Commit Graph

1640 Commits

Author SHA1 Message Date
Laine Stump
bfe7721d50 util: move virFile* functions from virutil.c to virfile.c
These all existed before virfile.c was created, and for some reason
weren't moved.

This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.

This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
2013-05-10 13:09:30 -04:00
John Ferlan
7ca784c4a5 Build breaker - requires VIR_FROM_THIS 2013-05-10 08:52:43 -04:00
Michal Privoznik
e60b9783e1 Adapt to VIR_STRDUP and VIR_STRNDUP in tests/* 2013-05-10 11:54:29 +02:00
Eric Blake
1d21b884a3 tests: use portable shell code
'make check' fails since commit 470d5c46 on any system with dash
as /bin/sh, because '<<<' is a bash extension.  For example:

nwfilterschematest: 23: /home/eblake/libvirt/tests/schematestutils.sh: Syntax error: redirection unexpected

Also, there is no need to spawn a grep process when shell globbing
can do the same.

* tests/schematestutils.sh: Replace bashism and subprocess with a
faster and portable construct.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-09 11:46:45 -06:00
Daniel P. Berrange
7c5752dd57 Disable some URI tests on older libxml2
Older versions of libxml2 could not correctly parse certain
URIs. This causes test failures. There's nothing libvirt can
do about this, so disable the problem tests on old libxml2
versions

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-09 17:02:18 +01:00
Ján Tomko
1d96440a06 conf: don't crash on a tpm device with no backends
Print an error instead of crashing when a TPM device without
a backend is specified.

Add a test for tpm device with no backend, which should fail
with a parse error.

https://bugzilla.redhat.com/show_bug.cgi?id=961252
2013-05-09 14:25:11 +02:00
Ján Tomko
470d5c4654 tests: files named '.*-invalid.xml' should fail validation
Currently, using an invalid XML in tests fails, because
the schema test expects all of them to be valid.

Treat files with -invalid.xml suffix as invalid and expect
them to fail validation.
2013-05-09 14:25:11 +02:00
Daniel Hansel
e914dcfdaa rpc: message related sizes enlarged
We have seen an issue on s390x platform where domain XMLs larger than 1MB
were used. The define command was finished successfully. The dumpxml command
was not successful (i.e. could not encode message payload).

Enlarged message related sizes (e.g. maximum string size, message size, etc.)
to handle larger system configurations used on s390x platform.

To improve handling of the RPC message size the allocation during encode process
is changed to a dynamic one (i.e. starting with 64kB initial size and increasing
that size in steps up to 16MB if the payload data is larger).

Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-05-07 13:29:58 +02:00
Eric Blake
c21c38d71b build: clean up stray files found by 'make distcheck'
'make distcheck' complained:

ERROR: files left in build directory after distclean:
./python/libvirt.pyc
./tests/commandhelper.log

Problems introduced in commits f015495 and 25ea8e4 (both v1.0.3).

* tests/commandtest.c (test21): Check (and clean) log file.
* tests/commanddata/test21.log: New file.
* python/Makefile.am (CLEANFILES): Clean up compiled python files.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-06 14:01:08 -06:00
Laine Stump
cc8f9e677c util: fix compile errors caused by moving string functions
commit 7c9a2d8 missed adding in a few #include "virstring.h"s, causing
builds to fail.
2013-05-02 13:27:19 -04:00
Michal Privoznik
7c9a2d88cd virutil: Move string related functions to virstring.c
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
2013-05-02 16:56:55 +02:00
Viktor Mihajlovski
3a82f628a9 S390: Do not generate a default USB controller
For s390 we don't want to have a default USB device generated even
if QEMU is silently tolerating -usb on the command line. This may change
in the future.
Another reason to avoid the USB controller is that it implies a PCI
bus which might cause a regression at some later point in time.
The following change will set the USB controller model to 'none'
unless a model or address has been specified, which can be the case
if a legacy definition is loaded or the XML writer knows what
she/he's doing.
Requiring the user to explicitly disable USB on systems not supporting
it seems cumbersome.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-04-30 19:18:43 -06:00
Ján Tomko
dfb4834940 qemu: honor allowDiskFormatProbing when parsing command line
My commit 024e9af broke this.
2013-04-29 15:52:02 +02:00
Ján Tomko
877bc08947 qemu: don't always reserve PCI addresses for implicit controllers
In the past we automatically added a USB controller and assigned
it a PCI address (0:0:1.2) even on machines without a PCI bus.
This didn't break machines with no PCI bus  because the command
line for it is just '-usb', with no mention of the PCI bus.

The implicit IDE controller (reserved address 0:0:1.1) has
no command line at all.

Commit b33eb0dc removed the ability to reserve PCI addresses
on machines without a PCI bus. This made them stop working,
since there would always be the implicit USB controller.

Skip the reservation of addresses for these controllers when
there is no PCI bus, instead of failing.
2013-04-27 12:55:46 +02:00
Laine Stump
d64e114f14 network: support <driver name='vfio'/> in network definitions
I remembered to document this bit, but somehow forgot to implement it.

This adds <driver name='kvm|vfio'/> as a subelement to the <forward>
element of a network (this puts it parallel to the match between
mode='hostdev' attribute in a network and type='hostdev' in an
<interface>).

Since it's already documented, only the parser, formatter, backend
driver recognition (it just translates/moves the flag into the
<interface> at the appropriate time), and a test case were needed.

(I used a separate enum for the values both because the original is
defined in domain_conf.h, which is unavailable from network_conf.h,
and because in the future it's possible that we may want to support
other non-hostdev oriented driver names in the network parser; this
makes sure that one can be expanded without the other).
2013-04-26 21:51:12 -04:00
Ján Tomko
a12475bd44 qemu: don't assign a PCI address to 'none' USB controller
Adjust the usb-none test, since it gives the memballoon a lower PCI slot now.
Add a test for 'none' controller on s390, which doesn't have PCI buses.
2013-04-26 20:06:01 +02:00
Daniel P. Berrange
f3662737b1 Do proper escaping of cgroup resource partitions
If a user cgroup name begins with "cgroup.", "_" or with any of
the controllers from /proc/cgroups followed by a dot, then they
need to be prefixed with a single underscore. eg if there is
an object "cpu.service", then this would end up as "_cpu.service"
in the cgroup filesystem tree, however, "waldo.service" would
stay "waldo.service", at least as long as nobody comes up with
a cgroup controller called "waldo".

Since we require a '.XXXX' suffix on all partitions, there is
no scope for clashing with the kernel 'tasks' and 'release_agent'
files.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-26 13:52:02 +01:00
Daniel P. Berrange
9ddfe7eea6 Ensure all cgroup partitions have a suffix of ".partition"
If the partition named passed in the XML does not already have
a suffix, ensure it gets a '.partition' added to each component.
The exceptions are /machine, /user and /system which do not need
to have a suffix, since they are fixed partitions at the top
level.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-26 13:52:02 +01:00
Daniel P. Berrange
824e86e723 Change VM cgroup suffix from '{lxc,qemu}.libvirt' to 'libvirt-{lxc,qemu}'
Recently we changed to create VM cgroups with the naming pattern
$VMNAME.$DRIVER.libvirt. Following discussions with the systemd
community it was decided that only having a single '.' in the
names is preferrable. So this changes the naming scheme to be
$VMNAME.libvirt-$DRIVER. eg for LXC 'mycontainer.libvirt-lxc' or
for KVM 'myvm.libvirt-qemu'.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-26 13:52:02 +01:00
Stefan Berger
7e77f252bd test: Add JSON test for query-tpm-types
Add a test case for query-tpm-models QMP command.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2013-04-26 08:33:44 -04:00
Laine Stump
731b0f36f1 qemu: use vfio-pci on commandline when appropriate
The device option for vfio-pci is nearly identical to that for
pci-assign - only the configfd parameter isn't supported (or needed).

Checking for presence of the bootindex parameter is done separately
from constructing the commandline, similar to how it is done for
pci-assign.

This patch contains tests to check for proper commandline
construction. It also includes tests for parser-formatter-parser
roundtrips (xml2xml), because those tests use the same data files, and
would have failed had they been included before now.

qemu: xml/args tests for VFIO hostdev and <interface type='hostdev'/>

These should be squashed in with the patch that adds commandline
handling of vfio (they would fail at any earlier time).
2013-04-25 21:28:10 -04:00
Martin Kletzander
a553dbedb8 Fix usb master startport parsing
When all usb controllers connected to the same bus have <master
startport='x'/> specified, none of them have 'id=usb' assigned and
thus qemu fails due to invalid masterport specification (we use 'usb'
for that purpose).  Adding a check that at least one of the
controllers is specified without <master startport='x'/> and in case
this happens, error out due to invalid configuration.
2013-04-25 14:54:46 +02:00
Ján Tomko
9d6e56dbce qemu: auto-add bridges and allow using them
Add a "dry run" address allocation to figure out how many bridges
will be needed for all the devices without explicit addresses.

Auto-add just enough bridges to put all the devices on, or up to the
bridge with the largest specified index.
2013-04-25 13:19:40 +02:00
Ján Tomko
b33eb0dca1 qemu: auto-add pci-root controller for pc machine types
<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.

Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.
2013-04-25 13:05:10 +02:00
liguang
d350a34caf qemu: build command line for pci-bridge device
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2013-04-25 12:54:59 +02:00
Ján Tomko
024e9af3e5 qemu: call post-parse callbacks when parsing command line too
Now we set the default disk driver name when parsing
the qemu command line too, hence all the test changes.

Assume format type is 'auto' when none is specified on
qemu command line.
2013-04-25 12:10:22 +02:00
Li Zhang
dfd0e4f7f2 qemu: Add command line builder and parser for NVRAM.
This patch is to add command line builder and parser
for NVRAM device, and add test cases.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
2013-04-25 16:50:45 +08:00
Osier Yang
45d6c67143 Introduce a sub-element <driver> for controller
Like what we did for "disk", "filesystem" and "interface", this
introduces sub-element <driver> for "controller", and put the "queues"
into it.
2013-04-25 12:10:58 +08:00
Osier Yang
18b428980f Change the tag name "num_queues" into "queues"
Instead of making a choice between the underscore and camelCase, this
simply changes "num_queues" into "queues", which is also consistent
with Michal's multiple queue support for interface.
2013-04-24 23:36:07 +08:00
Peter Krempa
20cb7f3a41 qemu: Improve handling of channels when generating SPICE command line
Improve error reporting and generating of SPICE command line arguments
according to the need to enable TLS. If TLS is disabled, there's no need
to pass the certificate dir to qemu.

This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=953126
2013-04-24 14:37:57 +02:00
Daniel P. Berrange
d407a11eab Dedicated name for sub-driver open/close methods
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-24 10:59:54 +01:00
Daniel P. Berrange
07a6b9aac4 Rename 'DeviceMonitor' to 'NodeDeviceDriver'
The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-24 10:59:53 +01:00
Daniel P. Berrange
abe038cfc0 Extend previous check to validate driver struct field names
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-24 10:59:53 +01:00
Jiri Denemark
6d4804858e qemu: Use -machine accel=tcg|kvm when available
This is a better interface to choose accelerator than guessing whether
we should enable or disable kvm to get the right one.
2013-04-23 21:19:35 +02:00
Jiri Denemark
cfe24c1a18 qemu: Move -enable-kvm and friends earlier in the command line 2013-04-23 21:19:35 +02:00
Eric Blake
1bf25ba249 docs: fix usage of 'onto'
http://www.uhv.edu/ac/newsletters/writing/grammartip2009.07.01.htm
(and several other sites) give hints that 'onto' is best used if
you can also add 'up' just before it and still make sense. In many
cases in the code base, we really want the two-word form, or even
a simplification to just 'on' or 'to'.

* docs/hacking.html.in: Use correct 'on to'.
* python/libvirt-override.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* src/util/virpci.c: Likewise.
* daemon/THREADS.txt: Use simpler 'on'.
* docs/formatdomain.html.in: Better usage.
* docs/internals/rpc.html.in: Likewise.
* src/conf/domain_event.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* tests/qemumonitortestutils.c: Likewise.
* HACKING: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-04-19 14:31:16 -06:00
Li Zhang
88c6159ca7 Set legacy USB option with default for ppc64.
Currently, -device xxx still doesn't work well for ppc64 platform.
It's better use legacy USB option with default for ppc64.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-19 11:30:49 +01:00
Osier Yang
9969ade669 syntax-check: Only allows to include public headers in external tools
With this patch, include public headers in "" form is only allowed
for "internal.h". And only the external tools (examples|tools|python
|include/libvirt) can include the public headers in <> form.
2013-04-18 11:31:19 +08:00
Osier Yang
09d2547f96 qemu: Allow the disk wwn to have "0x" prefix
The recent qemu requires "0x" prefix for the disk wwn, this patch
changes virValidateWWN to allow the prefix, and prepend "0x" if
it's not specified. E.g.

qemu-kvm: -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,\
drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,wwn=6000c60016ea71ad:
Property 'scsi-hd.wwn' doesn't take value '6000c60016ea71ad'

Though it's a qemu regression, but it's nice to allow the prefix,
and doesn't hurt for us to always output "0x".
2013-04-17 23:05:56 +08:00
Osier Yang
2beae9c202 cleanup: Only include testutils.h once
No reason to include it in both "if" and "else" branches.
2013-04-17 15:41:04 +08:00
John Ferlan
c3ad5a3670 Resolve valgrind error
Commit id '1acfc171' resulted in the following valgrind failure:

==25317== 136 (24 direct, 112 indirect) bytes in 1 blocks are definitely lost in loss record 4 of 4
==25317==    at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==25317==    by 0x4C6F851: virAlloc (viralloc.c:124)
==25317==    by 0x4C71493: virBitmapNew (virbitmap.c:74)
==25317==    by 0x4C71B79: virBitmapNewData (virbitmap.c:434)
==25317==    by 0x402EF2: test8 (virbitmaptest.c:436)
==25317==    by 0x40499F: virtTestRun (testutils.c:157)
==25317==    by 0x402E8D: mymain (virbitmaptest.c:474)
==25317==    by 0x404FDA: virtTestMain (testutils.c:719)
==25317==    by 0x39D0821A04: (below main) (in /usr/lib64/libc-2.16.so)
2013-04-16 07:13:43 -04:00
Daniel P. Berrange
83336118db Track symlinks for co-mounted cgroup controllers
If a cgroup controller is co-mounted with another, eg

   /sys/fs/cgroup/cpu,cpuacct

Then it is a requirement that there exist symlinks at

   /sys/fs/cgroup/cpu
   /sys/fs/cgroup/cpuacct

pointing to the real mount point. Add support to virCgroupPtr
to detect and track these symlinks

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:32 +01:00
Daniel P. Berrange
767596bdb4 Remove non-functional code for setting up non-root cgroups
The virCgroupNewDriver method had a 'bool privileged' param.
If a false value was ever passed in, it would simply not
work, since non-root users don't have any privileges to create
new cgroups. Just delete this broken code entirely and make
the QEMU driver skip cgroup setup in non-privileged mode

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
8d4adf3efa Add XML config for resource partitions
Allow VMs to be placed into resource groups using the
following syntax

  <resource>
    <partition>/virtualmachines/production</partition>
  </resource>

A resource cgroup will be backed by some hypervisor specific
functionality, such as cgroups with KVM/LXC.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
aa8604dd45 Add a new virCgroupNewPartition for setting up resource partitions
A resource partition is an absolute cgroup path, ignoring the
current process placement. Expose a virCgroupNewPartition API
for constructing such cgroups

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
8d1c141a8d Refactor cgroups internal data structures
Currently the virCgroupPtr struct contains 3 pieces of
information

 - path - path of the cgroup, relative to current process'
   cgroup placement
 - placement - current process' placement in each controller
 - mounts - mount point of each controller

When reading/writing cgroup settings, the path & placement
strings are combined to form the file path. This approach
only works if we assume all cgroups will be relative to
the current process' cgroup placement.

To allow support for managing cgroups at any place in the
heirarchy a change is needed. The 'placement' data should
reflect the absolute path to the cgroup, and the 'path'
value should no longer be used to form the paths to the
cgroup attribute files.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
d14524701a Add a test suite for cgroups functionality
Some aspects of the cgroups setup / detection code are quite subtle
and easy to break. It would greatly benefit from unit testing, but
this is difficult because the test suite won't have privileges to
play around with cgroups. The solution is to use monkey patching
via LD_PRELOAD to override the fopen, open, mkdir, access functions
to redirect access of cgroups files to some magic stubs in the
test suite.

Using this we provide custom content for the /proc/cgroup and
/proc/self/mounts files which report a fixed cgroup setup. We
then override open/mkdir/access so that access to the cgroups
filesystem gets redirected into files in a temporary directory
tree in the test suite build dir.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
b7f1d218d8 Conditionally compile storagevolxml2argvtest
Only compile storagevolxml2argvtest if WITH_STORAGE is
set, because it links to that driver

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
c78a2b13a6 Conditionalize use of symlink() function in test suite
On Win32 symlink() is not available, so virstoragetest.c
must be conditionalized to avoid compile failures.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:30 +01:00
Stefan Berger
c772feb069 Add test case for TPM passthrough
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
2013-04-12 16:55:46 -04:00
Li Zhang
a6e37aedff Add USB option capability
To avoid the collision for creating USB controllers in machine->init()
and -device xx command line, it needs to set usb=off to avoid one USB
controller created in machine->init(). So that libvirt can use -device
or -usb to create USB controller sucessfully.
So QEMU_CAPS_MACHINE_USB_OPT capability is added, and it is for QEMU
v1.3.0 onwards which supports USB option.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
2013-04-12 10:56:03 +01:00
Bogdan Purcareata
442d6a0527 Implement support for <hostdev caps=net>
This allows a container-type domain to have exclusive access to one of
the host's NICs.

Wire <hostdev caps=net> with the lxc_controller - when moving the newly
created veth devices into a new namespace, also look for any hostdev
devices that should be moved. Note: once the container domain has been
destroyed, there is no code that moves the interfaces back to the
original namespace. This does happen, though, probably due to default
cleanup on namespace destruction.

Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
2013-04-08 17:40:08 +01:00
Osier Yang
664270b849 Support seclabels for volume type disk
"seclabels" is only valid for 'file' or 'block' type storage volume.
2013-04-08 18:59:50 +08:00
Osier Yang
43404fee37 Support startupPolicy for 'volume' disk
"startupPolicy" is only valid for file type storage volume, otherwise
it fails on starting the domain.
2013-04-08 18:54:37 +08:00
Osier Yang
4bc331c894 Introduce new XMLs to specify disk source using libvirt storage
With this patch, one can specify the disk source using libvirt
storage like:

  <disk type='volume' device='disk'>
    <driver name='qemu' type='raw' cache='none'/>
    <source pool='default' volume='fc18.img'/>
    <target dev='vdb' bus='virtio'/>
  </disk>

"seclabels" and "startupPolicy" are not supported for this new
disk type ("volume"). They will be supported in later patches.

docs/formatdomain.html.in:
  * Add documents for new XMLs
docs/schemas/domaincommon.rng:
  * Add rng for new XMLs;
src/conf/domain_conf.h:
  * New struct for 'volume' type disk source (virDomainDiskSourcePoolDef)
  * Add VIR_DOMAIN_DISK_TYPE_VOLUME for enum virDomainDiskType
src/conf/domain_conf.c:
  * New helper virDomainDiskSourcePoolDefParse to parse the 'volume'
    type disk source.
  * New helper virDomainDiskSourcePoolDefFree to free the source def
    if 'volume' type disk.
tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
tests/qemuxml2xmltest.c:
  * New test
2013-04-08 18:48:14 +08:00
Osier Yang
9f781da69d New XML attributes for storage pool source adapter
This introduces 4 new attributes for storage pool source adapter.
E.g.

<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>

Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults
to 'scsi_host' if attribute 'name' is specified. I.e. It's optional
for 'scsi_host' adapter, for back-compat reason. However, mandatory
for 'fc_host' adapter and any new future adapter types. Attribute
'parent' is to specify the parent for the fc_host adapter.

* docs/formatstorage.html.in:
  - Add documents for the 4 new attrs
* docs/schemas/storagepool.rng:
  - Add RNG schema
* src/conf/storage_conf.c:
  - Parse and format the new XMLs
* src/conf/storage_conf.h:
  - New struct virStoragePoolSourceAdapter, replace "char *adapter" with it;
  - New enum virStoragePoolSourceAdapterType
* src/libvirt_private.syms:
  - Export TypeToString and TypeFromString
* src/phyp/phyp_driver.c:
  - Replace "adapter" with "adapter.data.name", which is member of the union
    of the new struct virStoragePoolSourceAdapter now. Later patch will
    add the checking, as "adapter.data.name" is only valid for "scsi_host"
    adapter.
* src/storage/storage_backend_scsi.c:
  - Like above
* tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml:
  - New test for 'fc_host' and "scsi_host" adapter
* tests/storagepoolxml2xmlout/pool-scsi.xml:
  - Change the expected output, as the 'type' defaults to 'scsi_host' if 'name"
    specified now
* tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml:
  - New test
* tests/storagepoolxml2xmltest.c:
  - Include the test
2013-04-08 18:41:06 +08:00
Daniel P. Berrange
2d77704509 Avoid cast alignment warnings in port allocator test
To avoid

virportallocatortest.c: In function 'bind':
virportallocatortest.c:34:33: warning: cast increases required alignment of target type [-Wcast-align]
     struct sockaddr_in *saddr = (struct sockaddr_in *)addr;
                                 ^

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:21 +01:00
Daniel P. Berrange
15d8511b41 Add a test suite for keycode mapping functions
Validate that translations between different keycode sets
are functioning.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:20 +01:00
Osier Yang
1acfc171da util: Add a helper to check if all bits of a bitmap are clear 2013-04-06 10:14:21 +08:00
Osier Yang
d4bf0a9378 qemu: Support multiple queue virtio-scsi
This introduce a new attribute "num_queues" (same with the good name
QEMU uses) for virtio-scsi controller. An example of the XML:

<controller type='scsi' index='0' model='virtio-scsi' num_queues='8'/>

The corresponding QEMU command line:

-device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
2013-04-06 10:08:47 +08:00
Daniel P. Berrange
b1d3154a50 Ensure LD_PRELOAD exists before running test case
The linker will ignore LD_PRELOAD libraries which do not
exist, just printing a warning message. This is not helpful
for the test suite which will be utterly fubar without the
preload library present. Add an explicit test for existence
of the library to protect against this

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-05 10:41:46 +01:00
Peter Krempa
482e5f159c virCaps: get rid of defaultConsoleTargetType callback
This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.

A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.
2013-04-04 22:42:39 +02:00
Peter Krempa
46becc18ba virCaps: get rid of macPrefix field
Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.

Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.
2013-04-04 22:42:38 +02:00
Peter Krempa
8960d65674 virCaps: get rid of hasWideScsiBus
Use the virDomainXMLConf structure to hold this data.
2013-04-04 22:42:38 +02:00
Peter Krempa
b299084988 virCaps: get rid of defaultDiskDriverType
Use the qemu specific callback to fill this data in the qemu driver as
it's the only place where it was used and fix tests as the qemu test
capability object didn't configure the defaults for the tests.
2013-04-04 22:42:38 +02:00
Peter Krempa
b5def001cc virCaps: get rid of emulatorRequired
This patch removes the emulatorRequired field and associated
infrastructure from the virCaps object. Instead the driver specific
callbacks are used as this field isn't enforced by all drivers.

This patch implements the appropriate callbacks in the qemu and lxc
driver and moves to check to that location.
2013-04-04 22:42:38 +02:00
Peter Krempa
9ea249e7d9 virCaps: get rid of defaultDiskDriverName
This patch removes the defaultDiskDriverName from the virCaps
structure. This particular default value is used only in the qemu driver
so this patch uses the recently added callback to fill the driver name
if it's needed instead of propagating it through virCaps.
2013-04-04 22:42:38 +02:00
Peter Krempa
a68d672667 qemu: Record the default NIC model in the domain XML
This patch implements the devices post parse callback and uses it to fill
the default qemu network card model into the XML if none is specified.

Libvirt assumes that the network card model for qemu is the "rtl8139".
Record this in the XML using the new callback to avoid user
confusion.
2013-04-04 22:41:20 +02:00
Peter Krempa
ad0d10b2b1 conf callback: Rearrange function parameters
Move the xmlopt and caps arguments to the end of the argument list.
2013-04-04 22:41:19 +02:00
Peter Krempa
43b99fc4c0 conf: Add post XML parse callbacks and prepare for cleaning of virCaps
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.

With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.

Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
  - called for a single device parsed and for every single device in a
    domain config. A virDomainDeviceDefPtr is passed along with the
    domain definition and virCaps.

* virDomainDefPostParseCallback, (domainPostParseCallback)
  - A callback that is meant to process the domain config after it's
  parsed.  A virDomainDefPtr is passed along with virCaps.

Both types of callbacks support arbitrary opaque data passed for the
callback functions.

Errors may be reported in those callbacks resulting in a XML parsing
failure.
2013-04-04 22:29:48 +02:00
Peter Krempa
e84b19316a maint: Rename xmlconf to xmlopt and virDomainXMLConfig to virDomainXMLOption
This patch is the result of running:

for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
  sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done

and a few manual tweaks.
2013-04-04 22:18:56 +02:00
Daniel P. Berrange
347081effa Implement minimal sysinfo for ARM platforms
Implement the bare minimal sysinfo for ARM platforms by
reading the CPU models from /proc/cpuinfo

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:31 +01:00
Daniel P. Berrange
0464ab183d Disable of unused sysinfotest functions
Certain functions in the sysinfotest.c are not used unless
a whitelisted architecture is being built. Disable those
functions unless required to avoid warnings about unused
functions.

sysinfotest.c:93:1: warning: 'sysinfotest_run' defined but not used [-Wunused-function]
 sysinfotest_run(const char *test,

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:00 +01:00
Martin Kletzander
e7cd2844ca Allow multiple parameters for schedinfo
virsh schedinfo was able to set only one parameter at a time (not
counting the deprecated options), but it is useful to set more at
once, so this patch adds the possibility to do stuff like this:

virsh schedinfo <domain> cpu_shares=0 vcpu_period=0 vcpu_quota=0 \
emulator_period=0 emulator_quota=0

Invalid scheduler options are reported as well.  These were previously
reported only if the command hadn't updated any values (when
cmdSchedInfoUpdate returned 0).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=810078
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919372
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919375
2013-04-03 08:49:30 +02:00
Peter Krempa
ab4bf20ead util: Change virMacAddrFormat to lowercase hex characters
The domain XML generator creates the mac addres strings with lowercase
strings with a separate piece of code. This patch changes the formating
helper to do the same stuff to allow using it to normalize a string
provided by the user. After this change some of the tests that are
outputing the mac address will need to be changed.
2013-04-02 15:53:43 +02:00
Li Zhang
f84b92ea19 Optimize machine option to set more options with it
Currently, -machine option is used only when dump-guest-core is set.

To use options defined in machine option for newer version of QEMU,
it needs to use -machine xxx, and to be compatible with older version
-M, this patch adds QEMU_CAPS_MACHINE_OPT capability for newer
version which supports -machine option.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-04-02 07:02:34 -06:00
Eric Blake
6f7e4ea359 smartcard: spell ccid-card-emulated qemu property correctly
Reported by Anthony Messina in
https://bugzilla.redhat.com/show_bug.cgi?id=904692
Present since introduction of smartcard support in commit f5fd9baa

* src/qemu/qemu_command.c (qemuBuildCommandLine): Match qemu spelling.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.args:
Fix broken test.
2013-04-02 06:23:33 -06:00
Ján Tomko
f03dcc5df1 qemu: Allow migration over IPv6
Allow migration over IPv6 by listening on [::] instead of 0.0.0.0
when QEMU supports it (QEMU_CAPS_IPV6_MIGRATION) and there is
at least one v6 address configured on the system.

Use virURIParse in qemuMigrationPrepareDirect to allow parsing
IPv6 addresses, which would cause an 'incorrect :port' error
message before.

Move setting of migrateFrom from qemuMigrationPrepare{Direct,Tunnel}
after domain XML parsing, since we need the QEMU binary path from it
to get its capabilities.

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=846013
2013-04-02 11:23:47 +02:00
Eric Blake
7524cd893e Revert "qemu: detect multi-head qxl via more than version check"
This reverts commit 5ac846e42e.

After further discussions with Alon Levy, I learned the following:

The use of '-vga qxl' vs. '-device qxl-vga' is completely orthogonal
to whether ram_size can be exposed.  Downstream distros are interested
in backporting support for multi-head qxl, but this can be done in
one of two ways:
1. Support one head per PCI device.  If you do this, then it makes
sense to have full control over the PCI address of each device. For
full control, you need '-device qxl-vga' instead of '-vga qxl'.
2. Support multiple heads through a single PCI device.  If you do
this, then you need to allocate more RAM to that PCI device (enough
ram to cover the multiple screens).  Here, the device is hard-coded
to 0:0:2.0, both in qemu and libvirt code.

Apparently, backporting ram_size changes to allow multiple heads in
a single device is much easier than backporting multiple device
support.  Furthermore, the presence or absence of qxl-vga.surfaces
is no different than the presence or absence of qxl-vga.ram_size;
both properties can be applied regardless of whether you have one
PCI device (-vga qxl) or multiple (-device qxl-vga), so this property
is NOT a good witness of whether '-device qxl-vga' support has been
backported.

Downstream RHEL will NOT be using this patch; and worse, leaving this
patch in risks doing the wrong thing if compiling upstream libvirt
on RHEL, so the best course of action is to revert it.  That means
that libvirt will go back to only using '-device qxl-vga' for qemu
>= 1.2, but this is just fine because we know of no distros that plan
on backporting multiple PCI address support to any older version of
qemu.  Meanwhile, downstream can still use ram_size to pack multiple
heads through a single PCI device.
2013-03-25 08:38:35 -06:00
Michal Privoznik
70bc623b58 viralloc: Export virAllocTest*
If users build with --enable-test-oom configure option,
they get this error saying, virAllocTest* functions are
not defined within tests/testutils.c.
2013-03-22 12:45:14 +01:00
Paolo Bonzini
9f7a9aee37 qemu: add support for LSI MegaRAID SAS1078 (aka megasas) SCSI controller
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:11:14 +08:00
Paolo Bonzini
523207fe8c qemu: pass iscsi authorization credentials
A better way to do this would be to use a configuration file like

   [iscsi "target-name"]
   user = name
   password = pwd

and pass it via -readconfig.  This would remove the username and password
from the "ps" output.  For now, however, keep this solution.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:23 +08:00
Paolo Bonzini
6dca6d84ed domain: parse XML for iscsi authorization credentials
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:23 +08:00
Paolo Bonzini
c820fbff9f qemu: support passthrough for iscsi disks
This enables usage of commands like persistent reservations.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:23 +08:00
Paolo Bonzini
1a308ee015 qemu: add support for libiscsi
libiscsi provides a userspace iSCSI initiator.

The main advantage over the kernel initiator is that it is very
easy to provide different initiator names for VMs on the same host.
Thus libiscsi supports usage of persistent reservations in the VM,
which otherwise would only be possible with NPIV.

libiscsi uses "iscsi" as the scheme, not "iscsi+tcp".  We can change
this in the tests (while remaining backwards-compatible manner, because
QEMU uses TCP as the default transport for both Gluster and NBD).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:22 +08:00
Paolo Bonzini
1d94891288 domain: add support for iscsi network disks
This plumbs in the XML description of iSCSI shares.  The next patches
will add support for the libiscsi userspace initiator.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-20 17:30:25 -06:00
Olivia Yin
0b3509e245 qemu: add dtb option support
The "dtb" option sets the filename for the device tree.
If without this option support, "-dtb file" will be converted into
<qemu:commandline> in domain XML file.
For example, '-dtb /media/ram/test.dtb' will be converted into
  <qemu:commandline>
    <qemu:arg value='-dtb'/>
    <qemu:arg value='/media/ram/test.dtb'/>
  </qemu:commandline>

This is not very friendly.
This patchset add special <dtb> tag like <kernel> and <initrd>
which is easier for user to write domain XML file.
  <os>
    <type arch='ppc' machine='ppce500v2'>hvm</type>
    <kernel>/media/ram/uImage</kernel>
    <initrd>/media/ram/ramdisk</initrd>
    <dtb>/media/ram/test.dtb</dtb>
    <cmdline>root=/dev/ram rw console=ttyS0,115200</cmdline>
  </os>

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-19 15:48:58 -06:00
Gene Czarcinski
1cd2078c88 rename tests/conftest.c
To prevent confusion with configure's popular name
for a file, rename conftest.c to test_conf.c which
is consistent with the invoking test_conf.sh
Signed-off-by: Gene Czarcinski <gene@czarc.net>
2013-03-19 13:13:28 -06:00
Daniel P. Berrange
3aabe27247 Define internal APIs for managing identities
Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-19 13:37:37 +00:00
Paolo Bonzini
eebbb232e6 qemu: support URI syntax for NBD
QEMU 1.3 and newer support an alternative URI-based syntax to specify
the location of an NBD server.  Libvirt can keep on using the old
syntax in general, but only the URI syntax supports IPv6 addresses.

The URI syntax also supports relative paths to Unix sockets.  These
should never be used but aren't explicitly blocked either by the parser,
so support it just in case.

The URI syntax is intentionally compatible with Gluster's, and the
code can be reused.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 15:47:50 -06:00
Paolo Bonzini
be2a15dd60 qemu: support NBD with Unix sockets
This reuses the XML format that was introduced for Gluster.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 15:27:56 -06:00
Paolo Bonzini
0aa9f522c4 qemu: support named nbd exports
These are supported by nbd-server and by the NBD server that QEMU
embeds for live image access.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 15:12:41 -06:00
Paolo Bonzini
b96e0c18e1 qemu: test NBD command-line builder and parser
Enable more testing of NBD parsing, to ensure rewrites work.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 14:42:45 -06:00
Viktor Mihajlovski
53187afd81 S390: Testcases for virtio-scsi and virtio-rng
Adding test cases for virtio-scsi and virtio-rng. Since ccw is covering
the superset of the s390 bus handling, these are deemed to be sufficient.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-03-14 15:53:20 -06:00
Viktor Mihajlovski
6c92773256 qemu: Rename virtio-scsi capability
QEMU_CAPS_VIRTIO_SCSI_PCI implies that virtio-scsi is only supported
for the PCI bus, which is not the case. Remove the _PCI suffix.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-03-14 14:56:11 -06:00
Eric Blake
5ac846e42e qemu: detect multi-head qxl via more than version check
Multi-head QXL support is so useful that distros have started to
backport it to qemu earlier than 1.2.  After discussion with
Alon Levy, we determined that the existence of the qxl-vga.surfaces
property is a reliable indicator of whether '-device qxl-vga' works,
or whether we have to stick to the older '-vga qxl'.  I'm leaving
in the existing check for QEMU_CAPS_DEVICE_VIDEO_PRIMARY tied to
qemu 1.2 and newer (in case qemu is built without qxl support),
but for those distros that backport qxl, this additional capability
check will allow the correct command line for both RHEL 6.3 (which
lacks the feature) and RHEL 6.4 (where qemu still claims to be
version 0.12.2.x, but has backported multi-head qxl).

* src/qemu/qemu_capabilities.c (virQEMUCapsObjectPropsQxlVga): New
property test.
(virQEMUCapsExtractDeviceStr): Probe for backport of new
capability to qemu earlier than 1.2.
* tests/qemuhelpdata/qemu-kvm-1.2.0-device: Update test.
* tests/qemuhelpdata/qemu-1.2.0-device: Likewise.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device:
Likewise.
2013-03-14 09:38:20 -06:00
Daniel P. Berrange
1732c1c629 Fix parsing of SELinux ranges without a category
Normally libvirtd should run with a SELinux label

  system_u:system_r:virtd_t:s0-s0:c0.c1023

If a user manually runs libvirtd though, it is sometimes
possible to get into a situation where it is running

  system_u:system_r:init_t:s0

The SELinux security driver isn't expecting this and can't
parse the security label since it lacks the ':c0.c1023' part
causing it to complain

  internal error Cannot parse sensitivity level in s0

This updates the parser to cope with this, so if no category
is present, libvirtd will hardcode the equivalent of c0.c1023.

Now this won't work if SELinux is in Enforcing mode, but that's
not an issue, because the user can only get into this problem
if in Permissive mode. This means they can now start VMs in
Permissive mode without hitting that parsing error

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-14 12:42:21 +00:00
Peter Krempa
32bd699f55 virtio-rng: Add rate limiting options for virtio-RNG
Qemu's implementation of virtio RNG supports rate limiting of the
entropy used. This patch exposes the option to tune this functionality.

This patch is based on qemu commit 904d6f588063fb5ad2b61998acdf1e73fb4

The rate limiting is exported in the XML as:
<devices>
  ...
  <rng model='virtio'>
    <rate bytes='123' period='1234'/>
    <backend model='random'/>
  </rng>
  ...
2013-03-14 13:28:10 +01:00
Viktor Mihajlovski
3eefaccd47 S390: Testcases for virtio-ccw machines
This adds and corrects testcases for virtio devices on s390
guests.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-03-13 18:21:50 -06:00
Peter Krempa
27cf98e2d1 virCaps: conf: start splitting out irrelevat data
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.

This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:

1) Get rid of the stuff from virCaps

2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.

This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
2013-03-13 09:27:14 +01:00
Dusty Mabe
d3092c60f7 capabilities: add NUMA memory information
'virsh capabilities' will now include a new <memory> element
per <cell> of the topology, as in:

    <topology>
      <cells num='2'>
        <cell id='0'>
          <memory unit='KiB'>12572412</memory>
          <cpus num='12'>
          ...
        </cell>

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-08 11:51:00 -07:00
Daniel P. Berrange
75e656a363 Fix crash parsing RNG device specification
Code that validates the whitelist for the RNG device filename
didn't account for fact that filename may be NULL. This led
to a NULL reference crash. This wasn't caught since the test
suite was not covering this XML syntax

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-07 12:57:10 +00:00
Eric Blake
4932ef4502 rng: restrict passthrough names to known-good files
There is some controversy[1] on the qemu list on whether qemu should
have ever allowed arbitrary file name passthrough, or whether it
should be restricted to JUST /dev/random and /dev/hwrng.  It is
always easier to add support for additional filenames than it is
to remove support for something once released, so this patch
restricts libvirt 1.0.3 (where the virtio-random backend was first
supported) to just the two uncontroversial names, letting us defer
to a later date any decision on whether supporting arbitrary files
makes sense. Additionally, since qemu 1.4 does NOT support
/dev/fdset/nnn fd passthrough for the backend, limiting to just
two known names means that we don't get tempted to try fd
passthrough where it won't work.

[1]https://lists.gnu.org/archive/html/qemu-devel/2013-03/threads.html#00023

* src/conf/domain_conf.c (virDomainRNGDefParseXML): Only allow
/dev/random and /dev/hwrng.
* docs/schemas/domaincommon.rng: Flag invalid files.
* docs/formatdomain.html.in (elementsRng): Document this.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.args:
Update test to match.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.xml:
Likewise.
2013-03-04 17:45:38 -07:00
Daniel P. Berrange
0204d6d7a0 Fix TLS tests with gnutls 3
When given a CA cert with basic constraints to set non-critical,
and key usage of 'key signing', this should be rejected. Version
of GNUTLS < 3 do not rejecte it though, so we never noticed the
test case was broken

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-04 17:42:16 +00:00
Laine Stump
db2536a627 Revert "Add support for <option> tag in network config"
This reverts commit 383ebc4694.

We decided the xml for this feature needed more thought to make sure
we are doing it the best way, in particular wrt option values that
have multiple items.
2013-02-27 10:55:24 -05:00
Peter Krempa
2ab08e6cb1 tests: Test XML entities in source path for RNG device
Users may want to specify XML entities in paths to devices. Ensure they
are parsed and used properly.
2013-02-27 11:04:41 +01:00
Ján Tomko
ecc17eb46d tests: fix leaks in storagevolxml2argvtest
Reported by John Ferlan.
2013-02-27 10:11:52 +01:00
Eric Blake
9194679e10 tests: skip virstoragetest on RHEL 5
virstoragetest was failing on RHEL 5, but with no good error message:

TEST: virstoragetest
                                        0   FAIL

It turns out that qemu-img was so old, that it lacked support for
-o backing_file.  It didn't help that the test was also using
qemu-img from PATH, even after first probing for kvm-img.

* tests/virstoragetest.c (testPrepImages): Consistently use
discovered binary.  Skip instead of fail if qemu-img fails during
setup.
2013-02-26 12:53:36 -07:00
Eric Blake
b6176e5226 tests: old automake lacks abs_builddir
On RHEL 5, 'make check' included failures such as:

TEST: virstoragetest
unable to create directory /virstoragedata/sub
unable to return to correct directory, refusing to clean up /virstoragedata

It turns out that with automake 1.9.x, $(abs_builddir) is not
automatically provided.  We have previously worked around this
by using `pwd` before, but because we did not do it everywhere,
we had a number of broken tests.

This patch brings RHEL 5 from 8 failed tests down to 5 (the
remaining failures may be due to bugs in the older libxml2 and
RNG schema validation available in RHEL 5, so I'm not sure if
they can be fixed in libvirt, but I'm still investigating).

* tests/Makefile.am (AM_CFLAGS): Reliably set abs_builddir.
(*_la_CFLAGS): Factor out common settings; delete when nothing
remains to be added.
2013-02-26 10:37:50 -07:00
Eric Blake
eb41338e25 tests: consistent skip messages
On RHEL 5, I noticed this test failure message:

TEST: qemumonitorjsontest
libvirt not compiled with yajl, skippingSKIP: qemumonitorjsontest

* tests/virstoragetest.c (testPrepImages): Use simpler fputs.
* tests/qemumonitorjsontest.c (mymain): Ensure trailing newline.
2013-02-26 10:06:25 -07:00
Eric Blake
dce95297e3 tests: uniformly report test failures
testutils.c likes to print summaries after a test completes,
including if it failed.  But if the test outright exit()s,
this summary is skipped.  Enforce that we return instead of exit.

* cfg.mk (sc_prohibit_exit_in_tests): New syntax check.
* tests/commandhelper.c (main): Fix offenders.
* tests/qemumonitorjsontest.c (mymain): Likewise.
* tests/seclabeltest.c (main): Likewise.
* tests/securityselinuxlabeltest.c (mymain): Likewise.
* tests/securityselinuxtest.c (mymain): Likewise.
* tests/testutils.h (VIRT_TEST_MAIN_PRELOAD): Likewise.
* tests/testutils.c (virtTestMain): Likewise.
(virtTestCaptureProgramOutput): Use symbolic name.
2013-02-25 17:38:11 -07:00
Eric Blake
f20b047691 tests: don't test json when not compiled in
Now that the segfault is solved, we can skip instead of fail
the test when yajl is not present.

* tests/qemumonitorjsontest.c (mymain): Skip if no yajl.
2013-02-25 17:38:05 -07:00
Eric Blake
848a3b1d5b tests: avoid segfault if json monitor not present
On a machine without yajl headers, I was seeing random segfaults
from qemumonitorjsontest (about 90% of the runs on my particular
machine).  The segfault was inside virClassIsDerivedFrom, which
points to a case of a race leading to unreferencing a stale
pointer to an object that had already been freed.  I also noticed
that if I got the segfault, I was seeing messages such as:

2013-02-22 16:12:37.504+0000: 19833: error : virNetSocketWriteWire:1361 : Cannot write data: Bad file descriptor

which is also evidence of deferencing a stale pointer.  I traced it
to a race where qemuMonitorTestIO could execute late, after the
main thread had already called qemuMonitorTestFree and called
virNetSocketClose(test->client) but not clearing it out to NULL.
Sure enough, after test->client has been closed, fd is -1, which
causes an attempt to write to the socket to fail, which in turn
triggers the error code of qemuMonitorTestIO that tries to re-close
test->client.

* tests/qemumonitortestutils.c (qemuMonitorTestIO): Don't attempt
to free client again if test already quit.
2013-02-25 17:37:14 -07:00
Peter Krempa
e8b70ab743 tests: Add tests for virtio-rng device handling
Adds XML parsing and qemu commandline tests for the VirtIO RNG device
support.
2013-02-25 10:58:04 +01:00
Gene Czarcinski
0b73a763f3 use client id for IPv6 DHCP host definition
Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address.  Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used.  According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.

Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.

Documentation and schemas have been updated.

Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
2013-02-25 02:49:06 -05:00
Ján Tomko
81738cd014 storage: move qemu-img options before positional arguments
Modify the expected output of storagevolxml2argv tests as well.
2013-02-24 18:11:40 +01:00
Ján Tomko
56e1b4c30f storage: add test for qemu-img command line generation 2013-02-24 18:11:40 +01:00
Pieter Hollants
383ebc4694 Add support for <option> tag in network config
This patch adds support for a new <option>-Tag in the <dhcp> block of
network configs, based on a subset of the fifth proposal by Laine
Stump in the mailing list discussion at
https://www.redhat.com/archives/libvir-list/2012-November/msg01054.html.
Any such defined option will result in a dhcp-option=<number>,"<value>"
statement in the generated dnsmasq configuration file.

Currently, DHCP options can be specified by number only and there is
no whitelisting or blacklisting of option numbers, which should
probably be added.

Signed-off-by: Pieter Hollants <pieter@hollants.com>
Signed-off-by: Laine Stump <laine@laine.org>
2013-02-22 19:45:19 -05:00
Daniel P. Berrange
7ea8c5d140 s/arm/armv7l/ in caps-qemu-kvm.xml
Fix the caps-qemu-kvm.xml test data file to refer to correct
arm arch name.
2013-02-22 15:49:51 +00:00
John Ferlan
11a1181260 commandtest: Resolve some coverity resource leaks 2013-02-16 07:44:35 -05:00
John Ferlan
e2f1fc5220 drivermodule: Ignore coverity warning about leaked_storage 2013-02-16 07:44:34 -05:00
Eric Blake
a18452d0d2 storage: test backing chain traversal
Testing our backing chain handling will make it much easier to
ensure that we avoid issues in the future.  If only I had written
this test before I first caused several regressions...

* tests/virstoragetest.c: New test.
* tests/Makefile.am (test_programs): Build it.
* .gitignore: Ignore new files.
2013-02-15 16:07:01 -07:00
Eric Blake
ec8a2d0327 regex: gnulib guarantees that we have regex support
No need to use HAVE_REGEX_H - our use of gnulib guarantees that
the header exists and works, regardless of platform.  Similarly,
we can unconditionally assume a compiling <sys/wait.h> (although
the mingw version of this header is not full-featured).

* src/storage/storage_backend.c: Drop useless conditional.
* tests/testutils.c: Likewise.
2013-02-15 13:01:23 -07:00
Eric Blake
c6f1060ca7 util: add virendian.h macros
We have several cases where we need to read endian-dependent
data regardless of host endianness; rather than open-coding
these call sites, it will be nicer to funnel things through
a macro.

The virendian.h file can be expanded to add writer functions,
and/or 16-bit access patterns, if needed.  Also, if we need
to turn things into a function to avoid multiple evaluations
of buf, that can be done later.  But for now, a macro worked.

* src/util/virendian.h: New file.
* src/Makefile.am (UTIL_SOURCES): Ship it.
* tests/virendiantest.c: New test.
* tests/Makefile.am (test_programs, virendiantest_SOURCES): Run
the test.
* .gitignore: Ignore built file.
2013-02-12 09:00:15 -07:00
Eric Blake
ca7cc85245 build: fix VPATH testsuite
'make check' has been failing on VPATH builds since commit
907a39e7.  The tests already had magic for munging path names,
but were munging to the wrong location, thus working only on
an in-tree build.

* tests/securityselinuxlabeltest.c (testSELinuxMungePath): Munge
to correct path.
2013-02-11 15:59:42 -07:00
Daniel P. Berrange
11d926659b Turn virSecurityManager into a virObjectLockable
To enable locking to be introduced to the security manager
objects later, turn virSecurityManager into a virObjectLockable
class

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-11 12:33:41 +00:00
Daniel P. Berrange
32803ba409 Rename 'qemuCapsXXX' to 'virQEMUCapsXXX'
To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-08 11:49:14 +00:00
Daniel P. Berrange
fed92f08db Turn virCapabilities into a virObject
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-08 11:34:26 +00:00
Daniel P. Berrange
9cceb0fc35 Fix PKI directory used for QEMU test suite
The data files for testing QEMU command line generation are
hardcoded to use /etc/pki, so we should explicitly set that
in the test case, avoiding the dynamic SYSCONFDIR value.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-08 11:34:25 +00:00
John Ferlan
1d8b4f0592 valgrind: Adjust the suppression file 2013-02-07 14:08:14 -05:00
John Ferlan
9442d03c48 qemumonitortestutils: Resolve resource leaks found by Valgrind
When Valgrind runs the 'qemumonitorjsontest' it would claim that the
thread created is leaked. That's because the virThreadJoin won't get
called due to the 'running' flag being cleared.  In order to avoid that,
call virThreadJoin unconditionally at cleanup time.  Also noted that the
qemuMonitorTestWorker() didn't get the test mutex lock on the failure path.

The incoming and outgoing buffers allocated by qemuMonitorTestIO() and
qemuMonitorTestAddReponse() were never VIR_FREE()'d in qemuMonitorTestFree().
2013-02-07 14:08:14 -05:00
John Ferlan
3f5250ff8e qemumonitorjsontest: Resolve resource leaks found by Valgrind
The 'package' string returned by qemuMonitorGetVersion() needs to
be VIR_FREE()'d.

testQemuMonitorJSONGetMachines(), testQemuMonitorJSONGetCPUDefinitions(),
and testQemuMonitorJSONGetCommands() did not VIR_FREE() the array and
array elements allocated by their respective qemuMonitorGet* routines.
2013-02-07 14:08:14 -05:00
John Ferlan
785d6bc58a qemuxml2argvtest: Resolve resource leaks found by Valgrind
Valgrind deterimined that fakeSecretGetValue() was using the secret
value without checking validity.  Returning NULL causes the caller
to emit a message and results in failure.

Additionally commit 'b090aa7d' changes leaked vncSASLdir and vncTLSx509certdir
2013-02-07 14:08:14 -05:00
John Ferlan
0eb62708a7 virnettlscontexttest: Resolve memory leak found by Valgrind
testTLSDerEncode() will allocate memory for der.data, it wasn't VIR_FREE()'d.
also don't initialized der to use static buffer.
2013-02-07 14:08:13 -05:00
Eric Blake
98fc0137f1 bitmap: add way to find next clear bit
We had an easy way to iterate set bits, but not for iterating
cleared bits.

* src/util/virbitmap.h (virBitmapNextClearBit): New prototype.
* src/util/virbitmap.c (virBitmapNextClearBit): Implement it.
* src/libvirt_private.syms (bitmap.h): Export it.
* tests/virbitmaptest.c (test4): Test it.
2013-02-05 16:23:14 -07:00
Eric Blake
3a9382ca2a tests: reserve more fds for commandtest
Commit 39c77fe triggered random failures, depending on the platform
and what other fds leak into the testsuite (for me, it passed on
RHEL 6 but failed on Fedora 18).  The reason was that we were
expecting an fd that fell outside of our reserved range.  By reserving
a larger range, the test once again passes on all platforms.

* tests/commandtest.c (mymain): Reserve enough fds.
2013-02-05 10:47:00 -07:00
Daniel P. Berrange
b090aa7d55 Introduce a virQEMUDriverConfigPtr object
Currently the virQEMUDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virQEMUDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virQEMUDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.

NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-05 15:49:25 +00:00
Michal Privoznik
f0154959b3 tests: Create test for virCommandDoAsyncIO
This is just a basic test, so we don't break virCommand in the
future. A "Hello world\n" string is written to commanhelper,
which copies input to stdout and stderr where we read it from.
Then the read strings are compared with expected values.
2013-02-05 15:45:21 +01:00
Michal Privoznik
39c77fe586 Introduce event loop to commandtest
This is just preparing environment for the next patch, which is
going to need an event loop.
2013-02-05 15:45:21 +01:00
Eric Blake
949ebc3022 tests: add a comment about our fake qmp
While testing QMP, I used a simple qemu session of
'qemu-kvm -M none -nodefaults -nographic -qmp stdio'
for some experiments.  But it took me far too long to remember
the magic invocation to unlock QMP into accepting normal commands.
While I was able to grep libvirt sources and easily find where
libvirt expects the normal "QMP" greeting, I could not find the
proper reply to that greeting nearby.

Reading the testsuite didn't help either, since there we don't
emulate the mandatory handshake.  But since my grep hit the
testsuite, adding a bit of documentation will make it much easier
to jog my memory in the future.

* tests/qemumonitortestutils.c (QEMU_JSON_GREETING): Mention that
the normal counterpart reply is skipped.
2013-01-31 10:15:33 -07:00
Jiri Denemark
d6c8597046 tests: Don't build securityselinuxlabeltest without qemu
Sources for securityselinuxlabeltest are only defined if qemu driver is
enabled so we should not try to build the test if qemu driver is
disabled.
2013-01-31 10:32:43 +01:00
John Ferlan
46b1d8cf7a Enforce return check on virAsprintf() calls
Way back when I started making changes for Coverity messages my first set
were to a bunch of CHECKED_RETURN errors.  In particular virAsprintf() had
a few callers that Coverity noted didn't check their return (although some
did check if the buffer being printed to was NULL or not).

It was suggested at the time as a further patch an ATTRIBUTE_RETURN_CHECK
should be added to virAsprintf(), see:

https://www.redhat.com/archives/libvir-list/2013-January/msg00120.html

This patch does that and fixes a few more instances not found by Coverity
that failed the check.
2013-01-30 14:42:22 -07:00
Josh Durgin
c1509ab47e qemu: escape ipv6 for rbd network disk hosts
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to qemu.

Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.

Acked-by: Osier Yang <jyang@redhat.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2013-01-25 11:48:24 +08:00
John Ferlan
9ff3876cc8 virbitmaptest: Resolve Coverity errors
test1: Need to check for bitmap before using as well as free it properly
test2: need to check for bitsString2 before using it.
2013-01-23 15:02:06 +01:00
John Ferlan
31e0de1a85 tests: Remove VIR_FREE() on static/stack buffer (der.data) 2013-01-23 15:02:06 +01:00
Alon Levy
55bfd020d8 qemu: Support ram bar size for qxl devices
Adds a "ram" attribute globally to the video.model element, that changes
the resulting qemu command line only if video.type == "qxl".

<video>
  <model type='qxl' ram='65536' vram='65536' heads='1'/>
</video>

That attribute gets a default value of 64*1024. The schema is unchanged
for other video element types.

The resulting qemu command line change is the addition of

-global qxl-vga.ram_size=<ram>*1024

or

-global qxl.ram_size=<ram>*1024

For the main and secondary qxl devices respectively.

The default for the qxl ram bar is 64*1024 kilobytes (the same as the
default qxl vram bar size).
2013-01-22 10:40:45 -07:00
John Ferlan
35c30522a5 tests: Need to initialize 'test' properly on error path
In the error path, the test buffer is free'd, but due to how the free
routine is written the 'test' buffer pointer does not return to the caller
as NULL and then the free'd buffer address is returned to the caller.
2013-01-22 17:29:26 +01:00
John Ferlan
3e8502165f commandtest: Need to initialize 'errbuf'
It was possible to call VIR_FREE in cleanup prior to initialization
2013-01-22 17:29:25 +01:00
John Ferlan
ff4eac595f virnetsockettest: Need to initialize 'path'
It was possible to call VIR_FREE in cleanup prior to initialization
2013-01-22 17:29:25 +01:00
Eric Blake
f403bdc189 build: fix build on BSD
A build on FreeBSD failed with:
util/virportallocator.c:108: error: storage size of 'addr' isn't known
util/virportallocator.c:123: error: 'INADDR_ANY' undeclared (first use in this function)

It turns out that while POSIX allows sockaddr_in to leak in through
<arpa/inet.h> (the way Linux does it), it is not mandatory, and
conforming applications are required to get it through <netinet/in.h>.

* src/util/virportallocator.c: Include header for struct
sockaddr_in.
* tests/virportallocatortest.c: Likewise.
2013-01-17 16:39:10 -07:00
Daniel P. Berrange
da5a8aee2b Avoid integer wrap on remotePortMax in QEMU driver
The QEMU driver default max port is 65535, but it then increments
this by 1 to 65536. This maps to 0 in an unsigned short :-( This
was apparently done so that for() loops could use "< max" instead
of "<= max". Remove this insanity and just make the loop do the
right thing.
2013-01-17 13:52:33 +00:00
Daniel P. Berrange
9c9d4d32d3 Add a port allocator class
Introduce a virPortAllocator for managing TCP port allocations.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-16 11:02:58 +00:00
Daniel P. Berrange
325b02b5a3 Convert virDomainObj, qemuAgent, qemuMonitor, lxcMonitor to virObjectLockable
The  virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes
all require a mutex, so can be switched to use virObjectLockable

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-16 11:02:58 +00:00
John Ferlan
7ae3f2d53d securityselinuxhelper.c: Don't try to include xattr.h if not available
Commit 907a39e7 missed adding the WITH_ATTR around #include <attr/xattr.h>
resulting in a build failure:

  CC     libsecurityselinuxhelper_la-securityselinuxhelper.lo
  securityselinuxhelper.c:27:24: fatal error: attr/xattr.h: No such file or directory
  compilation terminated.
  make[2]: *** [libsecurityselinuxhelper_la-securityselinuxhelper.lo] Error 1
  make[2]: Leaving directory `/home/jferlan/libvirt.work/tests'
  make[1]: *** [all-recursive] Error 1
  make[1]: Leaving directory `/home/jferlan/libvirt.work'
  make: *** [all] Error 2
2013-01-14 21:00:51 +01:00
Daniel P. Berrange
7184af1364 Add missing stubs to securityselinuxhelper.c
Make sure we override both the raw and non-raw stubs in
securityselinuxhelper.c. Also add diagnostics if
securityselinuxlabeltest fails a test item
2013-01-14 18:34:49 +00:00
Daniel P. Berrange
907a39e735 Add a test suite for validating SELinux labelling
There are many aspects of the guest XML which result in the
SELinux driver applying file labelling. With the increasing
configuration options it is desirable to test this behaviour.
It is not possible to assume that the test suite has the
ability to set SELinux labels. Most filesystems though will
support extended attributes. Thus for the purpose of testing,
it is possible to extend the existing LD_PRELOAD hack to
override setfilecon() and getfilecon() to simply use the
'user.libvirt.selinux' attribute for the sake of testing.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:40:04 +00:00
Daniel P. Berrange
bccd4a8cbc Rename HAVE_GNUTLS to WITH_GNUTLS 2013-01-14 13:26:47 +00:00
Daniel P. Berrange
321a7d53f3 Convert HAVE_SASL to WITH_SASL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Daniel P. Berrange
49a1c16027 Convert HAVE_YAJL into WITH_YAJL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:22 +00:00
Guannan Ren
fc66c1603c qemu: add usb-net caps flag
QEMU_CAPS_DEVICE_USB_NET /* -device usb-net */
2013-01-10 21:56:31 +08:00
Guannan Ren
f8d478b6df qemu: add usb-serial caps flag
QEMU_CAPS_DEVICE_USB_SERIAL /* -device usb-serial */
2013-01-10 21:26:50 +08:00
John Ferlan
5a4af2a7d6 tests: Remove remnants of removing the fake emulator output
Coverity determined that 'emulator' could no longer be set and determined the
code was dead.  Looking through the history, I discovered commit-id ed769e18
removed code originally added by commit-id 9237e955 and further modified by
commit-id 6a7e7c4f.
2013-01-08 17:19:32 -07:00
Daniel P. Berrange
f587c27768 Make TLS support conditional
Add checks for existence of GNUTLS and automatically disable
it if not found.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-08 20:57:31 +00:00
John Ferlan
51811e4161 Resolve COPY_PASTE error found by Coverity
Fix copy-paste error doing handshake.

The clientShake was not set to true, thus we'd potentially never leave
the handshake while loop.
2013-01-08 16:21:46 +01:00
J.B. Joret
db2b6861dc S390: Enable SCLP Console in QEMU driver
This is the QEMU backend code for the SCLP console support.
It includes SCLP capability detection, QEMU command line generation
and a test case.

Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-01-08 11:37:52 +01:00
Osier Yang
535aed56a2 conf: Parse and format the new XML
Like "rawio", "sgio" is only allowed for block disk of device
type "lun".

It doesn't default disk->sgio to "filtered" when parsing, as
it won't be able to distinguish explicitly requested "filtered"
and a default "filtered" in driver then. We have to error out for
explicit request when the kernel doesn't support the new sysfs
knob "unpriv_sgio", however, for defaulted "filtered", we can
just ignore it if the kernel doesn't support "unpriv_sgio".
2013-01-07 21:38:43 +08:00
John Ferlan
7ac12d84d0 tests: check and handle error for virAsprintf() calls 2013-01-04 10:57:20 -07:00
John Ferlan
0c6e95fe78 Check return on mkdir for LOCKSPACE_DIR 2013-01-04 10:57:09 -07:00
Daniel P. Berrange
f24404a324 Rename virterror.c virterror_internal.h to virerror.{c,h} 2012-12-21 11:19:50 +00:00
Daniel P. Berrange
556cf5f617 Rename xml.{c,h} to virxml.{c,h} 2012-12-21 11:19:50 +00:00
Daniel P. Berrange
44f6ae27fe Rename util.{c,h} to virutil.{c,h} 2012-12-21 11:19:49 +00:00
Daniel P. Berrange
404174cad3 Rename threads.{c,h} to virthread.{c,h} 2012-12-21 11:19:49 +00:00
Daniel P. Berrange
88ba722c12 Rename sysinfo.{c,h} to virsysinfo.{c,h} 2012-12-21 11:19:48 +00:00
Daniel P. Berrange
fde9df8dcc Rename stats_linux.{c,h} to virstatslinux.{c,h} 2012-12-21 11:19:48 +00:00
Daniel P. Berrange
ab9b7ec2f6 Rename memory.{c,h} to viralloc.{c,h} 2012-12-21 11:17:14 +00:00
Daniel P. Berrange
936d95d347 Rename logging.{c,h} to virlog.{c,h} 2012-12-21 11:17:14 +00:00
Daniel P. Berrange
6a095d0851 Rename json.{c,h} to virjson.{c,h} 2012-12-21 11:17:13 +00:00
Daniel P. Berrange
4d6050a8eb Rename event_poll.{c,h} to vireventpoll.{c,h} 2012-12-21 11:17:13 +00:00
Daniel P. Berrange
4857b9c3a9 Rename event.{c,h} to virevent.{c,h}
Since the event APIs are now in the public header, no internal
code should include virevent.h
2012-12-21 11:17:13 +00:00
Daniel P. Berrange
0f8454101d Rename conf.{c,h} to virconf.{c,h} 2012-12-21 11:17:13 +00:00
Daniel P. Berrange
04d9510f50 Rename command.{c,h} to vircommand.{c,h} 2012-12-21 11:17:13 +00:00
Daniel P. Berrange
2005f7b552 Rename buf.{c,h} to virbuffer.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-21 11:17:12 +00:00
Daniel P. Berrange
a27e4fbb72 Rename bitmap.{c,h} to virbitmap.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-21 11:17:12 +00:00
Li Zhang
99c5545693 Add sysinfo data and enable virSysinfoRead test case for POWER
This patch is to enable virSysinfoRead test case for POWER,
and provide sysinfo data on POWER.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-12-20 14:49:20 -07:00
Daniel P. Berrange
32df483f1d Fix SELinux security label test
If securityselinuxtest was run on a system with newer SELinux
policy it would fail, due to using svirt_tcg_t instead of
svirt_t. Fixing the domain type to be KVM avoids this issue.
2012-12-19 10:05:17 +00:00
Daniel P. Berrange
392c192240 Fix test cases for virArch changes 2012-12-18 19:32:23 +00:00
Daniel P. Berrange
aae0fc2a92 Add support for <hostdev mode="capabilities">
The <hostdev> device type has long had a redundant "mode"
attribute, which has always been "subsys". This finally
introduces a new mode "capabilities", which will be used
by the LXC driver for device assignment. Since container
based virtualization uses a single kernel, the idea of
assigning physical PCI devices doesn't make sense. It is
still reasonable to assign USB devices, but for assigning
arbitrary nodes in /dev, the new 'capabilities' mode is
to be used.

The first capability support is 'storage', which is for
assignment of block devices. Functionally this is really
pretty similar to the <disk> support. The only difference
is the device node name is identical in both host and
container namespaces.

    <hostdev mode='capabilities' type='storage'>
      <source>
        <block>/dev/sdf1</block>
      </source>
    </hostdev>

The second capability support is 'misc', which is for
assignment of character devices. There is no existing
parallel to this. Again the device node is the same
inside & outside the container.

    <hostdev mode='capabilities' type='misc'>
      <source>
        <char>/dev/input/event3</char>
      </source>
    </hostdev>

The reason for keeping the char & storage devices
separate in the domain XML, is to mirror the split
in the node device XML. NB the node device XML does
not yet report character devices, but that's another
new patch to come

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-17 17:50:50 +00:00
Viktor Mihajlovski
347a712ab1 tests: Add tests for sysinfo
Test cases for virSysinfoRead. Initially, there are tests for
x86 (DMI based) and s390 (/proc/... based).
In lack of PPC data, I have stubbed out the test for it, but it
can be added with a minimal effort.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-12-17 17:37:17 +00:00
Guannan Ren
ed6fc41b9c tests: add one -device video device testcase
The testcase is for testing non-fixed PCI address for primary
video device and using video args to -deivce qemu option.
2012-12-17 14:02:58 +08:00
Guannan Ren
aa51202b72 qemu: use newer -device video device in qemu commandline
'-device VGA' maps to '-vga std'
'-device cirrus-vga' maps to '-vga cirrus'
'-device qxl-vga' maps to '-vga qxl'
             (there is also '-device qxl' for secondary devices)
'-device vmware-svga' maps to '-vga vmware'

For qemu(>=1.2), we can use -device to replace -vga for video
device. For the primary video device, the patch tries to use 0x2
slot for matching old qemu. If the 0x2 slot is allocated already,
the addr property could help for using any available slot.
For qemu(< 1.2), we keep using -vga for primary device.
2012-12-17 14:02:50 +08:00
Guannan Ren
4c993d8ab5 qemu: add qemu vga devices caps and one cap to mark them usable
QEMU_CAPS_DEVICE_QXL          -device qxl
QEMU_CAPS_DEVICE_VGA          -device VGA
QEMU_CAPS_DEVICE_CIRRUS_VGA   -device cirrus-vga
QEMU_CAPS_DEVICE_VMWARE_SVGA  -device vmware-svga

QEMU_CAPS_DEVICE_VIDEO_PRIMARY  /* safe to use -device XXX
                                 for primary video device */

Fix a typo in qemuCapsObjectTypes, the string 'qxl' here
should be -device qxl rather than -vga [...|qxl|..]
2012-12-17 13:55:50 +08:00
Laine Stump
d66eb78667 network: prevent dnsmasq from listening on localhost
This patch resolves the problem reported in:

   https://bugzilla.redhat.com/show_bug.cgi?id=886663

The source of the problem was the fix for CVE 2011-3411:

   https://bugzilla.redhat.com/show_bug.cgi?id=833033

which was originally committed upstream in commit
753ff83a50. That commit improperly
removed the "--except-interface lo" from dnsmasq commandlines when
--bind-dynamic was used (based on comments in the latter bug).

It turns out that the problem reported in the CVE could be eliminated
without removing "--except-interface lo", and removing it actually
caused each instance of dnsmasq to listen on localhost on port 53,
which created a new problem:

If another instance of dnsmasq using "bind-interfaces" (instead of
"bind-dynamic") had already been started (or if another instance
started later used "bind-dynamic"), this wouldn't have any immediately
visible ill effects, but if you tried to start another dnsmasq
instance using "bind-interfaces" *after* starting any libvirt
networks, the new dnsmasq would fail to start, because there was
already another process listening on port 53.

(Subsequent to the CVE fix, another patch changed the network driver
to put dnsmasq options in a conf file rather than directly on the
dnsmasq commandline, but preserved the same options.)

This patch changes the network driver to *always* add
"except-interface=lo" to dnsmasq conf files, regardless of whether we use
bind-dynamic or bind-interfaces. This way no libvirt dnsmasq instances
are listening on localhost (and the CVE is still fixed).

The actual code change is miniscule, but must be propogated through all
of the test files as well.
2012-12-13 12:15:03 -05:00
Eric Blake
7339bc4ced network: match xml warning message
I noticed that /var/lib/libvirt/dnsmasq/*.conf used the wrong word;
it was intended to match the wording in src/util/xml.c.

* src/network/bridge_driver.c (networkDnsmasqConfContents): Fix typo.
* tests/networkxml2confdata/*.conf: Update accordingly.
2012-12-12 15:12:58 -07:00
Serge Hallyn
a4e44e674e add vnc unix sockets to apparmor policy
When using vnc gaphics over a unix socket, virt-aa-helper needs to provide
access for the qemu domain to access the sockfile.

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
2012-12-11 14:32:39 -07:00
Serge Hallyn
88bd1a644b add security hook for permitting hugetlbfs access
When a qemu domain is backed by huge pages, apparmor needs to grant the domain
rw access to files under the hugetlbfs mount point.  Add a hook, called in
qemu_process.c, which ends up adding the read-write access through
virt-aa-helper.  Qemu will be creating a randomly named file under the
mountpoint and unlinking it as soon as it has mmap()d it, therefore we
cannot predict the full pathname, but for the same reason it is generally
safe to provide access to $path/**.

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
2012-12-11 14:27:20 -07:00
Gene Czarcinski
8b32c80df0 network: put dnsmasq parameters in conf-file instead of command line
This patch changes how parameters are passed to dnsmasq.  Instead of
being on the command line, the parameters are put into a file (one
parameter per line) and a commandline --conf-file= specifies the
location of the file.  The file is located in the same directory as
the leases file.

Putting the dnsmasq parameters into a configuration file
allows them to be examined and more easily understood than
examining the command lines displayed by "ps ax".  This is
especially true when a number of networks have been started.

When the use of dnsmasq was originally done, the required command line
was simple, but it has gotten more complicated over time and will
likely become even more complicated in the future.

Note: The test conf files have all been renamed .conf instead of
.argv, and tests/networkxml2xmlargvdata was moved to
tests/networkxml2xmlconfdata.
2012-12-11 05:49:45 -05:00
Gene Czarcinski
2d5cd1d724 network: add support for DHCPv6
The DHCPv6 support includes IPV6 dhcp-range and dhcp-host for one
IPv6 subnetwork on one interface.  This support will only work
if dnsmasq version >= 2.64; otherwise an error occurs if
dhcp-range or dhcp-host is specified for an IPv6 address.

Essentially, this change provides the same DHCP support for IPv6
that has been available for IPv4.

With dnsmasq >= 2.64, support for the RA service is also now provided
by dnsmasq (radvd is no longer used/started). (Although at least one
version of dnsmasq prior to 2.64 "supported" IPv6 Router
Advertisement, there were bugs (fixed in 2.64) that rendered it
unusable.)

Documentation and the network schema has been updated
to reflect the new support.
2012-12-11 05:49:45 -05:00
Osier Yang
b718ded39a qemu: Allow the user to specify vendor and product for disk
QEMU supports setting vendor and product strings for disk since
1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch
exposes it with new XML elements <vendor> and <product> of disk
device.
2012-12-07 16:53:27 +08:00
Gene Czarcinski
705e67d40b network: allow guest to guest IPv6 without gateway definition
This patch adds the capability for virtual guests to do IPv6
communication via a virtual network interface with no IPv6 (gateway)
addresses specified.  This capability has always been enabled by
default for IPv4, but disabled for IPv6 for security concerns, and
because it requires the ip6tables command to be operational (which
isn't the case on a system with the ipv6 module completely disabled).

This patch adds a new attribute "ipv6" at the toplevel of a <network>
object.  If ipv6='yes', the extra ip6tables rules required to permite
inter-guest communications are added when the network is started. If
it is 'no', or not present, those rules will not be added; thus the
default behavior doesn't change, so there should be no compatibility
issues with any existing installations.

Note that virtual guests cannot communication with the virtualization
host via this interface, because the following kernel tunable has
been set:

   net.ipv6.conf.<bridge_interface_name>.disable_ipv6 = 1

This assures that the bridge interface will not have an IPv6
link-local (fe80::) address.

To control this behavior so that it is not enabled by default, the parameter
ipv6='yes' on the <network> statement has been added.

Documentation related to this patch has been updated.
The network schema has also been updated.
2012-12-05 14:58:32 -05:00
Daniel P. Berrange
76c1fd33c8 Introduce APIs for splitting/joining strings
This introduces a few new APIs for dealing with strings.
One to split a char * into a char **, another to join a
char ** into a char *, and finally one to free a char **

There is a simple test suite to validate the edge cases
too. No more need to use the horrible strtok_r() API,
or hand-written code for splitting strings.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-30 20:05:43 +00:00
Laine Stump
753ff83a50 network: use dnsmasq --bind-dynamic when available
This bug resolves CVE-2012-3411, which is described in the following
bugzilla report:

  https://bugzilla.redhat.com/show_bug.cgi?id=833033

The following report is specifically for libvirt on Fedora:

  https://bugzilla.redhat.com/show_bug.cgi?id=874702

In short, a dnsmasq instance run with the intention of listening for
DHCP/DNS requests only on a libvirt virtual network (which is
constructed using a Linux host bridge) would also answer queries sent
from outside the virtualization host.

This patch takes advantage of a new dnsmasq option "--bind-dynamic",
which will cause the listening socket to be setup such that it will
only receive those requests that actually come in via the bridge
interface. In order for this behavior to actually occur, not only must
"--bind-interfaces" be replaced with "--bind-dynamic", but also all
"--listen-address" options must be replaced with a single
"--interface" option. Fully:

   --bind-interfaces --except-interface lo --listen-address x.x.x.x ...

(with --listen-address possibly repeated) is replaced with:

   --bind-dynamic --interface virbrX

Of course libvirt can't use this new option if the host's dnsmasq
doesn't have it, but we still want libvirt to function (because the
great majority of libvirt installations, which only have mode='nat'
networks using RFC1918 private address ranges (e.g. 192.168.122.0/24),
are immune to this vulnerability from anywhere beyond the local subnet
of the host), so we use the new dnsmasqCaps API to check if dnsmasq
supports the new option and, if not, we use the "old" option style
instead. In order to assure that this permissiveness doesn't lead to a
vulnerable system, we do check for non-private addresses in this case,
and refuse to start the network if both a) we are using the old-style
options, and b) the network has a publicly routable IP
address. Hopefully this will provide the proper balance of not being
disruptive to those not practically affected, and making sure that
those who *are* affected get their dnsmasq upgraded.

(--bind-dynamic was added to dnsmasq in upstream commit
54dd393f3938fc0c19088fbd319b95e37d81a2b0, which was included in
dnsmasq-2.63)
2012-11-29 15:02:39 -05:00
Laine Stump
719c2c7665 util: capabilities detection for dnsmasq
In order to optionally take advantage of new features in dnsmasq when
the host's version of dnsmasq supports them, but still be able to run
on hosts that don't support the new features, we need to be able to
detect the version of dnsmasq running on the host, and possibly
determine from the help output what options are in this dnsmasq.

This patch implements a greatly simplified version of the capabilities
code we already have for qemu. A dnsmasqCaps device can be created and
populated either from running a program on disk, reading a file with
the concatenated output of "dnsmasq --version; dnsmasq --help", or
examining a buffer in memory that contains the concatenated output of
those two commands. Simple functions to retrieve capabilities flags,
the version number, and the path of the binary are also included.

bridge_driver.c creates a single dnsmasqCaps object at driver startup,
and disposes of it at driver shutdown. Any time it must be used, the
dnsmasqCapsRefresh method is called - it checks the mtime of the
binary, and re-runs the checks if the binary has changed.

networkxml2argvtest.c creates 2 "artificial" dnsmasqCaps objects at
startup - one "restricted" (doesn't support --bind-dynamic) and one
"full" (does support --bind-dynamic). Some of the test cases use one
and some the other, to make sure both code pathes are tested.
2012-11-29 15:02:39 -05:00
Daniel P. Berrange
4738c2a7e7 Replace 'struct qemud_driver *' with virQEMUDriverPtr
Remove the obsolete 'qemud' naming prefix and underscore
based type name. Introduce virQEMUDriverPtr as the replacement,
in common with LXC driver naming style
2012-11-28 18:17:25 +00:00
Guannan Ren
237629d204 bitmap: fix typo to use UL type of integer constant in virBitmapIsAllSet
This bug leads to getting incorrect vcpupin information via
qemudDomainGetVcpuPinInfo() API when the number of maximum
cpu on a host falls into a range such as 31 < ncpus < 64.

gcc warning:
left shift count >= width of type

The following bug is such the case
https://bugzilla.redhat.com/show_bug.cgi?id=876415
2012-11-28 18:30:28 +08:00
Harsh Prateek Bora
f97a569944 tests: Add tests for gluster protocol based network disks support
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
2012-11-27 10:19:22 +01:00
Ján Tomko
5efacd7813 build: fix build --without-network
bridge_driver.h: silence gcc warnings:
statement with no effect [-Wunused-value]
unused variable 'net' [-Wunused-variable]

virdrivermoduletest.c: don't require network driver module
if it hasn't been built.
2012-11-26 14:01:23 +01:00
Michal Privoznik
a154f5f313 qemuhelpdata: Revert my 'fix'
I was convicted that space at EOL should no be there
even for qemu help data. Hence, I've removed one in
commit bb2f621611. However, it turns out we want
it exactly the way qemu produces it. So I should undo
my premature fix. A patch against qemu has been posted
as well.
2012-11-23 09:25:20 +01:00
Ján Tomko
bb2f621611 tests: update qemuhelptest data
Both generated with
qemu-system-x86_64 --help > qemu-1.2.0

qemu-system-x86_64 \
-device ? \
-device pci-assign,? \
-device virtio-blk-pci,? \
-device virtio-net-pci,? \
-device scsi-disk,? \
-device PIIX4_PM,? \
-device usb-redir,? \
-device ide-drive,? \
-device usb-host,? 2> qemu-1.2.0-device

It seems I missed a few -device flags when doing this last time and I
mixed up qemu and qemu-kvm.
2012-11-21 18:43:18 +01:00
Ján Tomko
c5834ec148 tests: add boot order for host and redirected USB to qemu argv test 2012-11-21 18:43:15 +01:00
Miloslav Trmač
37f7a1faf1 Add metadata to virLogOutputFunc
... and update all users.  No change in functionality, the parameter
will be used in the next patch.

Signed-off-by: Miloslav Trmač <mitr@redhat.com>
2012-11-14 19:14:07 -07:00
Peter Krempa
e5aab47ab3 tests: Remove temporary directories in qemumonitorjsontest
qemumonitorjsontest creates a temporary directory to hold the socket
that is simulating the monitor socket. The directory containing the
socket wasn't disposed properly at the end of the test leaving garbage
in the temporary folder.
2012-11-13 09:32:15 +01:00
Peter Krempa
e25a32f3da tests: Fix qemumonitorjsontest deadlock when the machine is under load
When doing the qemumonitorjsontest on a machine under heavy load the
test tends to deadlock from time to time. This patch adds the hack to
break the event loop that is used in virsh.
2012-11-13 09:32:14 +01:00
Peter Krempa
7a791677b0 nodeinfotest: Add test data from a AMD bulldozer machine.
The AMD Bulldozer architecture uses so called "Clustered integer core
modules" that count both as threads and cores. This patch expects the
cpu to be detected using the new fallback condition otherwise twice the
number of processors would be detected.
2012-11-13 00:35:36 +01:00
Peter Krempa
86748976f1 nodeinfotest: Add test data for 2 processor host with broken NUMA
This test data was gathered on an AMD MagnyCours machine that reports it
has only one NUMA node although the hardware is consisting of 4. As
duplicate core id's are ignored the reported topology was bogous. This
should be fixed by the previous patch.

Reported and data provided by George-Cristian Bîrzan.
2012-11-13 00:35:36 +01:00
Viktor Mihajlovski
b1c88c1476 capabilities: defaultConsoleTargetType can depend on architecture
For S390, the default console target type cannot be of type 'serial'.
It is necessary to at least interpret the 'arch' attribute
value of the os/type element to produce the correct default type.

Therefore we need to extend the signature of defaultConsoleTargetType
to account for architecture. As a consequence all the drivers
supporting this capability function must be updated.

Despite the amount of changed files, the only change in behavior is
that for S390 the default console target type will be 'virtio'.

N.B.: A more future-proof approach could be to to use hypervisor
specific capabilities to determine the best possible console type.
For instance one could add an opaque private data pointer to the
virCaps structure (in case of QEMU to hold capsCache) which could
then be passed to the defaultConsoleTargetType callback to determine
the console target type.
Seems to be however a bit overengineered for the use case...

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-11-09 09:20:59 -07:00
Eric Blake
2cd4d8e506 virsh: add snapshot-create-as memspec support
External checkpoints could be created with snapshot-create, but
without libvirt supplying a default name for the memory file,
it is essential to add a new argument to snapshot-create-as to
allow the user to choose the memory file name.  This adds the
option --memspec [file=]name[,snapshot=type], where type can
be none, internal, or external.  For an example,

virsh snapshot-create-as $dom --memspec /path/to/file

is the shortest possible command line for creating an external
checkpoint, named after the current timestamp.

* tools/virsh-snapshot.c (vshParseSnapshotMemspec): New function.
(cmdSnapshotCreateAs): Use it.
* tests/virsh-optparse (test_url): Test it.
* tools/virsh.pod (snapshot-create-as): Document it.
2012-11-07 09:04:18 -07:00
Michal Privoznik
a95c9406a2 tests: Add test for controller order 2012-11-06 10:11:35 +01:00
Eric Blake
4201a7ea1c snapshot: new XML for external system checkpoint
Each <domainsnapshot> can now contain an optional <memory>
element that describes how the VM state was handled, similar
to disk snapshots.  The new element will always appear in
output; for back-compat, an input that lacks the element will
assume 'no' or 'internal' according to the domain state.

Along with this change, it is now possible to pass <disks> in
the XML for an offline snapshot; this also needs to be wired up
in a future patch, to make it possible to choose internal vs.
external on a per-disk basis for each disk in an offline domain.
At that point, using the --disk-only flag for an offline domain
will be able to work.

For some examples below, remember that qemu supports the
following snapshot actions:

qemu-img: offline external and internal disk
savevm: online internal VM and disk
migrate: online external VM
transaction: online external disk

=====
<domainsnapshot>
  <memory snapshot='no'/>
  ...
</domainsnapshot>

implies that there is no VM state saved (mandatory for
offline and disk-only snapshots, not possible otherwise);
using qemu-img for offline domains and transaction for online.

=====
<domainsnapshot>
  <memory snapshot='internal'/>
  ...
</domainsnapshot>

state is saved inside one of the disks (as in qemu's 'savevm'
system checkpoint implementation).  If needed in the future,
we can also add an attribute pointing out _which_ disk saved
the internal state; maybe disk='vda'.

=====
<domainsnapshot>
  <memory snapshot='external' file='/path/to/state'/>
  ...
</domainsnapshot>

This is not wired up yet, but future patches will allow this to
control a combination of 'virsh save /path/to/state' plus disk
snapshots from the same point in time.

=====

So for 1.0.1 (and later, as needed), I plan to implement this table
of combinations, with '*' designating new code and '+' designating
existing code reached through new combinations of xml and/or the
existing DISK_ONLY flag:

domain  memory  disk   disk-only | result
-----------------------------------------
offline omit    omit   any       | memory=no disk=int, via qemu-img
offline no      omit   any       |+memory=no disk=int, via qemu-img
offline omit/no no     any       | invalid combination (nothing to snapshot)
offline omit/no int    any       |+memory=no disk=int, via qemu-img
offline omit/no ext    any       |*memory=no disk=ext, via qemu-img
offline int/ext any    any       | invalid combination (no memory to save)
online  omit    omit   off       | memory=int disk=int, via savevm
online  omit    omit   on        | memory=no disk=default, via transaction
online  omit    no/ext off       | unsupported for now
online  omit    no     on        | invalid combination (nothing to snapshot)
online  omit    ext    on        | memory=no disk=ext, via transaction
online  omit    int    off       |+memory=int disk=int, via savevm
online  omit    int    on        | unsupported for now
online  no      omit   any       |+memory=no disk=default, via transaction
online  no      no     any       | invalid combination (nothing to snapshot)
online  no      int    any       | unsupported for now
online  no      ext    any       |+memory=no disk=ext, via transaction
online  int/ext any    on        | invalid combination (disk-only vs. memory)
online  int     omit   off       |+memory=int disk=int, via savevm
online  int     no/ext off       | unsupported for now
online  int     int    off       |+memory=int disk=int, via savevm
online  ext     omit   off       |*memory=ext disk=default, via migrate+trans
online  ext     no     off       |+memory=ext disk=no, via migrate
online  ext     int    off       | unsupported for now
online  ext     ext    off       |*memory=ext disk=ext, via migrate+transaction

* docs/schemas/domainsnapshot.rng (memory): New RNG element.
* docs/formatsnapshot.html.in: Document it.
* src/conf/snapshot_conf.h (virDomainSnapshotDef): New fields.
* src/conf/domain_conf.c (virDomainSnapshotDefFree)
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Manage new fields.
* tests/domainsnapshotxml2xmltest.c: New test.
* tests/domainsnapshotxml2xmlin/*.xml: Update existing tests.
* tests/domainsnapshotxml2xmlout/*.xml: Likewise.
2012-11-02 09:56:23 -06:00
Daniel P. Berrange
1c04f99970 Remove spurious whitespace between function name & open brackets
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-02 13:36:49 +00:00
Guido Günther
0e7fd31fb5 Create temporary dir for socket
to avoid ENAMETOOLONG:

https://buildd.debian.org/status/fetch.php?pkg=libvirt&arch=amd64&ver=1.0.0~rc1-1&stamp=1351453521
2012-10-30 19:16:57 +01:00
Peter Krempa
f88b076d17 nodeinfotest: Delete NUL bytes from test data
The test data contained extra \0 bytes after newlines probably due to a
kernel off-by-one bug.
2012-10-30 10:39:06 +01:00
Vladislav Bogdanov
81af5336ac qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
Eric Blake
0711c4b74d bitmap: add virBitmapCountBits
Sometimes it's handy to know how many bits are set.

* src/util/bitmap.h (virBitmapCountBits): New prototype.
(virBitmapNextSetBit): Use correct type.
* src/util/bitmap.c (virBitmapNextSetBit): Likewise.
(virBitmapSetAll): Maintain invariant of clear tail bits.
(virBitmapCountBits): New function.
* src/libvirt_private.syms (bitmap.h): Export it.
* tests/virbitmaptest.c (test2): Test it.
2012-10-25 11:19:23 -06:00
Doug Goldstein
2da776b1d6 qemu: Don't blindly assume VNC is supported
Currently it's assumed that qemu always supports VNC, however it is
definitely possible to compile qemu without VNC support so we should at
the very least check for it and handle that correctly.
2012-10-22 23:16:17 +08:00
Doug Goldstein
8be88034bf test: Don't assume VNC is always available
Several tests assume that VNC is always available and include it in
their configs and the expected command line. The tests have nothing to
do with graphics display so they shouldn't rely on VNC.
2012-10-22 23:16:11 +08:00
Laine Stump
1cb1f9dabf network: always create dnsmasq hosts and addnhosts files, even if empty
This fixes the problem reported in:

  https://bugzilla.redhat.com/show_bug.cgi?id=868389

Previously, the dnsmasq hosts file (used for static dhcp entries, and
addnhosts file (used for additional dns host entries) were only
created/referenced on the dnsmasq commandline if there was something
to put in them at the time the network was started. Once we can update
a network definition while it's active (which is now possible with
virNetworkUpdate), this is no longer a valid strategy - if there were
0 dhcp static hosts (resulting in no reference to the hosts file on the
commandline), then one was later added, the commandline wouldn't have
linked dnsmasq up to the file, so even though we create it, dnsmasq
doesn't pay any attention.

The solution is to just always create these files and reference them
on the dnsmasq commandline (almost always, anyway). That way dnsmasq
can notice when a new entry is added at runtime (a SIGHUP is sent to
dnsmasq by virNetworkUdpate whenever a host entry is added or removed)

The exception to this is that the dhcp static hosts file isn't created
if there are no lease ranges *and* no static hosts. This is because in
this case dnsmasq won't be setup to listen for dhcp requests anyway -
in that case, if the count of dhcp hosts goes from 0 to 1, dnsmasq
will need to be restarted anyway (to get it listening on the dhcp
port). Likewise, if the dhcp hosts count goes from 1 to 0 (and there
are no dhcp ranges) we need to restart dnsmasq so that it will stop
listening on port 67. These special situations are handled in the
bridge driver's networkUpdate() by checking for ((bool)
nranges||nhosts) both before and after the update, and triggering a
dnsmasq restart if the before and after don't match.
2012-10-20 21:29:19 -04:00
Eric Blake
41e0edaf84 storage: treat 'aio' like 'raw' at parse time
We have historically allowed 'aio' as a synonym for 'raw' for
back-compat to xen, but since a future patch will move to using
an enum value, we have to pick one to be our preferred output
name.  This is a slight change in the output XML, but the sexpr
and xm outputs should still be identical, and the input XML can
still use either form.

* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Move aio
back-compat...
(virDomainDiskDefParseXML): ...to parse time.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenFormatSxprDisk): ...and
to output time.
* src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise.
* tests/sexpr2xmldata/sexpr2xml-*.xml: Update tests.
2012-10-19 17:35:09 -06:00
Peter Krempa
09f10a12be qemu: Add support for HyperV Enlightenment feature "relaxed"
This patch adds QEMU support for the "relaxed" feature implemented by
previous patch.
2012-10-18 12:22:50 +02:00
Daniel P. Berrange
eca72d4759 Introduce an internal API for handling file based lockspaces
The previously introduced virFile{Lock,Unlock} APIs provide a
way to acquire/release fcntl() locks on individual files. For
unknown reason though, the POSIX spec says that fcntl() locks
are released when *any* file handle referring to the same path
is closed. In the following sequence

  threadA: fd1 = open("foo")
  threadB: fd2 = open("foo")
  threadA: virFileLock(fd1)
  threadB: virFileLock(fd2)
  threadB: close(fd2)

you'd expect threadA to come out holding a lock on 'foo', and
indeed it does hold a lock for a very short time. Unfortunately
when threadB does close(fd2) this releases the lock associated
with fd1. For the current libvirt use case for virFileLock -
pidfiles - this doesn't matter since the lock is acquired
at startup while single threaded an never released until
exit.

To provide a more generally useful API though, it is necessary
to introduce a slightly higher level abstraction, which is to
be referred to as a "lockspace".  This is to be provided by
a virLockSpacePtr object in src/util/virlockspace.{c,h}. The
core idea is that the lockspace keeps track of what files are
already open+locked. This means that when a 2nd thread comes
along and tries to acquire a lock, it doesn't end up opening
and closing a new FD. The lockspace just checks the current
list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY.

NB, the API as it stands is designed on the basis that the
files being locked are not being otherwise opened and used
by the application code. One approach to using this API is to
acquire locks based on a hash of the filepath.

eg to lock /var/lib/libvirt/images/foo.img the application
might do

   virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks");
   lockname = md5sum("/var/lib/libvirt/images/foo.img");
   virLockSpaceAcquireLock(lockspace, lockname);

NB, in this example, the caller should ensure that the path
is canonicalized before calculating the checksum.

It is also possible to do locks directly on resources by
using a NULL lockspace directory and then using the file
path as the lock name eg

   virLockSpacePtr lockspace = virLockSpaceNew(NULL);
   virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img");

This is only safe to do though if no other part of the process
will be opening the files. This will be the case when this
code is used inside the soon-to-be-reposted virlockd daemon

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-10-16 15:45:55 +01:00
Martin Kletzander
59952932f5 conf: add test for boot dev and order
Add test for 280b8c9e7c.
2012-10-16 12:25:32 +02:00
Martin Kletzander
9674f2c637 selinux: Use raw contexts
We are currently able to work only with non-translated SELinux
contexts, but we are using functions that work with translated
contexts throughout the code.  This patch swaps all SELinux context
translation relative calls with their raw sisters to avoid parsing
problems.

The problems can be experienced with mcstrans for example.  The
difference is that if you have translations enabled (yum install
mcstrans; service mcstrans start), fgetfilecon_raw() will get you
something like 'system_u:object_r:virt_image_t:s0', whereas
fgetfilecon() will return 'system_u:object_r:virt_image_t:SystemLow'
that we cannot parse.

I was trying to confirm that the _raw variants were here since the dawn of
time, but the only thing I see now is that it was imported together in
the upstream repo [1] from svn, so before 2008.

Thanks Laurent Bigonville for finding this out.

[1] http://oss.tresys.com/git/selinux.git
2012-10-12 17:54:09 +02:00
Ján Tomko
149c87b49d Various typos and misspellings 2012-10-12 00:03:43 +02:00
Jiri Denemark
844cdf22e6 qemu: Fix QMP detection of QXL graphics
With the recent introduction of QMP capabilities probing, libvirt failed
to detect support for QXL graphics in QEMU 1.2 and newer. In addition to
fixing that, this patch also causes libvirt to detect QXL support for
qemu-kvm-0.13.0, which doesn't advertise it in -help output but mentions
it in device list. Since qemu-kvm-0.13.0 supported -spice, it looks like
not having qxl in -help was a bug.
2012-10-09 11:42:05 +02:00
Martin Kletzander
5d692cc714 fix kvm_pv_eoi with kvmclock
When both kvmclock and kvm_pv_eoi are configured (either disabled or
enabled) libvirt will generate invalid CPU specification due to the
fact that even though kvmclock causes the CPU to be specified, it
doesn't set have_cpu flag to true (and the new kvm_pv_eoi as well).
This patch fixes the issue and adds a test exactly for that to show
that it is fixed correctly (and also to keep it that way in the future
of course).
2012-10-08 20:13:55 +02:00
Daniel P. Berrange
b073fe40db Refactor qemuCapsParseDeviceStr to work from data tables
Currently the qemuCapsParseDeviceStr method has a bunch of open
coded string searches/comparisons to detect devices and their
properties. Soon this data will be obtained from QMP queries
instead of -device help output. Maintaining the list of device
and properties in two places is undesirable. Thus the existing
qemuCapsParseDeviceStr() method needs to be refactored to
separate the device types and properties from the actual
search code.

Thus the -device help output is now parsed to construct a
list of device names, and device properties. These are then
checked against a set of datatables to set the capability
flags

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-28 11:25:49 +01:00
Daniel P. Berrange
e8fd8757c8 Change logging category parameter into an enum
The 'const char *category' parameter only has a few possible
values now that the filename has been separated. Turn this
parameter into an enum instead.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-28 10:39:28 +01:00
Daniel P. Berrange
0225c566f4 Include filename explicitly in logging APIs
Currently the logging APIs have a 'const char *category' parameter
which indicates where the log message comes from. This is typically
a combination of the __FILE__ string and other prefix. Split the
__FILE__ off into a dedicated parameter so it can passed to the
log outputs

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-28 10:34:14 +01:00
Daniel P. Berrange
4764a6c5a3 s/int/virLogDestination/ in logging code
The log destinations are an enum, but most of the code was
just using a plain 'int' for function params / variables.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-28 10:22:13 +01:00
Daniel P. Berrange
2dd77cd1ff s/long long/size_t/ for file line numbers in logging code
The __LINE__ macro value is specified to fit in the size_t
type, so use that instead of 'long long' in the logging code

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-28 10:17:02 +01:00
Daniel P. Berrange
de29867e22 s/int/virLogPriority/ in logging code
The log priority levels are an enum, but most of the code was
just using a plain 'int' for function params / variables.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-28 10:10:47 +01:00
Miloslav Trmač
a5fa3322c8 Pass the "raw" log message to each virLogOutputFunc
In addition to the preformatted text line, pass the raw message as well,
to allow the output functions to use a different output format.

Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 12:46:26 +01:00
Daniel P. Berrange
c70a6154b6 Add a qemuMonitorGetCommands() method for QMP query-commands command
Add a new qemuMonitorGetCPUCommands() method to support invocation
of the 'query-commands' JSON monitor command. No HMP equivalent
is required, since this will only be used when JSON is available

The existing qemuMonitorJSONCheckCommands() method is refactored
to use this new method

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 11:04:32 +01:00
Daniel P. Berrange
2ecec6e206 Add a qemuMonitorGetCPUDefinitions method for QMP query-cpu-definitions command
Add a new qemuMonitorGetCPUDefinitions() method to support invocation
of the 'query-cpu-definitions' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 10:53:24 +01:00
Daniel P. Berrange
3999372182 Add a qemuMonitorGetMachines() method for QMP query-machines command
Add a new qemuMonitorGetMachines() method to support invocation
of the 'query-machines' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 10:47:16 +01:00
Daniel P. Berrange
3dce0a829a Add a qemuMonitorGetVersion() method for QMP query-version command
Add a new qemuMonitorGetVersion() method to support invocation
of the 'query-version' JSON monitor command. No HMP equivalent
is provided, since this will only be used for QEMU >= 1.2

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 10:46:34 +01:00
Daniel P. Berrange
ed769e1854 Remove probing of CPU models when launching QEMU guests
When launching a QEMU guest the binary is probed to discover
the list of supported CPU names. Remove this probing with a
simple lookup of CPU models in the qemuCapsPtr object. This
avoids another invocation of the QEMU binary during the
startup path.

As a nice benefit we can now remove all the nasty hacks from
the test suite which were done to avoid having to exec QEMU
on the test system. The building of the -cpu command line
can just rely on data we pre-populate in qemuCapsPtr.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 10:24:52 +01:00
Daniel P. Berrange
bd66c243b3 Remove probing of machine types when canonicalizing XML
When XML for a new guest is received, the machine type is
immediately canonicalized into the version specific name.
This involves probing QEMU for supported machine types.
Replace this probing with a lookup of the machine types
in the (hopefully cached) qemuCapsPtr object

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 10:24:52 +01:00
Daniel P. Berrange
15ee6614f7 Remove probing of flags when launching QEMU guests
Remove all use of the existing APIs for querying QEMU
capability flags. Instead obtain a qemuCapsPtr object
from the global cache. This avoids the execution of
'qemu -help' (and related commands) when launching new
guests.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 10:24:52 +01:00
Daniel P. Berrange
9467ab6074 Move virProcess{Kill,Abort,TranslateStatus} into virprocess.{c,h}
Continue consolidation of process functions by moving some
helpers out of command.{c,h} into virprocess.{c,h}

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-26 10:09:57 +01:00
Daniel P. Berrange
0fb58ef5cd Rename virPid{Abort,Wait} to virProcess{Abort,Wait}
Change "Pid" to "Process" to align with the virProcessKill
API naming prefix

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-26 10:09:57 +01:00
Eric Blake
d165c54d86 tests: test previous commit
Add a test to avoid virCommand regressions.

* tests/commandtest.c (test8): Explicitly test env-var overrides.
2012-09-24 17:04:46 -06:00
Miloslav Trmač
fca338a06c Drop unused return value of virLogOutputFunc
Nothing uses the return value, and creating it requries otherwise
unnecessary strlen () calls.

This cleanup is conceptually independent from the rest of the series
(although the later patches won't apply without it).  This just seems
a good opportunity to clean this up, instead of entrenching the unnecessary
return value in the virLogOutputFunc instance that will be added in this
series.

Signed-off-by: Miloslav Trmač <mitr@redhat.com>
2012-09-21 12:55:13 -06:00
Eric Blake
4ecb723b9e maint: fix up copyright notice inconsistencies
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/
2012-09-20 16:30:55 -06:00
Martin Kletzander
3b72650181 tests: Add tests for dump-core option 2012-09-20 16:41:07 +02:00
Martin Kletzander
ff2d5a3d8a qemu: add support for dump-guest-core option
The "dump-guest-core' option is new option for the machine type
(-machine pc,dump-guest-core) that controls whether the guest memory
will be marked as dumpable.

While testing this, I've found out that the value for the '-M' options
is not parsed correctly when additional parameters are used. However,
when '-machine' is used for the same options, it gets parsed as
expected. That's why this patch also modifies the parsing and creating
of the command line, so both '-M' and '-machine' are recognized. In
QEMU's help there is only mention of the 'machine parameter now with
no sign of the older '-M'.
2012-09-20 16:41:07 +02:00
Martin Kletzander
ec62a602bb QEMU Tests for reboot-timeout 2012-09-20 16:41:02 +02:00
Martin Kletzander
8c95290868 qemu: Cleanup boot parameter building
This patch cleans up building the "-boot" parameter and while on that
fixes one inconsistency by modifying these things:

 - I completed the unfinished virDomainBootMenu enum by specifying
   LAST, declaring it and also declaring the TypeFromString and
   TypeToString parameters.
 - Previously mentioned TypeFromString and TypeToString are used when
   parsing the XML.
 - Last, but not least, visible change is that the "-boot" parameter
   is built and parsed properly:
    - The "order=" prefix is used only when additional parameters are
      used (menu, etc.).
    - It's rewritten in a way that other parameters can be added
      easily in the future (used in following patch).
    - The "order=" parameter is properly parsed regardless to where it
      is placed in the string (e.g. "menu=on,order=nc").
    - The "menu=" parameter (and others in the future) are created
      when they should be (i.e. even when bootindex is supported and
      used, but not when bootloader is selected).
2012-09-20 10:59:35 +02:00
Doug Goldstein
b95ad92e05 build: define WITH_INTERFACE for the driver
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.

Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.

* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
2012-09-19 08:27:01 -06:00
Eric Blake
fd66ea669c bitmap: fix problems in previous commit
Commit ee3d3893 missed the fact that (unsigned char)<<(int)
is truncated to int, and therefore failed for any bitmap data
longer than four bytes.

Also, I failed to run 'make syntax-check' on my commit 4bba6579;
for whatever odd reason, ffs lives in a different header than ffsl.

* src/util/bitmap.c (virBitmapNewData): Use correct shift type.
(includes): Glibc (and therefore gnulib) decided ffs is in
<strings.h>, but ffsl is in <string.h>.
* tests/virbitmaptest.c (test5): Test it.
2012-09-18 17:47:06 -06:00
Ján Tomko
587632ffeb qemuhelptest: convert runaway tab to spaces
Make syntax-check happy and smiling again.
2012-09-18 11:47:12 +02:00
Ján Tomko
76345dd43a tests: add qemu-1.2.0 help data
Generated with:

qemu-system-x86_64 -help >tests/qemuhelpdata/qemu-1.2.0
qemu-system-x86_64 \
    -device ? \
    -device pci-assign,? \
    -device virtio-blk-pci,? \
    -device virtio-net-pci,? \
    -device scsi-disk,? 2>tests/qemuhelpdata/qemu-1.2.0-device
2012-09-18 15:43:28 +08:00
Osier Yang
6e73850b01 qemu: Use disk wwn in qemu command line
All of ide-drive, ide-hd, ide-cd, scsi-disk, scsi-hd, and scsi-cd
supports wwn property. (NB, scsi-block doesn't support to set wwn).

* src/qemu/qemu_command.c: Error out if underlying QEMU doesn't
support wwn property for the device; Set wwn for the device otherwise.

* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.args: New test
* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.xml: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.args: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.xml: Likewise
* tests/qemuxml2argvtest.c: Add the new tests.
2012-09-18 15:00:01 +08:00
Hu Tao
ee7d23ba4b use virBitmap to store cpumask info. 2012-09-17 14:59:37 -04:00
Hu Tao
0fc89098a6 New functions for virBitmap
In many places we store bitmap info in a chunk of data
(pointed to by a char *), and have redundant codes to
set/unset bits. This patch extends virBitmap, and convert
those codes to use virBitmap in subsequent patches.
2012-09-17 14:59:36 -04:00
Daniel P. Berrange
a55a610b30 Fix 3 broken test cases which were mistakenly raising errors
Several test cases were mistakenly raising errors due to the
QEMU_CAPS_KVM flag being missed.
2012-09-14 17:15:31 +01:00
Martin Kletzander
fbf9aa12c7 qemu: Add support for EOI with APIC
This patch adds full support for EOI setting for domains. Because this
is CPU feature (flag), the model needs to be added even when it's not
specified. Fortunately this problem was already solved with kvmclock,
so this patch simply abuses that.

And due to the size of the patch (17 lines) I dared to include the tests.
2012-09-14 08:32:56 +02:00
Dmitry Guryanov
a62116de32 parallels: implement containers creation
Add separate function parallelsCreateCt, which creates container.
Also add example xml configuration domain-parallels-ct-simple.xml.

Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
2012-09-13 21:19:58 +08:00
Daniel P. Berrange
beac09fd68 Turn QEMU capabilities object into a full virObjectPtr
The current qemu capabilities are stored in a virBitmapPtr
object, whose type is exposed to callers. We want to store
more data besides just the flags, so we need to move to a
struct type. This object will also need to be reference
counted, since we'll be maintaining a cache of data per
binary. This change introduces a 'qemuCapsPtr' virObject
class. Most of the change is just renaming types and
variables in all the callers

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-13 12:24:12 +01:00
Daniel P. Berrange
985a321ac0 Wait to receive QMP greeting before sending any monitor commands
Technically speaking we should wait until we receive the QMP
greeting message before attempting to send any QMP monitor
commands. Mostly we've got away with this, but there is a race
in some QEMU which cause it to SEGV if you sent it data too
soon after startup. Waiting for the QMP greeting avoids the
race

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-13 11:44:05 +01:00
Guannan Ren
1c9d485dda test: add xml2argvtest for usb-redir filter and update xml schema 2012-09-13 17:22:37 +08:00
Eric Blake
a20f06d9d9 build: avoid confusing make with raw name 'undefine'
Make has a builtin operator 'undefine', and coupled with latest
automake.git, this test name ended up confusing make into thinking
the file name was meant to be used as the make operator.  Renaming
the file avoids the confusion.

* tests/undefine: Rename...
* tests/virsh-undefine: ...to this.
* tests/Makefile.am (test_scripts): Use new name.
Reported by Jim Meyering.
2012-09-12 11:27:22 -06:00
Daniel P. Berrange
48d112210d Introduce a test suite for the JSON monitor
Take advantage of the previously added monitor helpers to
create a test suite for the QEMU JSON monitor impl. As a
proof of concept, this tests the 'qemuMonitorGetStatus'
implementation

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-07 13:18:09 +01:00
Daniel P. Berrange
8d78fd04be Add helper library for testing the qemu monitor code
To be able to test the QEMU monitor code, we need to have a fake
QEMU monitor server. This introduces a simple (dumb) framework
that can do this. The test case registers a series of items to
be sent back as replies to commands that will be executed. A
thread runs the event loop looking for incoming replies and
sending back this pre-registered data. This allows testing all
QEMU monitor code that deals with parsing responses and errors
from QEMU, without needing QEMU around

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-07 13:18:04 +01:00
Gene Czarcinski
f20b7dbe63 remove dnsmasq command line parameter "--filterwin2k"
This patch removed the "--filterwin2k" dnsmasq command line
parameter which was unnecessary for domain specification,
possibly blocked some usage, and was command line clutter.

Gene Czarcinski <gene@czarc.net>
2012-09-06 10:59:33 -06:00
Eric Blake
5d3b65f96b build: avoid test failure when sasl was not compiled in
On systems without cyrus-sasl-devel available (I happened to be
in that situation on my FreeBSD testing), this test fails rather
miserably:

TEST: libvirtdconftest
      .....!!!!!!...!!!!!!!!!!!!!!!!!!!!!!!!!  39  FAIL
FAIL: libvirtdconftest

with verbose output showing things like:

39) Test corruption                                          ... libvir: Config File error : unsupporeted configuration: remoteReadConfigFile: /usr/home/dummy/libvirt/tests/../daemon/libvirtd.conf: auth_tcp: unsupported auth sasl

* tests/libvirtdconftest.c (testCorrupt): Avoid failure when sasl
is missing.
2012-09-05 15:02:01 -06:00
Viktor Mihajlovski
72f1f2206e Rename iolimit to blockio.
After discussion with DB we decided to rename the new iolimit
element as it creates the impression it would be there to
limit (i.e. throttle) I/O instead of specifying immutable
characteristics of a block device.
This is also backed by the fact that the term I/O Limits has
vanished from newer storage admin documentation.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-09-04 09:14:36 -06:00
Daniel P. Berrange
8675406cea Fix mingw64 build by using intptr_t for int->void* casts
The viratomictest.c was casting from an int to a void* via a
long. This works on Linux or Mingw32, but fails on Mingw64
due to a pointer/integer size mis-match. Replacing 'long'
with 'intptr_t' ensures matching type sizes
2012-09-04 11:16:55 +01:00
Martin Kletzander
65c4ae93b5 tests: Add tests for qemu S3/S4 state configuration
Few tests were added which are checking whether the parsing of the xml
and command-line arguments is working and compatible with each other.
2012-09-03 09:32:45 +02:00
Viktor Mihajlovski
277a49bce7 qemu: Support for Block Device IO Limits.
Implementation of iolimits for the qemu driver with
capability probing for block size attribute and
command line generation for block sizes.
Including testcase for qemuxml2argvtest.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-08-31 11:27:47 -07:00
Eric Blake
54e99644bf command: shell-quote when logging commands
Without this patch, logged command executions can be ambiguous if
the command contained any shell metacharacters.  This has caused
more than one person to attempt to patch clients to add unnecessary
quoting, without realizing that the command itself was run with
correct args, and only the logged output was ambiguous.

* src/util/command.c (virCommandToString): Add shell escapes.
* tests/commandtest.c (test16): Test new behavior.
* tests/commanddata/test16.log: Update expected output.
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Likewise.
* tests/networkxml2argvdata/*.argv: Likewise.
2012-08-31 08:10:58 -07:00
Gene Czarcinski
f3868259ca dnsmasq: avoid forwarding queries without a domain
dnsmasq is forwarding a number of queries upstream that should not
be done.  There still remains an MX query for a plain name with no
domain specified that will be forwarded is dnsmasq has --domain=xxx
--local=/xxx/ specified. This does not happen with no domain name
and --local=// ... not a libvirt problem.

BTW, thanks again to Claudio Bley!
2012-08-22 11:36:39 -06:00
Tang Chen
19630db3e3 Support emulatorpin xml parse.
This patch adds a new xml element <emulatorpin>, which is a sibling
to the existing <vcpupin> element under the <cputune>, to pin emulator
threads to specified physical CPUs.

Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
2012-08-22 15:51:23 +08:00
J.B. Joret
a46af26004 qemu: Disk Geometry Override Support
Qemu command line generation for geometry override and testcases.

Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-08-21 15:35:48 -06:00
Eric Blake
1a4379cb21 build: split driver_storage into convenience library
Commit 1d22ba95 was complete at the time, but we have since
reintroduced a warning that is fixed in the same manner:

  CCLD   storagebackendsheepdogtest

*** Warning: Linking the executable storagebackendsheepdogtest against the loadable module
*** libvirt_driver_storage.so is not portable!

* src/Makefile.am (libvirt_driver_storage.la): Factor into new
convenience library libvirt_driver_storage_impl.la.
* tests/Makefile.am (storagebackendsheepdogtest_LDADD): Link to
convenience library, not shared library.
2012-08-21 09:44:14 -06:00
Daniel P. Berrange
9136032a66 Add test case for SELinux label generation
This test case validates the correct generation of SELinux labels
for VMs, wrt the current process label. Since we can't actually
change the label of the test program process, we create a shared
library libsecurityselinuxhelper.so which overrides the getcon()
and setcon() libselinux.so functions. When started the test case
will check to see if LD_PRELOAD is set, and if not, it will
re-exec() itself setting LD_PRELOAD=libsecurityselinuxhelper.so

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-08-21 11:37:57 +01:00
Marcelo Cerri
e9377dda36 Multiple security drivers in XML data
This patch updates the domain and capability XML parser and formatter to
support more than one "seclabel" element for each domain and device. The
RNG schema and the tests related to this are also updated by this patch.

Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
2012-08-20 19:13:33 +02:00
Shradha Shah
1446003419 conf: parser/formatter/rng for <forward mode='hostdev'>
This patch introduces the new forward mode='hostdev' along with
attribute managed. Includes updates to the network RNG and new xml
parser/formatter code.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
2012-08-17 15:43:26 -04:00
Laine Stump
3f9274a524 conf: add <vlan> element to network and domain interface elements
The following config elements now support a <vlan> subelements:

within a domain: <interface>, and the <actual> subelement of <interface>
within a network: the toplevel, as well as any <portgroup>

Each vlan element must have one or more <tag id='n'/> subelements.  If
there is more than one tag, it is assumed that vlan trunking is being
requested. If trunking is required with only a single tag, the
attribute "trunk='yes'" should be added to the toplevel <vlan>
element.

Some examples:

  <interface type='hostdev'/>
    <vlan>
      <tag id='42'/>
    </vlan>
    <mac address='52:54:00:12:34:56'/>
    ...
  </interface>

  <network>
    <name>vlan-net</name>
    <vlan trunk='yes'>
      <tag id='30'/>
    </vlan>
    <virtualport type='openvswitch'/>
  </network>

  <interface type='network'/>
    <source network='vlan-net'/>
    ...
  </interface>

  <network>
    <name>trunk-vlan</name>
    <vlan>
      <tag id='42'/>
      <tag id='43'/>
    </vlan>
    ...
  </network>

  <network>
    <name>multi</name>
    ...
    <portgroup name='production'/>
      <vlan>
        <tag id='42'/>
      </vlan>
    </portgroup>
    <portgroup name='test'/>
      <vlan>
        <tag id='666'/>
      </vlan>
    </portgroup>
  </network>

  <interface type='network'/>
    <source network='multi' portgroup='test'/>
    ...
  </interface>

IMPORTANT NOTE: As of this patch there is no backend support for the
vlan element for *any* network device type. When support is added in
later patches, it will only be for those select network types that
support setting up a vlan on the host side, without the guest's
involvement. (For example, it will be possible to configure a vlan for
a guest connected to an openvswitch bridge, but it won't be possible
to do that for one that is connected to a standard Linux host bridge.)
2012-08-15 13:10:57 -04:00
Dmitry Guryanov
9700ca82fe parallels: add domain configuration example
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
2012-08-15 16:39:40 +08:00
Laine Stump
4af3cbafdd conf: support partially-specified <virtualport> in parser and formatter
Until now, all attributes in a <virtualport> parameter list that were
acceptable for a particular type, were also required. There were no
optional attributes.

One of the aims of supporting <virtualport> in libvirt's virtual
networks and portgroups is to allow specifying the group-wide
parameters in the network's virtualport, and merge that with the
interface's virtualport, which will have the instance-specific info
(i.e. the interfaceid or instanceid).

Additionally, the guest's interface XML shouldn't need to know what
type of network connection will be used prior to runtime - it could be
openvswitch, 802.1Qbh, 802.1Qbg, or none of the above - but should
still be able to specify instance-specific info just in case it turns
out to be applicable.

Finally, up to now, the parser for virtualport has always generated a
random instanceid/interfaceid when appropriate, making it impossible
to leave it blank (which is what's required for virtualports within a
network/portprofile definition).

This patch modifies the parser and formatter of the <virtualport>
element in the following ways:

* because most of the attributes in a virNetDevVPortProfile are fixed
  size binary data with no reserved values, there is no way to embed a
  "this value wasn't specified" sentinel into the existing data. To
  solve this problem, the new *_specified fields in the
  virNetDevVPortProfile object that were added in a previous patch of
  this series are now set when the corresponding attribute is present
  during the parse.

* allow parsing/formatting a <virtualport> that has no type set. In
  this case, all fields are settable, but all are also optional.

* add a GENERATE_MISSING_DEFAULTS flag to the parser - if this flag is
  set and an instanceid/interfaceid is expected but not provided, a
  random one will be generated. This was previously the default
  behavior, but is now done only for virtualports inside an
  <interface> definition, not for those in <network> or <portgroup>.

* add a REQUIRE_ALL_ATTRIBUTES flag to the parser - if this flag is
  set the parser will call the new
  virNetDevVPortProfileCheckComplete() functions at the end of the
  parser to check for any missing attributes (based on type), and
  return failure if anything is missing. This used to be default
  behavior. Now it is only used for the virtualport defined inside an
  interface's <actual> element (by the time you've figured out the
  contents of <actual>, you should have all the necessary data to fill
  in the entire virtualport)

* add a REQUIRE_TYPE flag to the parser - if this flag is set, the
  parser will return an error if the virtualport has no type
  attribute. This also was previously the default behavior, but isn't
  needed in the case of the virtualport for a type='network' interface
  (i.e. the exact type isn't yet known), or the virtualport of a
  portgroup (i.e. the portgroup just has modifiers for the network's
  virtualport, which *does* require a type) - in those cases, the
  check will be done at domain startup, once the final virtualport is
  assembled (this is handled in the next patch).
2012-08-14 15:47:50 -04:00
Eric Blake
a40f9e9a59 maint: drop a leftover comment line
* tests/viratomictest.c: Fix copy-and-paste bug.
2012-08-14 11:39:56 -06:00
Eric Blake
51ee43aa55 build: fix PROBE() usage of intptr_t
Otherwise, in locations like virobject.c where PROBE is used,
for certain configure options, the compiler warns:

util/virobject.c:110:1: error: 'intptr_t' undeclared (first use in this function)

As long as we are making this header always available, we can
clean up several other files.

* src/internal.h (includes): Pull in <stdint.h>.
* src/conf/nwfilter_conf.h: Rely on internal.h.
* src/storage/storage_backend.c: Likewise.
* src/storage/storage_backend.h: Likewise.
* src/util/cgroup.c: Likewise.
* src/util/sexpr.h: Likewise.
* src/util/virhashcode.h: Likewise.
* src/util/virnetdevvportprofile.h: Likewise.
* src/util/virnetlink.h: Likewise.
* src/util/virrandom.h: Likewise.
* src/vbox/vbox_driver.c: Likewise.
* src/xenapi/xenapi_driver.c: Likewise.
* src/xenapi/xenapi_utils.c: Likewise.
* src/xenapi/xenapi_utils.h: Likewise.
* src/xenxs/xenxs_private.h: Likewise.
* tests/storagebackendsheepdogtest.c: Likewise.
2012-08-09 15:40:42 -06:00
Guannan Ren
015c603bcd qemu: add two qemu caps for lsi and virtio-scsi SCSI controllers
Rename qemuDefaultScsiControllerModel to qemuCheckScsiControllerModel.
When scsi model is given explicitly in XML(model > 0) checking if the
underlying QEMU supports it or not first, raise an error on checking
failure.
When the model is not given(mode <= 0), return LSI by default, if
the QEMU doesn't support it, raise an error.
2012-08-08 15:06:33 +08:00
Guannan Ren
8694c716ae qemu: add capabilities flags related to scsi controller
QEMU_CAPS_SCSI_LSI
    set the flag when "lsi53c895a", bus PCI, alias "lsi" in
    the output of "qemu -device ?"
    -device lsi in qemu command line

  QEMU_CAPS_VIRTIO_SCSI_PCI
    set the flag when "name "virtio-scsi-pci", bus PCI" in
    the output of qemu devices query.
    -device virtio-scsi-pci in qemu command line
2012-08-08 14:25:24 +08:00
Daniel P. Berrange
7c1119e3bb Set LIBVIRT_AUTOSTART=0 when running test suites
Occasionally some test cases will (accidentally) try to spawn
libvirtd. Set the LIBVIRT_AUTOSTART=0 environment variable to
ensure the remote driver never tries autostart.
2012-08-07 14:58:17 +01:00
Daniel P. Berrange
f9456b0160 Don't check the 'connect' command in virsh-all test
The 'virsh-all' test case will invoke each virsh command with
no args. With the 'connect' command this causes virsh to try
to connect to the default URI, which in turn tries to spawn
libvirtd. This is not something we want todo in the test suite,
so skip the 'connect' command.
2012-08-07 11:59:08 +01:00
Daniel P. Berrange
410a5dac42 Turn virSocket into a virObject
Make virSocket use the virObject APIs for reference counting

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-08-07 11:47:41 +01:00
Daniel P. Berrange
e10e1969d5 Turn virNetTLSContext and virNetTLSSession into virObject instances
Make virNetTLSContext and virNetTLSSession use the virObject
APIs for reference counting

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-08-07 11:47:41 +01:00
Daniel P. Berrange
46ec5f85c8 Convert public datatypes to inherit from virObject
This converts the following public API datatypes to use the
virObject infrastructure:

  virConnectPtr
  virDomainPtr
  virDomainSnapshotPtr
  virInterfacePtr
  virNetworkPtr
  virNodeDevicePtr
  virNWFilterPtr
  virSecretPtr
  virStreamPtr
  virStorageVolPtr
  virStoragePoolPtr

The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.

* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
  public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
  src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
  src/qemu/qemu_process.c, src/storage/storage_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
  tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
  tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
  to use virObjectUnref/virObjectRef

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-08-07 11:47:41 +01:00
Richa Marwaha
756fe7868b Add -netdev bridge capabilities
This patch adds the capability in libvirt to check if
-netdev bridge option is supported or not.

Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant<coreyb@linux.vnet.ibm.com>
2012-08-06 16:56:59 +02:00
Eric Blake
87de27b7f9 virrandom: make virRandomInitialize an automatic one-shot
All callers used the same initialization seed (well, the new
viratomictest forgot to look at getpid()); so we might as well
make this value automatic.  And while it may feel like we are
giving up functionality, I documented how to get it back in the
unlikely case that you actually need to debug with a fixed
pseudo-random sequence.  I left that crippled by default, so
that a stray environment variable doesn't cause a lack of
randomness to become a security issue.

* src/util/virrandom.c (virRandomInitialize): Rename...
(virRandomOnceInit): ...and make static, with one-shot call.
Document how to do fixed-seed debugging.
* src/util/virrandom.h (virRandomInitialize): Drop prototype.
* src/libvirt_private.syms (virrandom.h): Don't export it.
* src/libvirt.c (virInitialize): Adjust caller.
* src/lxc/lxc_controller.c (main): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/util/iohelper.c (main): Likewise.
* tests/seclabeltest.c (main): Likewise.
* tests/testutils.c (virtTestMain): Likewise.
* tests/viratomictest.c (mymain): Likewise.
2012-08-06 08:15:13 -06:00
Laine Stump
86d56e3104 build: fix "make rpm"
make rpm was failing with the following error:

Entering directory `/home/laine/devel/libvirt/tests'
make[2]: *** No rule to make target `viratomicdata.h',
             needed by `distdir'.  Stop.

viratomicdata.h is listed in tests/Makefile.am as a dependency of
viratomictest, but doesn't exist, is never referenced, and removing
that dependency permits make rpm to complete successfully.
2012-08-03 10:38:24 -04:00
Hendrik Schwartke
7383c1d762 Added timestamps to storage volumes
The access, birth, modification and change times are added to
storage volumes and corresponding xml representations.  This
shows up in the XML in this format:

<timestamps>
  <atime>1341933637.027319099</atime>
  <mtime>1341933637.027319099</mtime>
</timestamps>

Signed-off-by: Eric Blake <eblake@redhat.com>
2012-08-02 17:14:17 -06:00
Ján Tomko
37a10129c2 Update xml schemas according to libvirt source
capability.rng: Guest features can be in any order.
nodedev.rng: Added <driver> element, <capability> phys_function and
virt_functions for PCI devices.
storagepool.rng: Owner or group ID can be -1.

schema tests: New capabilities and nodedev files; changed owner and
group to -1 in pool-dir.xml.
storage_conf: Print uid_t and gid_t as signed to storage pool XML.
2012-08-02 14:36:23 -06:00
Jiri Denemark
2f2ca02195 build: Link security manager into libvirt.so
Security manager is not a dynamically loadable driver, it's a common
infrastructure similar to util, conf, cpu, etc. used by individual
drivers. Such code is allowed to be linked into libvirt.so.

This reverts commit ec5b7bd2ec and most of
aae5cfb699.

This patch is supposed to fix virdrivermoduletest failures for qemu and
lxc drivers as well as libvirtd's ability to load qemu and lxc drivers.
2012-08-02 16:17:00 +02:00
Daniel P. Berrange
0c9fd4cfe9 Rewrite virAtomic APIs using GLib's atomic ops code
There are a few issues with the current virAtomic APIs

 - They require use of a virAtomicInt struct instead of a plain
   int type
 - Several of the methods do not implement memory barriers
 - The methods do not implement compiler re-ordering barriers
 - There is no Win32 native impl

The GLib library has a nice LGPLv2+ licensed impl of atomic
ops that works with GCC, Win32, or pthreads.h that addresses
all these problems. The main downside to their code is that
the pthreads impl uses a single global mutex, instead of
a per-variable mutex. Given that it does have a Win32 impl
though, we don't expect anyone to seriously use the pthread.h
impl, so this downside is not significant.

* .gitignore: Ignore test case
* configure.ac: Check for which atomic ops impl to use
* src/Makefile.am: Add viratomic.c
* src/nwfilter/nwfilter_dhcpsnoop.c: Switch to new atomic
  ops APIs and plain int datatype
* src/util/viratomic.h: inline impls of all atomic ops
  for GCC, Win32 and pthreads
* src/util/viratomic.c: Global pthreads mutex for atomic
  ops
* tests/viratomictest.c: Test validate to validate safety
  of atomic ops.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-08-02 11:50:59 +01:00
Peter Krempa
fbe871263c qemu: Add support for "none" USB controller
This patch enables the "none" USB controller for qemu guests and adds
valdiation on hot-plugged devices if the guest has USB disabled.

This patch also adds a set of tests to check parsing of domain XMLs that
use the "none" controller and some forbidden situations concerning it.
2012-08-02 12:13:48 +02:00
Daniel P. Berrange
aae5cfb699 Don't link nwfilter or secrets driver to libvirt.so
The nwfilter and secrets drivers are both stateful and are already
linked directly to libvirtd. Linking them to libvirt.so is thus
wrong, likewise exporting their symbols in libvirt.so is wrong
2012-07-31 17:49:41 +01:00
Daniel P. Berrange
92c5924a05 Remove tabs from all perl files & enforce this
The cfg.mk file rule to check for tab characters was not
applied to perl files. Much of our Perl code is full of
tabs as a result. Kill them, kill them all !
2012-07-30 13:09:57 +01:00
Eric Blake
3ad13c92a7 maint: avoid regression on copyright listings
Commit f9ce7dad6 tried to kill uses of a raw street address, but
missed a few instances.  Automate things so we don't introduce
new problems in the future.

* cfg.mk (sc_copyright_address): New rule.
(exclude_file_name_regexp--sc_copyright_address): Add exemption.
* bootstrap.conf: Adjust offenders.
* build-aux/augeas-gentest.pl: Likewise.
* examples/systemtap/events.stp: Likewise.
* examples/systemtap/qemu-monitor.stp: Likewise.
* examples/systemtap/rpc-monitor.stp: Likewise.
* src/dtrace2systemtap.pl: Likewise.
* src/esx/esx_vi_generator.py: Likewise.
* src/hyperv/hyperv_wmi_generator.py: Likewise.
* src/remote/qemu_protocol.x: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/rpc/gensystemtap.pl: Likewise.
* src/rpc/virnetprotocol.x: Likewise.
* tests/object-locking.ml: Likewise.
* tools/virt-xml-validate.in: Likewise.
2012-07-27 07:42:34 -06:00
Osier Yang
a4bcefbcff maint: Use consistent copyright.
This is a follow up patch of commit f9ce7dad6, it modifies all
the files which declare the copyright like "See COPYING.LIB for
the License of this software" to use the detailed/consistent one.

And deserts the outdated comments like:

 * libvirt-qemu.h:
 * Summary: qemu specific interfaces
 * Description: Provides the interfaces of the libvirt library to handle
 *              qemu specific methods
 *
 * Copy:  Copyright (C) 2010, 2012 Red Hat, Inc.

Uses the more compact style like:

 * libvirt-qemu.h: Interfaces specific for QEMU/KVM driver
 *
 * Copyright (C) 2010, 2012 Red Hat, Inc.
2012-07-27 18:27:21 +08:00
Osier Yang
98518178a2 daemon: Fix the wrong macro name
WITH_INTERFACE is not defined, it should be WITH_NETCF there to load
the interface driver.

Eric posted patch weeks ago to resolve the problems in the whole
build system, but it's not finalised yet:

https://www.redhat.com/archives/libvir-list/2012-June/msg01299.html

I'm going to simply fix the wrong macro name here so that the
interface driver could loaded, and continue the work on the listing
API for interface driver.
2012-07-24 15:45:20 -06:00
Peter Krempa
fa54d2a823 tests: Add support for catching domain XML parsing errors
This patch enhances qemuxml2argvtest to deal with semantically incorrect
domain XMLs, that generate errors while parsing.

This patch cleans up macros that invoke the tests and changes boolean
flags to a bit array flag variable.
2012-07-23 13:46:53 +02:00
Doug Goldstein
faffe26909 Fix test failure when no IPv6 is avail
When the system doesn't have IPv6 available (e.g. not built into the
kernel or the module isn't loaded), you can not create an IPv6 socket.
The test determines earlier on that IPv6 isn't available then goes and
creates a socket. This makes socket creation conditional on IPv6
availability.
2012-07-23 10:37:01 +02:00
Osier Yang
f9ce7dad60 Desert the FSF address in copyright
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c
2012-07-23 10:50:50 +08:00
Jean-Baptiste Rouault
d4611c0ee3 vmx: handle shared folders parsing
This patch adds support for parsing vmx files with
shared folders enabled.

Update test suite accordingly.
2012-07-21 20:15:02 +02:00
Jean-Baptiste Rouault
1f2bd1072a vmx: handle shared folders formatting
This patch adds support for generating vmx files with
shared folders enabled.

Update test suite accordingly.
2012-07-21 19:45:02 +02:00
Eric Blake
df80282dab tests: reduce length of nodeinfodata test names
Commit ddd6bef4 switched to the ustar format to fix an issue where
'make dist' fails to create a tarball because we have files with
relative names longer than 100 bytes by the time you include a
'libvirt-0.9.13' prefix.  Unfortunately, even with ustar format,
the use of 'tar -ch' tries to convert symlinks to hard links,
also with a name too long (omitting the -h works, but automake
automatically passes -h); such symlinks were added in commit
6dcf98c, which resulted in 'make dist' breaking again.  The
solution is to rename the offending symlinks to something shorter,
by shortening the entire nodeinfodata naming scheme.

* tests/nodeinfotest.c (mymain): Shorten test names.
(linuxTestNodeInfo): Accommodate new names.
* tests/nodeinfodata/*: Rename files accordingly.
2012-07-20 15:36:11 -06:00
Eric Blake
a22a36e8fe tests: avoid seclabeltest crash
Commit a56c347 introduced a use of random numbers into seclabel
handling, but failed to initialize the random number generator
in the testsuite.  Also, fail with usual status, not 255.

* tests/seclabeltest.c (main): Initialize randomness.
2012-07-20 15:04:23 -06:00
Eric Blake
03e0ec10b4 nodeinfo: deal with offline cpus in a node
Commit 80533ca forgot to think about offline cpus.  When a node
cpu is offline, then its topology/ subdirectory is not present,
leading to spurious error messages leaked to the user such as:

libvir:  error : cannot open /home/dummy/libvirt/tests/nodeinfodata/linux-nodeinfo-sysfs-test-6/node/node0/cpu7/topology/physical_package_id: No such file or directory

Fix that, as well as test it; the test data is gathered from a
machine with one NUMA node, hyperthreading, and with 2 of the
8 cpus offline.

* src/nodeinfo.c (virNodeParseNode): Don't parse topology of
offline cpus.
* tests/nodeinfotest.c (mymain): Run new test.
* tests/nodeinfodata/linux-nodeinfo-sysfs-test-6*: New data.
2012-07-18 17:11:42 -06:00
Sebastian Wiedenroth
29bc4fe646 Add a sheepdog backend for the storage driver
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.

A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.

A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.

In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.

  <disk type='network'>
    ...
    <source protocol="sheepdog" name="vdi_name">
      <host name="localhost" port="7000"/>
    </source>
  </disk>

To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.

Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
2012-07-18 20:08:27 +01:00
Peter Krempa
7ea1dd93aa test: Add test case for nodeinfotest if host machine doesn't have NUMA
Test filling of nodeinfo structure if /sys/devices/system/node does not
exist. (Based on dump from a real machine)
2012-07-11 15:40:37 +02:00
Peter Krempa
1aa1a45b0a test: Add new test case for nodeinfotest
This patch adds test data that describe a machine that has two physical
processors that don't share same core id's on their cores. On this data
the "virsh nodeinfo" reported that the machine had 10 cores per socket
while the processor had only 8. (Before fixing nodeinfo gathering code).
2012-07-11 15:36:26 +02:00
Peter Krempa
80533ca25d nodeinfo: Fix gathering of nodeinfo data structure
This patch changes the way data to fill the nodeinfo structure are
gathered. We've gathere the test data by iterating processors an sockets
separately from nodes. The reported data was based solely on information
about core id. Problems arise when eg cores in mulit-processor machines
don't have same id's on both processors or maybe one physical processor
contains more NUMA nodes.

This patch changes the approach how we detect processors and nodes. Now
we start at enumerating nodes and for each node processors, sockets and
threads are enumerated separately. This approach provides acurate data
that comply to docs about the nodeinfo structure. This also enables to
get rid of hacks: see commits 10d9038b74,
ac9dd4a676. (Those changes in nodeinfo.c
are efectively reverted by this patch).

This patch also changes output of one of the tests, as the processor
topology is now acquired more precisely.
2012-07-11 15:32:19 +02:00
Peter Krempa
6dcf98c822 nodeinfo_test: Enhance test data before changing nodeinfo gathering
This patch adds test data needed by the new way node information will be
gathered. This patch adds symlinks to cpu cores to their corresponding
node directory.
2012-07-11 15:16:36 +02:00
Viktor Mihajlovski
028ba4f375 S390: Adding testcases for s390
Add minimal s390-virtio domain testcase and testcases for virtio serial,
net, disk for the virtio-s390 bus.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-07-11 11:19:05 +02:00
Viktor Mihajlovski
6e15887f30 qemu: Change tests to use (modified) qemuDomainAssignAddresses
Rewrote the device assignment parts in tests to use qemuDomainAssignAddresses.
This way the tests will work for new device address types as they show
up in the future (like s390 device types).

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-07-11 11:19:05 +02:00
Christophe Fergeau
626dd5180e Fix /domain/features setting in qemuParseCommandLine
Commit 5e6ce1 moved down detection of the ACPI feature in
qemuParseCommandLine. However, when ACPI is detected, it clears
all feature flags in def->features to only set ACPI. This used to
be fine because this was the first place were def->features was set,
but after the move this is no longer necessarily true because this
block comes before the ACPI check:

if (strstr(def->emulator, "kvm")) {
    def->virtType = VIR_DOMAIN_VIRT_KVM;
    def->features |= (1 << VIR_DOMAIN_FEATURE_PAE);
}

Since def is allocated in qemuParseCommandLine using VIR_ALLOC, we
can always use |= when modifying def->features
2012-07-11 09:10:21 +02:00
Daniel Veillard
c47a8aec53 Fix one test regression on auth Ceph support
The extra data need to be added to one test case
2012-07-05 17:56:23 +08:00
Hendrik Schwartke
a3389319ba Added the attribute vendor_id to the cpu model
Introducing the attribute vendor_id to force the CPUID instruction
in a kvm guest to return the specified vendor.
2012-07-03 12:06:38 +02:00
Peter Krempa
11bdab02c2 maint: include ignore-value in internal.h
The ignore_value macro is used across libvirt. This patch includes it in
the internal header and cleans all other includes.
2012-06-28 16:36:30 +02:00
Gerd Hoffmann
fd4fd420b4 qemu: Add xhci support
qemu 1.1 features a xhci controller,
this patch adds support for it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-21 16:33:00 +02:00
Eric Blake
9202f2c220 buf: support peeking at string contents
Right now, the only way to get at the contents of a virBuffer is
to destroy it.  But there are cases in my upcoming patches where
peeking at the contents makes life easier.  I suppose this does
open up the potential for bad code to dereference a stale pointer,
by disregarding the docs that the return value is invalid on the
next virBuf operation, but such is life.

* src/util/buf.h (virBufferCurrentContent): New declaration.
* src/util/buf.c (virBufferCurrentContent): Implement it.
* src/libvirt_private.syms (buf.h): Export it.
* tests/virbuftest.c (testBufAutoIndent): Test it.
2012-06-11 09:21:27 -06:00
Guido Günther
2d98c68662 msg_buf_size is unsigned long not size_t
This fixes the build on 32bit systems which otherwise fails with:

virnetmessagetest.c: In function 'testMessageHeaderEncode':
virnetmessagetest.c:75:9: error: format '%zu' expects argument of type 'size_t', but argument 7 has type 'long unsigned int' [-Werror=format]
2012-06-10 20:43:30 +02:00
Michal Privoznik
a2c304f687 rpc: Switch to dynamically allocated message buffer
Currently, we are allocating buffer for RPC messages statically.
This is not such pain when RPC limits are small. However, if we want
ever to increase those limits, we need to allocate buffer dynamically,
based on RPC message len (= the first 4 bytes). Therefore we will
decrease our mem usage in most cases and still be flexible enough in
corner cases.
2012-06-05 17:48:40 +02:00
Jiri Denemark
ae953f5134 tests: Refresh qemu-1.1.0 data
QEMU 1.1.0 has been officially released. With 1.1.0 QEMU went back to
three-digits version even for the initial release and I renamed the data
files to match this fact. They were generated with

qemu-system-x86_64 -help >tests/qemuhelpdata/qemu-1.1.0
qemu-system-x86_64 \
    -device ? \
    -device pci-assign,? \
    -device virtio-blk-pci,? \
    -device virtio-net-pci,? \
    -device scsi-disk,? 2>tests/qemuhelpdata/qemu-1.1.0-device
2012-06-05 15:44:40 +02:00
Beat Jörg
7508338ff3 Fix for parallel port passthrough for QEMU
I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.

It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0

The first parameter is "tty". It sould be "parport".

If I launch qemu with -chardev parport,... it works as expected.

I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:

https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.html

Signed-off-by: Eric Blake <eblake@redhat.com>
2012-06-04 16:46:23 -06:00
Eric Blake
858c2476d9 command: avoid deadlock on EPIPE situation
It is possible to deadlock libvirt by having a domain with XML
longer than PIPE_BUF, and by writing a hook script that closes
stdin early.  This is because libvirt was keeping a copy of the
child's stdin read fd open, which means the write fd in the
parent will never see EPIPE (remember, libvirt should always be
run with SIGPIPE ignored, so we should never get a SIGPIPE signal).
Since there is no error, libvirt blocks waiting for a write to
complete, even though the only reader is also libvirt.  The
solution is to ensure that only the child can act as a reader
before the parent does any writes; and then dealing with the
fallout of dealing with EPIPE.

Thankfully, this is not a security hole - since the only way to
trigger the deadlock is to install a custom hook script, anyone
that already has privileges to install a hook script already has
privileges to do any number of other equally disruptive things
to libvirt; it would only be a security hole if an unprivileged
user could install a hook script to DoS a privileged user.

* src/util/command.c (virCommandRun): Close parent's copy of child
read fd earlier.
(virCommandProcessIO): Don't let EPIPE be fatal; the child may
be done parsing input.
* tests/commandhelper.c (main): Set up a SIGPIPE situation.
* tests/commandtest.c (test20): Trigger it.
* tests/commanddata/test20.log: New file.
2012-06-04 13:06:07 -06:00
Marti Raudsepp
195fa214b6 qemu: move -name arg to be 1st in "ps x" output
Currently, monitoring QEMU virtual machines with standard Unix
sysadmin tools is harder than it has to be. The QEMU command line is
often miles long and mostly redundant, it's hard to tell which process
is which.

This patch reorders the QEMU -name argument to be the first, so it's
immediately visible in "ps x", htop and "atop -c" output.
2012-06-01 15:06:56 -06:00
Eric Blake
1d22ba953b build: silence libtool during tests
Libtool is picky about linking against a module library (aka a .so);
giving lots of warnings like this in the tests directory:

  CCLD   networkxml2argvtest

*** Warning: Linking the executable networkxml2argvtest against the loadable module
*** libvirt_driver_network.so is not portable!

Fix that by splitting things into a convenience library which can
be used directly by the tests, and making the real .so just wrap
the convenience library.

Based on a suggestion by Daniel P. Berrange.

* configure.ac (--with-driver-modules): Fix help test.
* src/Makefile.am (libvirt_driver_xen.la, libvirt_driver_libxl.la)
(libvirt_driver_qemu.la, libvirt_driver_lxc.la)
(libvirt_driver_uml.la): Factor into new convenience libraries.
* tests/Makefile.am (xen_LDADDS, qemu_LDADDS, lxc_LDADDS)
(networkxml2argvtest_LDADD): Link to convenience libraries, not
shared libraries.
2012-05-28 07:19:25 -06:00
Eric Blake
0159295d29 build: silence libtool warning on probes.o
Libtool supports linking directly against .o files on some platforms
(such as Linux), which happens to be the only place where we are
actually doing that (for the dtrace-generated probes.o files).  However,
it raises a big stink about the non-portability, even though we don't
attempt it on platforms where it would actually fail:

  CCLD   libvirt_driver_qemu.la

*** Warning: Linking the shared library libvirt_driver_qemu.la against
the non-libtool
*** objects  libvirt_qemu_probes.o is not portable!

This shuts libtool up by creating a proper .lo file that matches
what libtool normally expects.

* src/Makefile.am (%_probes.lo): New rule.
(libvirt_probes.stp, libvirt_qemu_probes.stp): Simplify into...
(%_probes.stp): ...shorter rule.
(CLEANFILES): Clean new .lo files.
(libvirt_la_BUILT_LIBADD, libvirt_driver_qemu_la_LIBADD)
(libvirt_lxc_LDADD, virt_aa_helper_LDADD): Link against .lo file.
* tests/Makefile.am (PROBES_O, qemu_LDADDS): Likewise.
2012-05-25 12:00:05 -06:00
Eric Blake
428fc2bf31 tests: run valgrind on real executables, not libtool wrappers
* tests/Makefile.am (valgrind): Use libtool's ability to bypass
libtool wrappers when running valgrind.
2012-05-24 21:20:15 -06:00
Eric Blake
ee40725510 tests: back to short test names
With the switch to modules by default, I was getting super long
test output:

TEST: /home/remote/eblake/libvirt/tests/.libs/lt-interfacexml2xmltest

compared to the former:

TEST: interfacexml2xmltest

* tests/testutils.c (virtTestMain): Trim off libtool goop.
2012-05-24 21:09:03 -06:00
Daniel P. Berrange
6976f9e851 Add test case for loading driver modules
To ensure all symbols used by loadable driver modules are
exported in libvirt.so, add a test suite that simply loads
each driver in turn

* tests/Makefile.am, tests/virdrivermoduletest.c: Add
  a test case for loading drivers

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-24 13:18:01 +01:00
Daniel P. Berrange
a4e45a06c0 Split QEMU dtrace probes into separate file
When building as driver modules, it is not possible for the QEMU
driver module to reference the DTrace/SystemTAP probes linked into
the main libvirt.so. Thus we need to move the QEMU probes into a
separate file 'libvirt_qemu_probes.d'. Also rename the existing
file from 'probes.d' to 'libvirt_probes.d' while we're at it

* daemon/Makefile.am, src/internal.h: Include libvirt_probes.h
  instead of probes.h
* src/Makefile.am: Add rules for libvirt_qemu_probes.d
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
  src/qemu/qemu_monitor_text.c: Include libvirt_qemu_probes.h
* src/libvirt_probes.d: Rename from probes.d
* src/libvirt_qemu_probes.d: QEMU specific probes formerly
  in probes.d

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-24 13:18:01 +01:00
Daniel P. Berrange
6cd4b1fe16 Remove libvirt_test.la library
The libvirt_test.la library was introduced to allow test suites
to reference internal-only symbols. These days, nearly every
symbol we care about is in src/libvirt_private.syms, so there
is no need for libvirt_test.la to continue to exist

* src/Makefile.am: Delete libvirt_test.la & add new .syms files
* src/libvirt_private.syms: Export symbols needed by test suite
* tests/Makefile.am: Link to libvirt_test.la. Ensure LXC tests link
  to network_driver.la
* src/libvirt_esx.syms, src/libvirt_openvz.syms: Add exports needed
  by test suite
2012-05-24 13:18:00 +01:00
Guido Günther
680ac813a5 openvz: support file system quota reporting 2012-05-24 11:35:02 +02:00
Eric Blake
cdb87b1c4b virBuffer: add way to trim back extra text
I'm tired of writing:

bool sep = false;
while (...) {
    if (sep)
       virBufferAddChar(buf, ',');
    sep = true;
    virBufferAdd(buf, str);
}

This makes it easier, allowing one to write:

while (...)
    virBufferAsprintf(buf, "%s,", str);
virBufferTrim(buf, ",", -1);

to trim any remaining comma.

* src/util/buf.h (virBufferTrim): Declare.
* src/util/buf.c (virBufferTrim): New function.
* tests/virbuftest.c (testBufTrim): Test it.
2012-05-21 16:01:43 -06:00
Wido den Hollander
74951eadef storage backend: Add RBD (RADOS Block Device) support
This patch adds support for a new storage backend with RBD support.

RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.

It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.

To function this backend relies on librbd and librados being present on the
local system.

The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.

For storing credentials it uses the built-in secret mechanism of libvirt.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2012-05-21 12:37:38 -06:00
Stefan Berger
a3f3ab4c9c nwfilter: Add support for ipset
This patch adds support for the recent ipset iptables extension
to libvirt's nwfilter subsystem. Ipset allows to maintain 'sets'
of IP addresses, ports and other packet parameters and allows for
faster lookup (in the order of O(1) vs. O(n)) and rule evaluation
to achieve higher throughput than what can be achieved with
individual iptables rules.

On the command line iptables supports ipset using

iptables ... -m set --match-set <ipset name> <flags> -j ...

where 'ipset name' is the name of a previously created ipset and
flags is a comma-separated list of up to 6 flags. Flags use 'src' and 'dst'
for selecting IP addresses, ports etc. from the source or
destination part of a packet. So a concrete example may look like this:

iptables -A INPUT -m set --match-set test src,src -j ACCEPT

Since ipset management is quite complex, the idea was to leave ipset 
management outside of libvirt but still allow users to reference an ipset.
The user would have to make sure the ipset is available once the VM is
started so that the iptables rule(s) referencing the ipset can be created.

Using XML to describe an ipset in an nwfilter rule would then look as
follows:

  <rule action='accept' direction='in'>
    <all ipset='test' ipsetflags='src,src'/>
  </rule>

The two parameters on the command line are also the two distinct XML attributes
'ipset' and 'ipsetflags'.

FYI: Here is the man page for ipset:

https://ipset.netfilter.org/ipset.man.html

Regards,
    Stefan
2012-05-21 06:26:34 -04:00