When starting a guest via libvirt (`virsh create --console`), early
console output was missed because the guest was started first and then
the console was attached. This patch changes this to the following
sequence:
1. create a paused transient guest
2. attach the console
3. resume the guest
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a guest via libvirt (`virsh start --console`), early
console output was missed because the guest was started first and then
the console was attached. This patch changes this to the following
sequence:
1. create a paused guest
2. attach the console
3. resume the guest
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the command line flag `--resume` to the `virsh console`
command. This resumes a paused guest after connecting to the console.
This might be handy since it's a "common" pattern to start a guest
paused, connect to the console, and then resume it so as not to miss any
console messages.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function returns how many array items were filled in, but virsh
never checked for anything other than errors. Just to make sure this
does not report invalid data, even though the only possibility would be
reporting 0 free pages, check the returned data so that possible errors
are detected.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit c35ba64d18235bfe35617cb3d6d6cc778f6d166d)
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When changing the metadata via virNetworkSetMetadata(), we can
now emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of custom
metadata.
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a domain has no snapshots and 'virsh snapshot-list' is called,
this gets all the way down to virshSnapshotListCollect() which
then collects all snapshots (none), and passes them to qsort()
which doesn't like being called with NULL:
extern void qsort (void *__base, size_t __nmemb, size_t __size,
__compar_fn_t __compar) __nonnull ((1, 4));
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/533
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The --help output of virsh and virt-admin shows supported options
and commands and as such contains new lines. Both these strings
are marked for translation btw. But the way they are formatted
now ('\n' being at the start of new line instead at the end of
the previous) makes it hard to create a syntax-check rule for
'translation message on one line' (next commit).
Reformat both strings a bit (no user visible change though).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'buf', 'sa' and 'hints' stack allocated helper variables are never
used together. Decrease the stack memory usage by scoping them off into
do-while blocks.
In this instance we do not want to use dynamic allocation as this is the
NSS module.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The 'port' buffer is passed to 'getnameinfo' which is supposed to fill
it but it's not actually later used. Drop the buffer as 'getnameinfo'
allows NULL arguments if they are not needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Break up the argument and variable declarations to the preferred style.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Use virXMLNodeGetSubelement to find needed subelements.
In virshUpdateDiskXML this commit removes the code which keeps XML
formatting tidy, but that is not needed for the code to format proper
XMLs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Fixes the following bug:
Command: `net-desc --config [--title] my_network`
Expected Output: Title/Description of persistent config
Output: Title/Description of live config
This was caused due to the usage of a single `flags` variable in
`virshGetNetworkDescription()` which ended up in a wrong enum being
passed to `virNetworkGetMetadata()` (enum being that of LIVE instead of
CONFIG).
Although the domain object has the same code, this didn't cause a problem
there because the enum values of `VIR_DOMAIN_INACTIVE_XML` and
`VIR_DOMAIN_METADATA_CONFIG` turn out to be the same (1 << 1), whereas
they are not for network equivalent ones (1 << 0, 1 << 1).
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If the CPU family/model/stepping are provided on the command line, but
the firmware is being automatically extracted from the libvirt guest,
we try to build the VMSA too early. This leads to an exception trying
to parse the firmware that has not been loaded yet. We must delay
building the VMSA in that scenario.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The SEV-ES boot measurement includes the initial CPU register state
(VMSA) and one of the fields includes the CPU identification. When
building a VMSA blob we get the CPU family/model/stepping from the
host capabilities, however, the VMSA must reflect the guest CPU not
host CPU. Thus using host capabilities is only when whe the guest
has the 'host-passthrough' CPU mode active. With 'host-model' it is
cannot be assumed host and guest match, because QEMU may not (yet)
have a named CPU model for a given host CPU.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In one of recent commits two variable were introduced (@ctxt and
@doc) that are not used. This breaks a build with clang who's
able to identify that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adds two new commands and a new option:
- 'net-desc' to show/modify network title and description.
- 'net-metadata' to show/modify network metadata.
- Option '--title' for 'net-list' to print corresponding
network titles in an additional column.
- Documentation for all the above.
- XML Fallback function `virshNetworkGetXMLFromNet` for title and
description for compatibility with hosts running older versions
of libvirtd.
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Users need to enable non-shared-storage migration, otherwise the disks
specified via '--migrate-disks' will be ignored.
Add an error message to inform the users of their wrong config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the flags declaratively as in the vast majority of cases it's a
simple binary addition if the flag exists.
In one instance there was also an additional check, which was moved up
after the new code, and the error message was fixed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are some cases left after previous commit which were not
picked up by coccinelle. Mostly, becuase the spatch was not
generic enough. We are left with cases like: two variables
declared on one line, a variable declared in #ifdef-s (there are
notoriously difficult for coccinelle), arrays, macro definitions,
etc.
Finish what coccinelle started, by hand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
This is a more concise approach and guarantees there is
no time window where the struct is uninitialized.
Generated using the following semantic patch:
@@
type T;
identifier X;
@@
- T X;
+ T X = { 0 };
... when exists
(
- memset(&X, 0, sizeof(X));
|
- memset(&X, 0, sizeof(T));
)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
There are couple of variables that are declared at function
beginning but then used solely within a block (either for() loop
or if() statement). And just before their use they are zeroed
explicitly using memset(). Decrease their scope, use struct zero
initializer and drop explicit memset().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Both virsh and virt-admin have vshControl typed variables and
also pointers to these variables. In both cases these are
declared on a single line. Do the following:
1) break declaration into two lines,
2) use struct zero initializer for vshControl and
virshControl/vshAdmControl structs,
3) drop explicit memset(.., 0, ...) ;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
When virsh connects to a non-hypervisor daemon directly (e.g.
"nodedev:///system") and user executes 'version' they are met
with an error message. This is because cmdVersion() calls
virConnectGetVersion() which fails, hence the error.
The reason for virConnectGetVersion() fail is simple - it's
documented as:
Get the version level of the Hypervisor running.
Well, there's no hypervisor in non-hypervisor daemons and thus it
doesn't make sense to provide an implementation in each driver's
virConnectDriver.hypervisorDriver table (just like we do for
other APIs, e.g. nodeConnectIsSecure()).
Given all of this, just make cmdVersion() deal with the error in
a non-fatal fashion.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Fix the syntax-check failures (which can be seen after
python3-flake8-import-order package is installed) with the help
of isort[1]:
289/316 libvirt:syntax-check / flake8 FAIL 5.24s exit status 2
[1]: https://pycqa.github.io/isort/
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add migrate options: --compression-zlib-level
--compression-zstd-level
These options are used to set compress level for "zlib"
or "zstd" during parallel migration if the compress method
is specified.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Switch from int to double for displaying job progress upto 2 decimal
places.
Signed-off-by: Shaleen Bathla <shaleen.bathla@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The qemu driver now accepts also _ULLONG as type for bigger numbers. Use
the 'virTypedParamListAddUnsigned' helper to use the bigger typed
parameter type if necessary to allow full range of the values while
preserving compatibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor to use the new data type so that we can use the APIs of it in
upcoming patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to dumpxml, let's have --xpath and --wrap to the
'domcapabilities' command since users might be interested only in
a subset of domcapabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Similarly to dumpxml, let's have --xpath and --wrap to the
'capabilities' command since users might be interested only in a
subset of capabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Remove construction of the event string from sub-strings marked as
translatable. Without context it's impossible to translate it correctly.
This slightly increases verbosity of the code but actually makes it more
readable as everything is inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extract internals of virshEventPrint into a function that can take the
format string. The function will be used in upcoming patches which make
the event formatting translatable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a version for functions which may already need to take a printf
format string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's no point in marking the protocol name as translatable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In my previous commit v9.2.0-rc1~3 I've made virt-host-validate
to report host IOMMU check pass if IORT table is present. This is
not sufficient though, because IORT describes much more than just
IOMMU (well, it's called SMMU in ARM world). In fact, this can be
seen in previous commit which adds test cases: there are tables
(IORT_virt_aarch64) which does not contain any SMMU records.
But after previous commits, we can parse the table so switch to
that.
Fixes: 2c13a2a7c9
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2178885
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In vir-host-validate we do two checks related to IOMMU:
1) hardware support, and
2) kernel support.
While users are usually interested in the latter, the former also
makes sense. And for the former (hardware support) we have this
huge if-else block for nearly every architecture, except ARM.
Now, IOMMU is called SMMU in ARM world, and while there's
certainly a definitive way of detecting SMMU support (e.g. via
dumping some registers in asm), we can work around this - just
like we do for Intel and AMD - and check for an ACPI table
presence.
In ARM world, there's I/O Remapping Table (IORT) which describes
SMMU capabilities on given host and is exposed in sysfs
(regardless of arm_smmu module).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2178885
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some APIs (migration, save/restore, snapshot, ...) require a domain to
be suspended temporarily. In case resuming the domain fails, the domain
will be unexpectedly left paused when the API finishes. This situation
is reported via VIR_DOMAIN_EVENT_SUSPENDED event with
VIR_DOMAIN_EVENT_SUSPENDED_API_ERROR detail. But we do not have a
corresponding reason for VIR_DOMAIN_PAUSED state and the reason would
remain set to the value used when the domain was paused. So the state
reason would suggest the operation is still running.
This patch changes the state reason to a new VIR_DOMAIN_PAUSED_API_ERROR
to make it clear the API that paused the domain already finished, but
failed to resume the domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
