Like other distros, openSUSE Tumbleweed recently changed libexecdir from
/usr/lib to /usr/libexec. Add it as an allowed path for libxl-save-helper
and pygrub.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
When using [virtiofs], libvirtd must launch [virtiofsd] to provide
filesystem access on the host. When a guest is configured with
virtiofs, such as:
<filesystem type='mount' accessmode='passthrough'>
<driver type='virtiofs'/>
<source dir='/path'/>
<target dir='mount_tag'/>
</filesystem>
Attempting to start the guest fails with:
internal error: virtiofsd died unexpectedly
/var/log/libvirt/qemu/$name-fs0-virtiofsd.log contains (as a single
line, wrapped below):
libvirt: error : cannot execute binary /usr/lib/qemu/virtiofsd:
Permission denied
dmesg contains (as a single line, wrapped below):
audit: type=1400 audit(1598229295.959:73): apparmor="DENIED"
operation="exec" profile="libvirtd" name="/usr/lib/qemu/virtiofsd"
pid=46007 comm="rpc-worker" requested_mask="x" denied_mask="x"
fsuid=0 ouid=0
To avoid this, allow execution of virtiofsd from the libvirtd AppArmor
profile.
[virtiofs]: https://libvirt.org/kbase/virtiofs.html
[virtiofsd]: https://www.qemu.org/docs/master/interop/virtiofsd.html
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Declare it at the beginning of the function
instead of right before use.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
sc_spacing-check FAIL reporting a case of "Curly brackets around
single-line body:" in a recent commit.
Fixes: d9c21f4b "apparmor: allow adding permanent per guest rules"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
With qemu 5.0 and libvirt 6.6 there are new apparmor denials:
apparmor="DENIED" operation="umount" profile="libvirtd"
name="/run/libvirt/qemu/1-kvmguest-groovy-norm.dev/" comm="rpc-worker"
These are related to new issues around devmapper handling [1] and the
error path triggered by these issues now causes this new denial.
There are already related rules for mounting and it seems right to
allow also the related umount.
[1]: https://www.redhat.com/archives/libvir-list/2020-August/msg00236.html
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The design of apparmor in libvirt always had a way to define custom
per-guest rules as described in docs/drvqemu.html and [1].
A fix meant to clean the profiles after guest shutdown was a bit
overzealous and accidentially removed this important admin feature as
well.
Therefore reduce the --delete option of virt-aa-helper to only delete
the .files that would be re-generated in any case.
Users/Admins are always free to clean the profiles themselve if they
prefer a clean directory - they will be regenerated as needed. But
libvirt should never remove the base profile meant to allow per-guest
overrides and thereby break a documented feature.
[1]: https://gitlab.com/apparmor/apparmor/-/wikis/Libvirt#advanced-usage
Fixes: eba2225b "apparmor: delete profile on VM shutdown"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since [1] qemu can after upgrade fall back to pre-upgrade modules
to still be able to dynamically load qemu-module based features.
The paths for these modules are pre-defined by the code and should
be allowed to be mapped and loaded from which will allow packagers
avoiding the inability of late feature load [2] after package upgrades.
[1]: https://github.com/qemu/qemu/commit/bd83c861
[2]: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1847361
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange redhat com>
On some architectures (ppc, s390x, sparc, arm) qemu will read auxv
to detect hardware capabilities via qemu_getauxval.
Allow that access read-only for the entry owned by the current
qemu process.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Allow qemu to read @{PROC}/sys/vm/overcommit_memory.
This is read on guest start-up and (as read-only) not a
critical secret that has to stay hidden.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Jamie Strandboge <jamie@ubuntu.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When using xen through libxl in Debian/Ubuntu it needs to be able to
call pygrub.
This is placed in a versioned path like /usr/lib/xen-4.11/bin.
In theory the rule could be more strict by rendering the libexec_dir
setting pkg-config can derive from libbxen-dev. But that would make
particular libvirt/xen packages version-depend on each other. It seems
more reasonable to avoid these versioned dependencies and use a wildcard
rule instead as it is already in place for libxl-save-helper.
Note: This change was in Debian [1] and Ubuntu [2] for quite some time
already.
[1]: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931768
[2]: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1326003
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
/etc/pki/qemu is a pki path recommended by qemu tls docs [1]
and one that can cause issues with spice connections when missing.
Add the path to the allowed list of pki paths to fix the issue.
Note: this is active in Debian/Ubuntu [1] for quite a while already.
[1]: https://www.qemu.org/docs/master/system/tls.html
[2]: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=930100
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Remove the superfuous break, as there is a 'return' before it.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Historically, we've used security_context_t for variables passed
to libselinux APIs. But almost 7 years ago, libselinux developers
admitted in their API that in fact, it's just a 'char *' type
[1]. Ever since then the APIs accept 'char *' instead, but they
kept the old alias just for API stability. Well, not anymore [2].
1: 9eb9c93275
2: 7a124ca275
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All of the listed functions are available in libselinux version 2.2.
Our supported OSes start with version 2.5 so there is no need to check
it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The argument (if not NULL) points to the file the domain is
restoring from. On QEMU command line this used to be '-incoming
$path', but we've switched to passing FD ages ago and thus this
argument is used only in AppArmor (which loads the profile on
domain start). Anyway, the argument does not refer to stdin,
rename it to 'incomingPath' then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
These APIs are are basically
virSecuritySELinuxDomainSetPathLabelRO() and
virSecuritySELinuxDomainRestorePathLabel().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
These APIs were removed/renamed in v6.5.0-rc1~142 and v6.5.0-rc1~141
because they deemed unused. And if it wasn't for the RFE [1] things
would stay that way.
The RFE asks for us to not change DAC ownership on the file a domain is
restoring from. We have been doing that for ages (if not forever),
nevertheless it's annoying because if the restore file is on an NFS
remembering owner won't help - NFS doesn't support XATTRs yet. But more
importantly, there is no need for us to chown() the file because when
restoring the domain the file is opened and the FD is then passed to
QEMU. Therefore, we really need only to set SELinux and AppArmor.
This reverts bd22eec903.
This partially reverts 4ccbd207f2.
The difference to the original code is that secdrivers are now
not required to provide dummy implementation to avoid
virReportUnsupportedError(). The callback is run if it exists, if
it doesn't zero is returned without any error.
1: https://bugzilla.redhat.com/show_bug.cgi?id=1851016
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When locking files for metadata change, we open() them for R/W
access. The write access is needed because we want to acquire
exclusive (write) lock (to mutually exclude with other daemons
trying to modify XATTRs on the same file). Anyway, the open()
might fail if the file lives on a RO filesystem. Well, if that's
the case, ignore the error and continue with the next file on the
list. We won't change any seclabel on the file anyway - there is
nothing to remember then.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the light of recent commit of 9d83281382 fix the comment that
says directories can't be locked. Well, in general they can, but
not in our case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A TPM Proxy device can coexist with a regular TPM, but the
current domain definition supports only a single TPM device
in the 'tpm' pointer. This patch replaces this existing pointer
in the domain definition to an array of TPM devices.
All files that references the old pointer were adapted to
handle the new array instead. virDomainDefParseXML() TPM related
code was adapted to handle the parsing of an extra TPM device.
TPM validations after this new scenario will be updated in
the next patch.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This trivial rework is aimed to reduce the amount of line changes
made by the next patch, when 'def->tpm' will become a 'def->tpms'
array.
Instead of using a 'switch' where only the VIR_DOMAIN_TPM_TYPE_EMULATOR
label does something, use an 'if' clause instead.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The new name is virSecurityManagerDomainRestorePathLabel().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After previous commit this function is used no more.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Compilers are not very good at detecting this problem. Fixed by manual
inspection of compilation warnings after replacing 'VIR_FREE' with an
empty macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
For the case where -fw_cfg uses a file, we need to set the
seclabels on it to allow QEMU the access. While QEMU allows
writing into the file (if specified on the command line), so far
we are enabling reading only and thus we can use read only label
(in case of SELinux).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If built without attr support removing any image will trigger
qemuBlockRemoveImageMetadata (the one that emits the warning)
-> qemuSecurityMoveImageMetadata
-> virSecurityManagerMoveImageMetadata
-> virSecurityDACMoveImageMetadata
-> virSecurityDACMoveImageMetadataHelper
-> virProcessRunInFork (spawns subprocess)
-> virSecurityMoveRememberedLabel
In there due to !HAVE_LIBATTR virFileGetXAttrQuiet will return
ENOSYS and from there the chain will error out.
That is wrong and looks like:
libvirtd[6320]: internal error: child reported (status=125):
libvirtd[6320]: Unable to remove disk metadata on vm testguest from
/var/lib/uvtool/libvirt/images/testguest.qcow (disk target vda)
This change makes virSecurityDACMoveImageMetadataHelper and
virSecuritySELinuxMoveImageMetadataHelper accept that
error code gracefully and in that sense it is an extension of:
5214b2f1a3 "security: Don't skip label restore on file systems lacking XATTRs"
which does the same for other call chains into the virFile*XAttr functions.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The AppArmor secdriver does not use labels to grant access to
resources. Therefore, it doesn't use XATTRs and hence it lacks
implementation of .domainMoveImageMetadata callback. This leads
to a harmless but needless error message appearing in the logs:
virSecurityManagerMoveImageMetadata:476 : this function is not
supported by the connection driver: virSecurityManagerMoveImageMetadata
Closes: https://gitlab.com/libvirt/libvirt/-/issues/25
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Instead of the following pattern:
type ret;
...
ret = func();
return ret;
we can use:
return func()
directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The feature was never completed and is not really being pursued. Remove
the storage driver integration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Catch the individual usage not removed in previous commits.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As explained in the previous commit, we need to relabel the file
we are restoring the domain from. That is the FD that is passed
to QEMU. If the file is not under /dev then the file inside the
namespace is the very same as the one in the host. And regardless
of using transactions, the file will be relabeled. But, if the
file is under /dev then when using transactions only the copy
inside the namespace is relabeled and the one in the host is not.
But QEMU is reading from the one in the host, actually.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1772838
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This API allows drivers to separate out handling of @stdin_path
of virSecurityManagerSetAllLabel(). The thing is, the QEMU driver
uses transactions for virSecurityManagerSetAllLabel() which
relabels devices from inside of domain's namespace. This is what
we usually want. Except when resuming domain from a file. The
file is opened before any namespace is set up and the FD is
passed to QEMU to read the migration stream from. Because of
this, the file lives outside of the namespace and if it so
happens that the file is a block device (i.e. it lives under
/dev) its copy will be created in the namespace. But the FD that
is passed to QEMU points to the original living in the host and
not in the namespace. So relabeling the file inside the namespace
helps nothing.
But if we have a separate API for relabeling the restore file
then the QEMU driver can continue calling
virSecurityManagerSetAllLabel() with transactions enabled and
call this new API without transactions.
We already have an API for relabeling a single file
(virSecurityManagerDomainSetPathLabel()) but in case of SELinux
it uses @imagelabel (which allows RW access) and we want to use
@content_context (which allows RO access).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
With libpmem support compiled into qemu it will trigger the following
denials on every startup.
apparmor="DENIED" operation="open" name="/"
apparmor="DENIED" operation="open" name="/sys/bus/nd/devices/"
This is due to [1] that tries to auto-detect if the platform supports
auto flush for all region.
Once we know all the paths that are potentially needed if this feature
is really used we can add them conditionally in virt-aa-helper and labelling
calls in case </pmem> is enabled.
But until then the change here silences the denial warnings seen above.
[1]: https://github.com/pmem/pmdk/blob/master/src/libpmem2/auto_flush_linux.c#L131
Bug: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1871354
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
When a QEMU process dies in the middle of a hotplug, then we fail
to restore the seclabels on the device. The problem is that if
the thread doing hotplug locks the domain object first and thus
blocks the thread that wants to do qemuProcessStop(), the
seclabel cleanup code will see vm->pid still set and mount
namespace used and therefore try to enter the namespace
represented by the PID. But the PID is gone really and thus
entering will fail and no restore is done. What we can do is to
try enter the namespace (if requested to do so) but if entering
fails, fall back to no NS mode.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1814481
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Our decision whether to remember seclabel for a disk image
depends on a few factors. If the image is readonly or shared or
not the chain top the remembering is suppressed for the image.
However, the virSecurityManagerSetImageLabel() is too low level
to determine whether passed @src is chain top or not. Even though
the function has the @parent argument it does not necessarily
reflect the chain top - it only points to the top level image in
the chain we want to relabel and not to the topmost image of the
whole chain. And this can't be derived from the passed domain
definition reliably neither - in some cases (like snapshots or
block copy) the @src is added to the definition only after the
operation succeeded. Therefore, introduce a flag which callers
can use to help us with the decision.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'template' might be used uninitialized.
Use g_autofree for everything and remove all the custom labels.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The way that our file locking works is that we open() the file we
want to lock and then use fcntl(fd, F_SETLKW, ...) to lock it.
The problem is, we are doing all of these as root which doesn't
work if the file lives on root squashed NFS, because if it does
then the open() fails. The way to resolve this is to make this a
non fatal error and leave callers deal with this (i.e. disable
remembering) - implemented in the previous commit.
https://bugzilla.redhat.com/show_bug.cgi?id=1804672
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some cases where we want to remember the original owner
of a file but we fail to lock it for XATTR change (e.g. root
squashed NFS). If that is the case we error out and refuse to
start a domain. Well, we can do better if we disable remembering
for paths we haven't locked successfully.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far, in the lock state we are storing only the file
descriptors of the files we've locked. Therefore, when unlocking
them and something does wrong the only thing we can report is FD
number, which is not user friendly at all. But if we store paths
among with FDs we can do better error reporting.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit fb01e1a44d missed including virutil.h, causing the following
compilation error
../../src/security/virt-aa-helper.c:1055:43: error: implicit declaration of
function 'virHostGetDRMRenderNode' [-Werror=implicit-function-declaration]
1055 | char *defaultRenderNode = virHostGetDRMRenderNode();
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This module depends on domain_conf and is used directly by various
hypervisor drivers.
Move it to src/hypervisor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
