Introduced back in 2012 by QEMU commit:
commit 783e9b4826b95e53e33c42db6b4bd7d89bdff147
introduce a new monitor command 'dump-guest-memory' to dump guest's memory
Released in QEMU 1.2.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Historically, the tpm->data.emulator.activePcrBanks member was an
unsigned int but since it was used as a bitmap it was converted
to virBitmap type instead. Now, the virBitmap is allocated inside
of virDomainTPMDefParseXML() but only if <activePcrBanks/> was
found with at last one child element. Otherwise it stays NULL.
Fast forward to starting a domain with TPM 2.0 and no
<activePcrBanks/> configured. Eventually,
qemuTPMEmulatorBuildCommand() is called, which subsequently calls
qemuTPMEmulatorReconfigure() and finally
qemuTPMPcrBankBitmapToStr() passing the NULL value. Before
rewrite to virBitmap this function would return NULL for empty
activePcrBanks but now, well, now it crashes.
Fixes: 52c7c31c80
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch uses qemuMonitorQueryStats to query "halt_poll_success_ns"
and "halt_poll_fail_ns" for every vCPU. The respective values for each
vCPU are then added together.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Related: https://gitlab.com/libvirt/libvirt/-/issues/276
This patch adds an API for the "query-stats" QMP command.
The query returns a JSON containing the statistics based on the target,
which can either be vCPU or VM, and the providers. The API deserializes
the query result into an array of GHashMaps, which can later be used to
extract all the query statistics. GHashMaps are used to avoid traversing
the entire array to find the statistics you are looking for. This would
be a singleton array if the target is a VM since the returned JSON is
also a singleton array in that case.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This represents an interface connected to a VMWare Distributed Switch,
previously obscured as a dummy interface.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced back in 2010 by QEMU commit:
commit a697a334b3c4d3250e6420f5d38550ea10eb5319
virtio-net: Introduce a new bottom half packet TX
Released in QEMU 0.14.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
All callers pass 'true'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The blockdev-backup QMP command was introduced in qemu-2.3.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The event was introduced in qemu-2.3
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Set it same way we set throttling for other disks in
qemuProcessSetupDiskThrottling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While we assume that -blockdev is supported the validator had also some
corner cases for -drive. Since we use '-drive' exclusively for the
extremely rarely used SD cards it makes no sense to have the validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability is checked when we validate the source in the first
place. Also it won't make sense any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we know we have a modern qemu at hand which can interpret the
dotted syntax, we can format the -drive needed for SD cards via the
common infrastructure we have for all blockdev stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the generic frontend-less -drive code from qemuBuildDriveStr by
assuming that we support only blockdev-enabled qemus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SD card disks can't be detached, so it makes no sense to special case
them in the unplug code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All media are changed in blockdev-instantiated cdroms now, remove the
old code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The operation makes no sense regardless of the way how we specify disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With new qemu versions we setup floppies via -device.
Some legacy output tests were not modernized yet so the expected output
needs to be adjusted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'persistjob' is always true and 'top' and 'base' are always NULL.
Adjust the functions to drop the arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The top level API is unused so it can be removed but internally the JSON
version is called by other monitor commands which extract information
from the reply.
Thus qemuMonitorJSONQueryNamedBlockNodes is unexported and moved
appropriately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
