I noticed when writing the backend functions for virNetworkUpdate that
I was repeating the same sequence of memmove, VIR_REALLOC, nXXX-- (and
messed up the args to memmove at least once), and had seen the same
sequence in a lot of other places, so I decided to write a few
utility functions/macros - see the .h file for full documentation.
The intent is to reduce the number of lines of code, but more
importantly to eliminate the need to check the element size and
element count arithmetic every time we need to do this (I *always*
make at least one mistake.)
VIR_INSERT_ELEMENT: insert one element at an arbitrary index within an
array of objects. The size of each object is determined
automatically by the macro using sizeof(*array). The new element's
contents are copied into the inserted space, then the original copy
of contents are 0'ed out (if everything else was
successful). Compile-time assignment and size compatibility between
the array and the new element is guaranteed (see explanation below
[*])
VIR_INSERT_ELEMENT_COPY: identical to VIR_INSERT_ELEMENT, except that
the original contents of newelem are not cleared to 0 (i.e. a copy
is made).
VIR_APPEND_ELEMENT: This is just a special case of VIR_INSERT_ELEMENT
that "inserts" one past the current last element.
VIR_APPEND_ELEMENT_COPY: identical to VIR_APPEND_ELEMENT, except that
the original contents of newelem are not cleared to 0 (i.e. a copy
is made).
VIR_DELETE_ELEMENT: delete one element at an arbitrary index within an
array of objects. It's assumed that the element being deleted is
already saved elsewhere (or cleared, if that's what is appropriate).
All five of these macros have an _INPLACE variant, which skips the
memory re-allocation of the array, assuming that the caller has
already done it (when inserting) or will do it later (when deleting).
Note that VIR_DELETE_ELEMENT* can return a failure, but only if an
invalid index is given (index + amount to delete is > current array
size), so in most cases you can safely ignore the return (that's why
the helper function virDeleteElementsN isn't declared with
ATTRIBUTE_RETURN_CHECK). A warning is logged if this ever happens,
since it is surely a coding error.
[*] One initial problem with the INSERT and APPEND macros was that,
due to both the array pointer and newelem pointer being cast to void*
when passing to virInsertElementsN(), any chance of type-checking was
lost. If we were going to move in newelem with a memmove anyway, we
would be no worse off for this. However, most current open-coded
insert/append operations use direct struct assignment to move the new
element into place (or just populate the new element directly) - thus
use of the new macros would open a possibility for new usage errors
that didn't exist before (e.g. accidentally sending &newelemptr rather
than newelemptr - I actually did this quite a lot in my test
conversions of existing code).
But thanks to Eric Blake's clever thinking, I was able to modify the
INSERT and APPEND macros so that they *do* check for both assignment
and size compatibility of *ptr (an element in the array) and newelem
(the element being copied into the new position of the array). This is
done via clever use of the C89-guaranteed fact that the sizeof()
operator must have *no* side effects (so an assignment inside sizeof()
is checked for validity, but not actually evaluated), and the fact
that virInsertElementsN has a "# of new elements" argument that we
want to always be 1.
QEMU supports setting vendor and product strings for disk since
1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch
exposes it with new XML elements <vendor> and <product> of disk
device.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=767057
It was possible to define a network with <forward mode='bridge'> that
had both a bridge device and a forward device defined. These two are
mutually exclusive by definition (if you are using a bridge device,
then this is a host bridge, and if you have a forward dev defined,
this is using macvtap). It was also possible to put <ip>, <dns>, and
<domain> elements in this definition, although those aren't supported
by the current driver (although it's conceivable that some other
driver might support that).
The items that are invalid by definition, are now checked in the XML
parser (since they will definitely *always* be wrong), and the others
are checked in networkValidate() in the network driver (since, as
mentioned, it's possible that some other network driver, or even this
one, could some day support setting those).
Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we can't (currently) rely on the ability to provide blanket
support for all possible network changes by calling the toplevel
netdev hostside disconnect/connect functions (due to qemu only
supporting a lockstep between initialization of host side and guest
side of devices), in order to support live change of an interface's
nwfilter we need to make a special purpose function to only call the
nwfilter teardown and setup functions if the filter for an interface
(or its parameters) changes. The pattern is nearly identical to that
used to change the bridge that an interface is connected to.
This patch was inspired by a request from Guido Winkelmann
<guido@sagersystems.de>, who tested an earlier version.
To detect if an interface's nwfilter has changed, we need to also
compare the filterparams, which is a hashtable of virNWFilterVarValue.
virHashEqual can do this nicely, but requires a pointer to a function
that will compare two of the items being stored in the hashes.
This introduces a few new APIs for dealing with strings.
One to split a char * into a char **, another to join a
char ** into a char *, and finally one to free a char **
There is a simple test suite to validate the edge cases
too. No more need to use the horrible strtok_r() API,
or hand-written code for splitting strings.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To be able todo controlled shutdown/reboot of containers an
API to talk to init via /dev/initctl is required. Fortunately
this is quite straightforward to implement, and is supported
by both sysvinit and systemd. Upstart support for /dev/initctl
is unclear.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This new function returns true if the given address is in the range of
any "private" or "local" networks as defined in RFC1918 (IPv4) or
RFC3484/RFC4193 (IPv6), otherwise they return false.
These ranges are:
192.168.0.0/16
172.16.0.0/16
10.0.0.0/24
FC00::/7
FEC0::/10
In order to optionally take advantage of new features in dnsmasq when
the host's version of dnsmasq supports them, but still be able to run
on hosts that don't support the new features, we need to be able to
detect the version of dnsmasq running on the host, and possibly
determine from the help output what options are in this dnsmasq.
This patch implements a greatly simplified version of the capabilities
code we already have for qemu. A dnsmasqCaps device can be created and
populated either from running a program on disk, reading a file with
the concatenated output of "dnsmasq --version; dnsmasq --help", or
examining a buffer in memory that contains the concatenated output of
those two commands. Simple functions to retrieve capabilities flags,
the version number, and the path of the binary are also included.
bridge_driver.c creates a single dnsmasqCaps object at driver startup,
and disposes of it at driver shutdown. Any time it must be used, the
dnsmasqCapsRefresh method is called - it checks the mtime of the
binary, and re-runs the checks if the binary has changed.
networkxml2argvtest.c creates 2 "artificial" dnsmasqCaps objects at
startup - one "restricted" (doesn't support --bind-dynamic) and one
"full" (does support --bind-dynamic). Some of the test cases use one
and some the other, to make sure both code pathes are tested.
because libvirt_lxc's cgroup mountpoint is what it shown
in /proc/self/cgroup.
we can get container's cgroup through virCgroupNew("/", &group),
add interface virCgroupGetAppRoot to help container to
get it's cgroup.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
virCgroupGetMemSwapUsage is used to get container's swap usage,
with this interface,we can get swap usage in fuse filesystem.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
This patch introduces the RNG schema and updates necessary data strucutures
to allow various hypervisors to make use of Gluster protocol as one of the
supported network disk backend. Next patch will add support to make use of
this feature in Qemu since it now supports Gluster protocol as one of the
network based storage backend.
Two new optional attributes for <host> element are introduced - 'transport'
and 'socket'. Valid transport values are tcp, unix or rdma. If none specified,
tcp is assumed. If transport is unix, socket specifies path to unix socket.
This patch allows users to specify disks on gluster backends like this:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='gluster' name='Volume1/image'>
<host name='example.org' port='6000' transport='tcp'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='gluster' name='Volume2/image'>
<host transport='unix' socket='/path/to/sock'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Currently the LXC driver logs audit messages when a container
is started or stopped. These audit messages, however, contain
the PID of the libvirt_lxc supervisor process. To enable
sysadmins to correlate with audit messages generated by
processes /inside/ the container, we need to include the
container init process PID.
We can't do this in the main 'start' audit message, since
the init PID is not available at that point. Instead we output
a completely new audit record, that lists both PIDs.
type=VIRT_CONTROL msg=audit(1353433750.071:363): pid=20180 uid=0 auid=501 ses=3 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 msg='virt=lxc op=init vm="busy" uuid=dda7b947-0846-1759-2873-0f375df7d7eb vm-pid=20371 init-pid=20372 exe="/home/berrange/src/virt/libvirt/daemon/.libs/lt-libvirtd" hostname=? addr=? terminal=pts/6 res=success'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Upcoming patches for revert-and-clone branching of snapshots need
to be able to copy a domain definition; make this step reusable.
* src/conf/domain_conf.h (virDomainDefCopy): New prototype.
* src/conf/domain_conf.c (virDomainObjCopyPersistentDef): Split...
(virDomainDefCopy): ...into new function.
(virDomainObjSetDefTransient): Use it.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Use it.
This patch adds a helper to determine if snapshots are external and uses
the helper to fix detection of those in snapshot deletion code.
Snapshots are external if they have an external memory image or if the
disk locations are external. As mixed snapshots are forbidden for now
we need to check just one disk to know.
Currently, we use iohelper when saving/restoring a domain.
However, if there's some kind of error (like I/O) it is not
propagated to libvirt. Since it is not qemu who is doing
the actual write() it will not get error. The iohelper does.
Therefore we should check for iohelper errors as it makes
libvirt more user friendly.
In the XML warning, we print a virsh command line that can be used to
edit that XML. This patch prints UUIDs if the entity name contains
special characters (like shell metacharacters, or "--" that would break
parsing of the XML comment). If the entity doesn't have a UUID, just
print the virsh command that can be used to edit it.
For now, disk migration via block copy job is not implemented in
libvirt. But when we do implement it, we have to deal with the
fact that qemu does not yet provide an easy way to re-start a qemu
process with mirroring still intact. Paolo has proposed an idea
for a persistent dirty bitmap that might make this possible, but
until that design is complete, it's hard to say what changes
libvirt would need. Even something like 'virDomainSave' becomes
hairy, if you realize the implications that 'virDomainRestore'
would be stuck with recreating the same mirror layout.
But if we step back and look at the bigger picture, we realize that
the initial client of live storage migration via disk mirroring is
oVirt, which always uses transient domains, and that if a transient
domain is destroyed while a mirror exists, oVirt can easily restart
the storage migration by creating a new domain that visits just the
source storage, with no loss in data.
We can make life a lot easier by being cowards for now, forbidding
certain operations on a domain. This patch guarantees that we
never get in a state where we would have to restart a domain with
a mirroring block copy, by preventing saves, snapshots, migration,
hot unplug of a disk in use, and conversion to a persistent domain
(thankfully, it is still relatively easy to 'virsh undefine' a
running domain to temporarily make it transient, run tests on
'virsh blockcopy', then 'virsh define' to restore the persistence).
Later, if the qemu design is enhanced, we can relax our code.
The change to qemudDomainDefine looks a bit odd for undoing an
assignment, rather than probing up front to avoid the assignment,
but this is because of how virDomainAssignDef combines both a
lookup and assignment into a single function call.
* src/conf/domain_conf.h (virDomainHasDiskMirror): New prototype.
* src/conf/domain_conf.c (virDomainHasDiskMirror): New function.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainBlockJobImpl, qemudDomainDefine): Prevent dangerous
actions while block copy is already in action.
* src/qemu/qemu_hotplug.c (qemuDomainDetachDiskDevice): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=862515
which describes inconsistencies in dealing with duplicate mac
addresses on network devices in a domain.
(at any rate, it resolves *almost* everything, and prints out an
informative error message for the one problem that isn't solved, but
has a workaround.)
A synopsis of the problems:
1) you can't do a persistent attach-interface of a device with a mac
address that matches an existing device.
2) you *can* do a live attach-interface of such a device.
3) you *can* directly edit a domain and put in two devices with
matching mac addresses.
4) When running virsh detach-device (live or config), only MAC address
is checked when matching the device to remove, so the first device
with the desired mac address will be removed. This isn't always the
one that's wanted.
5) when running virsh detach-interface (live or config), the only two
items that can be specified to match against are mac address and model
type (virtio, etc) - if multiple netdevs match both of those
attributes, it again just finds the first one added and assumes that
is the only match.
Since it is completely valid to have multiple network devices with the
same MAC address (although it can cause problems in many cases, there
*are* valid use cases), what is needed is:
1) remove the restriction that prohibits doing a persistent add of a
netdev with a duplicate mac address.
2) enhance the backend of virDomainDetachDeviceFlags to check for
something that *is* guaranteed unique (but still work with just mac
address, as long as it yields only a single results.
This patch does three things:
1) removes the check for duplicate mac address during a persistent
netdev attach.
2) unifies the searching for both live and config detach of netdevices
in the subordinate functions of qemuDomainModifyDeviceFlags() to use the
new function virDomainNetFindIdx (which matches mac address and PCI
address if available, checking for duplicates if only mac address was
specified). This function returns -2 if multiple matches are found,
allowing the callers to print out an appropriate message.
Steps 1 & 2 are enough to fully fix the problem when using virsh
attach-device and detach-device (which require an XML description of
the device rather than a bunch of commandline args)
3) modifies the virsh detach-interface command to check for multiple
matches of mac address and show an error message suggesting use of the
detach-device command in cases where there are multiple matching mac
addresses.
Later we should decide how we want to input a PCI address on the virsh
commandline, and enhance detach-interface to take a --address option,
eliminating the need to use detach-device
* src/conf/domain_conf.c
* src/conf/domain_conf.h
* src/libvirt_private.syms
* added new virDomainNetFindIdx function
* removed now unused virDomainNetIndexByMac and
virDomainNetRemoveByMac
* src/qemu/qemu_driver.c
* remove check for duplicate max from qemuDomainAttachDeviceConfig
* use virDomainNetFindIdx/virDomainNetRemove instead
of virDomainNetRemoveByMac in qemuDomainDetachDeviceConfig
* use virDomainNetFindIdx instead of virDomainIndexByMac
in qemuDomainUpdateDeviceConfig
* src/qemu/qemu_hotplug.c
* use virDomainNetFindIdx instead of a homespun loop in
qemuDomainDetachNetDevice.
* tools/virsh-domain.c: modified detach-interface command as described
above
It turns out that the cpuacct results properly account for offline
cpus, and always returns results for every possible cpu, not just
the online ones. So there is no need to check the map of online
cpus in the first place, merely only a need to know the maximum
possible cpu. Meanwhile, virNodeGetCPUBitmap had a subtle change
from returning the maximum id to instead returning the width of
the bitmap (one larger than the maximum id) in commit 2f4c5338,
which made this code encounter some off-by-one logic leading to
bad error messages when a cpu was offline:
$ virsh cpu-stats dom
error: Failed to virDomainGetCPUStats()
error: An error occurred, but the cause is unknown
Cleaning this up unraveled a chain of other unused variables.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Drop
pointless check for cpumap changes, and use correct number of
cpus. Simplify signature.
(qemuDomainGetCPUStats): Adjust caller.
* src/nodeinfo.h (nodeGetCPUCount): New prototype.
(nodeGetCPUBitmap): Drop unused parameter.
* src/nodeinfo.c (nodeGetCPUBitmap): Likewise.
(nodeGetCPUMap): Adjust caller.
(nodeGetCPUCount): New function.
* src/libvirt_private.syms (nodeinfo.h): Export it.
Added an implemention of virNodeGetCPUMap to nodeinfo.c,
(nodeGetCPUMap) which can be used by all drivers for a Linux
hypervisor host.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Callers should not need to know what the name of the file to
be read in the Linux-specific version of nodeGetCPUmap;
furthermore, qemu cares about online cpus, not present cpus,
when determining which cpus to skip.
While at it, I fixed the fact that we were computing the maximum
online cpu id by doing a slow iteration, when what we really want
to know is the max available cpu.
* src/nodeinfo.h (nodeGetCPUmap): Rename...
(nodeGetCPUBitmap): ...and simplify signature.
* src/nodeinfo.c (linuxParseCPUmax): New function.
(linuxParseCPUmap): Simplify and alter signature.
(nodeGetCPUBitmap): Change implementation.
* src/libvirt_private.syms (nodeinfo.h): Reflect rename.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Update
caller.
Sometimes it's handy to know how many bits are set.
* src/util/bitmap.h (virBitmapCountBits): New prototype.
(virBitmapNextSetBit): Use correct type.
* src/util/bitmap.c (virBitmapNextSetBit): Likewise.
(virBitmapSetAll): Maintain invariant of clear tail bits.
(virBitmapCountBits): New function.
* src/libvirt_private.syms (bitmap.h): Export it.
* tests/virbitmaptest.c (test2): Test it.
Add utility functions for Open vSwitch to both save
per-port data before a live migration, and restore the
per-port data after a live migration.
Signed-off-by: Kyle Mestery <kmestery@cisco.com>
https://bugzilla.redhat.com/show_bug.cgi?id=866364
pointed out a crash due to virNetworkObjAssignDef free'ing
network->newDef without NULLing it afterward. A fix for this is in
upstream commit b7e9202401. While the
NULLing of newDef was a legitimate fix, newDef should have already
been empty (NULL) anyway (as indicated in the comment that was deleted
by that commit).
The reason that newDef had a non-NULL value (i.e. the root cause) was
that networkStartNetwork() had failed after populating
network->newDef, but then neglected to free/NULL newDef in the
cleanup.
(A bit of background here: network->newDef should contain the
persistent config of a network when a network is active (and of course
only when it is persisten), and NULL at all other times. There is also
a network->def which should contain the persistent definition of the
network when it is inactive, and the current live state at all other
times. The idea is that you can make changes to network->newDef which
will take effect the next time the network is restarted, but won't
mess with the current state of the network (virDomainObj has a similar
pair of virDomainDefs that behave in the same fashion). Personally I
think there should be a network->live and network->config, and the
location of the persistent config should *always* be in
network->config, but that's for a later cleanup).
Since I love things to be symmetric, I created a new function called
virNetworkObjUnsetDefTransient(), which reverses the effects of
virNetworkObjSetDefTransient(). I don't really like the name of the
new function, but then I also didn't really like the name of the old
one either (it's just named that way to match a similar function in
the domain conf code).
In order to temporarily label files read/write during a commit
operation, we need to crawl the backing chain and find the absolute
file name that needs labeling in the first place, as well as the
name of the file that owns the backing file.
* src/util/storage_file.c (virStorageFileChainLookup): New
function.
* src/util/storage_file.h: Declare it.
* src/libvirt_private.syms (storage_file.h): Export it.
Hypervisors are starting to support HyperV Enlightenment features that
improve behavior of guests running Microsoft Windows operating systems.
This patch adds support for the "relaxed" feature that improves timer
behavior and also establishes a framework to add these features in
future.
Add two new APIs virNetServerNewPostExecRestart and
virNetServerPreExecRestart which allow a virNetServerPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of all registered services
and clients
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virNetServerClientNewPostExecRestart and
virNetServerClientPreExecRestart which allow a virNetServerClientPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of the connected socket associated
with the client
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virNetServerServiceNewPostExecRestart and
virNetServerServicePreExecRestart which allow a virNetServerServicePtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of the listening sockets associated
with the service
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virNetSocketNewPostExecRestart and
virNetSocketPreExecRestart which allow a virNetSocketPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
As well as saving the state in JSON format, the second
method will disable the O_CLOEXEC flag so that the open
file descriptors are preserved across the process re-exec()
Since it is not possible to serialize SASL or TLS encryption
state, an error will be raised if attempting to perform
serialization on non-raw sockets
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virLockSpaceNewPostExecRestart and
virLockSpacePreExecRestart which allow a virLockSpacePtr
object to be created from a JSON object and saved to a
JSON object, for the purposes of re-exec'ing a process.
As well as saving the state in JSON format, the second
method will disable the O_CLOEXEC flag so that the open
file descriptors are preserved across the process re-exec()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previously introduced virFile{Lock,Unlock} APIs provide a
way to acquire/release fcntl() locks on individual files. For
unknown reason though, the POSIX spec says that fcntl() locks
are released when *any* file handle referring to the same path
is closed. In the following sequence
threadA: fd1 = open("foo")
threadB: fd2 = open("foo")
threadA: virFileLock(fd1)
threadB: virFileLock(fd2)
threadB: close(fd2)
you'd expect threadA to come out holding a lock on 'foo', and
indeed it does hold a lock for a very short time. Unfortunately
when threadB does close(fd2) this releases the lock associated
with fd1. For the current libvirt use case for virFileLock -
pidfiles - this doesn't matter since the lock is acquired
at startup while single threaded an never released until
exit.
To provide a more generally useful API though, it is necessary
to introduce a slightly higher level abstraction, which is to
be referred to as a "lockspace". This is to be provided by
a virLockSpacePtr object in src/util/virlockspace.{c,h}. The
core idea is that the lockspace keeps track of what files are
already open+locked. This means that when a 2nd thread comes
along and tries to acquire a lock, it doesn't end up opening
and closing a new FD. The lockspace just checks the current
list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY.
NB, the API as it stands is designed on the basis that the
files being locked are not being otherwise opened and used
by the application code. One approach to using this API is to
acquire locks based on a hash of the filepath.
eg to lock /var/lib/libvirt/images/foo.img the application
might do
virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks");
lockname = md5sum("/var/lib/libvirt/images/foo.img");
virLockSpaceAcquireLock(lockspace, lockname);
NB, in this example, the caller should ensure that the path
is canonicalized before calculating the checksum.
It is also possible to do locks directly on resources by
using a NULL lockspace directory and then using the file
path as the lock name eg
virLockSpacePtr lockspace = virLockSpaceNew(NULL);
virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img");
This is only safe to do though if no other part of the process
will be opening the files. This will be the case when this
code is used inside the soon-to-be-reposted virlockd daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
BZ:https://bugzilla.redhat.com/show_bug.cgi?id=851981
When using macvtap, a character device gets first created by
kernel with name /dev/tapN, its selinux context is:
system_u:object_r:device_t:s0
Shortly, when udev gets notification when new file is created
in /dev, it will then jump in and relabel this file back to the
expected default context:
system_u:object_r:tun_tap_device_t:s0
There is a time gap happened.
Sometimes, it will have migration failed, AVC error message:
type=AVC msg=audit(1349858424.233:42507): avc: denied { read write } for
pid=19926 comm="qemu-kvm" path="/dev/tap33" dev=devtmpfs ino=131524
scontext=unconfined_u:system_r:svirt_t:s0:c598,c908
tcontext=system_u:object_r:device_t:s0 tclass=chr_file
This patch will label the tapfd device before qemu process starts:
system_u:object_r:tun_tap_device_t:MCS(MCS from seclabel->label)
This patch adds support for SUSPEND_DISK event; both lifecycle and
separated. The support is added for QEMU, machines are changed to
PMSUSPENDED, but as QEMU sends SHUTDOWN afterwards, the state changes
to shut-off. This and much more needs to be done in order for libvirt
to work with transient devices, wake-ups etc. This patch is not
aiming for that functionality.
The onlined vcpu pinning policy should inherit def->cpuset if
it's not specified explicitly, and the affinity should be set
in this case. Oppositely, the offlined vcpu pinning policy should
be free()'ed.
Add support for logging to the systemd journal, using its
simple client library. The benefit over syslog is that it
accepts structured log data, so the journald can store
individual items like code file/line/func separately from
the string message. Tools which require structured log
data can then query the journal to extract exactly what
they desire without resorting to string parsing
While systemd provides a simple client library for logging,
it is more convenient for libvirt to directly write its
own client code. This lets us build up the iovec's on
the stack, avoiding the need to alloc memory when writing
log messages.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the cgroups APIs we have a virCgroupKillPainfully function
which does the loop sending SIGTERM, then SIGKILL and waiting
for the process to exit. There is similar functionality for
simple processes in qemuProcessKill, but it is tangled with
the QEMU code. Untangle it to provide a virProcessKillPainfuly
function
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Continue consolidation of process functions by moving some
helpers out of command.{c,h} into virprocess.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are a number of process related functions spread
across multiple files. Start to consolidate them by
creating a virprocess.{c,h} file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCommand prefix was inappropriate because the API
does not use any virCommandPtr object instance. This
API closely related to waitpid/exit, so use virProcess
as the prefix
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
