Commit Graph

708 Commits

Author SHA1 Message Date
Erik Skultety
93ab4da5f4 admin: Introduce virAdmServerSetThreadPoolParameters
Since threadpool increments the current number of threads according to current
load, i.e. how many jobs are waiting in the queue. The count however, is
constrained by max and min limits of workers. The logic of this new API works
like this:
    1) setting the minimum
        a) When the limit is increased, depending on the current number of
           threads, new threads are possibly spawned if the current number of
           threads is less than the new minimum limit
        b) Decreasing the minimum limit has no possible effect on the current
           number of threads
    2) setting the maximum
        a) Icreasing the maximum limit has no immediate effect on the current
           number of threads, it only allows the threadpool to spawn more
           threads when new jobs, that would otherwise end up queued, arrive.
        b) Decreasing the maximum limit may affect the current number of
           threads, if the current number of threads is less than the new
           maximum limit. Since there may be some ongoing time-consuming jobs
           that would effectively block this API from killing any threads.
           Therefore, this API is asynchronous with best-effort execution,
           i.e. the necessary number of workers will be terminated once they
           finish their previous job, unless other workers had already
           terminated, decreasing the limit to the requested value.
    3) setting priority workers
        - both increase and decrease in count of these workers have an
          immediate impact on the current number of workers, new ones will be
          spawned or some of them get terminated respectively.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-04-18 17:07:46 +02:00
Erik Skultety
caa16d3168 admin: Introduce virAdmServerGethreadPoolParameters
New API to retrieve current server workerpool specs. Since it uses typed
parameters, more specs to retrieve can be further included in the pool of
supported ones.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-04-18 17:07:36 +02:00
Erik Skultety
c618d48a38 admin: Prepare admin protocol for future worker related procedures
Before any getter or setter methods can be introduced, first specify a set of
public attributes/flags that these methods will be compatible with.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-04-18 17:07:27 +02:00
Erik Skultety
f5d9c5d00c libvirt-host: Move virTypedParam* to libvirt-common
Commits 0472cef6, 9afc115f, 8cd1d546 exported typed params handlers internally,
but a commit which would move the public definition from libvirt-host to
libvirt-common was missing.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-04-18 17:05:48 +02:00
Peter Krempa
fa95523b24 lib: document fields virConnectDomainEventDiskChangeReason 2016-04-18 16:31:28 +02:00
Dmitry Andreev
b028e9d7c2 qemu: migration: new migration param for persistent destination XML
Migration API allows to specify a destination domain configuration.
Offline domain has only inactive XML and it is replaced by configuration
specified using VIR_MIGRATE_PARAM_DEST_XML param. In case of live
migration VIR_MIGRATE_PARAM_DEST_XML param is applied for active XML.

This commit introduces the new VIR_MIGRATE_PARAM_PERSIST_XML param
that can be used within live migration to replace persistent/inactive
configuration.

Required for: https://bugzilla.redhat.com/show_bug.cgi?id=835300
2016-04-18 14:45:58 +02:00
Olga Krishtal
ee36975597 storage: add ploop volume type
Ploop image consists of directory with two files: ploop image itself,
called root.hds and DiskDescriptor.xml that contains information about
ploop device: https://openvz.org/Ploop/format.
Such volume are difficult to manipulate in terms of existing volume types
because they are neither a single files nor a directory.
This patch introduces new volume type - ploop. This volume type is used
by ploop volume's exclusively.

Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2016-04-15 17:27:32 +02:00
Erik Skultety
ab517a5ccb makefile: Move include/Makefile.am to include/libvirt/Makefile.am
The reason for this is to fix the automatic rebuild of libvirt-common.h.in.
All *.in files should be automatically rebuilt each time they're modified.
It works well for makefiles and pkgconfig files, since they do have a valid
dependency in the top-level Makefile. However, with libvirt-common.h.in
there is no dependency in the top-level Makefile and there's no need for it
either, so this rule

include/libvirt/libvirt-common.h: $(top_builddir)/config.status \
        $(top_srcdir)/include/libvirt/libvirt-common.h.in
    cd $(top_builddir) && $(SHELL) ./config.status $@

is never hit and should be moved to include/Makefile, but that's automake's
job. According to GNU automake docs:

"Files created by AC_CONFIG_FILES, be they
Automake Makefiles or not, are all removed by ‘make distclean’. Their inputs
are automatically distributed, unless they are the output of prior
AC_CONFIG_FILES commands. Finally, rebuild rules are generated in the Automake
Makefile existing in the subdirectory of the output file, if there is one, or
in the top-level Makefile otherwise."

Which means that if we want to have the rule for libvirt-common.h automatically
generated by automake, the include/Makefile.am needs to be moved into libvirt/
subdirectory and $SUBDIRS in the top-level Makefile need to be adjusted as
well. This patch moves Makefile.am from include/ to include/libvirt, adjusting
the prefixes accordingly as well as updates the top-level Makefile $SUBDIRS to
properly hint automake to generate all rules at proper places.

Best way to see the changes, use -M with 'git show'.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-04-15 09:44:04 +02:00
Nikolay Shirokovskiy
061e24285f qemu: migration: support setting compession parameters
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2016-04-14 14:57:41 +02:00
Nikolay Shirokovskiy
231b25db67 migration: qemu: add option to select compression methods
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2016-04-14 14:57:40 +02:00
Peter Krempa
5be120710e Add VIR_DOMAIN_EVENT_ID_DEVICE_REMOVAL_FAILED event
Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.
2016-04-13 13:26:29 +02:00
Michal Privoznik
3b6c818532 virDomain{Get,Set}PerfEvents: Add @flags argument
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-03-31 07:24:36 +02:00
Qiaowei Ren
0dd0165c03 qemu_driver: add support to perf event
This patch implement the internal driver API for perf event into
qemu driver.

Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-5-git-send-email-qiaowei.ren@intel.com
2016-03-29 13:13:05 +01:00
Qiaowei Ren
28b446292b perf: implement a set of util functions for perf event
This patch implement a set of interfaces for perf event. Based on
these interfaces, we can implement internal driver API for perf,
and get the results of perf conuter you care about.

Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-4-git-send-email-qiaowei.ren@intel.com
2016-03-29 13:13:05 +01:00
Qiaowei Ren
c803b0072b perf: add new public APIs for perf event
API agreed on in
https://www.redhat.com/archives/libvir-list/2015-October/msg00872.html

* include/libvirt/libvirt-domain.h (virDomainGetPerfEvents,
virDomainSetPerfEvents): New declarations.
* src/libvirt_public.syms: Export new symbols.
* src/driver-hypervisor.h (virDrvDomainGetPerfEvents,
virDrvDomainSetPerfEvents): New typedefs.
* src/libvirt-domain.c: Implement virDomainGetPerfEvents and
virDomainSetPerfEvents.

Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-2-git-send-email-qiaowei.ren@intel.com
2016-03-29 13:13:05 +01:00
Cristian Klein
1a1246ec7d Add public APIs for post-copy migration
To use post-copy one has to start the migration with
VIR_MIGRATE_POSTCOPY flag and, while migration is in progress, call
virDomainMigrateStartPostCopy() to switch from pre-copy to post-copy.

Signed-off-by: Cristian Klein <cristiklein@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-03-21 15:15:46 +01:00
Jiri Denemark
5a9cbc6265 Add event and state details for post-copy
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY and VIR_DOMAIN_PAUSED_POSTCOPY are
used on the source host once migration enters post-copy mode (which
means the domain gets paused on the source. After the destination host
takes over the execution of the domain, its virtual CPUs are resumed and
the domain enters VIR_DOMAIN_RUNNING_POSTCOPY state and
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event is emitted.

In case migration fails during post-copy mode and none of the hosts have
complete state of the domain, both domains will remain paused with
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED reason and an upper layer may decide
what to do.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-03-21 15:15:46 +01:00
Martin Kletzander
b9a3ce95ce admin: Add virAdmConnectLookupServer
It does not have a suffix ByName because there are no other means of
looking up the server and since the name is known, this should be the
preferred one.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-03-17 17:06:22 +01:00
Nikolay Shirokovskiy
f486cb5ea0 migration: add target peer disks port
Some hypervisors (namely qemu) can have a separate connecton for
non-shared disks migration of active domains. Currently we have
no means to control the port of such a connection. At the same
time we have options to control port of memory migration traffic
(thru migration uri) as well as interfaces that target server
is bound to for incoming migration (thru VIR_MIGRATE_PARAM_LISTEN_ADDRESS).
Let's add the option for setting disks port too.

Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2016-03-17 16:20:15 +01:00
Dmitry Andreev
8047d45704 Introduce new VIR_DOMAIN_EVENT_DEFINED_FROM_SNAPSHOT sub-event
VIR_DOMAIN_EVENT_DEFINED_FROM_SNAPSHOT event should be emitted
when domain configuration was changed on revert to snapshot.
2016-03-15 14:57:26 -04:00
Martin Kletzander
62be54861b virerror: Introduce new error type NO_SERVER
This serves the same purpose as VIR_ERR_NO_xxx where xxx is any object
that API can be called upon.  Only this particular one is used for
daemon's servers.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-03-11 12:58:41 +01:00
Jiri Denemark
f289300181 Introduce job completed event
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-03-08 16:26:00 +01:00
Alexander Burluka
55ecdae0fb Add global quota parameter necessary definitions
This parameter controls the maximum bandwidth to be used
within a period for whole domain.

Signed-off-by: Alexander Burluka <aburluka@virtuozzo.com>
2016-03-01 14:29:06 +00:00
Alexander Burluka
4d92d58f2c Add global period definitions
This parameter represents top level period cgroup
that limits whole domain enforcement period for a quota

Signed-off-by: Alexander Burluka <aburluka@virtuozzo.com>
2016-03-01 14:29:06 +00:00
John Ferlan
1d35f6ffe1 polkit: Adjust message when authentication agent isn't found
When there isn't a ssh -X type session running and a user has not
been added to the libvirt group, attempts to run 'virsh -c qemu:///system'
commands from an otherwise unprivileged user will fail with rather
generic or opaque error message:

    "error: authentication failed: no agent is available to authenticate"

This patch will adjust the error code and message to help reflect the
situation that the problem is the requested mechanism is UNAVAILABLE and
a slightly more descriptive error. The result on a failure then becomes:

    "error: authentication unavailable: no polkit agent available to
            authenticate action 'org.libvirt.unix.manage'"

A bit more history on this - at one time a failure generated the
following type message when running the 'pkcheck' as a subprocess:

"error: authentication failed: polkit\56retains_authorization_after_challenge=1
Authorization requires authentication but no agent is available."

but, a patch was generated to adjust the error message to help provide
more details about what failed. This was pushed as commit id '96a108c99'.
That patch prepended a "polkit: " to the output. It really didn't solve
the problem, but gave a hint.

After some time it was deemed using DBus API calls directly was a
better way to go (since pkcheck calls them anyway). So, commit id
'1b854c76' (more or less) copied the code from remoteDispatchAuthPolkit
and adjusted it. Then commit id 'c7542573' adjusted the remote.c
code to call the new API (virPolkitCheckAuth). Finally, commit id
'308c0c5a' altered the code to call DBus APIs directly. In doing
so, it reverted the failing error message to the generic message
that would have been received from DBus anyway.
2016-03-01 06:50:16 -05:00
Erik Skultety
1a07c2efb3 admin: Introduce adminDaemonConnectListServers API
This API is merely a convenience API, i.e. when managing clients connected to
daemon's servers, we should know (convenience) which server the specific client
is connected to. This implies a client-side representation of a server along
with a basic API to let the administrating client know what servers are actually
available on the daemon.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-02-17 12:46:34 +01:00
Erik Skultety
c50a834b80 admin: Introduce virAdmServer structure
This is the key structure of all management operations performed on the
daemon/clients. An admin client needs to be able to identify
another client (either admin or non-privileged client) to perform an
action on it. This identification includes a server the client is
connected to, thus a client-side representation of a server is needed.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-02-17 12:46:34 +01:00
Michal Privoznik
0d0e41a719 include: Handle case when builddir == srcdir
In my previous commit a70f3b1c77 I've tried to fix case
when building from VPATH and a file wasn't being installed.
However, my fix broke non-VPATH build.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-02-02 09:31:56 +01:00
Michal Privoznik
a70f3b1c77 includes: Install libvirt-common.h
The libvirt-common.h is build time generated file from .in.
Obviously, it's generated into builddir and not srcdir. Problem
is, the list of header files to install, virinc_HEADERS contains
only $(srcdir)/*.h and this misses libvirt-common.h. This problem
is pretty obvious when doing a VPATH build.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-30 11:55:45 +01:00
Wido den Hollander
63cdc92f04 storage: Add TRIM algorithm to storage volume API
This new algorithm adds support for wiping volumes using TRIM.

It does not overwrite all the data in a volume, but it tells the
backing storage pool/driver that all bytes in a volume can be
discarded.

It depends on the backing storage pool how this is handled.

A SCSI backend might send UNMAP commands to remove all data present
on a LUN.

A Ceph backend might use rbd_discard() to instruct the Ceph cluster
that all data on that RBD volume can be discarded.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2016-01-29 11:09:14 -05:00
Jim Fehlig
8c3c32f16a Xen: add XENXL to virErrorDomain enum
Add "Xen XL Config" to the virErrorDomain enum and use it in
src/xenconfig/xen_xl.c.
2016-01-21 09:31:39 -07:00
Jiri Denemark
0b50f4a025 Introduce migration iteration event
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-01-21 16:36:08 +01:00
Michal Privoznik
8c67ab6684 Expand $(wildcard) correctly
So after da176bf6b7 and friend we have switched to $(wildcard
some/path/*.xml) instead of enumerating the files explicitly.
This is nice, however it makes distcheck build from VPATH fail.
The reason is that it's is not obvious to what does the wildcard
refer to: srcdir or builddir?

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-12 17:16:33 +01:00
Cole Robinson
48b6ca8302 build: Kill include/libvirt/Makefile.am
Move all the logic to include/Makefile.am, simplify it with a wildcard,
then kill include/libvirt/Makefile.am
2016-01-11 11:45:14 -05:00
Jiri Denemark
eb084a733b qemu: Report more migration statistics
memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-01-08 18:18:58 +01:00
Erik Skultety
3245e1783c Revert "admin: Rename virAdmConnect to virAdmDaemon"
Commmit df8192aa introduced admin related rename and some minor
(caused by automated approach, aka sed) and some more severe isues along with
it. First reason to revert is the inconsistency with libvirt library.
Although we deal with the daemon directly rather than with a specific
hypervisor, we still do have a connection. That being said, contributors might
get under the impression that AdmDaemonNew would spawn/start a new daemon
(since it's admin API, why not...), or AdmDaemonClose would do the exact
opposite or they might expect DaemonIsAlive report overall status of the daemon
which definitely isn't the case.
The second reason to revert this patch is renaming virt-admin client. The
client tool does not necessarily have to reflect the names of the API's it's
using in his internals. An example would be 's/vshAdmConnect/vshAdmDaemon'
where noone can be certain of what the latter function really does. The former
is quite expressive about some connection magic it performs, but the latter does
not say anything, especially when vshAdmReconnect and vshAdmDisconnect were
left untouched.
2015-12-21 10:07:59 +01:00
John Ferlan
aeb1078ab5 storage: Add flags to allow building pool during create processing
https://bugzilla.redhat.com/show_bug.cgi?id=830056

Add flags handling to the virStoragePoolCreate and virStoragePoolCreateXML
API's which will allow the caller to provide the capability for the storage
pool create API's to also perform a pool build during creation rather than
requiring the additional buildPool step. This will allow transient pools
to be defined, built, and started.

The new flags are:

    * VIR_STORAGE_POOL_CREATE_WITH_BUILD
      Perform buildPool without any flags passed.

    * VIR_STORAGE_POOL_CREATE_WITH_BUILD_OVERWRITE
      Perform buildPool using VIR_STORAGE_POOL_BUILD_OVERWRITE flag.

    * VIR_STORAGE_POOL_CREATE_WITH_BUILD_NO_OVERWRITE
      Perform buildPool using VIR_STORAGE_POOL_BUILD_NO_OVERWRITE flag.

It is up to the backend to handle the processing of build flags. The
overwrite and no-overwrite flags are mutually exclusive.

NB:
This patch is loosely based upon code originally authored by Osier
Yang that were not reviewed and pushed, see:

https://www.redhat.com/archives/libvir-list/2012-July/msg01328.html
2015-12-17 11:56:18 -05:00
Martin Kletzander
df8192aaf4 admin: Rename virAdmConnect to virAdmDaemon
virAdmConnect was named after virConnect, but after some discussions,
most of the APIs called will be working with remote daemon and starting
them virAdmDaemon will make more sense.  Only possibly controversal name
is CloseCallback (de)registration, and connecting to the daemon (which
will still be Open/Close), but even this makes sense if one thinks about
the daemon being opened and closed, e.g. as file, etc.

This way all the APIs working with the daemon will start with
virAdmDaemon prefix, they will accept virAdmDaemonPtr as first parameter
and that will better suit with other namings as well (virDomain*,
virAdmServer*, etc.).

Because in virt-admin, the connection name does not refer to a struct
that would have a connect in its name, also adjust 'connname' in
clients.  And because it is not used anywhere in the vsh code, move it
from there into each client.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-12-01 11:44:48 +01:00
Martin Kletzander
98e2c39d39 include: Install libvirt-common.h
Otherwise nobody will be able to include libvirt.h.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-11-30 15:37:19 +01:00
Erik Skultety
a474371fc6 admin: Introduce virAdmConnectGetLibVersion
Introduce a new API to get libvirt version. It is worth noting, that
libvirt-admin and libvirt share the same version number. Unfortunately,
our existing API isn't generic enough to be used with virAdmConnectPtr
as well. Also this patch wires up this API to the virt-admin client
as a generic cmdVersion command.
2015-11-30 09:44:28 +01:00
Erik Skultety
6dd7e42d89 admin: Add support for connection close callbacks
As we need a client disconnect handler, we also need a mechanism to register
such handlers for a client. This patch introduced both the close callbacks and
also the client vshAdmCatchDisconnect handler to be registered with it. By
registering the handler we still need to make sure the client can react to
daemon's events like disconnect or keepalive, so asynchronous I/O event polling
is necessary to be enabled too.
2015-11-30 09:44:28 +01:00
Erik Skultety
dbecb87f94 admin: Add URI support and introduce virAdmGetDefaultURI
Since virt-admin should be able to connect to various admin servers
on hosted different daemons, we need to provide URI support to
libvirt-admin.
2015-11-30 09:44:28 +01:00
Erik Skultety
47a089f06c admin: Introduce virAdmConnectIsAlive
Since most of our APIs rely on an acive functional connection to a daemon and
we have such a mechanism in libvirt already, there's need to have such a way in
libvirt-admin as well. By introducing a new public API, this patch provides
support to check for an active connection.
2015-11-30 09:44:28 +01:00
Erik Skultety
b32f715d5b admin: introduce virAdmGetVersion
Unfortunately, client side version retrieval API virGetVersion uses
one-time initialization (due to the fact we might not have initialized the
library by calling connect prior to this) which is not completely compatible
with admin initialization. This API is rather simplistic and reimplementing
it for admin might be the preferred method of reusing it. Note that even though
the method will be reimplemented, the version number is still the same for both
the libvirt and libvirt-admin library.
2015-11-30 09:43:46 +01:00
Erik Skultety
a20b623748 libvirt: introduce libvirt/libvirt-common.h.in
As it turned out, we need to share some enums and declarations between
libvirt.h and libvirt-admin.h, but since our policy forbids direct includes of
libvirt*.h, there has to be some header exempt from this rule. This patch moves
the relevant part of code from libvirt.h.in to libvirt-common.h.in. Moreover,
since there is no need to have libvirt.h generated anymore, introduce a new
header libvirt.h which was previosly ignored from git and make the common
header ignored and generated instead.
2015-11-30 09:36:19 +01:00
Daniel P. Berrange
323a329b26 Import stripped down virtlockd code as basis of virtlogd
Copy the virtlockd codebase across to form the initial virlogd
code. Simple search & replace of s/lock/log/ and gut the remote
protocol & dispatcher. This gives us a daemon that starts up
and listens for connections, but does nothing with them.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-26 14:28:55 +00:00
Wido den Hollander
3c7590e0a4 rbd: Remove snapshots if the DELETE_WITH_SNAPSHOTS flag has been provided
When a RBD volume has snapshots it can not be removed.

This patch introduces a new flag to force volume removal,
VIR_STORAGE_VOL_DELETE_WITH_SNAPSHOTS.

With this flag any existing snapshots will be removed prior to
removing the volume.

No existing mechanism in libvirt allowed us to pass such information,
so that's why a new flag was introduced.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2015-10-27 16:12:12 -04:00
Tomas Meszaros
9877d8406c Introduce new VIR_DOMAIN_EVENT_DEFINED_RENAMED event
This should be emitted whenever a domain is renamed.

Signed-off-by: Tomas Meszaros <exo@tty.sk>
2015-08-14 10:50:20 +02:00
Tomas Meszaros
9f7a559a6d Introduce virDomainRename API
Also, among with this new API new ACL that restricts rename
capability is invented too.

Signed-off-by: Tomas Meszaros <exo@tty.sk>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-08-14 10:50:20 +02:00
Michal Privoznik
55d0e859fd Introduce VIR_DOMAIN_BANDWIDTH_IN_FLOOR
This macro represents the single missing field we don't expose
yet within QoS: inbound.floor.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-08-11 16:10:32 +02:00