructure to perform a specific task, it can
be desirable to guarentee the VM dies when the virConnectPtr
disconnects from libvirtd. This ensures the app can't leak
any VMs it was using. Adding VIR_DOMAIN_START_AUTOKILL as
a flag when starting guests enables this to be done.
* include/libvirt/libvirt.h.in: All VIR_DOMAIN_START_AUTOKILL
* src/qemu/qemu_driver.c: Support automatic killing of guests
upon connection close
* tools/virsh.c: Add --autokill flag to 'start' and 'create'
commands
Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.
v2:
Actually add APIs to libvirt.h
Even though rpc uses 'unsigned int' for the _len parameter that
passes the length of item<length>, the public libvirt APIs all
use 'int' and filter out lengths < 0, except for virDomainSendKey.
* include/libvirt/libvirt.h.in (virDomainSendKey): All other APIs
use int for array length.
* src/libvirt.c (virDomainSendKey): Adjust.
* src/driver.h (virDrvDomainSendKey): Likewise.
* daemon/remote_generator.pl: Likewise.
When an operation started by virDomainBlockPullAll completes (either with
success or with failure), raise an event to indicate the final status. This
allows an API user to avoid polling on virDomainBlockPullInfo if they would
prefer to use the event mechanism.
* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
from QEMU monitor
Signed-off-by: Adam Litke <agl@us.ibm.com>
Set up the types for the block pull functions and insert them into the
virDriver structure definition. Symbols are exported in this patch to prevent
documentation compile failures.
* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings are
implemented later
* src/libvirt_public.syms: export symbols
Signed-off-by: Adam Litke <agl@us.ibm.com>
Add public virDomainSendKey() and enum libvirt_keycode_set
for the @codeset.
Python version of virDomainSendKey() has not been implemented yet,
it will be done soon.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Qemu once supported following memory stats which will returned by
"query_balloon":
stat_put(dict, "actual", actual);
stat_put(dict, "mem_swapped_in", dev->stats[VIRTIO_BALLOON_S_SWAP_IN]);
stat_put(dict, "mem_swapped_out", dev->stats[VIRTIO_BALLOON_S_SWAP_OUT]);
stat_put(dict, "major_page_faults", dev->stats[VIRTIO_BALLOON_S_MAJFLT]);
stat_put(dict, "minor_page_faults", dev->stats[VIRTIO_BALLOON_S_MINFLT]);
stat_put(dict, "free_mem", dev->stats[VIRTIO_BALLOON_S_MEMFREE]);
stat_put(dict, "total_mem", dev->stats[VIRTIO_BALLOON_S_MEMTOT]);
But it later disabled all the stats except "actual" by commit
07b0403dfc2b2ac179ae5b48105096cc2d03375a.
libvirt doesn't parse "actual", so user will always see a empty result
with "virsh dommemstat $domain". Even qemu haven't disabled the stats,
we should support parsing "actual".
This patch deprecates following enums:
VIR_DOMAIN_MEM_CURRENT
VIR_DOMAIN_MEM_LIVE
VIR_DOMAIN_MEM_CONFIG
VIR_DOMAIN_VCPU_LIVE
VIR_DOMAIN_VCPU_CONFIG
VIR_DOMAIN_DEVICE_MODIFY_CURRENT
VIR_DOMAIN_DEVICE_MODIFY_LIVE
VIR_DOMAIN_DEVICE_MODIFY_CONFIG
And modify internal codes to use virDomainModificationImpact.
This commit is safe precisely because there has been no release
for any of the enum values being deleted (they were added post-0.9.1).
After the 0.9.2 release, we can then take advantage of
virDomainModificationImpact in more places.
* include/libvirt/libvirt.h.in (virDomainModificationImpact): New
enum.
(virDomainSchedParameterFlags, virMemoryParamFlags): Delete, since
these were never released, and the new enum works fine here.
* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainSetMemoryParameters)
(virDomainGetSchedulerParametersFlags)
(virDomainSetSchedulerParametersFlags): Update documentation.
* src/qemu/qemu_driver.c (qemuDomainSetMemoryParameters)
(qemuDomainGetMemoryParameters, qemuSetSchedulerParametersFlags)
(qemuSetSchedulerParameters, qemuGetSchedulerParametersFlags)
(qemuGetSchedulerParameters): Adjust clients.
* tools/virsh.c (cmdSchedinfo, cmdMemtune): Likewise.
Based on ideas by Daniel Veillard and Hu Tao.
Define the basic framework lock manager plugins. The
basic plugin API for 3rd parties to implemented is
defined in
src/locking/lock_driver.h
This allows dlopen()able modules for alternative locking
schemes, however, we do not install the header. This
requires lock plugins to be in-tree allowing changing of
the lock manager plugin API in future.
The libvirt code for loading & calling into plugins
is in
src/locking/lock_manager.{c,h}
* include/libvirt/virterror.h, src/util/virterror.c: Add
VIR_FROM_LOCKING
* src/locking/lock_driver.h: API for lock driver plugins
to implement
* src/locking/lock_manager.c, src/locking/lock_manager.h:
Internal API for managing locking
* src/Makefile.am: Add locking code
This introduces a new domain
VIR_DOMAIN_EVENT_ID_CONTROL_ERROR
Which uses the existing generic callback
typedef void (*virConnectDomainEventGenericCallback)(virConnectPtr conn,
virDomainPtr dom,
void *opaque);
This event is intended to be emitted when there is a failure in
some part of the domain virtualization system. Whether the domain
continues to run/exist after the failure is an implementation
detail specific to the hypervisor.
The idea is that with some types of failure, hypervisors may
prefer to leave the domain running in a "degraded" mode of
operation. For example, if something goes wrong with the QEMU
monitor, it is possible to leave the guest OS running quite
happily. The mgmt app will simply loose the ability todo various
tasks. The mgmt app can then choose how/when to deal with the
failure that occured.
* daemon/remote.c: Dispatch of new event
* examples/domain-events/events-c/event-test.c: Demo catch
of event
* include/libvirt/libvirt.h.in: Define event ID and callback
* src/conf/domain_event.c, src/conf/domain_event.h: Internal
event handling
* src/remote/remote_driver.c: Receipt of new event from daemon
* src/remote/remote_protocol.x: Wire protocol for new event
* src/remote_protocol-structs: add new event for checks
If we can choose live or config when setting, then we need to
be able to choose which one we are querying.
Also, make the documentation clear that set must use a non-empty
subset (some of the hypervisors fail if params is NULL).
* include/libvirt/libvirt.h.in
(virDomainGetSchedulerParametersFlags): New prototype.
* src/libvirt.c (virDomainGetSchedulerParametersFlags): Implement
it.
* src/libvirt_public.syms: Export it.
* python/generator.py (skip_impl): Don't auto-generate.
* src/driver.h (virDrvDomainGetSchedulerParametersFlags): New
callback.
Commit 824dcaff was a regression (thankfully unreleased) for any
client code that used 'struct _virSchedParameter' directly rather
than the preferred virSchedParameter typedef. Adding a #define
avoids even that API change, while rearranging the file makes it
clear what the old vs. new API is.
* include/libvirt/libvirt.h.in: Rearrange older names to the
bottom and improve documentation on preferred names.
(virDomainGetSchedulerParameters, virDomainSetSchedulerParameters)
(virDomainSetSchedulerParametersFlags)
(virDomainSetBlkioParameters, virDomainGetBlkioParameters)
(virDomainSetMemoryParameters, virDomainGetMemoryParameters):
Use newer type names.
* python/libvirt-override.c: Adjust code generation to cope.
Suggested by Daniel P. Berrange.
This is the API agreed on in:
https://www.redhat.com/archives/libvir-list/2011-May/msg00026.html
(with a slight name change to use "...begin" rather than
"...start"). This implements transactional changes to the host network
config. When a transaction is begun with ncf_change_begin(), all other
netcf APIs will continue to work as they always have, but a snapshot
of the existing config will be taken, allowing reversion (rollback,
using ncf_change_rollback()) to the exact state of config at the time
ncf_change_begin() was called. Alternately, if it's determined that
the new changes are acceptable, ncf_change_commit() can be called,
which will eliminate the snapshot and make the changes permanent.
As a failsafe measure, if neither ncf_change_commit() or
ncf_change_rollback() is called by the next time the system reboots,
the netcf-transaction initscript will be automatically called to
rollback the changes.
The new flags allow to pick current state, config or the live
parameter, with current being the existing API default (0).
This also hooks this to --config, --live, --current parameters for
the memtune virsh command
* include/libvirt/libvirt.h.in: defines the new flags
* tools/virsh.c: adds support at virsh level
* tools/virsh.pod: updates virsh documentation
There are two pieces of information which are desirable for
migration, which cannot be supplied by applications
- The explicit QEMU migration URI, while using Peer2Peer
migration
- An override for the target VM XML
This introduces two new public APIs to support these extra
parameters. There is no need for extra wire protocool changes,
since this is supported by the v3 migration enhancements
* include/libvirt/libvirt.h.in,
src/libvirt.c, src/libvirt_public.syms: Add virDomainMigrate2
and virDomainMigrateToURI2
The new type is identical to the three old types that it replaces,
and by creating a common type, this allows future patches to share
common code that manipulates typed parameters.
This change is backwards-compatible in API (recompilation works
without any edits) and ABI (an older client that has not been
recompiled uses the same layout) for code using only public
names; only code using private names (those beginning with _)
will have to adapt.
* include/libvirt/libvirt.h.in (virTypedParameterType)
(VIR_TYPED_PARAM_FIELD_LENGTH, _virTypedParameter): New enum,
macro, and type.
(virSchedParameter, virBlkioParameter, virMemoryParameter):
Rewrite in terms of a common type, while keeping all old public
names for backwards compatibility.
(struct _virSchedParameter, struct _virBlkioParameter)
(struct _virMemoryParameter): Delete - these are private names.
* python/generator.py (enum): Cope with the refactoring.
Add public API for taking screenshots of current domain console.
* include/libvirt/libvirt.h.in: add virDomainScreenshot
* src/libvirt_public.syms: Export new symbol
This patch introduces VIR_DOMAIN_MEM_CURRENT flag and
modifies virDomainSetMemoryFlags function to support it.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
New APIs are added allowing streaming of content to/from
storage volumes.
* include/libvirt/libvirt.h.in: Add virStorageVolUpload and
virStorageVolDownload APIs
* src/driver.h, src/libvirt.c, src/libvirt_public.syms: Stub
code for new APIs
* src/storage/storage_driver.c, src/esx/esx_storage_driver.c:
Add dummy entries in driver table for new APIs
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.
Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.
The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.
Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.
* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
src/opennebula/one_conf.c, src/opennebula/one_conf.h,
src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
to OpenNebula
* docs/drvone.html.in: Delete file
It is possible to set a migration speed limit when starting
migration. This new API allows the speed limit to be changed
on the fly to adjust to changing conditions
* src/driver.h, src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/vmware/vmware_driver.c, src/xen/xen_driver.c,
src/libxl/libxl_driver.c: Stub new API
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0. The driver is stateful and runs
privileged only.
Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI. Driver selection is based on the status
of xend. If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified. If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.
V6:
- Address several code style issues noted by Daniel Veillard
- Make drive work with xen:/// URI
- Hold domain object reference while domain is injected in
libvirt event loop. Race found and fixed by Markus Groß.
V5:
- Ensure events are unregistered when domain private data
is destroyed. Discovered and fixed by Markus Groß.
V4:
- Handle restart of libvirtd, reconnecting to previously
started domains
- Rebased to current master
- Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)
V3:
- Reserve vnc port within driver when autoport=yes
V2:
- Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
- Rebased to current master
- Plug memory leaks found by Stefano Stabellini and valgrind
- Handle SHUTDOWN_crash domain death event
[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
* Correct the documentation for cgroup: the swap_hard_limit indicates
mem+swap_hard_limit.
* Change cgroup private apis to: virCgroupGet/SetMemSwapHardLimit
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED uses INT64_MAX but stdint.h
was not and should not be included. Therefore, libvirt.h was
not self-contained.
Instead of including stdint.h specify the value directly.
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Not all applications have an existing event loop they need
to integrate with. Forcing them to implement the libvirt
event loop integration APIs is an undue burden. This just
exposes our simple poll() based implementation for apps
to use. So instead of calling
virEventRegister(....callbacks...)
The app would call
virEventRegisterDefaultImpl()
And then have a thread somewhere calling
static bool quit = false;
....
while (!quit)
virEventRunDefaultImpl()
* daemon/libvirtd.c, tools/console.c,
tools/virsh.c: Convert to public event loop APIs
* include/libvirt/libvirt.h.in, src/libvirt_private.syms: Add
virEventRegisterDefaultImpl and virEventRunDefaultImpl
* src/util/event.c: Implement virEventRegisterDefaultImpl
and virEventRunDefaultImpl using poll() event loop
* src/util/event_poll.c: Add full error reporting
* src/util/virterror.c, include/libvirt/virterror.h: Add
VIR_FROM_EVENTS
The new virConnectGetSysinfo() API allows one to get the system
information associated to a connection host, providing the same
data as a guest that uses <os><smbios mode='host'/></os>, and in
a format that can be pasted into the guest and edited when using
<os><smbios mode='sysinfo'/></os>.
* include/libvirt/libvirt.h.in (virConnectGetSysinfo): Declare.
* src/libvirt_public.syms: Export new symbol.
Currently users who want to use virDomainQemuMonitorCommand() API or
it's virsh equivalent has to use the same protocol as libvirt uses for
communication to qemu. Since the protocol is QMP with current qemu and
HMP much more usable for humans, one ends up typing something like the
following:
virsh qemu-monitor-command DOM \
'{"execute":"human-monitor-command","arguments":{"command-line":"info kvm"}}'
which is not a very convenient way of debugging qemu.
This patch introduces --hmp option to qemu-monitor-command, which says
that the provided command is in HMP. If libvirt uses QMP to talk with
qemu, the command will automatically be converted into QMP. So the
example above is simplified to just
virsh qemu-monitor-command --hmp DOM "info kvm"
Also the result is converted from
{"return":"kvm support: enabled\r\n"}
to just plain HMP:
kvm support: enabled
If libvirt talks to qemu in HMP, --hmp flag is obviously a noop.
Display or set unlimited values for memory parameters. Unlimited is
represented by INT64_MAX in memory cgroup.
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Reported-by: Justin Clift <jclift@redhat.com>
Fix glitch in commit cddd2a06 (thankfully post-0.8.6, so no
released version has the glitch).
Document and try to workaround glitch in commit 46e9b0f (in 0.8.0),
which invalidated 6 virErrorNumber values dating as far back as 0.7.1.
My audit did not find any other glitches until pre-0.1.0 days. I'm
not sure how to add a syntax-check off the top of my head, but
hopefully the explicit numbering will make people think twice about
renumbering in the future.
* include/libvirt/virterror.h (virErrorDomain): Avoid inserting
new values in the middle, and add explicit numbering to help avoid
this in the future.
(virErrorNumber): Add explicit numbering, and document the snafu.
* src/remote/remote_driver.c (remoteIO): Compensate for the snafu.
The nodeinfo structure includes
nodes : the number of NUMA cell, 1 for uniform mem access
sockets : number of CPU socket per node
cores : number of core per socket
threads : number of threads per core
which does not work well for NUMA topologies where each node does not
consist of integral number of CPU sockets.
We also have VIR_NODEINFO_MAXCPUS macro in public libvirt.h which
computes maximum number of CPUs as (nodes * sockets * cores * threads).
As a result, we can't just change sockets to report total number of
sockets instead of sockets per node. This would probably be the easiest
since I doubt anyone is using the field directly. But because of the
macro, some apps might be using sockets indirectly.
This patch leaves sockets to be the number of CPU sockets per node (and
fixes qemu driver to comply with this) on machines where sockets can be
divided by nodes. If we can't divide sockets by nodes, we behave as if
there was just one NUMA node containing all sockets. Apps interested in
NUMA should consult capabilities XML, which is what they probably do
anyway.
This way, the only case in which apps that care about NUMA may break is
on machines with funky NUMA topology. And there is a chance libvirt
wasn't able to start any guests on those machines anyway (although it
depends on the topology, total number of CPUs and kernel version).
Nothing changes at all for apps that don't care about NUMA.
introduce new public API "virDomainIsUpdated"
* src/conf/domain_conf.h (new member "updated" for "virDomainObj")
* src/libvirt_public.syms
* include/libvirt/libvirt.h.in
To avoid the need for duplicating implementations of virStream
drivers, provide a generic implementation that can handle any
FD based stream. This code is copied from the existing impl
in the QEMU driver, with the locking moved into the stream
impl, and addition of a read callback
The FD stream code will refuse to operate on regular files or
block devices, since those can't report EAGAIN properly when
they would block on I/O
* include/libvirt/virterror.h, include/libvirt/virterror.h: Add
VIR_FROM_STREAM error domain
* src/qemu/qemu_driver.c: Remove code obsoleted by the new
generic streams driver.
* src/fdstream.h, src/fdstream.c, src/fdstream.c,
src/libvirt_private.syms: Generic reusable FD based streams
To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.
* src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in, src/driver.h: Define the
new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
API entry point
QEMU allows forcing a CDROM eject even if the guest has locked the device.
Expose this via a new UpdateDevice flag, VIR_DOMAIN_DEVICE_MODIFY_FORCE.
This has been requested for RHEV:
https://bugzilla.redhat.com/show_bug.cgi?id=626305
v2: Change flag name, bool cleanups
Move existing routines about virSysinfoDef to an util module,
add a new entry point virSysinfoRead() to read the host values
with dmidecode
* src/conf/domain_conf.c src/conf/domain_conf.h src/util/sysinfo.c
src/util/sysinfo.h: move to a new module, add virSysinfoRead()
* src/Makefile.am: handle the new module build
* src/libvirt_private.syms: new internal symbols
* include/libvirt/virterror.h src/util/virterror.c: defined a new
error code for that module
* po/POTFILES.in: add new file for translations
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API
Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled
* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
API for auditing messages
API agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00456.html,
but modified for enum names to be consistent with virDomainDeviceModifyFlags.
* include/libvirt/libvirt.h.in (virDomainVcpuFlags)
(virDomainSetVcpusFlags, virDomainGetVcpusFlags): New
declarations.
* src/libvirt_public.syms: Export new symbols.
* include/libvirt/libvirt.h.in: some of the function type description
were broken so they could not be automatically documented
* src/util/event.c docs/apibuild.py: event.c exports one public API
so it needs to be scanned too, avoid a few warnings
Add proper documentation to the new VIR_DOMAIN_MEMORY_* macros in
libvirt.h.in to placate apibuild.py.
Mark args as unused in for libvirt_virDomain{Get,Set}MemoryParameters
in the Python bindings and add both to the libvirtMethods array.
Update remote_protocol-structs to placate make syntax-check.
Undo unintended modifications in vboxDomainGetInfo.
Update the function table of the VirtualBox and XenAPI drivers.
This patch adds a structure virMemoryParameter, it contains the name of
the
parameter and the type of the parameter along with a union.
dv:
+ rename enums to VIR_DOMAIN_MEMORY_PARAM_*
+ remove some extraneous tabs
v4:
+ Add unsigned int flags to the public api for future extensions
v3:
+ Protoype for virDomainGetMemoryParameters and dummy python binding.
v2:
+ Includes dummy python bindings for the library to build cleanly.
+ Define string constants like "hard_limit", etc.
+ re-order this patch.
After the recent libvirt-qemu library addition, VPATH builds fail with:
CC libvirt_qemu_la-libvirt-qemu.lo
In file included from ../../src/libvirt-qemu.c:29:
../../include/libvirt/libvirt-qemu.h:17:22: error: libvirt.h: No such file or directory
...
CCLD libvirt-qmeu.la
/usr/bin/ld: cannot open linker script file libvirt_qemu.syms: No such file or directory
This fixes both issues (there are still some documentation VPATH issues,
but those don't show up with 'make check').
* configure.ac (LIBVIRT_QEMU_SYMBOL_FILE): While libvirt.syms is
generated and lives in $(builddir), libvirt_qemu.syms is static
and lives in $(srcdir).
* include/libvirt/libvirt-qemu.h (includes): Pull in libvirt.h via
the public location, since this is a public header.
Add the library entry point for the new virDomainQemuMonitorCommand()
entry point. Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.
Changes since v1:
- Go back to using the virDriver table for qemuDomainMonitorCommand, due to
linking issues
- Added versioning information to the libvirt-qemu.so
Changes since v2:
- None
Changes since v3:
- Add LGPL header to libvirt-qemu.c
- Make virLibConnError and virLibDomainError macros instead of function calls
Changes since v4:
- Move exported symbols to libvirt_qemu.syms
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Unfortunately the NWFilter functions were outside of the
"extern C { ... }" declaration in include/libvirt/libvirt.h.in,
which means that they couldn't be properly used with C++. Move
them inside of the braces, which should fix the problem.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Support for live migration between hosts that do not share storage was
added to qemu-kvm release 0.12.1.
It supports two flags:
-b migration without shared storage with full disk copy
-i migration without shared storage with incremental copy (same base image
shared between source and destination).
I tested the live migration without shared storage (both flags) for native
and p2p with and without tunnelling. I also verified that the fix doesn't
affect normal migration with shared storage.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON
This event is the same as the previous VIR_DOMAIN_ID_IO_ERROR
event, but also includes a string describing the cause of
the event.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorReasonCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
const char *reason,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
Some applications need to be able to query a guest's disk info,
even for paths not managed by the storage pool APIs. This adds
a very simple API to get this information, modelled on the
virStorageVolGetInfo API, but with an extra field 'physical'.
Normally 'physical' and 'allocation' will be identical, but
in the case of a qcow2-like file stored inside a block device
'physical' will give the block device size, while 'allocation'
will give the qcow2 image size
* include/libvirt/libvirt.h.in: Define virDomainGetBlockInfo
virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.
* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
adds the new entry points virDomainManagedSave(),
virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
src/opennebula/one_driver.c src/openvz/openvz_driver.c
src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
src/xen/xen_driver.c: add corresponding new internal drivers entry
points
When a watchdog/IO error occurs, one of the possible actions that
QEMU might take is to pause the guest. In this scenario libvirt
needs to update its internal state for the VM, and emit a
lifecycle event:
VIR_DOMAIN_EVENT_SUSPENDED
with a detail being one of:
VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
VIR_DOMAIN_EVENT_SUSPENDED_WATCHDOG
To future proof against possible QEMU support for multiple monitor
consoles, this patch also hooks into the 'STOPPED' event in QEMU
and emits a generic VIR_DOMAIN_EVENT_SUSPENDED_PAUSED event
* include/libvirt/libvirt.h.in: Add VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
* src/qemu/qemu_driver.c: Update VM state to paused when IO error
or watchdog events occurrs
* src/qemu/qemu_monitor_json.c: Fix typo in disk IO event name
This flag is used in migration prepare step to send updated XML
definition of a guest.
Also ``virsh dumpxml --update-cpu [--inactive] guest'' command can be
used to see the updated CPU requirements.
This patch adds the implementation of the public API for the network
filtering (ACL) extensions to libvirt.c .
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
This patch adds extensions to libvirt's public API necessary for
controlling the new functionality from remote for example.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.
* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
stubs for new driver entry point
This introduces a new event type
VIR_DOMAIN_EVENT_ID_GRAPHICS
The same event can be emitted in 3 scenarios
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_CONNECT = 0,
VIR_DOMAIN_EVENT_GRAPHICS_INITIALIZE,
VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT,
} virDomainEventGraphicsPhase;
Connect/disconnect are triggered at socket accept/close.
The initialize phase is immediately after the protocol
setup and authentication has completed. ie when the
client is authorized and about to start interacting with
the graphical desktop
This event comes with *a lot* of potential information
- IP address, port & address family of client
- IP address, port & address family of server
- Authentication scheme (arbitrary string)
- Authenticated subject identity. A subject may have
multiple identities with some authentication schemes.
For example, vencrypt+sasl results in a x509dname
and saslUsername identities.
This results in a very complicated callback :-(
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4,
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV6,
} virDomainEventGraphicsAddressType;
struct _virDomainEventGraphicsAddress {
int family;
const char *node;
const char *service;
};
typedef struct _virDomainEventGraphicsAddress virDomainEventGraphicsAddress;
typedef virDomainEventGraphicsAddress *virDomainEventGraphicsAddressPtr;
struct _virDomainEventGraphicsSubject {
int nidentity;
struct {
const char *type;
const char *name;
} *identities;
};
typedef struct _virDomainEventGraphicsSubject virDomainEventGraphicsSubject;
typedef virDomainEventGraphicsSubject *virDomainEventGraphicsSubjectPtr;
typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr conn,
virDomainPtr dom,
int phase,
virDomainEventGraphicsAddressPtr local,
virDomainEventGraphicsAddressPtr remote,
const char *authScheme,
virDomainEventGraphicsSubjectPtr subject,
void *opaque);
The wire protocol is similarly complex
struct remote_domain_event_graphics_address {
int family;
remote_nonnull_string node;
remote_nonnull_string service;
};
const REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX = 20;
struct remote_domain_event_graphics_identity {
remote_nonnull_string type;
remote_nonnull_string name;
};
struct remote_domain_event_graphics_msg {
remote_nonnull_domain dom;
int phase;
remote_domain_event_graphics_address local;
remote_domain_event_graphics_address remote;
remote_nonnull_string authScheme;
remote_domain_event_graphics_identity subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>;
};
This is currently implemented in QEMU for the VNC graphics
protocol, but designed to be usable with SPICE graphics in
the future too.
* daemon/remote.c: Dispatch graphics events to client
* examples/domain-events/events-c/event-test.c: Watch for
graphics events
* include/libvirt/libvirt.h.in: Define new graphics event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle graphics events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for VNC events and emit a libvirt graphics event
* src/remote/remote_driver.c: Receive and dispatch graphics
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
graphics events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for VNC_CONNECTED,
VNC_INITIALIZED & VNC_DISCONNETED events from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_IO_ERROR_NONE = 0,
VIR_DOMAIN_EVENT_IO_ERROR_PAUSE,
VIR_DOMAIN_EVENT_IO_ERROR_REPORT,
} virDomainEventIOErrorAction;
In addition it has the source path of the disk that had the
error and its unique device alias. It does not include the
target device name (/dev/sda), since this would preclude
triggering IO errors from other file backed devices (eg
serial ports connected to a file)
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_WATCHDOG
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_WATCHDOG_NONE = 0,
VIR_DOMAIN_EVENT_WATCHDOG_PAUSE,
VIR_DOMAIN_EVENT_WATCHDOG_RESET,
VIR_DOMAIN_EVENT_WATCHDOG_POWEROFF,
VIR_DOMAIN_EVENT_WATCHDOG_SHUTDOWN,
VIR_DOMAIN_EVENT_WATCHDOG_DEBUG,
} virDomainEventWatchdogAction;
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventWatchdogCallback)(virConnectPtr conn,
virDomainPtr dom,
int action,
void *opaque);
* daemon/remote.c: Dispatch watchdog events to client
* examples/domain-events/events-c/event-test.c: Watch for
watchdog events
* include/libvirt/libvirt.h.in: Define new watchdg event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle watchdog events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for watchdogs and emit a libvirt watchdog event
* src/remote/remote_driver.c: Receive and dispatch watchdog
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
watchdog events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for WATCHDOG event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_RTC_CHANGE
This event includes the new UTC offset measured in seconds.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventRTCChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
long long utcoffset,
void *opaque);
If the guest XML configuration for the <clock> is set to
offset='variable', then the XML will automatically be
updated with the new UTC offset value. This ensures that
during migration/save/restore the new offset is preserved.
* daemon/remote.c: Dispatch RTC change events to client
* examples/domain-events/events-c/event-test.c: Watch for
RTC change events
* include/libvirt/libvirt.h.in: Define new RTC change event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle RTC change events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for RTC changes and emit a libvirt RTC change event
* src/remote/remote_driver.c: Receive and dispatch RTC change
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
RTC change events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for RTC_CHANGE event
from QEMU monitor
The reboot event is not a normal lifecycle event, since the
virtual machine on the host does not change state. Rather the
guest OS is resetting the virtual CPUs. ie, the QEMU process
does not restart. Thus, this does not belong in the current
lifecycle events callback.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_REBOOT
It takes no parameters, besides the virDomainPtr, so it can
use the generic callback signature.
* daemon/remote.c: Dispatch reboot events to client
* examples/domain-events/events-c/event-test.c: Watch for
reboot events
* include/libvirt/libvirt.h.in: Define new reboot event ID
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle reboot events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for reboots and emit a libvirt reboot event
* src/remote/remote_driver.c: Receive and dispatch reboot
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
reboot events
The current API for domain events has a number of problems
- Only allows for domain lifecycle change events
- Does not allow the same callback to be registered multiple times
- Does not allow filtering of events to a specific domain
This introduces a new more general purpose domain events API
typedef enum {
VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */
...more events later..
}
int virConnectDomainEventRegisterAny(virConnectPtr conn,
virDomainPtr dom, /* Optional, to filter */
int eventID,
virConnectDomainEventGenericCallback cb,
void *opaque,
virFreeCallback freecb);
int virConnectDomainEventDeregisterAny(virConnectPtr conn,
int callbackID);
Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature
eg
int myDomainEventCallback(virConnectPtr conn,
virDomainPtr dom,
int event,
int detail,
void *opaque)
{
...
}
virConnectDomainEventRegisterAny(conn, NULL,
VIR_DOMAIN_EVENT_ID_LIFECYCLE,
VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
NULL, NULL);
The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature
* include/libvirt/libvirt.h.in: Define new APIs for registering
domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
src/xenapi/xenapi_driver.c: Stub out new API entries
The new virDomainAbortJob() method provides a way for a second
thread to abort an ongoing job run by another thread. This
extends to any API with which the virDomainGetJobInfo() API
is intended to work. Cancellation is not guarenteed, rather best
effort on part of the hypervisor and not required to be implmented.
* include/libvirt/libvirt.h.in: Define virDomainAbortJob()
Introduce a new public API that provides a way to get progress
info on currently running jobs on a virDomainpPtr. APIs that
are initially within scope of this idea are
virDomainMigrate
virDomainMigrateToURI
virDomainSave
virDomainRestore
virDomainCoreDump
These all take a potentially long time and benefit from monitoring.
The virDomainJobInfo struct allows for various pieces of information
to be reported
- Percentage completion
- Time
- Overall data
- Guest memory data
- Guest disk/file data
* include/libvirt/libvirt.h.in: Add virDomainGetJobInfo
* python/generator.py, python/libvirt-override-api.xml,
python/libvirt-override.c: Override for virDomainGetJobInfo API
* python/typewrappers.c, python/typewrappers.h: Introduce wrapper
for unsigned long long type
Set up the types for the domainMemoryStats function and insert it into the
virDriver structure definition. Because of static initializers, update
every driver and set the new field to NULL.
* include/libvirt/libvirt.h.in: new API
* src/driver.h src/*/*_driver.c src/vbox/vbox_tmpl.c: add the new
entry to the driver structure
* python/generator.py: fix compiler errors, the actual python binding is
implemented later
* include/libvirt/virterror.h src/util/virterror.c: add new domain
VIR_FROM_CPU for errors
* src/conf/cpu_conf.c src/conf/cpu_conf.h: new parsing module
* src/Makefile.am proxy/Makefile.am: include new files
* src/conf/capabilities.[ch] src/conf/domain_conf.[ch]: reference
new code
* src/libvirt_private.syms: private export of new entry points
This is trivial for QEMU since you just have to not stop the vm before
starting the dump. And for Xen, you just pass the flag down to xend.
* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): Add VIR_DUMP_LIVE.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Support live dumping.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support live dumping.
* tools/virsh.c (opts_dump): Add --live. (cmdDump): Map it to VIR_DUMP_LIVE.
This patch adds the --crash option (already present in "xm dump-core")
to "virsh dump". virDomainCoreDump already has a flags argument, so
the API/ABI is untouched.
* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): New flag for
CoreDump
* src/test/test_driver.c (testDomainCoreDump): Do not crash
after dump unless VIR_DUMP_CRASH is given.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Shutdown the domain
instead of restarting it if --crash is passed.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support --crash.
* tools/virsh.c (opts_dump): Add --crash.
(cmdDump): Map it to flags for virDomainCoreDump and pass them.
This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.
* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend. (cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.
There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.
* src/xen/xen_driver.c: Add support for VIR_MIGRATE_PERSIST_DEST flag
* src/xen/xend_internal.c: Add support for VIR_MIGRATE_UNDEFINE_SOURCE flag
* include/libvirt/virterror.h, src/util/virterror.c: Add new errorcode
VIR_ERR_MIGRATE_PERSIST_FAILED
Introduce a number of new APIs to expose some boolean properties
of objects, which cannot otherwise reliably determined, nor are
aspects of the XML configuration.
* virDomainIsActive: Checking virDomainGetID is not reliable
since it is not possible to distinguish between error condition
and inactive domain for ID of -1.
* virDomainIsPersistent: Check whether a persistent config exists
for the domain
* virNetworkIsActive: Check whether the network is active
* virNetworkIsPersistent: Check whether a persistent config exists
for the network
* virStoragePoolIsActive: Check whether the storage pool is active
* virStoragePoolIsPersistent: Check whether a persistent config exists
for the storage pool
* virInterfaceIsActive: Check whether the host interface is active
* virConnectIsSecure: whether the communication channel to the
hypervisor is secure
* virConnectIsEncrypted: whether any network based commnunication
channels are encrypted
NB, a channel can be secure, even if not encrypted, eg if it does
not involve the network, like a UNIX socket, or pipe.
* include/libvirt/libvirt.h.in: Define public API
* src/driver.h: Define internal driver API
* src/libvirt.c: Implement public API entry point
* src/libvirt_public.syms: Export API symbols
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/interface/netcf_driver.c, src/network/bridge_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out driver tables
Some monitor commands may take a very long time to complete. It is
not desirable to block other incoming API calls forever. With this
change, if an existing API call is holding the job lock, additional
API calls will not wait forever. They will time out after a short
period of time, allowing application to retry later.
* include/libvirt/virterror.h, src/util/virterror.c: Add new
VIR_ERR_OPERATION_TIMEOUT error code
* src/qemu/qemu_driver.c: Change to a timed condition variable
wait for acquiring the monitor job lock
* include/libvirt/virterror.h src/util/virterror.c: add a new error
VIR_ERR_CONFIG_UNSUPPORTED for valid but unsupported configuration options
* src/conf/domain_conf.c: Throw an error if guestfwd address isn't IPv4
and cleanup a number of parsing return error values.
This patch adds the flag VIR_INTERFACE_XML_INACTIVE to
virInterfaceGetXMLDesc's flags. When it is*not* set (the default), the
live interface info will be returned in the XML (in particular, the IP
address(es) and netmask(s) will be retrieved by querying the interface
directly, rather than reporting what's in the config file). The
backend of this is in netcf's ncf_if_xml_state() function.
* configure.in libvirt.spec.in: requires netcf >= 0.1.3
* include/libvirt/libvirt.h.in: adds flag VIR_INTERFACE_XML_INACTIVE
* src/conf/interface_conf.c src/interface/netcf_driver.c src/libvirt.c:
update the parsing and backend routines accordingly
* tools/virsh.c: change interface edit to inactive definition and
adds the inactive flag for interface dump
Normally, when you migrate a domain from host A to host B,
the domain on host A remains defined but shutoff and the domain
on host B remains running but is a "transient". Add a new
flag to virDomainMigrate() to allow the original domain to be
undefined on source host A, and a new flag to virDomainMigrate() to
allow the new domain to be persisted on the destination host B.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Introduces several new public API options for migration
- VIR_MIGRATE_PEER2PEER: With this flag the client only
invokes the virDomainMigratePerform method, expecting
the source host driver to do whatever is required to
complete the entire migration process.
- VIR_MIGRATE_TUNNELLED: With this flag the actual data
for migration will be tunnelled over the libvirtd RPC
channel. This requires that VIR_MIGRATE_PEER2PEER is
also set.
- virDomainMigrateToURI: This is variant of the existing
virDomainMigrate method which does not require any
virConnectPtr for the destination host. Given suitable
driver support, this allows for all the same modes as
virDomainMigrate()
The URI for VIR_MIGRATE_PEER2PEER must be a valid libvirt
URI. For non-p2p migration a hypervisor specific migration
URI is used.
virDomainMigrateToURI without a PEER2PEER flag is only
support for Xen currently, and it involves XenD talking
directly to XenD, no libvirtd involved at all.
* include/libvirt/libvirt.h.in: Add VIR_MIGRATE_PEER2PEER
flag for migration
* src/libvirt_internal.h: Add feature flags for peer to
peer migration (VIR_FEATURE_MIGRATE_P2P) and direct
migration (VIR_MIGRATE_PEER2PEER mode)
* src/libvirt.c: Implement support for VIR_MIGRATE_PEER2PEER
and virDomainMigrateToURI APIs.
* src/xen/xen_driver.c: Advertise support for DIRECT migration
* src/xen/xend_internal.c: Add TODO item for p2p migration
* src/libvirt_public.syms: Export virDomainMigrateToURI
method
* src/qemu/qemu_driver.c: Add support for PEER2PEER and
migration, and adapt TUNNELLED migration.
* tools/virsh.c: Add --p2p and --direct args and use the
new virDomainMigrateToURI method where possible.
Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend. Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* include/libvirt/libvirt.h.in: Public API contract for
virStreamPtr object
* src/libvirt_public.syms: Export data stream APIs
* src/libvirt_private.syms: Export internal helper APIs
* src/libvirt.c: Data stream API driver dispatch
* src/datatypes.h, src/datatypes.c: Internal helpers for virStreamPtr
object
* src/driver.h: Define internal driver API for streams
* .x-sc_avoid_write: Ignore src/libvirt.c because it trips
up on comments including write()
* python/Makefile.am: Add libvirt-override-virStream.py
* python/generator.py: Add rules for virStreamPtr class
* python/typewrappers.h, python/typewrappers.c: Wrapper
for virStreamPtr
* docs/libvirt-api.xml, docs/libvirt-refs.xml: Regenerate
with new APIs
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in: Add
virSecretGetUsageType, virSecretGetUsageID and virLookupSecretByUsage
* python/generator.py: Mark virSecretGetUsageType, virSecretGetUsageID
as not throwing exceptions
* qemud/remote.c: Implement dispatch for virLookupSecretByUsage
* qemud/remote_protocol.x: Add usage type & ID as attributes of
remote_nonnull_secret. Add RPC calls for new public APIs
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.c, src/datatypes.h: Add usageType and usageID as
properties of virSecretPtr
* src/driver.h: Add virLookupSecretByUsage driver entry point
* src/libvirt.c: Implement virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/libvirt_public.syms: Export virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/remote_internal.c: Implement virLookupSecretByUsage entry
* src/secret_conf.c, src/secret_conf.h: Remove the
virSecretUsageType enum, now in public API. Make volume
path mandatory when parsing XML
* src/secret_driver.c: Enforce usage uniqueness when defining secrets.
Implement virSecretLookupByUsage api method
* src/virsh.c: Include usage for secret-list command
Convert all the secret/storage encryption APIs / wire format to
handle UUIDs in raw format instead of non-canonical printable
format. Guarentees data format correctness.
* docs/schemas/storageencryption.rng: Make UUID mandatory for a secret
and validate fully
* docs/schemas/secret.rng: Fully validate UUID
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in, Add
virSecretLookupByUUID and virSecretGetUUID. Make
virSecretGetUUIDString follow normal API design pattern
* python/generator.py: Skip generation of virSecretGetUUID,
virSecretGetUUIDString and virSecretLookupByUUID
* python/libvir.c, python/libvirt-python-api.xml: Manual impl
of virSecretGetUUID,virSecretGetUUIDString and virSecretLookupByUUID
* qemud/remote.c: s/virSecretLookupByUUIDString/virSecretLookupByUUID/
Fix get_nonnull_secret/make_nonnull_secret to use unsigned char
* qemud/remote_protocol.x: Fix remote_nonnull_secret to use a
remote_uuid instead of remote_nonnull_string for UUID field.
Rename REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING to
REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING and make it take an
remote_uuid value
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.h, src/datatypes.c: Store UUID in raw format instead
of printable. Change virGetSecret to use raw format UUID
* src/driver.h: Rename virDrvSecretLookupByUUIDString to
virDrvSecretLookupByUUID and use raw format UUID
* src/libvirt.c: Add virSecretLookupByUUID and virSecretGetUUID
and re-implement virSecretLookupByUUIDString and
virSecretGetUUIDString in terms of those
* src/libvirt_public.syms: Add virSecretLookupByUUID and
virSecretGetUUID
* src/remote_internal.c: Rename remoteSecretLookupByUUIDString
to remoteSecretLookupByUUID. Fix typo in args for
remoteSecretDefineXML impl. Use raw UUID format for
get_nonnull_secret and make_nonnull_secret
* src/storage_encryption_conf.c, src/storage_encryption_conf.h:
Storage UUID in raw format, and require it to be present in
XML. Use UUID parser to validate.
* secret_conf.h, secret_conf.c: Generate a UUID if none is provided.
Storage UUID in raw format.
* src/secret_driver.c: Adjust to deal with raw UUIDs. Save secrets
in a filed with printable UUID, instead of base64 UUID.
* src/virsh.c: Adjust for changed public API contract of
virSecretGetUUIDString.
* src/storage_Backend.c: DOn't undefine secret we just generated
upon successful volume creation. Fix to handle raw UUIDs. Generate
a non-clashing UUID
* src/qemu_driver.c: Change to use lookupByUUID instead of
lookupByUUIDString
This implementation stores the secrets in an unencrypted text file,
for simplicity in implementation and debugging.
(Symmetric encryption, e.g. using gpgme, will not be difficult to add.
Because the TLS private key used by libvirtd is stored unencrypted,
encrypting the secrets file does not currently provide much additional
security.)
* include/libvirt/virterror.h, src/virterror.c (VIR_ERR_NO_SECRET): New
error number.
* po/POTFILES.in, src/Makefile.am: Add secret_driver.
* bootstrap: Use gnulib's base64 module.
* src/secret_driver.c, src.secret_driver.h, src/libvirt_private.syms:
Add local secret driver.
* qemud/qemud.c (qemudInitialize): Use the local secret driver.
* include/libvirt/virterror.h, src/virterror.c: Add VIR_WAR_NO_SECRET
* src/libvirt_private.syms, src/datatypes.h, src/datatypes.c: Type
virSecret struct definition and helper APIs
* src/driver.h: Sub-driver API definitions for secrets
* src/libvirt.c: Define new sub-driver for secrets
This patch adds a "secret" as a separately managed object, using a
special-purpose API to transfer the secret values between nodes and
libvirt users.
* docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new
schema for virSecret objects
* docs/*html: Re-generated
* docs/formatsecret.html.in, docs/sitemap.html.in: Add page
describing the virSecret XML schema
* include/libvirt/libvirt.h.in: Define the new virSecret public
API
* src/libvirt_public.syms: Export symbols for new public APIs
* mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to
files list
Features supported:
- Connects to HMC/VIOS or IVM systems.
- Life cycle commands (resume and shutdown).
- dumpxml
- 'list' and 'list --all'
What is being implemented:
- better and centralized control for UUID
- definexml
- CPU management commands
* src/domain_conf.c src/domain_conf.h: first version of the driver
* configure.in src/Makefile.am include/libvirt/virterror.h
src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver
in the general framework
* src/esx/esx_*.[ch]: the driver, uses a remote minimal SOAP client
to talk to the VI services on ESX nodes.
* configure.in include/libvirt/virterror.h src/Makefile.am src/driver.h
src/libvirt.c src/virterror.c: glue in the new driver
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in: adds the new
flag VIR_MEMORY_PHYSICAL for virDomainMemoryPeek
* src/libvirt.c: update the front-end checking
* src/qemu_driver.c: extend the QEmu driver
* include/libvirt/virterror.h src/virterror.c: if a driver's
virInterfaceLookupByMACString() function finds more than one interface
with the desired MAC Address, this new error is raised.
* include/libvirt/libvirt.h[.in]: adds signatures for the new exported
functions virConnectNumOfDefinedInterfaces and
virConnectListDefinedInterfaces
* src/libvirt_public.syms: export the new symbols
* src/opennebula/one_conf.[ch] src/opennebula/one_driver.[ch]:
the OpenNebula driver
* configure.in include/libvirt/virterror.h qemud/Makefile.am
qemud/qemud.c src/Makefile.am src/domain_conf.[ch] src/driver.h
src/libvirt.c src/virterror.c: integration of the OpenNebula
driver in the libvirt infrastructure
* AUTHORS: add Abel Miguez Rodriguez
daniel
* configure.in include/libvirt/virterror.h src/Makefile.am
src/domain_conf.[ch] src/driver.h src/virterror.c src/vbox/README
src/vbox/vbox_CAPI_v2_2.h src/vbox/vbox_V2_2.c
src/vbox/vbox_XPCOMCGlue.[ch] src/vbox/vbox_driver.[ch]
src/vbox/vbox_tmpl.c: integration of the VirtualBox support
patches by Pritesh Kothari
Daniel
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/driver.h src/libvirt.c src/libvirt_public.syms
src/lxc_driver.c src/openvz_driver.c src/qemu_driver.c
src/test.c src/uml_driver.c: add the public APIs for
virNodeDeviceDettach virNodeDeviceReAttach and virNodeDeviceReset
and extends the driver structure accordingly.
Daniel
* configure.in docs/* NEWS: release of 0.5.0
* po/*: updated from the translators and merged
* docs/apibuild.py src/libvirt.c: avoid some warnings at doc
generation time
daniel
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/libvirt.c src/libvirt_sym.version: new libvirt event entry
points, big patch provided by Ben Guthro
* Makefile.am configure.in src/driver.h src/event.c src/event.h
src/internal.h src/libvirt.c src/libvirt_sym.version src/lxc_driver.c
src/openvz_driver.c src/qemu_conf.h src/qemu_driver.c
src/remote_internal.c src/storage_backend_fs.c src/test.c
qemud/event.c qemud/event.h qemud/mdns.c qemud/qemud.c
qemud/qemud.h qemud/remote.c qemud/remote_dispatch_localvars.h
qemud/remote_dispatch_proc_switch.h qemud/remote_dispatch_prototypes.h
qemud/remote_protocol.c qemud/remote_protocol.h
qemud/remote_protocol.x proxy/Makefile.am python/generator.py:
Not much is left untouched by the patch adding the events support
* docs/libvirt-api.xml docs/libvirt-refs.xml
docs/html/libvirt-libvirt.html: regenerated the docs
* examples/domain-events/events-c/Makefile.am
examples/domain-events/events-c/event-test.c: a test example
* AUTHORS: added Ben Guthro
daniel
* Makefile.maint (sync-vcs-ignore-files): New target.
Prompted by a patch from James Morris.
http://thread.gmane.org/gmane.comp.emulators.libvirt/8619/focus=8773
Add all (now-generated) .gitignore files.
* .gitignore: New file.
* build-aux/.gitignore: New file.
* docs/.gitignore: New file.
* docs/devhelp/.gitignore: New file.
* docs/examples/.gitignore: New file.
* docs/examples/python/.gitignore: New file.
* gnulib/lib/.gitignore: New file.
* gnulib/lib/arpa/.gitignore: New file.
* gnulib/lib/netinet/.gitignore: New file.
* gnulib/lib/sys/.gitignore: New file.
* gnulib/tests/.gitignore: New file.
* include/.gitignore: New file.
* include/libvirt/.gitignore: New file.
* po/.gitignore: New file.
* proxy/.gitignore: New file.
* python/.gitignore: New file.
* python/tests/.gitignore: New file.
* qemud/.gitignore: New file.
* src/.gitignore: New file.
* tests/.gitignore: New file.
* tests/confdata/.gitignore: New file.
* tests/sexpr2xmldata/.gitignore: New file.
* tests/virshdata/.gitignore: New file.
* tests/xencapsdata/.gitignore: New file.
* tests/xmconfigdata/.gitignore: New file.
* tests/xml2sexprdata/.gitignore: New file.
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in:
remove Xen centric comments patch from Guido Günther
* docs/apibuild.py: ignore VIR_DEPRECATED
* docs/libvirt-*.xml docs/html/libvirt-*.html: regenerated the
documentation for the API
Daniel
release
* src/xm_internal.c: fix xm driver serialization escapes
* tests/xmconfigtest.c tests/xmconfigdata/test-escape-paths.cfg
tests/xmconfigdata/test-escape-paths.xml: add test for previous
problem
Daniel
* include/libvirt/libvirt.h.in, src/libvirt.c, src/driver.h,
src/libvirt_sym.version: New virDomainMemoryPeek API.
* qemud/remote.c, qemud/remote_protocol.x, src/remote_internal.c:
Support for remote.
* src/qemu_driver.c: QEMU driver implementation of API.
* src/test.c: Test driver (null) implementation of API.
* docs/hvsupport.html.in: Document API.
* libvirt.spec.in: New path /var/cache/libvirt for temporary
storage of memory images.
* qemud/libvirtd.init.in: Remove any old temp files in
/var/cache/libvirt on restarts.
* src/Makefile.am: make install creates /var/cache/libvirt.
* configure.in: Detect mkdir -p.
* configure.in: Document AC_SYS_LARGEFILE.
* docs/hvsupport.html.in: Document HV support for virDomainBlockPeek.
* include/libvirt/libvirt.h.in, src/driver.h, src/libvirt.c,
src/libvirt_sym.version: Add virDomainBlockPeek infrastructure.
* src/qemu_driver.c, src/test.c: Null versions of this call.
* src/xen_unified.c, src/xend_internal.c, src/xend_internal.h,
src/xm_internal.c, src/xm_internal.h: Xen implementation.
* tests/sexpr2xmldata/sexpr2xml-curmem.xml,
tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: XML output
has been reordered slightly in the Xen driver, but should be
functionally the same.
* include/libvirt/libvirt.h.in: Add VIR_DEPRECATED macro.
* src/internal.h: Internal code is allowed to use deprecated
features, so override VIR_DEPRECATED here.
* include/libvirt/virterror.h: Deprecate the conn, dom and net
fields in the _virError structure.
Done using this command (also includes .c.in and .h.in files):
for i in $(g ls-files|grep -E '\.[ch](\.in)?$'|grep -v gnulib); do
expand -i $i > j && mv j $i;done
* configure.in include/libvirt/virterror.h src/Makefile.am
src/driver.h src/lxc_conf.[ch] src/lxc_driver.[ch] src/virterror.c:
Applied 3 patches from Dave Leskovec for intial support of
Linux containers, configured off by default, work in progress.
* src/libvirt.c: improve virDomainCreateLinux xmlDesc description
Daniel
src/libvirt.c src/qemu.conf src/remote_internal.c src/xend_internal.c
tests/confdata/libvirtd.conf tests/confdata/libvirtd.out: patch from
Atsushi SAKAI fixing a ot more typo
Daniel
* src/test.c, include/libvirt/libvirt.h.in: Remove virDomainRestart
from the public API (it was not used), and move it into the test
driver where it is used for purely internal purposes.
src/driver.h src/libvirt.c src/openvz_driver.c src/qemu_driver.c
src/test.c src/xen_unified.c src/xend_internal.c: add new API
virNodeGetFreeMemory(), extends the driver. Lacks remote and
QEmu support though.
* src/libvirt.c: allows to fix virNodeGetCellsFreeMemory() adding
parameter check for startCell.
* proxy/libvirt_proxy.c src/xend_internal.[ch]
include/libvirt/libvirt.h include/libvirt/libvirt.h.in: applied
vncpasswd dump patch from Mark Johnson but with the
virDomainXMLFlags extension as suggested by Daniel Berrange
this changed a couple of internal APIs too
* tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: fix one of the
tests affected by bootloader dump change.
Daniel
src/qemu_driver.c src/remote_internal.c src/test.c
src/xen_internal.[ch] src/xen_unified.c src/xend_internal.[ch]
src/libvirt.c src/libvirt_sym.version: adding NUMA support patches
from Beth Kon adding new virNodeGetCellsFreeMemory entry point
and extending the virConnectGetCapabilities one. Fix a couple of
issues in the patch and add to exported symbols from shared lib.
* docs/virsh.pod docs/virsh.1 src/virsh.c: added new command
freecell to get the available memory on the node or in a NUMA cell.
* docs/*: updated and regenerated the documentation
Daniel
* src/libvirt.c (virDomainMigrate): Added virDomainMigrate
API call.
* src/xend_internal.c, src/xen_unified.c: Support for migration
of Xen domains.
* src/xen_internal.c: Xen capabilities indicates level of
support for migration.
* qemud/remote.c, qemud/remote_protocol.x, src/remote_internal.c:
Support for migration between remote hypervisors.
* src/virsh.c: Added 'virsh migrate' command.
* docs/libvir.html, docs/hvsupport.html: Updated hvsupport
documentation.
src/openvz_driver.c src/qemu_driver.c src/util.c src/util.h:
cleanup patches from Shuveb Hussain, with new util module for
common code shared between drivers.
Daniel
* include/libvirt/virterror.h, src/virterror.c, src/libvirt.c:
Add VIR_ERR_NO_DOMAIN and VIR_ERR_NO_NETWORK errors, which
indicate that there is no domain/network from vir*Lookup* functions.
* src/qemu_driver.c: Use VIR_ERR_NO_DOMAIN in lookup functions.
* src/test.c: Use VIR_ERR_NO_DOMAIN in lookup functions.
* include/libvirt/libvirt.h.in, src/libvirt.c, src/libvirt_sym.version,
python/generator.py: Added virDomainGetConnect and
virNetworkGetConnect to allow us to get the "hidden"
connection associated with each domain or network.
* src/libvirt.c, src/qemu_internal.c, src/test.c,
src/xen_unified.c, src/xend_internal.c,
src/libvirt.c, include/libvirt/virterror.h:
VIR_ERR_NO_SUPPORT means the function is not supported by
the hypervisor. VIR_ERR_NO_CONNECT means the connection
failed. VIR_ERR_CALL_FAILED is deprecated. Drivers which
decline a URI now no longer produce an error. Make
xen_unified.c ignore naked URI strings like "foo".
src/driver.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/qemu_internal.c src/test.c
src/virsh.c src/xen_internal.c src/xen_internal.h src/xen_unified.c
src/xend_internal.c src/xm_internal.c src/xs_internal.c:
Applied patches from Atsushi SAKAI to add the scheduler API,
with patch from Rich Jones for error handing, and a number
of cleanups and more error checking from me
Daniel
* src/test.c, src/libvirt.c, src/virterror.c,
include/libvirt/virterror.h: Add a VIR_FROM_TEST error class
and ensure that test driver errors are from this class.
Tidy up the error messages generated by the test driver when
user doesn't add a path to the URL and avoid open ("/").
proxy/libvirt_proxy.c qemud/Makefile.am qemud/conf.c qemud/conf.h
qemud/dispatch.c qemud/internal.h qemud/protocol.h
src/driver.h src/internal.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/proxy_internal.h src/qemu_internal.c
src/test.c src/virsh.c src/virterror.c src/xen_internal.c
src/xen_internal.h src/xend_internal.c src/xm_internal.c
src/xml.h src/xs_internal.c: applied patch from Richard Jones
adding virConnectGetCapabilities(), plus various small little
fixes
* docs/*: fixed the api extractor script and regenerated
Daniel
src/driver.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/qemu_internal.c src/test.c src/virsh.c
src/xen_internal.c src/xen_internal.h src/xend_internal.c
src/xm_internal.c src/xs_internal.c: applied patch from
Masayuki Sunou to add and entry point to check the maximum
number of virtual CPU supported by a virtualization mechanism
* doc/*.html doc/libvirt-*.xml: regenerated the interfaces descriptions
and associated docs.
Daniel
* include/libvirt/libvirt.h.in, src/libvirt.c add
virDomainGetAutostart(), virDomainSetAutostart(),
virNetworkGetAutostart() and virNetworkSetAutostart().
* src/libvirt_sym.version: export the API
* src/driver.h: add methods to the driver vtables.
* src/proxy_internal.c, src/qemu_internal.c,
src/test.c, src/xen_internal.c, src/xend_internal.c,
src/xm_internal.c, src/xs_internal.c: set those
methods to NULL
Fix a few leaks
* qemud/qemud.c: qemudCleanup(): free the socket
structures
* qemud/conf.c: fix various leaks in the xml parsing
* qemud/iptables.c: fix a typo causing a leak
