Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Driver modules proved to be reliable for a long time. Since support for
not building modules complicates the code and makefiles drop it.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Introduce STRICT_FRAME_LIMIT_CFLAGS that will be used for
production code and RELAXED_FRAME_LIMIT_CFLAGS for tests.
Raising the limit for tests allows building them with clang
with optimizations disabled.
When trying to install libvirtd from sources I've noticed the
following failure:
/usr/bin/install: cannot stat 'virt-guest-shutdown.target': No such file or directory
Makefile:2792: recipe for target 'install-init-systemd' failed
make[3]: *** [install-init-systemd] Error 1
make[3]: *** Waiting for unfinished jobs....
The problem is that while other files around that location in
Makefile are firstly generated into the builddir and only after
that installed, virt-guest-shutdown.target file is not generated
at all and should be installed from the srcdir.
This was introduced in 01079727.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It is already discussed in "[RFC] daemon: remove hardcode dep on libvirt-guests" [1].
Mgmt can use means to save/restore domains on system shutdown/boot other than
libvirt-guests.service. Thus we need to specify appropriate ordering dependency between
libvirtd, domains and save/restore service. This patch takes approach suggested
in RFC and introduces a systemd target, so that ordering can be built next way:
libvirtd -> domain -> virt-guest-shutdown.target -> save-restore.service.
This way domains are decoupled from specific shutdown service via intermediate
target.
[1] https://www.redhat.com/archives/libvir-list/2016-September/msg01353.html
We can't use eg. @sysconfdir@ directly in the .pod file, because
pod2man(1) will interpret that as a variable name and format it
accordingly.
Instead, we use eg. SYSCONFDIR and use a subsequent sed(1) call
to turn it into the expected @sysconfdir@.
After this commit, all man pages are generated using the same two
steps:
1. Process a source $command.pod file with pod2man(1) to obtain
a valid man page in $command.$section.in
2. Process $command.$section.in with sed(1) to obtain the final
man page in $command.$section
This reverts commit 1e9808d3a1.
We shouldn't advertise libvirtd.socket activation, since currently
it means VM/network/... autostart won't work as expected.
We tried to find a middle ground by installing the config file without
an [Install] section, since systemd won't allow .socket to be enabled
without one... or at least it did do that; presently on f24 it allows
activating the socket quite happily. This also caused user confusion[1]
Just remove the socket file. I've filed a new RFE to track coming up
with a solution to the autostart problem[2], we can point users at that
if there's more confusion:
[1]: https://bugzilla.redhat.com/show_bug.cgi?id=1279348
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=1326136
Make it possible to build vz driver as a module and don't link it with
libvirt.so statically.
Remove registering it on client's side as far as we start relying on daemon
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This API is merely a convenience API, i.e. when managing clients connected to
daemon's servers, we should know (convenience) which server the specific client
is connected to. This implies a client-side representation of a server along
with a basic API to let the administrating client know what servers are actually
available on the daemon.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This change is merely because admin_server would contain all the code
from dispatchers and helpers to the actual APIs. Admin should have
similar structure to the daemon-side remote driver - dispatchers and
helpers in a separate module, APIs in a separate module.
Best viewed with -M.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
First hunk changes the use of srcdir to top_srcdir so it complies with
other rules in the Makefile. Second one removes the need of
remote_protocol.h in admin_protocol.h as it was suggested and worked in,
but this one line was missed apparently. Last one just removes the
'remote' naming from admin protocol specification, just so it's cleaner.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So, it's a little paradox that we use the file twice. Firstly to build
libvirt-admin.la (a client side of the Admin API), then once again to
build the server side. Well, the problem is, this does not play nicely
with the distclean since the file is generated. So while it's removed
in the src/ the distclean running in daemon/ will not find the file
and fail. The file is needed because it contains the RPC wrappers. So
let's leave the client code as is and from the daemon/ just link the
client library. The linker will find desired symbols and use them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The Admin API consists of a few files on daemon side. Notably
daemon/admin_server.{ch}. While they are both on the repo, only
the .c file is mentioned in Makefile. Therefore, .h is not
distributed and 'make rpm' fails.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In latest patches we added Admin API. However, the Makefile in daemon
was missing one dependency: admin_server.c is including generated file
admin_dispatch.h. However, this dependency was not explicitly marked
in the Makefile therefore the build happened to fail on some
occasions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For this to pe properly separated from other protocols used by the
server, there is second server added which allows access to the whole
virNetDaemon to its clients.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Many users, who admin their own machines, want to be able to access
system libvirtd via tools like virt-manager without having to enter
a root password. Just google 'virt-manager without password' and
you'll find many hits. I've read at least 5 blog posts over the years
describing slightly different ways of achieving this goal.
Let's finally add official support for this.
Install a polkit-1 rules file granting password-less auth for any user
in the new 'libvirt' group. Create the group on RPM install
https://bugzilla.redhat.com/show_bug.cgi?id=957300
In a lot places we use path like this:
$(srcdir)/../src/....
when in fact it can be:
$(top_srcdir)/src/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Apparently, files in /usr/lib/sysctl.d are usually prefixed with numbers
for easier ordering. Let's be consistent with this. I chose 60 for
libvirtd so that it goes after 50-default.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=1084876
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Convert the remote daemon auth check and the access control
code to use the common polkit API for checking auth.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I noticed this problem when adding systemd support to netcf, because I
setup the configure.ac to automatically prefer using systemd over
initscripts when possible - although I had copied the
install-data-local target from the example of libvirt's
"libvirt-guests" service more or less verbatim, "make distcheck" would
fail because it was trying to install the service file directly into
/lib/systemd/system rather than into
/home/user/some/unimportant/name/lib/systemd/system.
This is caused by the install/uninstall rules for the systemd unit
files relying on $(DESTDIR) pointing the installed files to the right
place, but in reality $(DESTDIR) is empty during this part of make
distcheck - it instead sets $(prefix) with the toplevel directory used
for its test build/install/uninstall cycle.
(This problem hasn't been seen when running "make distcheck" in
libvirt because libvirt will never build/install systemd support
unless explicitly told to do so on the configure commandline, and
"make distcheck" doesn't put the "--with-initscript=..." option on the
configure commandline.)
I verified that the same problem does exist in libvirt by modifying
libvirt's configure.ac to set:
init_systemd=yes
with_init_script=systemd+redhat
This forces a build/install of the systemd unit files during
distcheck, which yields an error like this:
/usr/bin/install -c -m 644 virtlockd.service \
/lib/systemd/system/
libtool: install: warning: relinking `libvirt-qemu.la'
/usr/bin/install: cannot remove '/lib/systemd/system/virtlockd.service': Permission denied
make[4]: *** [install-systemd] Error 1
After adding $(prefix) to all the definitions of SYSTEMD_UNIT_DIR,
make distcheck now completes successfully with the modified
configure.ac, and the above lines change to something like this:
/usr/bin/install -c -m 644 virtlockd.service \
/home/laine/devel/libvirt/libvirt-1.2.1/_inst/lib/systemd/system/
The libvirt.so library has far too many library deps to allow
linking against it from setuid programs. Those libraries can
do stuff in __attribute__((constructor) functions which is
not setuid safe.
The virt-login-shell needs to link directly against individual
files that it uses, with all library deps turned off except
for libxml2 and libselinux.
Create a libvirt-setuid-rpc-client.la library which is linked
to by virt-login-shell. A config-post.h file allows this library
to disable all external deps except libselinux and libxml2.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Caused by commit 012c25e8 splitting out a convenience library.
CC libvirtd_conf_la-libvirtd-config.lo
In file included from ../src/rpc/virnetmessage.h:24:0,
from ../src/rpc/virnetserverprogram.h:27,
from ../src/rpc/virnetserver.h:32,
from libvirtd-config.c:31:
../src/rpc/virnetprotocol.h:9:21: fatal error: rpc/rpc.h: No such file
or directory
* daemon/Makefile.am (libvirtd_conf_la_CFLAGS): Add XDR_CFLAGS.
Signed-off-by: Eric Blake <eblake@redhat.com>
If we use subdir-objects with automake, any reference to a
cross-directory .c file will result in automake creating
rules that track dependency in the cross directory. But this
presents a problem during 'make distclean' - if the cross
directory is cleaned up first, then the daemon directory will
be left with dangling references to .Po dependency files that
no longer exist.
Meanwhile, referring to the cross-directory .c file means
that we are compiling the file twice - once in src, and once
in daemon. Better is to compile just once in src into a
convenience library, and then use that library from daemon.
The tests directory had a similar situation of a cross-directory
.c file; to solve that, we actually need a convenience library.
* daemon/Makefile.am (DAEMON_SOURCES): Drop .c files...
(libvirtd_LDADD): ...and instead use library.
(libvirtd_conf_la_SOURCES): Declare a new convenience library.
(libvirtd_LDFLAGS): Drop duplicate flag.
* tests/Makefile.am (libvirtdconftest_SOURCES): Drop .c file...
(libvirtdconftest_LDADD): ..and instead use library.
Signed-off-by: Eric Blake <eblake@redhat.com>
Trying to enable automake's subdir-objects option resulted in
the creation of literal directories such as src/$(srcdir)/remote/.
I traced this to the fact that we had used a literal $(srcdir)
in a location that later fed an automake *_SOURCES variable.
This has also been reported as an automake bug:
http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13928
but it's better to fix our code than to wait for an automake fix.
Some things to remember that affect VPATH builds, and where an
in-tree build is blissfully unaware of the issues: if a VPATH
build fails to find a file that was used as a prereq of any
other target, then the rule for that file will expand $@ to
prefer the current build dir (bad because a VPATH build on a
fresh checkout will then stick $@ in the current directory
instead of the desired srcdir); conversely, if a VPATH build
finds the file in srcdir but decides it needs to be rebuilt,
then the rule for that file will expand $@ to include the
directory where it was found out-of-date (bad for an explicit
listing of $(srcdir)/$@ because an incremental VPATH build will
then expand srcdir twice). As we want these files to go into
srcdir unconditionally, we have to massage or avoid $@ for any
recipe that involves one of these files.
Therefore, this patch removes all uses of $(srcdir) from any
generated file name that later feeds a *_SOURCES variable, and
then rewrites all the recipes to generate those files to
hard-code their creation into srcdir without the use of $@.
* src/Makefile.am (REMOTE_DRIVER_GENERATED): Drop $(srcdir); VPATH
builds know how to find the files, and automake subdir-objects
fails with it in place.
(LXC_MONITOR_PROTOCOL_GENERATED, (LXC_MONITOR_GENERATED)
(ACCESS_DRIVER_GENERATED, LOCK_PROTOCOL_GENERATED): Likewise.
(*_client_bodies.h): Hard-code rules to write into srcdir, as
VPATH tries to build $@ locally if missing.
(util/virkeymaps.h): Likewise.
(lxc/lxc_monitor_dispatch.h): Likewise.
(access/viraccessapi*): Likewise.
(locking/lock_daemon_dispatch_stubs.h): Likewise.
* daemon/Makeflie.am (DAEMON_GENERATED, remote_dispatch.h):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
fixup DAEMON_GENERATED
Automake has builtin support to prevent botched conditional nesting,
but only if you use:
if FOO
else !FOO
endif !FOO
An example error message when using the wrong name:
daemon/Makefile.am:378: error: else reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
daemon/Makefile.am:381: error: endif reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
As our makefiles tend to have quite a bit of nested conditionals,
it's better to take advantage of the benefits of the build system
double-checking that our conditionals are well-nested, but that
requires a syntax check to enforce our usage style.
Alas, unlike C preprocessor and spec files, we can't use indentation
to make it easier to see how deeply nesting goes.
* cfg.mk (sc_makefile_conditionals): New rule.
* daemon/Makefile.am: Enforce the style.
* gnulib/tests/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Makefiles are another easy file to enforce line limits.
Mostly straightforward; interesting tricks worth noting:
src/Makefile.am: $(confdir) was already defined, use it in more places
tests/Makefile.am: path_add and VG required some interesting compression
* cfg.mk (sc_prohibit_long_lines): Add another test.
* Makefile.am: Fix offenders.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a new 'access_drivers' config parameter to the libvirtd.conf
configuration file. This allows admins to setup the default
access control drivers to use for API authorization. The same
driver is to be used by all internal drivers & APIs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Automake already passes all CFLAGS to the linker too, so it
is not necessary to set WARN_LDFLAGS in addition to the
WARN_CFLAGS variable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are many declared options in gendispatch.pl that were
no longer used. Those which were used were obscure '-b', '-k'
and '-d'. Switch to use --mode={debug|client|server}.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
By passing the flags -z relro -z now to the linker, we can force
it to resolve all library symbols at startup, instead of on-demand.
This allows it to then make the global offset table (GOT) read-only,
which makes some security attacks harder.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
PIE (position independent executable) adds security to executables
by composing them entirely of position-independent code (PIC. The
.so libraries already build with -fPIC. This adds -fPIE which is
the equivalent to -fPIC, but for executables. This for allows Exec
Shield to use address space layout randomization to prevent attackers
from knowing where existing executable code is during a security
attack using exploits that rely on knowing the offset of the
executable code in the binary, such as return-to-libc attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I did a build --without-libvirtd, then ran 'make dist'. The
resulting tarball was broken, with a complaint that make did not
know how to create libvirtd.service.in. I traced it to a use
of EXTRA_DIST inside a conditional.
* daemon/Makefile.am (EXTRA_DIST): Hoist libvirtd.service.in
outside of WITH_LIBVIRTD conditional.
https://bugzilla.redhat.com/show_bug.cgi?id=887017 reports that
even though libvirt attempts to set fs.aio-max-nr via sysctl,
the file was installed with the wrong name and gets ignored by
sysctl. Furthermore, 'man systcl.d' recommends that packages
install into hard-coded /usr/lib/sysctl.d (even when libdir is
/usr/lib64), so that sysadmins can use /etc/sysctl.d for overrides.
* daemon/Makefile.am (install-sysctl, uninstall-sysctl): Use
correct location.
* libvirt.spec.in (network_files): Reflect this.
See also commit 66ff2dd, where we avoided installing these files
as executables.
* daemon/Makefile.am (libvirtd.service): Drop chmod.
* tools/Makefile.am (libvirt-guests.service): Likewise.
* src/Makefile.am (virtlockd.service, virtlockd.socket):
Likewise.
We had several different styles of .in conversion in our Makefiles:
ALLCAPS, @ALLCAPS@, @lower@, ::lower::
Canonicalize on one form, to make it easier to copy and paste
between .in files.
Also, we were using some non-portable sed constructs: \@ is an
undefined escape sequence (it happens to be @ itself in GNU sed,
but POSIX allows it to mean something else), as well as risky
behavior (failure to consistently quote things means a space
in $(sysconfdir) could throw things off; also, Autoconf recommends
using | rather than , or ! in the s||| operator, because | has to
be quoted in shell and is therefore less likely to appear in file
names than , or !).
Fix all of these uses to follow the same syntax.
* daemon/libvirtd.8.in: Switch to @var@.
* tools/virt-xml-validate.in: Likewise.
* tools/virt-pki-validate.in: Likewise.
* src/locking/virtlockd.init.in: Likewise.
* daemon/Makefile.am: Prefer | over ! in sed.
(libvirtd.8): Prefer consistent substitution.
(libvirtd.init, libvirtd.service): Avoid non-portable sed.
* tools/Makefile.am (libvirt-guests.sh, libvirt-guests.init)
(libvirt-guests.service): Likewise.
(virt-xml-validate, virt-pki-validate, virt-sanlock-cleanup):
Prefer consistent capitalization.
* src/Makefile.am (virtlockd.init, virtlockd.service)
(virtlockd.socket): Prefer consistent substitution.
Patch 61299a1c fixed a long-standing pod error in the man page.
But we should be preventing these up front.
See also https://bugzilla.redhat.com/show_bug.cgi?id=870273
* tools/Makefile.am (virt-xml-validate.1, virt-pki-validate.1)
(virt-host-validate.1, virt-sanlock-cleanup.8, virsh.1): Reject
pod conversion errors.
* daemon/Makefile.am ($(srcdir)/libvirtd.8.in): Likewise.
