Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
This function does not make any sense now, that network driver is
(almost) dropped. I mean, previously, when threads were
serialized, this function was there to check, if no other network
with the same name or UUID exists. However, nowadays that threads
can run more in parallel, this function is useless, in fact it
gives misleading return values. Consider the following scenario.
Two threads, both trying to define networks with same name but
different UUID (e.g. because it was generated during XML parsing
phase, whatever). Lets assume that both threads are about to call
networkValidate() which immediately calls
virNetworkObjIsDuplicate().
T1: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T2: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T1: calls virNetworkAssignDef() and successfully places its
network into the virNetworkObjList.
T2: calls virNetworkAssignDef() and since network with the same
name exists, the network definition is replaced.
Okay, this is mainly because virNetworkAssignDef() does not check
whether name and UUID matches. Well, lets make it so! And drop
useless function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adds the port type definitions and methods that will be used to bind
interfaces to the Midonet virtual ports.
virtnetdevmidonet.c adds the way to bind and unbind the ports by
calling into the Midonet Host Agent control command line (installed
with the midolman package).
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
virDomainNetFindIdx no longer returns info whether device was not found,
or there was multiple matches. Additionally it already handle error
reporting. Introduce virDomainHasNet which does a simple task, without
implicit error reporting.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
A helper that never returns an error and treats bits out of bitmap range
as false.
Use it everywhere we use ignore_value on virBitmapGetBit, or loop over
the bitmap size.
https://bugzilla.redhat.com/show_bug.cgi?id=1135491
More or less a virtual copy of the existing virDomainVcpuPin{Add|Del} API's.
NB: The IOThreads implementation "reused" the virDomainVcpuPinDefPtr
since it provided everything necessary - an "id" and a "map" for each
thread id configured.
This is going to be needed later, when some functions already
have the virNetworkObjList object already locked and need to
lookup a object to work on. As an example of such function is
virNetworkAssignDef(). The other use case might be in
virNetworkObjListForEach() callback.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is practically copy of qemuDomObjEndAPI. The reason why is
it so widely available is to avoid code duplication, since the
function is going to be called from our bridge driver, test
driver and parallels driver too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far it's just a structure which happens to have 'Obj' in its
name, but otherwise it not related to virObject at all. No
reference counting, not virObjectLock(), nothing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Well, one day this will be self-locking object, but not today.
But lets prepare the code for that! Moreover,
virNetworkObjListFree() is no longer needed, so turn it into
virNetworkObjListDispose().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API will be used in the future to call passed callback over
each network object in the list. It's slightly different to its
virDomainObjListForEach counterpart, because virDomainObjList
uses a hash table to store domain object, while virNetworkObjList
uses an array.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user. Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED. Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.
Remove unnecessary function virCompareLimitUlong. The update of test
is to prevent the 0 to be miss-used as unlimited in future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The first one is to truncate the memory limit to
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED if the value is greater and the second
one is to decide whether the memory limit is set or not, unlimited means
that it's not set.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Implement virCommandPassFDGetFDIndex to determine the index a given
file descriptor will have when passed to the child process.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features
Here is an example of the feature XML definition:
<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
<path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
<parent>pci_0000_08_00_1</parent>
<capability type='net'>
<interface>eth4</interface>
<address>90:e2:ba:5e:a5:45</address>
<link speed='10000' state='up'/>
<feature name='rx'/>
<feature name='tx'/>
<feature name='sg'/>
<feature name='tso'/>
<feature name='gso'/>
<feature name='gro'/>
<feature name='rxvlan'/>
<feature name='txvlan'/>
<feature name='rxhash'/>
<capability type='80203'/>
</capability>
</device>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Since adding the support for scheduler policy settings in commit
8680ea97, there are two enums with the same information. That was
caused by rewriting the patch since first draft.
Find out thanks to clang, but there was no impact whatsoever.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1142631
This patch resolves a situation where the same "<target dev='$name'...>"
can be used for multiple disks in the domain.
While the $name is "mostly" advisory regarding the expected order that
the disk is added to the domain and not guaranteed to map to the device
name in the guest OS, it still should be unique enough such that other
domblk* type operations can be performed.
Without the patch, the domblklist will list the same Target twice:
$ virsh domblklist $dom
Target Source
------------------------------------------------
sda /var/lib/libvirt/images/file.qcow2
sda /var/lib/libvirt/images/file.img
Additionally, getting domblkstat, domblkerror, domblkinfo, and other block*
type calls will not be able to reference the second target.
Fortunately, hotplug disallows adding a "third" sda value:
$ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda
error: Failed to attach disk
error: operation failed: target sda already exists
$
BUT, it since 'sdb' doesn't exist one would get the following on the same
hotplug attempt, but changing to use 'sdb' instead of 'sda'
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb
error: Failed to attach disk
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device
$
Since we cannot fix this issue at parsing time, the best that can be done so
as to not "lose" a domain is to make the check prior to starting the guest
with the results as follows:
$ virsh start $dom
error: Failed to start domain $dom
error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img'
$
Running 'make check' found a few more instances in the tests where this
duplicated target dev value was being used. These also exhibited some
duplicated 'id=' values (negating the uniqueness argument of aliases) in
the corresponding .args file and of course the *xmlout version of a few
input XML files.
This API joins the following two lines:
char *s = virBufferContentAndReset(buf1);
virBufferAdd(buf2, s, -1);
into one:
virBufferAddBuffer(buf2, buf1);
With one exception: there's no re-indentation applied to @buf1.
The idea is, that in general both can have different indentation
(like the test I'm adding proves)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since our formatter now handles well if the config is allocated and not
filled we can safely always-allocate the NUMA config and remove the
ad-hoc allocation code.
This will help in later patches as the parser will be refactored to just
fill the data.
Move the existing virDomainDefNew to virDomainDefNewFull as it's setting
a few things in the conf and re-introduce virDomainDefNew as a function
without parameters for common use.
For a while now there are two places that gather information about NUMA
related guest configuration. While the XML can't be changed we can at
least store the data in one place in the definition.
Rename the numatune_conf.[ch] files to numa_conf as later patches will
move the rest of the definitions from the cpu definition to this one.
We do have a check for valid per-domain security model, however we still
do permit an invalid security model for a domain's device (those which
are specified with <source> element).
This patch introduces a new function virSecurityManagerCheckAllLabel
which compares user specified security model against currently
registered security drivers. That being said, it also permits 'none'
being specified as a device security model.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165485
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The enum converters are defined in the domain_conf.h (so
accessible widely across the code), but on the symbol layer, only
virDomainNetTypeToString was exposed. However, FromString variant
is going to be needed shortly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order for QEMU vCPU (and other) threads to run with RT scheduler,
libvirt needs to take care of that so QEMU doesn't have to run privileged.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178986
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This function uses sched_setscheduler() function so it works with
processes and threads as well (even threads not created by us, which is
what we'll need in the future).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The helpers will be useful when implementing hotplug and coldplug of
random number generator devices.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When adding devices to the definition it's useful to check whether the
devices don't reside on a conflicting address. This patch adds a helper
that iterates all device info and compares the addresses with the given
info.
Some code paths have special logic depending on the page size
reported by sysconf, which in turn affects the test results.
We must mock this so tests always have a consistent page size.
This helper eases iterating all key=value pairs stored in a JSON
object. Usually we pick only certain known keys from a JSON object, but
this will allow to walk complete objects and have the callback act on
those.
To be able to easily represent nodesets and other data stored in
virBitmaps in libvirt, this patch introduces a set of helpers that allow
to convert the bitmap to and from JSON value objects.
Extract the logic to determine which nodeset has to be used for a domain
from the formatting step so that it can be reused separately when the
nodeset is used in a different way.
This patch provides the utility functions needed to synchronize
the rxfilter changes made to a guest domain with the corresponding
macvtap devices on the host:
* Get/set PROMISC flag
* Get/set ALLMULTI, MULTICAST
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Do the allocation first, then add the actual device.
The second part should never fail. This is good
for live hotplug where we don't want to remove the device
on OOM after the monitor command succeeded.
The only change in behavior is that on failure, the
vmdef->consoles array is freed, not just the first console.
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A bunch of code is wrapped in #if WITH_LIBVIRTD in order to
enable the virStateDriver to be disabled when libvirtd is not
built. Disabling this code doesn't have any real functional
benefit beyond removing 1 pointer from the virConnectPtr struct,
while having a cost of many more conditionals.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDBusMethodCall method has a DBusError as one of its
parameters. If the caller wants to pass a non-NULL value
for this, it immediately makes the calling code require
DBus at build time. This has led to breakage of non-DBus
builds several times. It is desirable that only the virdbus.c
file should need WITH_DBUS conditionals, so we must ideally
remove the DBusError parameter from the method.
We can't simply raise a libvirt error, since the whole point
of this parameter is to give the callers a way to check if
the error is one they want to ignore, without having the logs
polluted with an error message. So, we add a virErrorPtr
parameter which the caller can then either ignore or raise
using the new virReportErrorObject method.
This new method is distinct from virSetError in that it
ensures the logging hooks are run.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Moving code for parsing and formatting network routes to
networkcommon_conf helps reusing those routes for domains. The route
definition has been hidden to help reducing the number of unnecessary
checks in the format function.
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
Add a default implementation of virNetDevSetIPv4Address using netlink
and libnl. This avoids requiring /usr/sbin/ip or /usr/sbin/ifconfig
external binaries.
Some of the nwfilter tests are now failing since --concurrent shows
up in the ebtables command. To avoid this, implement a function
preventing the probing for lock support in the eb/iptables tools
and use it in the tests.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Currently, when there is an API that's blocking with locked domain and
second API that's waiting in virDomainObjListFindByUUID() for the domain
lock (with the domain list locked) no other API can be executed on any
domain on the whole hypervisor because all would wait for the domain
list to be locked. This patch adds new optional approach to this in
which the domain is only ref'd (reference counter is incremented)
instead of being locked and is locked *after* the list itself is
unlocked. We might consider only ref'ing the domain in the future and
leaving locking on particular APIs, but that's no tonight's fairy tale.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
At the time that the network driver allocates a connection to a
network, the tap device that will be used hasn't yet been created -
that will be done later by qemu (or lxc or whoever) - but if the
network has macTableManager='libvirt', then when we do get around to
creating the tap device, we will need to add an entry for it to the
network bridge's fdb (forwarding database) *and* turn off learning and
unicast_flood for that tap device in the bridge's sysfs settings. This
means that qemu needs to know both the bridge name as well as the
setting of macTableManager, so we either need to create a new API to
retrieve that info, or just pass it back in the ActualNetDef that is
created during networkAllocateActualDevice. We choose the latter
method, since it's already done for the bridge device, and it has the
side effect of making the information available in domain status.
(NB: in the future, I think that the tap device should actually be
created by networkAllocateActualDevice(), as that will solve several
other problems, but that is a battle for another day, and this
information will still be useful outside the network driver)
The macTableManager attribute of a network's bridge subelement tells
libvirt how the bridge's MAC address table (used to determine the
egress port for packets) is managed. In the default mode, "kernel",
management is left to the kernel, which usually determines entries in
part by turning on promiscuous mode on all ports of the bridge,
flooding packets to all ports when the correct destination is unknown,
and adding/removing entries to the fdb as it sees incoming traffic
from particular MAC addresses. In "libvirt" mode, libvirt turns off
learning and flooding on all the bridge ports connected to guest
domain interfaces, and adds/removes entries according to the MAC
addresses in the domain interface configurations. A side effect of
turning off learning and unicast_flood on the ports of a bridge is
that (with Linux kernel 3.17 and newer), the kernel can automatically
turn off promiscuous mode on one or more of the bridge's ports
(usually only the one interface that is used to connect the bridge to
the physical network). The result is better performance (because
packets aren't being flooded to all ports, and can be dropped earlier
when they are of no interest) and slightly better security (a guest
can still send out packets with a spoofed source MAC address, but will
only receive traffic intended for the guest interface's configured MAC
address).
The attribute looks like this in the configuration:
<network>
<name>test</name>
<bridge name='br0' macTableManager='libvirt'/>
...
This patch only adds the config knob, documentation, and test
cases. The functionality behind this knob is added in later patches.
These two functions use netlink RTM_NEWNEIGH and RTM_DELNEIGH messages
to add and delete entries from a bridge's fdb. The bridge itself is
not referenced in the arguments to the functions, only the name of the
device that is attached to the bridge (since a device can only be
attached to one bridge at a time, and must be attached for this
function to make sense, the kernel easily infers which bridge's fdb is
being modified by looking at the device name/index).
https://bugzilla.redhat.com/show_bug.cgi?id=1159180
Move the API from the backend to storage_conf and rename it to
virStoragePoolGetVhbaSCSIHostParent. A future patch will need to
use this functionality from storage_conf
Get mounted filesystems list, which contains hardware info of disks and its
controllers, from QEMU guest agent 2.2+. Then, convert the hardware info
to corresponding device aliases for the disks.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.
To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.
To allow reuse this non-trivial parser code in the backing store parser
this part of the command line parser needs to be split out into a
separate funciton.
Ethernet interfaces in libvirt currently do not support bandwidth setting.
For example, following xml file for an interface will not apply these
settings to corresponding qdiscs.
<interface type="ethernet">
<mac address="02:36:1d:18:2a:e4"/>
<model type="virtio"/>
<script path=""/>
<target dev="tap361d182a-e4"/>
<bandwidth>
<inbound average="984" peak="1024" burst="64"/>
<outbound average="2000" peak="2048" burst="128"/>
</bandwidth>
</interface>
Signed-off-by: Anirban Chakraborty <abchak@juniper.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 01b4de2b9f abstracts virDomainParseMemory()
for use by other functions in domain_conf.c
Extend the same for use, for functions outside of this file.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a reaction to Michal's fix [1] for non-NUMA systems that also
splits out conf/ out of util/ because libvirt_util shouldn't require
libvirt_conf if it is the other way around. This particular use case
worked, but we're trying to avoid it as mentioned [2], many times.
The only functions from virnuma.c that needed numatune_conf were
virDomainNumatuneNodesetIsAvailable() and virNumaSetupMemoryPolicy().
The first one should be in numatune_conf as it works with
virDomainNumatune, the second one just needs nodeset and mode, both of
which can be passed without the need of numatune_conf.
Apart from fixing that, this patch also fixes recently added
code (between commits d2460f85^..5c8515620) that doesn't support
non-contiguous nodesets. It uses new function
virNumaNodesetIsAvailable(), which doesn't need a stub as it doesn't use
any libnuma functions, to check if every specified nodeset is available.
[1] https://www.redhat.com/archives/libvir-list/2014-November/msg00118.html
[2] http://www.redhat.com/archives/libvir-list/2011-June/msg01040.html
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As of 90286418 the function is introduced. However, it's missing
an entry in the libvirt_private.syms so it can't be mocked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There was no check for 'nodeset' attribute in numatune-related
elements. This patch adds validation that any nodeset specified does
not exceed maximum host node.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
This function is used to cleanup a pidfile doing whatever it takes, even
killing the owning process.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch provides the utility functions to needed to synchronize the
changes made to a guest domain network device's multicast filter
with the corresponding macvtap device's filter on the host:
* Get/add/remove multicast MAC addresses
* Get the macvtap device's RX filter list
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
The helper checks whether a string contains only whitespace or is NULL.
This will be helpful to skip cases where a user string is optional, but
may be provided empty with the same meaning.
Our qemu monitor code has a converter from key-value pairs to a json
value object. I want to re-use the code later and having it part of the
monitor command generator is inflexible. Split it out into a separate
helper.
