Original current flag expansion does not filter out non
_CONFIG and _LIVE flags explicitly but they are prohibited
earlier by virCheckFlags.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Flag expansion is the same as in virDomainObjUpdateModificationImpact
which virDomainLiveConfigHelperMethod calls internally. The difference
is merely in implementation. Note that VIR_DOMAIN_MEM_CONFIG is the
same as VIR_DOMAIN_AFFECT_CONFIG. Additionally, the called functions
will properly use flag OR and thus handle the VIR_DOMAIN_MEM_MAXIMUM case.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
libxlDomainPinVcpuFlags calls virDomainLiveConfigHelperMethod which will
call virDomainObjUpdateModificationImpact make the same AFFECT_LIVE flags
and !active check, so remove this duplicated check.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
libxlMakeNic opens a virConnect object and takes a reference on a
virNetwork object, but doesn't drop the references on all error
paths. Rework the function to follow the standard libvirt pattern
of using a local 'ret' variable to hold the function return value,
performing all cleanup and returning 'ret' at a 'cleanup' label.
Introduce support for domainInterfaceStats API call for querying
network interface statistics. Consequently it also enables the use of
`virsh domifstat <dom> <interface name>` command plus seeing the
interfaces names instead of "-" when doing `virsh domiflist <dom>`.
After successful guest creation we fill the network interfaces names
based on domain, device id and append suffix if it's emulated in the
following form: vif<domid>.<devid>[-emu]. We extract the network
interfaces info from the libxl_domain_config object in
libxlDomainCreateIfaceNames() to generate ifname. On domain cleanup we
also clear ifname, in case it was set by libvirt (i.e. being prefixed
with "vif"). We also skip these two steps in case the name of the
interface was manually inserted by the administrator. Since the
introduction of netprefix (commit a040ba9), ifnames with a registered
prefix will be freed on virDomain{Obj,Def}Format*, thus eliminating
the migration issues observed with the reverted commit d2e5538 whereas
source and destination would have the same ifname.
For getting the interface statistics we resort to virNetInterfaceStats
and let libvirt handle the platform specific nits. Note that the
latter is not yet supported in FreeBSD.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
xl/libxl already supports qemu's network-based block backends
such as nbd and rbd. libvirt has supported configuring such
<disk>s for long time too. This patch adds support for rbd
disks in the libxl driver by generating a rbd device URL from
the virDomainDiskDef object. The URL is passed to libxl via the
pdev_path field of libxl_device_disk struct. libxl then passes
the URL to qemu for cosumption by the rbd backend.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This patch introduces keep alive messages support for P2P migration
and it adds two new configuration entries namely 'keepalive_interval'
'keepalive_count' to control it. Behavior of these entries is the
same as qemu driver thus the description is copied from there
with just a few simplifications.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for VIR_MIGRATE_PEER2PEER in libvirt migration.
Most of the changes occur at the source and no modifications at
the receiver.
In P2P mode there is only the Perform phase so we must handle the
connection with the destination and actually perform the
migration. libxlDomainPerformP2P implements the connection to the
destination and libxlDoMigrateP2P implements the actual migration
logic with virConnectPtr. In this function we take care of doing
all phases of migration in the destination similar to
virDomainMigrateVersion3Full. We appropriately save the last
error reported in each of the phases to provide proper reporting.
We don't yet support VIR_MIGRATE_TUNNELED and we always use V3
with extensible params, thus it also makes the implementation
simpler.
It is worth noting that the receiver didn't have any changes, and
since it's still the v3 sequence thus it is possible to migrate
from a P2P to non-P2P host.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The virDomainObjFormat and virDomainSaveStatus methods
both call into virDomainDefFormat, so should be providing
a non-NULL virCapsPtr instance.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the newly added virCapabilitiesSetNetPrefix to set
the network prefix for the driver. This in return will
be use by NetDefFormat() and NetDefParseXML() routines
to free any interface name that start with the registered
prefix.
Acked-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
virDomainSaveConfig calls virDomainDefFormat which was setting the caps
to NULL, thus keeping the old behaviour (i.e. not looking at
netprefix). This patch adds the virCapsPtr to the function and allows
the configuration to be saved and skipping interface names that were
registered with virCapabilitiesSetNetPrefix().
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The current code was a little bit odd. At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description. That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.
This seems to me as a lot of code for nothing. This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.
The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.
There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device. This applies also to XEN hypervisor. VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
As suggested in a previous thread [0] this patch adds some missing calls
to libxl_dominfo_{init,dispose} when doing some of the libxl_domain_info
operations which would otherwise lead to memory leaks.
[0]
https://www.redhat.com/archives/libvir-list/2015-September/msg00519.html
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The libxl_device_nic structure supports specifying an outgoing rate
limit based on a time interval and bytes allowed per interval. In xl
config a rate limit is specified as "<RATE>/s@<INTERVAL>". INTERVAL
is optional and defaults to 50ms.
libvirt expresses outgoing limits by average (required), peak, burst,
and floor attributes in units of KB/s. This patch supports the outgoing
bandwidth limit by converting the average KB/s to bytes per interval
based on the same default interval (50ms) used by xl.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This replaces the virPCIKnownStubs string array that was used
internally for stub driver validation.
Advantages:
* possible values are well-defined
* typos in driver names will be detected at compile time
* avoids having several copies of the same string around
* no error checking required when setting / getting value
The names used mirror those in the
virDomainHostdevSubsysPCIBackendType enumeration.
Remove use of xendConfigVersion in the s-expresion config formatter/parser
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Remove use of xendConfigVersion in the xm and xl config formatter/parsers
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Introduces support for domainGetJobStats which has the same
info as domainGetJobInfo but in a slightly different format.
Another difference is that virDomainGetJobStats can also
retrieve info on the most recently completed job. Though so
far this is only used in the source node to know if the
migration has been completed. But because we don't support
completed jobs we will deliver an error.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for domainGetJobInfo to get info about the
ongoing job. If the job is active it will update the
timeElapsed which is computed with the "started" field added to
struct libxlDomainJobObj. For now we support just the very basic
info and all jobs have VIR_DOMAIN_JOB_UNBOUNDED (i.e. no completion
time estimation) plus timeElapsed computed.
Openstack Kilo uses the Job API to monitor live-migration
progress which is currently nonexistent in libxl driver and
therefore leads to a crash in the nova compute node. Right
now, migration doesn't use jobs in the source node and will
return VIR_DOMAIN_JOB_NONE. Though nova handles this case and
will migrate it properly instead of crashing.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
We should make a copy of current definition to preserve a persistent
definition, because we later update the definition with live changes.
The live definition is discarded on domain shutdown and replaced by the
copy we make before starting the domain.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit d2e5538b16.
A migration regression was introduced by this commit. When migrating
a domain, its active XML is sent to the destination libvirtd, where
it is parsed as inactive XML. d2e5538b copied the libxl generated
interface name into the active config, which was being passed to the
migration destination and being parsed into inactive config. Attempting
to start the config could result in failure if an interface with the
same generated name already exists.
The qemu driver behaves similarly, but the parser contains a hack to
skip interface names starting with 'vnet' when parsing inactive XML.
We could extend the hack to skip names starting with 'vif' too, but a
better fix would be to expose these hypervisor-specific interface name
prefixes in capabilities. See the following discussion thread for more
details
https://www.redhat.com/archives/libvir-list/2015-December/msg00262.html
For the pending 1.3.0 release, it is best to revert d2e5538b. It can
be added again post release, after moving the prefix to capabilities.
Introduce support for domainInterfaceStats API call for querying
network interface statistics. Consequently it also enables the
use of `virsh domifstat <dom> <interface name>` command plus
seeing the interfaces names instead of "-" when doing
`virsh domiflist <dom>`.
After successful guest creation we fill the network
interfaces names based on domain, device id and append suffix
if it's emulated in the following form: vif<domid>.<devid>[-emu].
We extract the network interfaces info from the libxl_domain_config
object in libxlDomainCreateIfaceNames() to generate ifname. On domain
cleanup we also clear ifname, in case it was set by libvirt (i.e.
being prefixed with "vif"). We also skip these two steps in case the name
of the interface was manually inserted by the adminstrator.
For getting the interface statistics we resort to virNetInterfaceStats
and let libvirt handle the platform specific nits. Note that the latter
is not yet supported in FreeBSD.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 6472e54a unlocks the virDomainObj even if libxlDomainObjEndJob
returns false, indicating that its refcnt has dropped to 0.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Commits b6e19cf4 and 6472e54a missed unref'ing the
libxlDriverConfig object. Add missing calls to virObjectUnref.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Introduce support for domainMemoryStats API call, which
consequently enables the use of `virsh dommemstat` command to
query for memory statistics of a domain. We support
the following statistics: balloon info, available and currently
in use. swap-in, swap-out, major-faults, minor-faults require
cooperation of the guest and thus currently not supported.
We build on the data returned from libxl_domain_info and deliver
it in the virDomainMemoryStat format.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for domainGetCPUStats API call and consequently
allow us to use `virsh cpu-stats`. The latter returns a more brief
output than the one provided by`virsh vcpuinfo`.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Since the strtok_r call in libxlCapsInitGuests expects a non NULL first
parameter when the third parameter is NULL, we need to check that
the returned 'capabilities' from a libxl_get_version_info call is
not NULL and error out if so since the code expects it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871452
So, you want to create a domain from XML. The domain already
exists in libvirt's database of domains. It's okay, because name
and UUID matches. However, on domain startup, internal
representation of the domain is overwritten with your XML even
though we claim that the XML you've provided is a transient one.
The bug is to be found across nearly all the drivers.
Le sigh.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After attach-device a <hostdev> with --config, new device doesn't
show up in dumpxml and in guest.
To fix that, set dev->data.hostdev = NULL after work so that the
pointer is not freed, since vmdef has the pointer and still need it.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
libxl/libxl_conf.c: In function 'libxlDriverConfigNew':
libxl/libxl_conf.c:1560:30: error: 'log_level' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
Instead of a hardcoded DEBUG log level, use the overall
daemon log level specified in libvirtd.conf when opening
a log stream with libxl. libxl is very verbose when DEBUG
log level is set, resulting in huge log files that can
potentially fill a disk. Control of libxl verbosity should
be placed in the administrator's hands.
commit 4b53d0d4ac "libxl: don't remove persistent domain on start
failure" cleans up the vm object and sets it to NULL if the vm is not
persistent, however at end job vm (now NULL) is dereferenced via the call to
libxlDomainObjEndJob. Avoid this by skipping "endjob" and going
straight to "cleanup" in this case.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
