The limits are different with cgroups v1 and v2 but our XML
documentation and virsh manpage mentioned only cgroups v1 limits without
explicitly saying it only applies to cgroups v1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This attribute was added to support setting the --interface option for
passt, but in a post-push/pre-9.0-release review, danpb pointed out
that it would be better to use the existing <source dev='xxx'/>
attribute to set --interface rather than creating a new attribute (in
the wrong place). So we remove backend/upstream, and change the passt
commandline creation to grab the name for --interface from source/dev.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This implements XML config to represent a subset of the features
supported by 'passt' (https://passt.top), which is an alternative
backend for emulated network devices that requires no elevated
privileges (similar to slirp, but "better").
Along with setting the backend to use passt (via <backend
type='passt'/> when the interface type='user'), we also support
passt's --log-file and --interface options (via the <backend>
subelement logFile and upstream attributes) and its --tcp-ports and
--udp-ports options (which selectively forward incoming connections to
the host on to the guest) via the new <portForward> subelement of
<interface>. Here is an example of the config for a network interface
that uses passt to connect:
<interface type='user'>
<mac address='52:54:00:a8:33:fc'/>
<ip address='192.168.221.122' family='ipv4'/>
<model type='virtio'/>
<backend type='passt' logFile='/tmp/xyzzy.log' upstream='eth0'/>
<portForward address='10.0.0.1' proto='tcp' dev='eth0'>
<range start='2022' to='22'/>
<range start='5000' end='5099' to='1000'/>
<range start='5010' end='5029' exclude='yes'/>
</portForward>
<portForward proto='udp'>
<range start='10101'/>
</portForward>
</interface>
In this case:
* the guest will be offered address 192.168.221.122 for its interface
via DHCP
* the passt process will write all log messages to /tmp/xyzzy.log
* routes to the outside for the guest will be derived from the
addresses and routes associated with the host interface "eth0".
* incoming tcp port 2022 to the host will be forwarded to port 22
on the guest.
* incoming tcp ports 5000-5099 (with the exception of ports 5010-5029)
to the host will be forwarded to port 1000-1099 on the guest.
* incoming udp packets on port 10101 will be forwarded (unchanged) to
the guest.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'fdgroup' will allow users to specify a passed FD (via the
'virDomainFDAssociate()' API) to be used instead of opening a path.
This is useful in cases when e.g. the file is not accessible from inside
a container.
Since this uses the same disk type as when we open files via names this
patch also introduces a hypervisor feature which the hypervisor asserts
that code paths are ready for this possibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we have qemuMonitorGetCPUModelExpansion() aware of
Hyper-V Enlightenments, we can start querying it. Two conditions
need to be met:
1) KVM is in use,
2) Arch is either x86 or arm.
It may look like modifying the first call to
qemuMonitorGetCPUModelExpansion() inside of
virQEMUCapsProbeQMPHostCPU() would be sufficient but it is not.
We really need to ask QEMU for full expansion and the first call
does not guarantee that.
For the test data, I've just copied whatever
'query-cpu-model-expansion' returned earlier, therefore there are
no hv-* props. But that's okay - the full expansion is not stored
in cache (and thus not formatted in
tests/qemucapabilitiesdata/caps_*.replies files either). This is
purely runtime thing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some network FSs (ceph, CIFS) that propagate XATTRs
properly and thus SELinux labels too. In such case using dynamic
seclabels would get in the way of migration as new seclabel is
assigned to the domain on the destination and thus two processes
with different labels (the source and the destination QEMU/helper
process) would try to access the same file. One of them is
necessarily going to be denied access.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
List the various options so that the most likely ones come
first.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Users are likely more interested in the main deployment
scenarios than in the detailed list of every existing RPM
package. Reorder sections accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Since the takeover of the bird site, the bulk of tech people who want
a more friendly and inclusive media site have jumped over to Mastodon.
With its decentralized nature, there's no one replacement that captures
everything, but the fosstodon.org site is a topic relevant choice.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the formatcaps.rst we give an example output of capabilities.
Well, there are couple of issues with it:
1) We show <features/> nested under /capabilities/host/cpu.
There's no such element and never was.
2) The ordering of elements is corrupted.
3) There is plenty of elements missing.
Fix these by showing an actual output of 'virsh capabilities' as
obtained on my machine.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't refuse override definitions for device which doesn't exist and
the same way don't care about 'remove' being used on a property which is
not actually formatted by libvirt. Drop the paragraph claiming the
contrary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an example of invoking qemu with '-device TYPE,?' to query
properties of a given type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'number' override type didn't exist in the final version so change
it to the corresponding 'signed' and 'unsigned'.
Additionally clarify which override type is used for a corresponding
qemu type and also that we use base 10 numbers so users will need to
convert the numbers if needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit c43718ef67 I've added a disclaimer that the new stats which
are fetched from qemu and passed directly to the user are not guaranteed
by libvirt. I didn't notice that per-vcpu hypervisor specific stats are
also snuck into the VIR_DOMAIN_STATS_VCPU group along with other
pre-existing stats we do guarantee.
Extend the disclaimer for VIR_DOMAIN_STATS_VCPU too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The setting is needed for the windows driver to work properly and doesn't have negative effects on other usage.
Signed-off-by: Lukas Ke nicelukas@hotmail.com
Just adds a tool to the applications list. This tool helps managing
multiple VMs at once using the python binding.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cédric Bosdonnat <cbosdonnat@suse.com>
There is so far one case where STRCASEPREFIX(a, b) && a +
strlen(b) combo is used (in virVMXConfigScanResultsCollector()),
but there will be more. Do what we do usually: introduce a macro.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
We document use of our STR*() macros, but somehow missed
STRCASEPREFIX() and STRSKIP().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
We require a space after a comma and even document this in our
coding style document. However, our own rule is broken in the
very same document when listing string comparison macros.
Separate macro arguments properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Despite efforts to make the virt-qemu-sev-validate tool friendly, it is
a certainty that almost everyone who tries it will hit false negative
results, getting a failure despite the VM being trustworthy.
Diagnosing these problems is no easy matter, especially for those not
familiar with SEV/SEV-ES in general. This extra docs text attempts to
set out a checklist of items to look at to identify what went wrong.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Expand the SEV guest kbase guide with information about how to configure
a SEV/SEV-ES guest when attestation is required, and mention the use of
virt-qemu-sev-validate as a way to confirm it.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is possible to build OVMF for SEV with an embedded Grub that can
fetch LUKS disk secrets. This adds support for injecting secrets in
the required format.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When validating a SEV-ES guest, we need to know the CPU count and VMSA
state. We can get the CPU count directly from libvirt's guest info. The
VMSA state can be constructed automatically if we query the CPU SKU from
host capabilities XML. Neither of these is secure, however, so this
behaviour is restricted.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The VMSA files contain the expected CPU register state for the VM. Their
content varies based on a few pieces of the stack
- AMD CPU architectural initial state
- KVM hypervisor VM CPU initialization
- QEMU userspace VM CPU initialization
- AMD CPU SKU (family/model/stepping)
The first three pieces of information we can obtain through code
inspection. The last piece of information we can take on the command
line. This allows a user to validate a SEV-ES guest merely by providing
the CPU SKU information, using --cpu-family, --cpu-model,
--cpu-stepping. This avoids the need to obtain or construct VMSA files
directly.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the SEV-ES policy the VMSA state of each vCPU must be included in
the measured data. The VMSA state can be generated using the 'sevctl'
tool, by telling it a QEMU VMSA is required, and passing the hypevisor's
CPU SKU (family, model, stepping).
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When connected to libvirt we can validate that the guest configuration
has the kernel hashes property enabled, otherwise including the kernel
GUID table in our expected measurements is not likely to match the
actual measurement.
When running locally we can also automatically detect the kernel/initrd
paths, along with the cmdline string from the XML.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When doing direct kernel boot we need to include the kernel, initrd and
cmdline in the measurement.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Accept information about a connection to libvirt and a guest on the
command line. Talk to libvirt to obtain the running guest state and
automatically detect as much configuration as possible.
It will refuse to use a libvirt connection that is thought to be local
to the current machine, as running this tool on the hypervisor itself is
not considered secure. This can be overridden using the --insecure flag.
When querying the guest, it will also analyse the XML configuration in
an attempt to detect any options that are liable to be mistakes. For
example the NVRAM being measured should not have a persistent varstore.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virt-qemu-sev-validate program will compare a reported SEV/SEV-ES
domain launch measurement, to a computed launch measurement. This
determines whether the domain has been tampered with during launch.
This initial implementation requires all inputs to be provided
explicitly, and as such can run completely offline, without any
connection to libvirt.
The tool is placed in the libvirt-client-qemu sub-RPM since it is
specific to the QEMU driver.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Extend hypervisor capabilities to include sgx feature. When available,
the hypervisor supports launching an VM with SGX on Intel platfrom.
The SGX feature tag privides additional details like section size and
sgx1 or sgx2.
Signed-off-by: Haibin Huang <haibin.huang@intel.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu-6.2 introduced support for the hv-avic enlightenment which allows
to use Hyper-V SynIC with hardware APICv/AVIC enabled.
Implement the libvirt support for it.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/402
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The index page only really makes sense for the top level directory. The
specific index files are unreferenced since last commit. Drop them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix the main links in docs.rst main page to go to the full docs rather
than prompting one more click to the index page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The LXC module has no exported 'Types' but the XSL template which
generates the 'libvirt-libvirt-lxc.html' page would try to format it
anyways. This would result in an empty non-pair version of the '<pre>'
tag to be used in the page, which didn't render well with modern
browsers for some reason. All following sections would become children
of the non-pair <pre>.
Fix the XSL template to not generate empty 'Types' or 'Functions'
sections similarly to how we do with 'Macros'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The template is unused since commit 9092c3d491
Remove also the up|right|left|home.png files which were only used by
code generated by the unused template.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow users to request validation of the storage volume XML. Add new
flag and virsh support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The node device APIs which get XML from the user don't yet support XML
validation flags. Introduce virNodeDeviceCreateXMLFlags and
virNodeDeviceDefineXMLFlags with the appropriate flags and add virsh
support for the new flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The original patches adding the functionality neglected to add any form
of documentation for the stats fields returned for this group.
The stats are directly converted from qemu's 'query-stats(-schema)' QMP
command without any further interpretation. The 'query-stats-schema' has
the following disclaimer:
Note: runtime-collected statistics and their names fall outside QEMU's usual
deprecation policies. QEMU will try to keep the set of available data
stable, together with their names, but will not guarantee stability
at all costs; the same is true of providers that source statistics
externally, e.g. from Linux. For example, if the same value is being
tracked with different names on different architectures or by different
providers, one of them might be renamed. A statistic might go away if
an algorithm is changed or some code is removed; changing a default
might cause previously useful statistics to always report 0. Such
changes, however, are expected to be rare.
Since libvirt is not doing any form of conversion of the stats we can't
meaningfully document any of the returned fields. At the same time we
can't even meaningfully provide any form of API stability for the field
names.
Modify the documentation for the 'VIR_DOMAIN_STATS_VM' group both in the
API docs and in the virsh man page to reflect that and disclaim any form
of stability guarantees we provide normally.
Fixes: 8c9e3dae14
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There is part of our man page that describes how to switch to the
traditional (non-socket) activation but it might still happens sometimes that
there is an extra --timeout option specified for the daemon.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We document that a commit fixing an issue tracked in GitLab
should put just "Fixes: #NNN" into its commit message. But when
viewing git log, having full URL which is directly clickable is
more developer friendly and GitLab is capable of handling both.
Therefore, document that users should put full URL, just like
when fixing a bug tracked in other sites.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
