Apparently we are not the only ones with dumb free functions
because dbus_message_unref() does not accept NULL either. But if
I were to vote, this one is even more evil. Instead of returning
an error just like we do it immediately dereference any pointer
passed and thus crash you app. Well done DBus!
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f878ebda700 (LWP 31264)]
0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
(gdb) bt
#0 0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
#1 0x00007f87be3f004e in dbus_message_unref () from /usr/lib64/libdbus-1.so.3
#2 0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
#3 0x00007f879761bd4d in qemuConnectCgroup (driver=0x7f87600a32a0, vm=0x7f87600c7550) at qemu/qemu_cgroup.c:909
#4 0x00007f87976386b7 in qemuProcessReconnect (opaque=0x7f87600db840) at qemu/qemu_process.c:3386
#5 0x00007f87bf6edfff in virThreadHelper (data=0x7f87600d5580) at util/virthread.c:206
#6 0x00007f87bb602334 in start_thread (arg=0x7f878ebda700) at pthread_create.c:333
#7 0x00007f87bb3481bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
(gdb) frame 2
#2 0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
228 dbus_message_unref(reply);
(gdb) p reply
$1 = (DBusMessage *) 0x0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Use of an 'int' to represent a 'bool' value is confusing. Just
because dbus made the mistake of cementing their 4-byte wire
format of dbus_bool_t into their API doesn't mean we have to
repeat the mistake. With a little bit of finesse, we can
guarantee that we provide a large-enough value to the DBus
code, while still copying only the relevant one-byte bool
to the client code, and isolate the rest of our code base from
the DBus stupidity.
* src/util/virdbus.c (GET_NEXT_VAL): Add parameter.
(virDBusMessageIterDecode): Adjust all clients.
* src/util/virpolkit.c (virPolkitCheckAuth): Use nicer type.
* tests/virdbustest.c (testMessageSimple, testMessageStruct):
Test new behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
I noticed a line 'int nparams = 0;;' in remote_dispatch.h, and
tracked down where it was generated. While at it, I found a
couple of other double semicolons. Additionally, I noticed that
commit df0b57a95 left a stale reference to the file name
remote_dispatch_bodies.h.
* src/conf/numatune_conf.c (virDomainNumatuneNodeParseXML): Drop
empty statement.
* tests/virdbustest.c (testMessageStruct, testMessageSimple):
Likewise.
* src/rpc/gendispatch.pl (remote_dispatch_bodies.h): Likewise, and
update stale comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
While running virdbustest, it was found that valgrind pointed out
the following memory leaks:
==9996== 17 (8 direct, 9 indirect) bytes in 1 blocks are definitely lost in loss record 9 of 36
==9996== at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==9996== by 0x4A06B62: realloc (vg_replace_malloc.c:662)
==9996== by 0x4C6B587: virReallocN (viralloc.c:245)
==9996== by 0x4C6B6AE: virExpandN (viralloc.c:294)
==9996== by 0x4C82B54: virDBusMessageDecodeArgs (virdbus.c:907)
==9996== by 0x4C83463: virDBusMessageDecode (virdbus.c:1141)
==9996== by 0x402C45: testMessageArrayRef (virdbustest.c:273)
==9996== by 0x404E71: virtTestRun (testutils.c:201)
==9996== by 0x401C2D: mymain (virdbustest.c:479)
==9996== by 0x4055ED: virtTestMain (testutils.c:789)
==9996== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==9996==
==9996== 28 (16 direct, 12 indirect) bytes in 1 blocks are definitely lost in loss record 12 of 36
==9996== at 0x4A06BE0: realloc (vg_replace_malloc.c:662)
==9996== by 0x4C6B587: virReallocN (viralloc.c:245)
==9996== by 0x4C6B6AE: virExpandN (viralloc.c:294)
==9996== by 0x4C82B54: virDBusMessageDecodeArgs (virdbus.c:907)
==9996== by 0x4C83463: virDBusMessageDecode (virdbus.c:1141)
==9996== by 0x402C45: testMessageArrayRef (virdbustest.c:273)
==9996== by 0x404E71: virtTestRun (testutils.c:201)
==9996== by 0x401C2D: mymain (virdbustest.c:479)
==9996== by 0x4055ED: virtTestMain (testutils.c:789)
==9996== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==9996==
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently the DBus helper APIs require the values for an array
to be passed inline in the variadic argument list. This change
introduces support for passing arrays using a pointer to a plain
C array of the basic type. This is of particular benefit for
decoding messages when you don't know how many array elements
are being received.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='. One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit f1088c8 weakened a test, by not passing a value larger
than INT_MAX through an int slot. Make the fix in a different
way, using an explicit negative value. Suggested by Dan Berrange.
* tests/virdbustest.c (testMessageArray): Adjust previous fix.
(testMessageStruct): Use a negative number.
Signed-off-by: Eric Blake <eblake@redhat.com>
Compiling with gcc 4.1.2 (RHEL 5) on a 32-bit platform complains:
virdbustest.c: In function 'testMessageSimple':
virdbustest.c:61: warning: integer constant is too large for 'long' type
virdbustest.c:62: warning: integer constant is too large for 'long' type
virdbustest.c: In function 'testMessageArray':
virdbustest.c:183: warning: this decimal constant is unsigned only in ISO C90
virdbustest.c: In function 'testMessageStruct':
virdbustest.c:239: warning: integer constant is too large for 'long' type
virdbustest.c:240: warning: integer constant is too large for 'long' type
* tests/virdbustest.c (testMessageSiple, testMessageArray)
(testMessageStruct): Don't violate C89 constant constraints.
Signed-off-by: Eric Blake <eblake@redhat.com>
The way we were casting small (<32bit) integers was broken
on big endian hosts, causing stack smashing. This was detected
in the test suite either by test failures due to incorrect
results, or by libc/gcc abort'ing with its stack canary
triggered.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
since sizeof(int) != sizeof(long long) on 32bit archs.
This unbreaks virdbustest which otherwise fails like:
(gdb) bt
#0 __strlen_sse2_bsf () at ../sysdeps/i386/i686/multiarch/strlen-sse2-bsf.S:50
#1 0x405907d2 in ?? () from /lib/i386-linux-gnu/libdbus-1.so.3
#2 0x4057c140 in ?? () from /lib/i386-linux-gnu/libdbus-1.so.3
#3 0x4057e7ec in dbus_message_iter_append_basic () from /lib/i386-linux-gnu/libdbus-1.so.3
#4 0x400742ec in virDBusMessageIterEncode (args=0xbfd4b8f0 "k\321\004\b.", types=0x804d260 "",
rootiter=0xbfd4b844) at util/virdbus.c:560
#5 virDBusMessageEncodeArgs (msg=msg@entry=0x893c278, types=types@entry=0x804d25c "sais",
args=args@entry=0xbfd4b8d8 "r\320\004\b\003") at util/virdbus.c:921
#6 0x40075917 in virDBusMessageEncode (msg=0x893c278, types=0x804d25c "sais") at util/virdbus.c:959
#7 0x0804a4a1 in testMessageArray (args=0x0) at virdbustest.c:195
#8 0x0804c404 in virtTestRun (title=title@entry=0x804cfcb "Test message array ",
nloops=nloops@entry=1, body=body@entry=0x804a3f0 <testMessageArray>, data=data@entry=0x0)
at testutils.c:168
#9 0x08049346 in mymain () at virdbustest.c:384
#10 0x0804cb2e in virtTestMain (argc=argc@entry=1, argv=argv@entry=0xbfd4bb24,
func=func@entry=0x80492c0 <mymain>) at testutils.c:764
#11 0x080491af in main (argc=1, argv=0xbfd4bb24) at virdbustest.c:393
Doing DBus method calls using libdbus.so is tedious in the
extreme. systemd developers came up with a nice high level
API for DBus method calls (sd_bus_call_method). While
systemd doesn't use libdbus.so, their API design can easily
be ported to libdbus.so.
This patch thus introduces methods virDBusCallMethod &
virDBusMessageRead, which are based on the code used for
sd_bus_call_method and sd_bus_message_read. This code in
systemd is under the LGPLv2+, so we're license compatible.
This code is probably pretty unintelligible unless you are
familiar with the DBus type system. So I added some API
docs trying to explain how to use them, as well as test
cases to validate that I didn't screw up the adaptation
from the original systemd code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
