Commit Graph

11 Commits

Author SHA1 Message Date
Laine Stump
a950dd2a31 Change virtual network XML parsing/formatting to support IPv6
This commit adds support for IPv6 parsing and formatting to the
virtual network XML parser, including moving around data definitions
to allow for multiple <ip> elements on a single network, but only
changes the consumers of this API to accommodate for the changes in
API/structure, not to add any actual IPv6 functionality. That will
come in a later patch - this patch attempts to maintain the same final
functionality in both drivers that use the network XML parser - vbox
and "bridge" (the Linux bridge-based driver used by the qemu
hypervisor driver).

* src/libvirt_private.syms: Add new private API functions.
* src/conf/network_conf.[ch]: Change C data structure and
  parsing/formatting.
* src/network/bridge_driver.c: Update to use new parser/formatter.
* src/vbox/vbox_tmpl.c: update to use new parser/formatter
* docs/schemas/network.rng: changes to the schema -
  * there can now be more than one <ip> element.
  * ip address is now an ip-addr (ipv4 or ipv6) rather than ipv4-addr
  * new optional "prefix" attribute that can be used in place of "netmask"
  * new optional "family" attribute - "ipv4" or "ipv6"
    (will default to ipv4)
  * define data types for the above
* tests/networkxml2xml(in|out)/nat-network.xml: add multiple <ip> elements
  (including IPv6) to a single network definition to verify they are being
  correctly parsed and formatted.
2010-12-23 15:53:55 -05:00
Laine Stump
008abeeeb9 make the <dhcp> element optional in network.rng
In practice this has always been optional, but the RNG has shown it as
mandatory, and since all the examples for make check had it, it was
never noticed. One of the existing test cases has been changed to
check for this.

I also noticed that the dhcp/host/ip was still defined as <text/>,
but should really be <ref name='ipv4-addr'/>
2010-12-23 15:53:44 -05:00
Laine Stump
7665440956 Do a better job of validating IP and MAC addresses in network.rng
IP addresses and MAC addresses had been defined in the RNG simply as
<text/> meaning that, according to the RNG, any string could go in
there. Of course the C parsing code does a much better job of
validating, but we may as well have this describing the contents
accurately (even though it's currently only used during "make check").
2010-11-12 02:12:49 -05:00
Laine Stump
5983f2d297 re-indent network.rng following structural change
This commit is whitespace changes only, do avoid obscuring actual code
changes.
2010-11-12 02:12:29 -05:00
Laine Stump
3d10d3489b Put network.rng contents inside <grammar> for uniformity with other RNGs
All the other RNG files in libvirt are enclosed within <grammar>. This
commit makes the syntactical changes necessary to make network.rng fit
that pattern. (This is the first step in adding some data type
definitions to network.rng for more exact validation of IP and MAC
addresses).

Formatting changes (indentation) will be done in a subsequent commit,
so that actual changes to the code won't be obscured by whitespace.
2010-11-12 02:12:19 -05:00
Jim Meyering
aa7847d3ad maint: convert leading TABs in *.rng files to equivalent spaces
* docs/schemas/capability.rng: Likewise.
* docs/schemas/network.rng: Likewise.
* docs/schemas/nodedev.rng: Likewise.
* docs/schemas/storagepool.rng: Likewise.
* docs/schemas/storagevol.rng: Likewise.
Use these commands:
t=$'\t'
git ls-files | grep '\.rng$' | xargs grep -lE "^ *$t" \
  | xargs perl -MText::Tabs -ni -le \
    '$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'
2010-03-01 20:19:20 +01:00
Paolo Bonzini
936565c701 Add support for an external TFTP boot server
This patch adds an optional attribute to the <bootp> tag, that
allows to specify a TFTP server address other than the address of
the DHCP server itself.

This can be used to forward the BOOTP settings of the host down to the
guest.  This is something that configurations such as Xen's default
network achieve naturally, but must be done manually for NAT.

* docs/formatnetwork.html.in: Document new attribute.
* docs/schemas/network.rng: Add it to schema.
* src/conf/network_conf.h: Add it to struct.
* src/conf/network_conf.c: Add it to parser and pretty printer.
* src/network/bridge_driver.c: Put it in the dnsmasq command line.
* tests/networkxml2xmlin/netboot-proxy-network.xml
  tests/networkxml2xmlout/netboot-proxy-network.xml
  tests/networkxml2xmltest.c: add new tests
2009-10-28 15:57:49 +01:00
Cole Robinson
4027461865 schema: Update network schema.
Make things a bit more readable, and properly handle forward mode 'route'.
2009-10-16 10:52:10 -04:00
Paolo Bonzini
738ee810b4 network: add 'bootp' and 'tftp' config
Currently, libvirtd will start a dnsmasq process for the virtual
network, but (aside from killing the dnsmasq process and replacing it),
there's no way to define tftp boot options.

This change introduces the appropriate tags to the dhcp configuration:

 <network>
   <name>default</name>
   <bridge name="virbr%d" />
   <forward/>
   <ip address="192.168.122.1" netmask="255.255.255.0">
     <tftp root="/var/lib/tftproot" />
     <dhcp>
       <range start="192.168.122.2" end="192.168.122.254" />
       <bootp file="pxeboot.img"/>
     </dhcp>
   </ip>
 </network>

When the attributes are present, these are passed to the
arguments to dnsmasq:

 dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img
               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^
                      from <tftp />                     from <bootp />

At present, only local tftp servers are supported (ie, dnsmasq runs as
the tftp server), but we could improve this in future by adding a
server= attribute.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

2009-09-21  Paolo Bonzini  <pbonzini@redhat.com>
            Jeremy Kerr  <jk@ozlabs.org>

	* docs/formatnetwork.html.in: Document new tags.
	* docs/formatnetwork.html: Regenerate.
	* docs/schemas/network.rng: Update.
	* src/network_conf.c (virNetworkDefFree): Free new fields.
	(virNetworkDHCPRangeDefParseXML): Parse <bootp>.
	(virNetworkIPParseXML): New, parsing <dhcp> and <tftp>.
	(virNetworkDefParseXML): Use virNetworkIPParseXML instead of
	virNetworkDHCPRangeDefParseXML.
	(virNetworkDefFormat): Pretty print new fields.
	* src/network_conf.h (struct _virNetworkDef): Add netboot fields.
	* src/network_driver.c (networkBuildDnsmasqArgv): Add
	TFTP and BOOTP arguments.

	* tests/Makefile.am (EXTRA_DIST): Add networkschemadata.
	* tests/networkschematest: Look in networkschemadata.
	* tests/networkschemadata/netboot-network.xml: New.
2009-09-23 09:47:10 +02:00
Daniel Veillard
1e4434d652 Fix some missing parts in network code and schemas
* docs/schemas/network.rng: fix the network schemas to match
  new accepted elements, patch by Satoru SATOH
* src/network_conf.c: fix network driver to save the domain name
  in XML if present, patch by Satoru SATOH
* AUTHORS: adding Satoru SATOH
Daniel
2009-07-02 14:02:18 +00:00
Daniel P. Berrange
2c22a68ce2 Added complete set of RNG schemas for all XML formats 2009-01-27 15:29:53 +00:00