The QOM type for machine types is the machine type name
followed by the -machine suffix. Since this is always the
case, we can make virQEMUCapsMachineProps more readable
and avoid repetition by not including the suffix there and
adding it automatically while processing the data; moreover,
when later on we will start figuring out which specific
versioned machine type to probe at runtime instead of doing
so statically, adding the suffix dynamically will become
necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We're going to need information about available machine types
when probing machine type properties soon, and that means we
have to change the order we call QMP commands.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Up until now we've probed machine type properties, along with
properties for other types, in virQEMUCapsProbeQMPDevices(), but
soon we're going to need some logic that is specific to machine
types and as such wouldn't quite fit into that function.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit c257352797 introduced a logic bug where we will never save the
inactive XML after a blockjob as the variable which was determining
whether to do so is cleared right before. Thus even if we correctly
modify the inactive state it will be rolled back when libvirtd is
restarted.
Reported-by: Thomas Stein <hello@himbee.re>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It has been exported by systemd commit
commit a571c23e954cb88cdd5faa28593b19bd7c340130
libudev: export udev_monitor_set_receive_buffer_size()
released in v183.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is the version of systemd RHEL/CentOS 7 uses:
https://repology.org/project/systemd/versions
Oldest tracked openSUSE distros have 228,
Ubuntu 16.04 has 229 and Gentoo's alternative eudev
has bumped the version to 219 back in 2015.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When a vhost scsi device is hotplugged virt-aa-helper is called to
add the respective path.
For example the config:
<hostdev mode='subsystem' type='scsi_host' managed='no'>
<source protocol='vhost' wwpn='naa.50014059de6fba4f'/>
</hostdev>
Will call it to add:
/sys/kernel/config/target/vhost//naa.50014059de6fba4f
But in general /sys paths are filtered in virt-aa-helper.c:valid_path
To allow the path used for vhost-scsi we need to add it to the list of
known and accepted overrides.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1829223
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function was deprecated in udev 219 and all the supported OSes
don't have older version of udev or systemd.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
CPU features that always were a no-op in qemu got removed there.
We no more specify them as that would trigger errors and fail to start
qemu. This test ensures that those features really are not rendered into
qemu command line.
Without the related fix this test will trigger and fail like:
In 'tests/qemuxml2argvdata/cpu-no-removed-features.args':
Offset 371
Expect [ ]
Actual [,-osxsave,-ospke ]
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Qemu dropped cpu features for osxsave and ospke [1][2].
The reason for the instant removal is that those features were never
configurable as discussed in [3].
Fortunately the use cases adding those flags in the past are rare, but
they exist. One that I identified are e.g. older virt-install when used
with --cpu=host-model and there always could be the case of a user
adding it to the guest xml.
This triggers an issue like:
qemu-system-x86_64: can't apply global Broadwell-noTSX-x86_64-
cpu.osxsave=on: Property '.osxsave' not found
Ensure that this does no more break spawning newer qemu versions by
not rendering those features into the qemu command line.
Fixes: https://bugs.launchpad.net/fedora/+source/qemu/+bug/1825195
Resolves: https://bugzilla.redhat.com/1644848
[1]: https://git.qemu.org/?p=qemu.git;a=commit;h=f1a2352
[2]: https://git.qemu.org/?p=qemu.git;a=commit;h=9ccb978
[3]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg561877.html
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091
The bit is set when microcode provides the mechanism to invoke a flush
of various exploitable CPU buffers by invoking the VERW instruction.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This function gets snapshot XML (provided by used) as an
argument. It parses it into a local variable @def and then sets
some more members (e.g. it creates a copy of live domain XML).
Then it proceeds to checking if snapshot XML is valid (e.g. it
contains as many disks as currently in the domain). If this fails
then the control jumps to endjob label and subsequently return
from the function. This is where AUTOFREE function for @def is
ran. Well, because the code says to run plain VIR_FREE() we leak
some memory because @def is actually an object and therefore
it should have been declared as AUTOUNREF.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
A double free may occur in testCompareXMLToArgvFiles() when @def
is freed right after virStoragePoolObjNew() failed and the second
time at cleanup label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The idea of virCommand* APIs is that a possible error that
occurred while constructing cmd line is kept in virCommand
struct. If that's the case all subsequent calls to virCommand*()
are NO-OPs or they return an error. Well,
virCommandPassFDGetFDIndex() is not honoring that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If virStoragePoolObjNew() fails to create new volume object list
then virObjectUnref() is called and since refcounter is 1 then
virStoragePoolObjDispose() is called which in turn calls
virStoragePoolObjClearVols() which in turn dereferences
obj->volumes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The qsort element is a pointer of virResctrlMonitorStats, and
the comparing function's arguments have a type of pointer of
virResctrlMonitorStatsPtr.
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainGetDiskErrors() API copies disk targets into @disks
array that we allocate. But we forgot to free it:
==140828== 16 bytes in 4 blocks are definitely lost in loss record 41 of 242
==140828== at 0x4C2F08F: malloc (vg_replace_malloc.c:299)
==140828== by 0x8C406D9: strdup (in /lib64/libc-2.28.so)
==140828== by 0x5377DD3: virStrdup (virstring.c:966)
==140828== by 0x54C112F: testDomainGetDiskErrors (test_driver.c:3068)
==140828== by 0x55C863D: virDomainGetDiskErrors (libvirt-domain.c:10988)
==140828== by 0x15D1FA: cmdDomBlkError (virsh-domain-monitor.c:1215)
==140828== by 0x17F1A8: vshCommandRun (vsh.c:1335)
==140828== by 0x13489E: main (virsh.c:920)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Return the number of disks present in the configuration of the test
domain when called with @errors as NULL and @maxerrors as 0.
Otherwise report an error for every second disk, assigning available
error codes in a cyclic order.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Our build system doesn't currently install the various
example programs provided along libvirt; however, both the
upstream .spec file and the Debian packaging go out of
their way to make sure these useful demos are included in
the respective documentation packages.
Moreover, doing so without help from the upstream build
system is easy to get wrong: the libvirt-docs RPM package,
for example, ends up missing one of the examples and
including a bunch of empty .deps/ directories.
Install the examples in $(docdir) as part of our regular
procedure, so that users and downstreams don't have to do
anything special about them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
At the moment we allow the user to specify exactly where
they want the HTML documentation to be installed with an
extreme level of precision through the --with-html-dir and
--with-html-subdir configure options.
Most of the time, of course, the user will stick with the
default, that is $(datadir)/doc/$(PACKAGE)-$(VERSION)/html.
So close to $(docdir)! Including the version number in
the path, specifically, seems entirely unnecessary since
different releases of libvirt are not going to be able to
coexist on the same system anyway.
Drop all these custom flexibilty for flexibilty's sake
shenaningans in favor of the standard, well understood
$(docdir).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Our XSLT magic generates one Devhelp-compatible HTML file
per documentation module, but so far we have only shipped
and installed documentation for virterror.
Now that we have $(modules), however, we can generate the
list of files the same way we do for regular documentation
and make sure we always ship and install everything.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
This variable contains a lists of documentation modules,
in a neutral format.
Right now is only used to define $(apihtml_generated), but
later on we're gonna reuse it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
In refactoring the snapshot code to prepare for checkpoints, I changed
qemuDomainMomentDiscardAll to take a callback that would handle the
cleanup of either a snapshot or a checkpoint, but failed to set the
callback on one of the two snapshot callers. As a result, 'virsh
undefine $dom --snapshots-metadata' crashed on a NULL function
dereference.
Fixes: a487890d37
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1707708
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This way more users can run our CI builds locally.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If no board was detected then VIR_REALLOC_N() done at the end of
the function will actually free the memory (because nborads ==
0), but @boards will be set to a non-NULL pointer. This makes it
unnecessary harder for a caller to see if any board was detected.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 105756660f was too eager and did
not consider SLES 12 which still has 2.0.1 that does not ship
a pkg-config file.
Similar to how we check for readline, prefer pkg-config if available
and fall back to the old detection code if not found.
NB: this is not a clean revert because we're not reintroducing support
for YAJL 1.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The way it works now the Makefile needs to be both make valid and automake
valid. That is fine for now, but if we want to use anything more advanced, like
conditionals, we cannot have it like that any more.
So instead forward all ci-* rules to that file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This brings about a couple of benefits:
- use of VIR_AUTOUNREF() simplifies several callers
- Fixes a todo about virDomainMomentObjList not being polymorphic enough
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
In preparation for making virDomainSnapshotDef a descendant of
virObject, it is time to fix all callers that allocate an object to
use virDomainSnapshotDefNew() instead of VIR_ALLOC(). Fortunately,
there aren't very many :)
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
VIR_CLASS_NEW insists that descendents of virObject have 'parent' as
the name of their inherited base class member at offset 0. While it
would be possible to write a new class-creation macro that takes the
actual field name 'current', and rewrite VIR_CLASS_NEW to call the new
macro with the hard-coded name 'parent', it seems less confusing if
all object code uses similar naming. Thus, this is a mechanical rename
in preparation of making virDomainSnapshotDef a descendent of
virObject.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
VIR_CLASS_NEW insists that descendents of virObject have 'parent' as
the name of their inherited base class member at offset 0. While it
would be possible to write a new class-creation macro that takes the
actual field name, and rewrite VIR_CLASS_NEW to call the new macro
with the hard-coded name 'parent', so that we could make
virDomainMomentDef use a custom name for its base class, it seems less
confusing if all object code uses similar naming. Thus, this is a
mechanical rename in preparation of making virDomainSnapshotDef a
descendent of virObject, when we can no longer use 'parent' for a
different purpose than the base class.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Use qemuDomainStorageSourceAccessModify with correct flags to do the
job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some operations e.g. namespace setup are not necessary when modifying
access to a file which the VM can already access. Add a flag which
allows to skip them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases when we need to modify access permissions for a storage
source which is already used by the VM we should not revoke all
permissions on a failure. Allow this in qemuDomainStorageSourceAccessModify
by adding a new flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than jumping to the correct label use a set of booleans to
determine which operation needs to be rolled back. This will allow more
flexibility when e.g. rollback after a failed operation will not be
necessary/desired.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new flag which will set the image as read-only even if the image
data allows writing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuDomainStorageSourceAccessModify instead of the individual calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new flag QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_CHAIN to select whether
to work on single image or full chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will add a few more flags. Add an enum to collect them
so that we don't end up with multiple bools.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function will be able to deal with non-chains too so drop 'Chain'
and also change the suffix to 'Modify' as it's used both for setup and
teardown.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce qemuDomainStorageSourceChainAccess(Allow|Revoke) as entry
points to qemuDomainStorageSourceChainAccessPrepare for symmetry with
the functions for single backing chain elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move it to qemu_domain.c and call it
qemuDomainStorageSourceChainAccessPrepare.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fedora 30 is out, which means that Fedora 28 is going to be
EOL very soon. Let's get ahead of the game and drop support
for it right now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Most releases don't need a "Removed features" section so don't include
it in the template by default, but leave a reminder in case it is
relevant.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
GitLab CI provides some shared build runners that use Docker containers.
This resource can usefully run cross-compiled builds since all other CI
build testing is currently x86 only, and Travis CI is already very busy
testing native builds.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If the source tree was freshly configured and no objects are
built yet then 'make check-access' has no test to run. Build
the sources beforehand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
