The processing code which prepares images should be executed really only
for the images which were detected. The code actually tried to update
the last user-specified layer as well. Thankfully we don't do anything
that would be a problem at this point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1515533
The @prefix attribute to <ip/> element for interface type user is
optional. Therefore, if left out it has value of zero in which
case we should not check whether it falls into <4, 27> range.
Otherwise we fail parsing domain XML for no good reason.
Broken by commit b62b8090b2.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Once we called qemuDomainObjEnterRemote to talk to the destination
daemon during a peer to peer migration, the vm lock is released and we
only hold an async job. If the source domain dies at this point the
monitor EOF callback is allowed to do its job and (among other things)
clear all private data irrelevant for stopped domain. Thus when we call
qemuDomainObjExitRemote, the domain may already be gone and we should
avoid touching runtime private data (such as current job info).
In other words after acquiring the lock in qemuDomainObjExitRemote, we
need to check the domain is still alive. Unless we're doing offline
migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1589730
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The variable is used to store the offline migration capability of the
destination daemon. Let's call it 'dstOffline' so that we can later use
'offline' to indicate whether we were asked to do offline migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1541921
In TCG mode, there are no vCPU threads and thus there's nothing
to be placed into resctrl group. Forbid such configuration.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If we ever fail to properly set jobinfo->statsType,
qemuDomainJobInfoToParams would return -1 without setting an error.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1585108
When updating a live device users might pass different alias than
the one the device has. Currently, this is silently ignored which
goes against our behaviour for other parts of the device where we
explicitly allow only certain changes and error out loudly on
anything else.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This was lost in c57f3fd2f8. But now we are going to
need it again (except the DETACH action where checking for device
compatibility does not make much sense anyway).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When updating device it's worth parsing live info too as users
might want to update it as well.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Mediated devices of model 'vfio-ccw' are using CCW addresses, so make
sure to call the correct address preparation code for the model.
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Remove the callbacks that the nwfilter driver registers with the domain
object config layer. Instead make the current helper methods call into
the public API for creating/deleting nwfilter bindings.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the nwfilter driver keeps a list of bindings that it has
created, there is no need for the complex virt driver callbacks. It is
possible to simply iterate of the list of recorded filter bindings.
This means that rebuilding filters no longer has to acquire any locks on
the virDomainObj objects, as they're never touched.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add comma escaping for netsource. This is done here because
qemuBuildNetworkDriveStr has other external callers which
may not expect an escaped comma; however, this particular
command building path needs to perform the escaping for the
hostdev command line, so we do it now to ensure src->path
and src->host->name are covered.
Signed-off-by: Anya Harter <aharter@redhat.com>
If a thread is unable to acquire a job (e.g. because of timeout)
an error is reported and the error message contains reference to
the other thread holding the job. Well, the error message should
report agent job too as it is yet another source of possible
failure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This doesn't seem very useful at the moment, but it will make
sense once we introduce another HPT-related setting.
The output XML is decoupled from the input XML in preparation
of future changes as well; while doing so, we can shave a few
lines off the latter.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We're going to introduce a second HPT-related setting soon,
at which point using a single location to store everything is
no longer going to cut it.
This mostly, but not completely, reverts 3dd1eb3b26.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The UNIX socket FDs were we passing to QEMU inherited a label based on
libvirtd's context. QEMU is thus denied ability to access the UNIX
socket. We need to use the security manager to change our current
context temporarily when creating the UNIX socket FD.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a thread is unable to start a job (e.g. because of timeout)
a warning is printed into the logs. So far, the message does not
contain agent job info. Add it as it might help future debugging.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
As qemuMonitorJSONIOProcess will call qemuMonitorJSONIOProcessEvent
which unlocks the monitor mutex, there is some extreme situation,
eg qemu send message to monitor twice in a short time, where the
local viriable 'msg' of qemuMonitorIOProcess could be a wild point:
1. qemuMonitorSend() assign mon->msg to parameter 'msg', which is alse a
local variable of its caller qemuMonitorJSONCommandWithFd(), cause
eventloop to send message to monitor, then wait condition.
2. qemu send message to monitor for the first time immediately.
3. qemuMonitorIOProcess() is called, then wake up the qemuMonitorSend()
thread, but the qemuMonitorSend() thread stuck for a while as cpu pressure
or some other reasons, which means the qemu monitor is still unlocked.
4. qemu send event message to monitor for the second time,
such as RTC_CHANGE event
5. qemuMonitorIOProcess() is called again, the local viriable 'msg' is
assigned to mon->msg.
6. qemuMonitorIOProcess() call qemuMonitorJSONIOProcess() to deal with
the qemu event.
7. qemuMonitorJSONIOProcess() unlock the qemu monitor in the macro
'QEMU_MONITOR_CALLBACK', then qemuMonitorSend() thread get the mutex
and free the mon->msg, assign mon->msg to NULL.
Signed-off-by: Weilun Zhu <zhuweilun@huawei.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1591628
Attempting to use the FORCE flag for snapshot-revert was resulting
in failures because qemuProcessStart and qemuProcessStartCPUs were
using QEMU_ASYNC_JOB_START after a qemuProcessStop resulting in an
error when entering the monitor:
error: internal error: unexpected async job 6 type expected 0
So create a local @jobType, initialize to QEMU_ASYNC_JOB_START, and
change to QEMU_ASYNC_JOB_NONE if we end up in the --force path
where the qemuProcessStop is run before a Start and StartCPUs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
If the the snapshot revert involves a forced revert option, then
let's not cause startup to change the genid flag in order to signify
that we're still running the same/previous guest and not some
snapshot reversion.
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1149445
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Use and set the @start_flags at the top of the RUNNING and PAUSED
transitions to GEN_VMID | PAUSED.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Promote the @start_flags to the top of the function, a
subsequent patch needs to use it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Make it clearer what asyncJob type was passed and what was expected.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
VMs with hardcoded platform network devices are forced to use old
style '-net nic' command line config. Current we use qemu's vlan
option to hook this with the '-netdev' host side of things.
However since qemu 1.2 there is '-net nic,netdev=X' option for
explicitly referencing a netdev ID, which is more inline with
typical VM commandlines, so let's switch to that
Signed-off-by: Cole Robinson <crobinso@redhat.com>
There are two sets of functions here:
1) some functions talk on both monitor and agent monitor,
2) some functions only talk on agent monitor.
For functions from set 1) we need to use
qemuDomainObjBeginJobWithAgent() and for functions from set 2) we
need to use qemuDomainObjBeginAgentJob() only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that we have agent job we can grab it while freezing/thawing
guest file system before/after doing snapshot.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The point is to break QEMU_JOB_* into smaller pieces which
enables us to achieve higher throughput. For instance, if there
are two threads, one is trying to query something on qemu
monitor while the other is trying to query something on agent
monitor these two threads would serialize. There is not much
reason for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce guest agent specific job categories to allow threads to
run agent monitor specific jobs while normal monitor jobs can
also be running.
Alter _qemuDomainJobObj in order to duplicate certain fields that
will be used for guest agent specific tasks to increase
concurrency and throughput and reduce serialization.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Be more consistent and use 'preparing' instead of 'prepare' here.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When commit 6718132d enforced usage of the cleanup label, it forgot to
set the @ret variable to 0 on "success" exit path.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If measurement retrieval fails we'd forget to call ExitMonitor to unlock
the monitor.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reported-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Since it's being called with QEMU_ASYNC_JOB_NONE which is what
qemuDomainObjEnterMonitor is going to use with the internal helper,
let's use that one instead.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1552092
If there's a long running job it might cause us to wait 30
seconds before we give up acquiring the job. This is problematic
to interactive applications that fetch stats repeatedly every few
seconds.
The solution is to introduce
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag which tries to
acquire job but does not wait if acquiring failed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The aim of this API is to allow the caller to do best effort.
Some functions can work even when acquiring the job fails (e.g.
qemuConnectGetAllDomainStats()). But what they can't bear is
delay if they have to wait up to 30 seconds for each domain that
is processing some other job.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The variable is initialized to -1 already. There's no way it can
be overwritten by the time control gets to the line I'm removing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Provide a small comment on the function and its parameters.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for cfg->spiceTLSx509certdir and
graphics->data.spice.rendernode.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for smartcard->data.cert.file[i] and
smartcard->data.cert.database.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for dev->data.file.path in cases
VIR_DOMAIN_CHR_TYPE_DEV and VIR_DOMAIN_CHR_TYPE_PIPE.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Fix the return value status comparison checking for call to
virJSONValueObjectCreateVArgs introduced by commit id f0a23c0c3.
If a NULL arglist is passed, then a 0 is returned which is a
valid status and we only should fail when the return is < 0.
This resolves an issue seen for "virsh iothreadadd $dom $iothread"
where a "error: An error occurred, but the cause is unknown" error
was generated when trying to hotplug an IOThread to a domain since
qemuDomainHotplugAddIOThread passes a NULL arglist.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1591561
For reasons I don't understand my original patch of 75f0fd5112
freed not only the chardev from domain but also the one from
passed virDomainDeviceDefPtr. This caused no troubles until now,
because those two pointers were separate, but after I've
introduced virDomainDetachDeviceAlias() they became the same
resulting in double free on detach.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The query-sev-capabilities command fails if SEV is not compiled in,
even though both the command and -object sev-guest are present
in that case :/
Ignore the errors to avoid spamming the logs:
internal error: unable to execute QEMU command 'query-sev-capabilities': SEV feature is not available
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Some identifiers use Sev, some SEV. Prefer the latter.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A common cleanup path for both the success and the error case.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Make the function prefix match the file it's in.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Free tmp even on failure.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It is only used in one place.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The buffer is not freed anywhere. Nor in the error paths. Also
the usage virCommand with respect to buffer is very odd.
==2504== 1,100 bytes in 1 blocks are definitely lost in loss record 167 of 175
==2504== at 0x4C2CE3F: malloc (vg_replace_malloc.c:298)
==2504== by 0x4C2F1BF: realloc (vg_replace_malloc.c:785)
==2504== by 0x5D32EE2: virReallocN (viralloc.c:245)
==2504== by 0x5D37278: virBufferGrow (virbuffer.c:150)
==2504== by 0x5D3783E: virBufferVasprintf (virbuffer.c:408)
==2504== by 0x5D377A9: virBufferAsprintf (virbuffer.c:381)
==2504== by 0x57017C1: qemuBuildSevCommandLine (qemu_command.c:9707)
==2504== by 0x57030F7: qemuBuildCommandLine (qemu_command.c:10324)
==2504== by 0x575FA48: qemuProcessCreatePretendCmd (qemu_process.c:6644)
==2504== by 0x11351A: testCompareXMLToArgv (qemuxml2argvtest.c:564)
==2504== by 0x1392F7: virTestRun (testutils.c:180)
==2504== by 0x137895: mymain (qemuxml2argvtest.c:2900)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The variable points to a buffer not a domain object therefore its
current name is misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
And replace all calls with virObjectEventStateQueue such that:
qemuDomainEventQueue(driver, event);
becomes:
virObjectEventStateQueue(driver->domainEventState, event);
And remove NULL checking from all callers.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
qemucapabilitiestest for simplicity uses one test monitor object for
simulating work of two separate inquiries of the qemu process. To allow
better testing in the future it will be required to reset the counter
so that it accurately simulates how qemu would behave.
This patch adds a private monitor API which allows to reset the counter
which will be usable only in tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since virConfGetValueBool() can return earlier, the parameter 'value'
might be not initialised properly inside this method. Another proof:
Valgrind is returning this error during the libvirtd daemon startup:
==16199== Conditional jump or move depends on uninitialised value(s)
==16199== at 0x27FFFEF4: virQEMUDriverConfigLoadFile (qemu_conf.c:809)
==16199== by 0x2807665C: qemuStateInitialize (qemu_driver.c:654)
==16199== by 0x5535428: virStateInitialize (libvirt.c:662)
==16199== by 0x12AED8: daemonRunStateInit (remote_daemon.c:802)
==16199== by 0x536DE18: virThreadHelper (virthread.c:206)
==16199== by 0x6CB36DA: start_thread (pthread_create.c:463)
==16199== by 0x6FEC88E: clone (clone.S:95)
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch implements the internal driver API for launch event into
qemu driver. When SEV is enabled, execute 'query-sev-launch-measurement'
to get the measurement of memory encrypted through launch sequence.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU >= 2.12 provides 'sev-guest' object which is used to launch encrypted
VMs on AMD platform using SEV feature. The various inputs required to
launch SEV guest is provided through the <launch-security> tag. A typical
SEV guest launch command line looks like this:
-object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 ...\
-machine memory-encryption=sev0 \
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU uses /dev/sev device while creating the SEV guest, lets add /dev/sev
in the list of devices allowed to be accessed by the QEMU.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extend hypervisor capabilities to include sev feature. When available,
hypervisor supports launching an encrypted VM on AMD platform. The
sev feature tag provides additional details like Platform Diffie-Hellman
(PDH) key and certificate chain which can be used by the guest owner to
establish a cryptographic session with the SEV firmware to negotiate
keys used for attestation or to provide secret during launch.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU version >= 2.12 provides support for launching an encrypted VMs on
AMD x86 platform using Secure Encrypted Virtualization (SEV) feature.
This patch adds support to query the SEV capability from the qemu.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1583623
When attaching a virtio-scsi with IOThreads for the config of a
live domain, allow the <address> to not be defined thus allowing
post parse processing to fill in the address. This allows parsing
of an individual device to succeed for attach config.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the error a bit clearer that virtio-scsi IOThreads require
virtio pci or ccw controller address types.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix the error message to indicate what exactly is failing - that
the controller index provided matches an existing controller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit id '7ef0471bf' added a new parameter to qemuMonitorOpen,
but didn't update the ATTTRIBUTE_NONNULL for the @cb (param 5).
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Katerina Koukiou <kkoukiou@redhat.com>
On start up of libvirtd the worker pool of the QEMU driver must be
initialized before trying to reconnect to all the running QEMU
instances. Otherwise segmentation faults can occur if there are QEMU
monitor events emitted.
#0 __GI___pthread_mutex_lock
#1 0x000003fffdba9e62 in virMutexLock
#2 0x000003fffdbab2dc in virThreadPoolSendJob
#3 0x000003ffd8343b70 in qemuProcessHandleSerialChanged
#4 0x000003ffd836a776 in qemuMonitorEmitSerialChange
#5 0x000003ffd8378e52 in qemuMonitorJSONHandleSerialChange
#6 0x000003ffd8378930 in qemuMonitorJSONIOProcessEvent
#7 0x000003ffd837edee in qemuMonitorJSONIOProcessLine
#8 0x000003ffd837ef86 in qemuMonitorJSONIOProcess
#9 0x000003ffd836757a in qemuMonitorIOProcess
#10 0x000003ffd836863e in qemuMonitorIO
#11 0x000003fffdb4033a in virEventPollDispatchHandles
#12 0x000003fffdb4055e in virEventPollRunOnce
#13 0x000003fffdb3e782 in virEventRunDefaultImpl
#14 0x000003fffdc89400 in virNetDaemonRun
#15 0x000000010002a816 in main
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The default is stable per machine type so there should be no need to keep that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1469338
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For getting the reply I queried the newest and oldest QEMU using
test/qemucapsprobe. From the differences I only extracted the reply to the new
QMP command and discarded the rest. For all the versions below the one which
added support for the new option I used the output from the oldest QEMU release
and for those that support it I used the output from the newest one.
In order to make doubly sure the reply is where it is supposed to be (the
replies files are very forgiving) I added the property to all the replies files,
reran the tests again and fixed the order in replies files so that all the
versions are reporting the new capability. Then removed that one property.
After that I used test/qemucapsfixreplies to fix the reply IDs.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
One of the things that this is improving is the fact that instead of error
message (that was wrong) you get when starting a domain with SMM and i440fx we
allow the setting to go through. SMM option exists and makes sense on i440fx as
well (basically whenever that _SMM_OPT capability is set).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are still hoping all of such checks will be moved there and this is one small
step in that direction.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid problems with test cases specifying an alias machine type which
would change once capabilities for a newer version are added strip all
alias machine types for the DO_TEST_CAPS_LATEST based tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Previous patch naively removed all code relevant to disk format
checking. The semantics now dictate that the format check when creating
external snapshots is now impossible as we always fill in the format for
disks in domain definition in the post-parse callback.
Remove the impossible code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The option is insecure and it has been long enough for users to migrate
their disk files to use explicit format. Drop the option and related
code.
The config parser still parses it and rejects statup if it's still
present in the config in enabled state.
The augeas lens is also kept so that users can disable it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu_tpm.c is not calling any capng_* functions. Let's drop this
include then. This also fixes a build failure without capng.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
swtpm_setup can be run for a TPM 2 in unprivileged mode assuming
XDG_CONFIG_HOME has been set and the necessary configuration files
have been put into that directory.
For current reference also see this link:
https://github.com/stefanberger/swtpm/pull/63
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the external swtpm to the emulator cgroup so that upper limits of CPU
usage can be enforced on the emulated TPM.
To enable this we need to have the swtpm write its process id (pid) into a
file. We then read it from the file to configure the emulator cgroup.
The PID file is created in /var/run/libvirt/qemu/swtpm:
[root@localhost swtpm]# ls -lZ /var/run/libvirt/qemu/swtpm/
total 4
-rw-r--r--. 1 tss tss system_u:object_r:qemu_var_run_t:s0 5 Apr 10 12:26 1-testvm-swtpm.pid
srw-rw----. 1 qemu qemu system_u:object_r:svirt_image_t:s0:c597,c632 0 Apr 10 12:26 1-testvm-swtpm.sock
The swtpm command line now looks as follows:
root@localhost testvm]# ps auxZ | grep swtpm | grep socket | grep -v grep
system_u:system_r:virtd_t:s0:c597,c632 tss 18697 0.0 0.0 28172 3892 ? Ss 16:46 0:00 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/1-testvm-swtpm.sock,mode=0600 --tpmstate dir=/var/lib/libvirt/swtpm/485d0004-a48f-436a-8457-8a3b73e28568/tpm1.2/ --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --pid file=/var/run/libvirt/qemu/swtpm/1-testvm-swtpm.pid
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch extends the TPM's device XML with TPM 2.0 support. This only works
for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
</tpm>
The swtpm process now has --tpm2 as an additional parameter:
system_u:system_r:svirt_t:s0:c597,c632 tss 18477 11.8 0.0 28364 3868 ? Rs 11:13 13:50 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm2,mode=0640 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --tpm2 --pid file=/var/run/libvirt/qemu/swtpm/testvm-swtpm.pid
The version of the TPM can be changed and the state of the TPM is preserved.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In this patch we label the swtpm process with SELinux labels. We give it the
same label as the QEMU process has. We label its state directory and files
as well. We restore the old security labels once the swtpm has terminated.
The file and process labels now look as follows:
Directory: /var/lib/libvirt/swtpm
[root@localhost swtpm]# ls -lZ
total 4
rwx------. 2 tss tss system_u:object_r:svirt_image_t:s0:c254,c932 4096 Apr 5 16:46 testvm
[root@localhost testvm]# ls -lZ
total 8
-rw-r--r--. 1 tss tss system_u:object_r:svirt_image_t:s0:c254,c932 3648 Apr 5 16:46 tpm-00.permall
The log in /var/log/swtpm/libvirt/qemu is labeled as follows:
-rw-r--r--. 1 tss tss system_u:object_r:svirt_image_t:s0:c254,c932 2237 Apr 5 16:46 vtpm.log
[root@localhost 485d0004-a48f-436a-8457-8a3b73e28567]# ps auxZ | grep swtpm | grep ctrl | grep -v grep
system_u:system_r:svirt_t:s0:c254,c932 tss 25664 0.0 0.0 28172 3892 ? Ss 16:57 0:00 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm1.2 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log
[root@localhost 485d0004-a48f-436a-8457-8a3b73e28567]# ps auxZ | grep qemu | grep tpm | grep -v grep
system_u:system_r:svirt_t:s0:c254,c932 qemu 25669 99.0 0.0 3096704 48500 ? Sl 16:57 3:28 /bin/qemu-system-x86_64 [..]
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator'/>
</tpm>
The XML will currently only start a TPM 1.2.
Upon first start, libvirt will run `swtpm_setup`, which will simulate the
manufacturing of a TPM and create certificates for it and write them into
NVRAM locations of the emulated TPM.
After that libvirt starts the swtpm TPM emulator using the `swtpm` executable.
Once the VM terminates, libvirt uses the swtpm_ioctl executable to gracefully
shut down the `swtpm` in case it is still running (QEMU did not send shutdown)
or clean up the socket file.
The above mentioned executables must be found in the PATH.
The executables can either be run as root or started as root and switch to
the tss user. The requirement for the tss user comes through 'tcsd', which
is used for the simulation of the manufacturing. Which user is used can be
configured through qemu.conf. By default 'tss' is used.
The swtpm writes out state into files. The state is kept in /var/lib/libvirt/swtpm:
[root@localhost libvirt]# ls -lZ | grep swtpm
drwx--x--x. 7 root root unconfined_u:object_r:virt_var_lib_t:s0 4096 Apr 5 16:22 swtpm
The directory /var/lib/libvirt/swtpm maintains per-TPM state directories.
(Using the uuid of the VM for that since the name can change per VM renaming but
we need a stable directory name.)
[root@localhost swtpm]# ls -lZ
total 4
drwx------. 2 tss tss system_u:object_r:virt_var_lib_t:s0 4096 Apr 5 16:46 485d0004-a48f-436a-8457-8a3b73e28568
[root@localhost 485d0004-a48f-436a-8457-8a3b73e28568]# ls -lZ
total 4
drwx------. 2 tss tss system_u:object_r:virt_var_lib_t:s0 4096 Apr 10 21:34 tpm1.2
[root@localhost tpm1.2]# ls -lZ
total 8
-rw-r--r--. 1 tss tss system_u:object_r:virt_var_lib_t:s0 3648 Apr 5 16:46 tpm-00.permall
The directory /var/run/libvirt/qemu/swtpm/ hosts the swtpm.sock that
QEMU uses to communicate with the swtpm:
root@localhost domain-1-testvm]# ls -lZ
total 0
srw-------. 1 qemu qemu system_u:object_r:svirt_image_t:s0:c597,c632 0 Apr 6 10:24 1-testvm-swtpm.sock
The logfile for the swtpm is in /var/log/swtpm/libvirt/qemu:
[root@localhost-3 qemu]# ls -lZ
total 4
-rw-------. 1 tss tss unconfined_u:object_r:var_log_t:s0 2199 Apr 6 14:01 testvm-swtpm.log
The processes are labeled as follows:
[root@localhost 485d0004-a48f-436a-8457-8a3b73e28567]# ps auxZ | grep swtpm | grep socket | grep -v grep
system_u:system_r:virtd_t:s0-s0:c0.c1023 tss 18697 0.0 0.0 28172 3892 ? Ss 16:46 0:00 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/1-testvm-swtpm.sock,mode=0600 --tpmstate dir=/var/lib/libvirt/swtpm/485d0004-a48f-436a-8457-8a3b73e28568/tpm1.2 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log
[root@localhost 485d0004-a48f-436a-8457-8a3b73e28567]# ps auxZ | grep qemu | grep tpm | grep -v grep
system_u:system_r:svirt_t:s0:c413,c430 qemu 18702 2.5 0.0 3036052 48676 ? Sl 16:46 0:08 /bin/qemu-system-x86_64 [...]
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement functions for managing the storage of the external swtpm as well
as starting and stopping it. Also implement functions to use swtpm_setup,
which simulates the manufacturing of a TPM, which includes creation of
certificates for the device.
Further, the external TPM needs storage on the host that we need to set
up before it can be run. We can clean up the host once the domain is
undefined.
This patch also implements a small layer for external device support that
calls into the TPM device layer if a domain has an attached TPM. This is
the layer we will wire up later on.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extend qemu_conf with user and group for running the tpm-emulator
and add directories to the configuration for the locations of the
log, state, and socket of the tpm-emulator.
Also add these new directories to the QEMU Makefile.inc.am and
the RPM spec file libvirt.spec.in.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extend the QEMU capabilities with tpm-emulator support.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator'/>
</tpm>
The XML will currently only define a TPM 1.2.
Extend the documentation.
Add a test case testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit id 02b031a4 added a secondary path from which the
incoming @secinfo would not be free'd until the private
data was freed in qemuDomainStorageSourcePrivateDispose.
However, by doing this the original intention to free
@*secinfo afterwards is lost and thus the pass by value
of the secinfo->s.aes (or secinfo->s.plain for its method)
results in not keeping the NULL setting in the various
secret.{username|iv|ciphertext} fields upon return to
qemuDomainSecretInfoClear and eventually will result in
a double free at domain destroy:
raise ()
abort ()
__libc_message ()
malloc_printerr ()
_int_free ()
virFree
qemuDomainSecretAESClear
qemuDomainSecretInfoClear
qemuDomainSecretInfoFree
qemuDomainStorageSourcePrivateDispose
virObjectUnref
virStorageSourceClear
virStorageSourceFree
virDomainDiskDefFree
virDomainDefFree
virDomainObjRemoveTransientDef
qemuProcessStop
qemuDomainDestroyFlags
virDomainDestroy
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Instead of array of pointers to individual buffers it can be
array of buffers directly. This also fixes the following memleak:
==22516== 96 bytes in 4 blocks are definitely lost in loss record 166 of 195
==22516== at 0x4C2EF26: calloc (vg_replace_malloc.c:711)
==22516== by 0x5D2C7D5: virAlloc (viralloc.c:144)
==22516== by 0x56FAABD: qemuBuildNumaArgStr (qemu_command.c:7543)
==22516== by 0x5701835: qemuBuildCommandLine (qemu_command.c:10112)
==22516== by 0x575D794: qemuProcessCreatePretendCmd (qemu_process.c:6568)
==22516== by 0x113338: testCompareXMLToArgv (qemuxml2argvtest.c:549)
==22516== by 0x138CA3: virTestRun (testutils.c:180)
==22516== by 0x136CD1: mymain (qemuxml2argvtest.c:2825)
==22516== by 0x13AD58: virTestMain (testutils.c:1118)
==22516== by 0x137351: main (qemuxml2argvtest.c:2874)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function exists because of 5276ec712a. But it is
missing initial check just like virQEMUCapsInitHostCPUModel()
has.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When the agent code was first introduced back in
commit c160ce3316
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Oct 5 18:31:54 2011 +0100
QEMU guest agent support
there was code that would loop and retry the connection when opening
the agent socket. At this time, the only thing done in between the
opening of the monitor socket & opening of the agent socket was a
call to set the monitor capabilities. This was a no-op on non-QMP
versions, so in theory there could be a race which let us connect
to the monitor while the agent socket was still not created by QEMU.
In the modern world, however, we long ago mandated the use of QMP
for managing QEMU, so we're guaranteed to have a set capabilities
QMP call. Once we've seen a reply to this, we're guaranteed that
QEMU has fully initialized all backends and is in its event loop.
We can thus be sure the QEMU agent socket is present and don't need
to retry connections to it, even without having the chardev FD passing
feature.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since libvirt called bind() and listen() on the UNIX socket, it is
guaranteed that connect() will immediately succeed, if QEMU is running
normally. It will only fail if QEMU has closed the monitor socket by
mistake or if QEMU has exited, letting the kernel close it.
With this in mind we can remove the retry loop and timeout when
connecting to the QEMU monitor if we are doing FD passing. Libvirt can
go straight to sending the QMP greeting and will simply block waiting
for a reply until QEMU is ready.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a race condition when spawning QEMU where libvirt has spawned
QEMU but the monitor socket is not yet open. Libvirt has to repeatedly
try to connect() to QEMU's monitor until eventually it succeeds, or
times out. We use kill() to check if QEMU is still alive so we avoid
waiting a long time if QEMU exited, but having a timeout at all is still
unpleasant.
With QEMU 2.12 we can pass in a pre-opened FD for UNIX domain or TCP
sockets. If libvirt has called bind() and listen() on this FD, then we
have a guarantee that libvirt can immediately call connect() and
succeed without any race.
Although we only really care about this for the monitor socket and agent
socket, this patch does FD passing for all UNIX socket based character
devices since there appears to be no downside to it.
We don't do FD passing for TCP sockets, however, because it is only
possible to pass a single FD, while some hostnames may require listening
on multiple FDs to cover IPv4 and IPv6 concurrently.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU >= 2.12 will support passing of pre-opened file descriptors for
socket based character devices.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The code that detaches the device from persistent definition copies the
persistent definition first so that it can easily be rolled back. The
actual detaching is then made in the copy which is assigned back on
success (if the live operation succeeded as well).
This is not the case in qemuDomainDetachDeviceAliasLiveAndConfig where
the definition was copied and put back, but the detaching happened from
the other object which was overwritten.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Now that GnuTLS is a requirement, we can drop a lot of
conditionally built code. However, not all ifdef-s can go because
we still want libvirt_setuid to build without gnutls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that virCryptoGenerateRandom() is plain wrapper over
virRandomBytes() we can drop it in favour of the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To unify our vir*Random() functions we need to make
virCryptoGenerateRandom NOT allocate return buffer. It should
just fill given buffer with random data.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt relies on being able to kill the destination domain and resume
the source one during migration until we called "cont" on the
destination. Unfortunately, QEMU automatically activates block devices
at the end of migration even when it's called with -S. This wasn't a big
issue in the past since the guest is not running and thus no data are
written to the block devices. However, when QEMU introduced its internal
block device locks, we can no longer resume the source domain once the
destination domain already activated the block devices (and thus
acquired all locks) unless the destination domain is killed first.
Since it's impossible to synchronize the destination and the source
libvirt daemons after a failed migration, QEMU introduced a new
migration capability called "late-block-activate" which ensures QEMU
won't activate block devices until it gets "cont". The only thing we
need to do is to enable this capability whenever QEMU supports it.
https://bugzilla.redhat.com/show_bug.cgi?id=1568407
QEMU commit implementing the capability: v2.12.0-952-g0f073f44df
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have one place that sets up all disk-related objects to
qemuBlockStorageSourceAttachDataPtr we can easily reuse the data in the
command-line formatter by implementing a worker which will convert the
data.
A huge advantage is that it will be way easier to integrate this with
-blockdev later on.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a new setup function for all the related configuration and
move the setup and attachment of the PR code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Create a new "Prepare" function and move the drive add code into the new
helpers. This will eventually allow to simplify and unify the attaching
code for use with blockdev at the same time as providing compatibility
with older qemus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add code that will handle the managed persistent reservations object
separately from the unmanaged one. There is only one managed object so
handling it with disks is awkward and does not scale well when backing
chains come into view.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Also since we don't do any conditional formatting, fix the comment for
the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the old qcow2 encryption is removed we can safely delete all
this code since it's not needed any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The encryption was buggy and qemu actually dropped it upstream. Forbid
it for all versions since it would cause other problems too.
Problems with the old encryption include weak crypto, corruption of
images with blockjobs and a lot of usability problems.
This requires changing of the encryption type for the encrypted disk
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to check if TLS is enabled as the variable is a tristate.
Currently we'd setup TLS even if it was explicitly turned off.
Thankfully TLS for disks was only used with the vxhs protocol so hardly
anybody would ever be able to hit the problem.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Disks are client-only so we don't need to have this variable. We also
always pass false for 'isListen' to qemuBuildTLSx509BackendProps for all
disk-related code-paths so the 'tlsVerify' is ignored anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To keep feature parity, we need to be able to format the PR manager
alias when using blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Note that it's okay to pass NULL to qemuDomainDelTLSObjects in
qemuDomainAddTLSObjects as the tls-creds-x509 object was either not
created or qemu crashed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new monitor command internal API to allow wrapping of the object
name and alias into the JSON props so that they don't have to be passed
out of band.
The new API also takes a double pointer so that it can be cleared when
the value is consumed so that it does not need to happen in every single
caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
s/virQEMUBuildObjectCommandlineFromJSON/virQEMUBuildObjectCommandlineFromJSONType/
The function adds the object of a certain type. Change the name so that
we make room for the generic function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function adds the object of a certain type. Change the name so that
we make room for the generic function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function generates JSON properties rather than a string so rename
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'secinfo' is present also for migrations. Delete the misleading comment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Setting up the 'secinfo' for the TLS private key password also generates
the given alias, so we don't need to generate another one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The alias of the secret for decrypting the TLS passphrase is useless
besides for TLS setup. Stop passing it around.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We make sure that the disk supports TLS when preparing the environment
so there's no need to duplicate checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Callers need to know the alias anyways so it does not make much sense to
generate it inside of this function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBuildTLSx509CommandLine has no business guessing which alias should
be used. The alias needs to be passed in.
Note that there's a lingering bad design of this, since the secret
object alias is based on the device name and not on the fact that the
secret is used for decrypting of the TLS private key. If we ever add
authentication for chardevs this will bite us.
Thankfully disk code does not support encrypted private keys for TLS so
it can be happily refactored there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the TLS object alias setup earlier. Also make sure that the alias
is not overwritten on hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For some reason the function returned an error if secAlias was not
passed in. It's not an error, in fact it's desired.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Select protocol using a switch with all cases enumerated. This will
simplify checking unsupported protocols and adding new support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the loop from qemuDomainPrepareDiskSourceTLS and rename it to
qemuDomainPrepareStorageSourceTLS. Currently there is no backing chain
to prepare so fixing one device is equivalent. In the future it will be
reused in a function which will do the looping.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the code into a separate function so that all steps for a
storage protocol are contained and the original function is easily
extendable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using blockdev the approach to base aliases will change. Add a
helper function that will aggregate all code which needs to be called
with the disk alias for the -drive to setup internal data.
qemuDomainSecretDiskPrepare wrapper is no longer necessary as the
contents were moved to a function which is designed to use the old
aliases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the call to the validating function from the function which sets
stuff up.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the function to just prepare data for the disk. Callers need to
do the looping since there's more to do than just copy the data around.
The code path in qemuDomainPrepareDiskSource doesn't need to loop over
the chain yet, since there currently is no chain at this point. This
will be addressed later in the blockdev series where we will setup much
more stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainPrepareDiskSourceChain should set up the disk zero detection
mode only for the top level image. Since it's invoked also for the
middle of the chain we need to check that it's really only the top level
image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When restarting libvirt would previously lose the alias of the x509
certificate object. Upon unplug we would then not delete the
corresponding objects.
Restore the alias if we know it should be there.
Luckily for disks we don't support encrypted TLS environment, so there's
no need to regenerate the 'secret' alias for decryption.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt uses the stored alias to detach the TLS x509 object on disk
unplug. As the alias was not stored, the object would not be detached
if unplugging disks after libvirtd restart.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using 'haveTLS' to do this is pointless if the alias is not set.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we remember the alias we've used to attach the secret objects
we should reuse them rather than trying to infer them from the disk
configuration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously we did not store the aliases but rather re-generated them
when unplug was necessary. This is very cumbersome since the knowledge
when and which alias to use needs to be stored in the hotplug code as
well.
While this patch will not strictly improve this situation since there
still will be two places containing this code it at least will allow to
remove the mess from the disk-unplug code and will prevent introducing
more mess when adding blockdev support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than trying to figure out which alias was used, store it in the
status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to reference the secret objects by name when hot-unplugging
disks. Don't remove the alias so that it does not need to be
recalculated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's desired to keep the alias around to allow referencing of the secret
object used with qemu. Add set of APIs which will destroy all data
except the alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the logic that determines which secret shall be used into the
caller and make this function work only for plain secrets.
This untangles the control flow by only checking relevant data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The encryption secret is setup only for LUKS and thus requires the new
approach. Use qemuDomainSecretInfoNew for initializing it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some code paths can't use the unencrypted secret. Add a helper which
checks and sets up an encrypted secret only and reuse it when setting up
the secret to decrypt the TLS private key in qemuDomainSecretInfoTLSNew.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename it to qemuDomainSecretInfoNewPlain and annotate that it also may
set up a 'plain' secret in some cases. This will eventually be
refactored further.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function checks whether the storage source requires authentication
secret setup. Rename it accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuDomainSecretStorageSourcePrepare in
qemuDomainSecretHostdevPrepare as it uses a virStorageSource to prepare
the authentication secret object data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper checks that the vm has the master key setup and libvirt
supports the given encryption algorithm.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Alter qemuBuildVsockDevStr to allow passing a prefix for
the vhostfd file descriptor name. Domain startup uses
the numeric value of fd without a prefix, but hotplug
will need to use a prefix because passed file descriptor
names cannot start with a number.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Split out the device string building to allow reuse for hotplug.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
My commit b8b42ca added support for formatting the vsock
command line without actually checking if it's supported.
Add it to the per-device validation function.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This has been broken since commit v4.0.0-165-g93412bb827 which added
jobInfo->statsType enum to distinguish various statistics types. During
migration the type will always be QEMU_DOMAIN_JOB_STATS_TYPE_MIGRATION,
however the destination code consuming the statistics data from
migration cookie failed to properly set the type. So even though
everything was filled in, the type remained *_NONE and any attempt to
fetch the statistics data of a completed migration on the destination
host failed.
https://bugzilla.redhat.com/show_bug.cgi?id=1584071
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In commit 8bebb2b735 I've refactored how the detach of disk with a
managed persistent reservations object is handled. After the commit if
any disk with a managed PR object would be removed libvirt would also
attempt to remove the shared 'pr-manager-helper' object potentially used
by other disks.
Thankfully this should not have practical impact as qemu should reject
deletion of the object if it was still used and the rest of the code is
correct.
Fix this by removing the disk from the definition earlier and checking
if the shared/managed pr-manager-helper object is still needed.
This basically splits the detach code for the managed PR object from the
unmanaged ones. The same separation will follow for the attachment code
as well as it greatly simplifies -blockdev support for this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When preparing qemuCaps for test cases the following is
happening:
qemuTestParseCapabilitiesArch() is called, which calls
virQEMUCapsLoadCache() which in turn calls
virQEMUCapsInitHostCPUModel() which sets qemuCaps->kvmCPU and
qemuCaps->tcgCPU.
But then the code tries to update the capabilities:
testCompareXMLToArgv() calls testUpdateQEMUCaps() which calls
virQEMUCapsInitHostCPUModel() again overwriting previously
allocated memory. The solution is to free host cpuData in
testUpdateQEMUCaps().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We allocate a temporary bitmap but never free it.
Introduced by <commit 1f8a1a9>:
qemu: Do not use qemuMonitorSetMigrationCapability
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Create a new vsock endpoint by opening /dev/vhost-vsock,
set the requested CID via ioctl (or assign a free one if auto='yes'),
pass the file descriptor to QEMU and build the command line.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add a new 'vsock' element for the vsock device.
The 'model' attribute is optional.
A <source cid> subelement should be used to specify the guest cid,
or <source auto='yes'/> should be used.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When status XML was parsed the post-parse callbacks could not access
qemu caps and potentially upgrade the definition according to the
present caps. Implement the callback to pass it in.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Trying to set any cache for <disk device='lun'/> makes no sense.
Such disk translates into -device scsi-block on the command line
and the device lacks any cache setting because it's merely a
middle man between qemu and real SCSI device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function creates a list of all (or migratable only) CPU features
supported by QEMU. It works by looking at the CPU model info returned by
query-cpu-model-expansion QMP command.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
When computing a baseline CPU for a specific hypervisor we have to make
sure to include only CPU features supported by the hypervisor. Otherwise
the computed CPU could not be used for starting a new domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This is required for virCPUBaseline to accept a list of guest CPU
definitions since they do not have arch set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
virConnectGetDomainCapabilities needs to lookup QEMU capabilities
matching a specified binary, architecture, virt type, and machine type
while using default values when any of the parameters are not provided
by the user. Let's extract the lookup code into
virQEMUCapsCacheLookupDefault to make it reusable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainDetachDeviceAlias API is designed so that it only
sends detach request to qemu. It's user's responsibility to wait
for DEVICE_DELETED event, not libvirt's. Add @async flag to
qemuDomainDetach*Device() functions so that caller can chose if
detach is semi-synchronous (old virDomainDetachDeviceFlags()) or
fully asynchronous (new virDomainDetachDeviceFlags()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fact that we are overwriting @ret multiple times makes it
difficult to see what is actually happening here. Follow our
traditional pattern where @ret is initialized to -1, and set to 0
only in case we know we succeeded.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Funny, we obtain driver caps at the beginning of the function,
but then for unknown reason access driver->caps directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are overwriting @ret a lot. It makes hard to see what is
actually going on. Use more gotos. Two functions are fixed here:
qemuDomainDetachShmemDevice() and qemuDomainDetachWatchdog().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On watchdog unplug, when qemu doesn't support DEVICE_DELETED event
(or couple of other reasons) we do two things:
1) release watchdog device address,
2) call qemuDomainRemoveWatchdog() which does 1) again.
This is potentially dangerous.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On shmem unplug, when qemu doesn't support DEVICE_DELETED event
(or couple of other reasons) we do two things:
1) release shmem device address,
2) call qemuDomainRemoveShmemDevice() which does 1) again.
This is potentially dangerous.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of releasing address only sometimes in
qemuDomainDetachChrDevice() let's release it whenever the device
is actually removed from the domain definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Report domaincaps <features><genid supported='yes'/> if the guest
config accepts <genid/> or <genid>$GUID</genid>.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1149445
If the domain requests usage of the genid functionality,
then add the QEMU '-device vmgenid' to the command line
providing either the supplied or generated GUID value.
Add tests for both a generated and supplied GUID value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Before we generate the command line for qemu, if the domain about to
be launched desires to utilize the VM Generation ID functionality, then
handle both the regenerating the GUID value for backup recovery (restore
operation) and the startup after snapshot as both require a new GUID to
be generated to allow the guest operating system to recognize the VM
is re-executing something that has already executed before.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Add the query of the device objects for the vmgenid device
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than a lot of checks use a switch statement. This optimizes the
code as if one device is matched the rest will certainly not match.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Later on, more stuff will be added so prevent the main function growing
out of control.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the text monitor was deleted this event can't be triggered.
Remove it and all the unnecessary code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop all conditional calls which have JSON variants, now that we
guarantee JSON monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu did not QAPIfy these and the design and name will most probably
change. The replacements will not be compatible. Drop the JSON stubs and
annotate that there won't be a replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are no callers for these. Remove them and the monitor
implementations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QMP version was added in qemu commit e4c8f004c55d9da3eae3e14 which
is included in v1.3.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QMP version was added in qemu commit ab49ab5c488237f3656689 which
is included in v1.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement the secure way to transport non-shared storage data across
migrations. The new approach uses blockdev-add to create the NBD client
so that the TLS secret object can be specified.
https://bugzilla.redhat.com/show_bug.cgi?id=1300772
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Separate the code relevant for this approach so that we can later add a
second implementation without making the function messy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Drop the mention of 'drive mirror' from the function names and mention
NBD. This will help when adding the 'blockdev mirror' migration code
which will allow using TLS.
Additionally fix some of the function comments to make more sense
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Allow saving various aspects necessary to do NBD migration via blockdev
by storing a 'virStorageSource' in the disk private data meant to store
the NBD target of migration. Along with this add code to parse and
format it into the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extract the NBD portion of the 'job' status XML element parser into a
separate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We will be adding source data to it so extract it to a separate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
These helpers add infrastructure which simplifies adding and rolling
back virStorageSources to a running qemu instance. Using of the helper
structure and separate functions allows for a much cleaner code in the
section dealing with the monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
drive-mirror allows only file targets. Introduce support for
blockdev-mirror that is able to copy to any BDS described by a node name
in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move formatting of the qemu command out of qemuMonitorJSONMakeCommandRaw
to qemuMonitorJSONMakeCommandInternal to allow greater reusability and
document the function better.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The capability also represents that 'blockdev-add' is functional. It's
necessary to detect it via presence of 'blockdev-del' since blockdev-add
did not have the unsupported 'x-blockdev-add' version previously and
thus would be marked as present even if we could not use it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The initiation of a synchronous block job in the NBD storage migration
code was placed after entering the monitor thus after the lock on the VM
object was unlocked. Thankfully nothing bad could happen in this
situation since the migration job prevents any disk detaches or other
modifications of the domain object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reference the storage via node name rather than inlining it. This is
the approach that will be used with -blockdev/blockdev-add since it
allows more control and is more future proof.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce support for codec type 'output' ('hda-output' in QEMU) for ich6
and ich9 sound devices, which only advertises a line-out in the guest.
This has been available in QEMU since 0.14.
Signed-off-by: Filip Alac <filipalac@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This way we don't rely on QEMU supplying the -sandbox option
without CONFIG_SECCOMP.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 766d5c1b deprecated the capability, because we were assuming
it for every QEMU binary. At the time of the introduction, there
was no way to probe for this via QMP.
However since QEMU 1.5.0 (which is the earliest version we support)
we can rely on the query-command-line-options command to detect this
feature.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1534418
Just like ec982f6d92 denies hugepages for non-existent
guest NUMA nodes in case there are some nodes configured.
Unfortunately, when there are none, qemuBuildNumaArgStr() is not
called and thus we have to have check in qemuBuildMemPathStr()
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We currently print the libvirt and qemu version strings into the
per-guest logfile. It would be useful to know what kernel is running
too, so add that.
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The last caller not passing a comma was removed by:
commit ad8a7c4f85
Author: Ján Tomko <jtomko@redhat.com>
CommitDate: 2018-04-12 17:17:16 +0200
qemu: deprecate QEMU_CAPS_NETDEV
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The JSON property generator should not escape commas as we do on the
command line. The JSON->commandline generator already does that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'S' modifier for create the field optionally rather than calling
another JSON formatter function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
According to virDomainScreenshot() documentation, screens are
numbered sequentially. e.g. having two graphics cards, both with
four heads, screen ID 5 addresses the second head on the second
card.
But apart from that, there's nothing special happening here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As of v2.12.0-rc0~32^2 QEMU is capable specifying which display
device and head should the screendump be taken from. Track this
capability so that we can use it later in our virDomainScreenshot
API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit [1] dropped support for synchronous block job cancel.
This patch erases remnants from comments.
[1] commit 2350d101 "qemu: Remove support for legacy block jobs"
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Libvirt only manages one PR daemon. This means that we don't need to
pass the 'disk' object and also rename the functions dealing with this
so that it's obvious we only deal with the managed PR daemon.
Signed-off-by: Peter Krempa <pkrempa@redhat st.com>
Rather than always checking which path to use pre-assign it when
preparing storage source.
This reduces the need to pass 'vm' around too much. For later use the
path can be retrieved from the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To allow storing status information in the XML move the validation that
the 'path' is not valid for managed PR daemon case into
qemuDomainValidateStorageSource and allow parsing of the data even in
case when managed='yes'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Disk source definition should be validated in
qemuDomainValidateStorageSource rather than in individual generators of
command line arguments.
Change to the XML2XML test is required since now the definition is
actually validated at define time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For use with blockdev the PR manager will be bound to a virStorageSource
rather than a virDomainDiskDef, so we will need to use the correct
alias.
Allow passing a string rather than the whole disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Support OpenGL when using SDL backend via -sdl,gl=on. Add associated
tests.
NB: Usage of DO_TEST_CAPS_LATEST in qemuxml2argv doesn't work in
this case because -sdl gl is not introspectable.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Support OpenGL acceleration capability when using SDL graphics.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Create a function called `qemuBuildGraphicsSDLCommandLine` which is
called from qemuBuildGraphicsCommandLine.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Generates the QEMU command line for the vfio-ccw device.
Adds various functionality testing for vfio-ccw in libvirt:
1. Generation of QEMU command line from domain xml file
2. Generation of dump xml from domain xml file
3. Checks duplicate/invalid addresses for vfio-ccw devices.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduces the vfio-ccw model for mediated devices and prime vfio-ccw
devices such that CCW address will be generated.
Alters the qemuxml2xmltest for testing a basic mdev device using vfio-ccw.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add the function virHostdevIsMdevDevice() which detects whether a
hostdev is a mediated device or not. Also, replace all existing
conditionals.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let us introduce the capability vfio-ccw for supporting the basic
channel I/O passthrough, which have been introduced in QEMU 2.10. The
current focus is to support dasd-eckd (cu_type/dev_type = 0x3990/0x3390)
as the target device.
Let us also introduce the capability QEMU_CAPS_CCW_CSSID_UNRESTRICTED
for virtual-css-bridge. This capability is based on the
cssid-unrestricted property which exists if QEMU no longer enforces
cssid restrictions based on ccw device types.
Vfio-ccw capability is dependent on the hidden virtual-css-bridge, so
that we are able to probe for the cssid-unrestriced property to make
sure the devices are visible to non-mcss-e enabled guests.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let us introduce the capability QEMU_CAPS_CCW for virtual-css-bridge
and replace QEMU_CAPS_VIRTIO_CCW with QEMU_CAPS_CCW in code segments
which identify support for ccw devices.
The virtual-css-bridge is part of the ccw support introduced in QEMU 2.7.
The QEMU_CAPS_CCW capability is based on the existence of the QEMU type.
Let us also add the capability QEMU_CAPS_CCW to the tests which
require support for ccw devices.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1480668
QEMU has this new feature memory-backend-file.discard-data=yes
which is a nifty optimization. Basically, when qemu is quitting
or on memory hotplug it calls munmap() and close() on the file
that is backing the memory. However, this does not mean kernel
won't stop touching that part of memory. It still might. With
this feature enabled we tell kernel: "we don't need this memory
nor data stored in it". This makes kernel drop the memory
immediately without trying to sync memory with the mapped file.
Unfortunately, this cannot be turned on by default because we
can't be sure when users really don't care about what happens to
data after qemu dies. So it has to be opt-in. As usual, there are
three places where one can configure memory attributes. This
patch adds the feature to all of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks if memory-backend-file has discard-data
attribute or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks if qemu has "qom-list-properties" monitor
command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we've gotten rid of misleading names we can introduce
qemuMonitorGetObjectProps() function which queries -object
properties. Again, some parts of code can be reused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code that processes list of device properties is going to be
reused. Therefore put it into a separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we are the last one to use pr-manager object we need to remove
it and also kill the qemu-pr-helper process.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When attaching a disk that requires pr-manager we might need to
plug the pr-manager object and start the pr-helper process.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Before we exec() qemu we have to spawn pr-helper processes for
all managed reservations (well, technically there can only one).
The only caveat there is that we should place the process into
the same namespace and cgroup as qemu (so that it shares the same
view of the system). But we can do that only after we've forked.
That means calling the setup function between fork() and exec().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Just like we allow users overriding path to bridge-helper
detected at compile time we can allow them to override path to
qemu-pr-helper.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Just like in previous commit, qemu-pr-helper might want to open
/dev/mapper/control under certain circumstances. Therefore we
have to allow it in cgroups.
The change virdevmapper.c might look spurious but it isn't. After
6dd84f6850 any path that we're allowing in deivces CGroup is
subject to virDevMapperGetTargets() inspection. And libdevmapper
returns ENXIO for the path from subject.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If qemu-pr-helper is compiled with multipath support the first
thing it does is open /dev/mapper/control. Since we're going
to be running it inside qemu namespace we need to create it
there. Unfortunately, we don't know if it was compiled with or
without multipath so we have to create it anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For command line we need two things:
1) -object pr-manager-helper,id=$alias,path=$socketPath
2) -drive file.pr-manager=$alias
In -object pr-manager-helper we tell qemu which socket to connect
to, then in -drive file-pr-manager we just reference the object
the drive in question should use.
For managed PR helper the alias is always "pr-helper0" and socket
path "${vm->priv->libDir}/pr-helper0.sock".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The capability tracks if qemu has pr-manager-helper object. At
this time don't actually detect if qemu has the capability. Not
just yet. Only after the code is written the feature will be
enabled.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Couple of reasons for that:
a) there's no monitor command to change path where the pr-helper
connects to, or
b) there's no monitor command to introduce a new pr-helper for a
disk that already exists.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than have virJSONValueArraySize return a -1 when the input
is not an array and then splat an error message, let's check for
an array before calling and then change the return to be a size_t
instead of ssize_t.
That means using the helper virJSONValueIsArray as well as using a
more generic error message such as "Malformed <something> array".
In some cases we can remove stack variables and when we cannot,
those variables should be size_t not ssize_t. Alter a few references
of if (!value) to be if (value == 0) instead as well.
Some callers can already assume an array is being worked on based
on the previous call, so there's less to do.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The pointer to the qemu driver is already included in domain object's
private data, so does not need to be passed as yet another parameter
when the domain object is already passed.
Also removes parameter 'driver' from functions which had it just because of
qemuBlockJobUpdate.
Signed-off-by: Roland Schulz <schullzroll@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use the new helper when checking that the VM needs to be tainted as a
host-cdrom passthrough.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
The function will be reused in the test code where we don't care much
that the gluster debug level can't be populated from the qemu config.
Set the level only when 'cfg' is passed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When using blockdev-add and friends, libvirt will need to create also
properties for the qcow2/raw/... format handler in qemu. This patch adds
the infrastructure and implements all formats known to libvirt including
all properties which are expressed at the format level in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Enabling discard for the storage node allows the format drivers to
discard snapshots and other things, while configuration of the format
layer actually decides whether to actually discard data on request from
the host.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This will be required when doing blockdev-add to conform with the
approach qemu choses to create the disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When used directly with blockdev-add/-blockdev the cache mode will need
to be specified directly for every image rather than just for the disk
itself. This implements the backing options 'direct' and 'no-flush'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemu declares node-name as a 32 byte buffer and silently truncates
anything longer than that. This is unacceptable for libvirt, so we need
to make sure that we won't ever supply a node-name exceeding 31 chars.
Add a function which will do the validation and use it to validate
storage-protocol node names.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The gluster protocol in qemu uses two styles, one of which is legacy and
not covered by the QAPI schema.
To allow using of the new style in the blockdev-add code, add a
parameter for qemuBlockStorageSourceGetBackendProps which will switch
between the two modes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Block storage should actually be passed to qemu via 'host_device' or
'host_cdrom' according to the device type. There were no users of this
behaviour so we thankfully can change it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use virFileIsCDROM to detect whether a block device is a cdrom drive and
store it in virStorageSource. This will be necessary to correctly create
the 'host_cdrom' backend in qemu when using -blockdev.
We assume that host_cdrom makes only sense when used directly as a raw
image, but if a backing chain would be put in front of it, libvirt will
use 'host_device' in that case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Handle VIR_STORAGE_TYPE_DIR in qemuBlockStorageSourceGetBackendProps so
that a 'vvfat' driver is used, which emulates a FAT filesystem
containing the folders.
qemu requires us to add it as a storage layer, since a 'raw' layer is
usually put on top of it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move it to the validation callback and make it more robust. This will
also put the checks in the correct place to use with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a flag denoting that a virStorageSource is going to be used as a
floppy image. This will be useful in cases where the user passes in
files which shall be exposed as an image to the guest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
'file' backend in qemu supports few more options than the current
implementation. Extract it so that changes don't pollute the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some properties don't make sense to be configured for every single layer
of the backing chain, but to avoid needing to pass the disk structure we
will copy them to the individual virStorageSource.
Zero detection is applied only for the top layer image, while caching
and iomode for all layers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Save and restore node names if we know them or when we will be
generating them in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Everything besides the top of the chain is readonly. Track this when
parsing the XML and detecting the chain from the disk. Also fix the
state when taking snapshots.
All other cases where the top image is changed already preserve the
readonly state from the original image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability is unused since we stopped parsing -help output.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The -no-kvm-pit-reinjection option has been deprecated since
its introduction in QEMU 1.3. See commit <1569fa1>.
Drop the capability since all the QEMUs we support allow tuning
the kvm-pit properties via -global.
Also add the QEMU_CAPS_KVM_PIT_TICK_POLICY to the clock-catchup
tests, since expecting it to succeed with QEMU that does not
have kvm-pit makes no sense.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since we started assuming QEMU_CAPS_MACHINE_OPT in
commit <69420756>, this function can only be reached
for unsupported virt types.
Replace the call with a virReportError.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When adding a new object to the domain object list, there should
have been 2 virObjectRef calls made one for each list into which
the object was placed to match the 2 virObjectUnref calls that
would occur during Remove as part of virHashRemoveEntry when
virObjectFreeHashData is called when the element is removed from
the hash table as set up in virDomainObjListNew.
Some drivers (libxl, lxc, qemu, and vz) handled this inconsistency
by calling virObjectRef upon successful return from virDomainObjListAdd
in order to use virDomainObjEndAPI when done with the returned @vm.
While others (bhyve, openvz, test, and vmware) handled this via only
calling virObjectUnlock upon successful return from virDomainObjListAdd.
This patch will "unify" the approach to use virDomainObjEndAPI
for any @vm successfully returned from virDomainObjListAdd.
Because list removal is so tightly coupled with list addition,
this patch fixes the list removal algorithm to return the object
as entered - "locked and reffed". This way, the callers can then
decide how to uniformly handle add/remove success and failure.
This removes the onus on the caller to "specially handle" the
@vm during removal processing.
The Add/Remove logic allows for some logic simplification such
as in libxl where we can Remove the @vm directly rather than
needing to set a @remove_dom boolean and removing after the
libxlDomainObjEndJob completes as the @vm is locked/reffed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The vm name is not needed for any functional requirement, but it will be
useful when debugging problems to identify which VM is associated with a
filter, since UUID is not human friendly.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Alter qemuBuildTPMDevStr to format the tpm-crb on the command line
and use the enum range checking for valid model.
Add a test case for the formation of the tpm-crb QEMU device
command line. The qemuxml2argvtest changes cannot use the newer
DO_TEST_CAPS_LATEST since building of the command line involves
calling qemuBuildTPMBackendStr which attempts to open the
path to the device (e.g. /dev/tmp0).
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
QEMU on x86_64 (since v2.12) can support tpm-crb devices.
Introduce qemu capabilities for this device.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The 'domrename' command needs to check if the new domain name contains
the slash character. This character is not accepted by libvirt XML
definition because it is an invalid char (see Cole's commit b1fc6a7b7).
This commit enhace the 'domrename' command adding this check.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1333232
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The virStorageFileSupportsSecurityDriver and
virStorageFileSupportsAccess currently just return a boolean
value. This is ok because they don't have any failure scenarios
but a subsequent patch is going to introduce potential failure
scenario. This changes their return type from a boolean to an
int with values -1, 0, 1.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virStorageFileGetBackingStoreStr method has overloaded the NULL
return value to indicate both no backing available and a fatal
error dealing with it.
The caller is thus not able to correctly propagate the error
messages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the TLS env for migration when starting the NBD server if TLS is
enabled for migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To allow encryption of the non-shared storage migration NBD connection
we will need to instantiated the NBD server with the TLS env.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The NBD server in qemu supports TLS transport. Detect this capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When a VM is destroyed while being migrated (waiting in
qemuMigrationSrcWaitForCompletion) the private object cleanup code frees
the 'current' job info. Since the migration code attempts to setup
various aspects of the current job even on failure this results into a
crash.
Job data is cleared in qemuDomainObjPrivateDataClear since commit
888aa4b6b9
Fix this by skipping all of the code which requires the qemu process to
be alive if the VM is not active any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Since libvirt is currently not able to setup the NBD migration stream
secured by TLS we should not allow such migration since data would be
transferred unencrypted.
This will break compatibility of TLS migration if non-shared storage is
requested but the security implications are more severe.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The code setting TLS parameters verifies that TLS is supported by
looking at the dump of parameters which will be reset after migration,
but sets the parameters in the list of new parameters. As
qemuMigrationParamsSetString did not set the 'set' property, the TLS
parameters would not be used.
This is a regression after the series refactoring migration parameters
and it resulted into TLS not being used even when requested.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Introduce a perl script that is able to regroup both
the QEMU_CAPS constants and the capability strings.
Check correct grouping as a part of syntax check.
For in-place regrouping after a rebase, just run:
tests/group-qemu-caps.pl
without any parameters.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The attribute can be used to disable ROM loading completely
for a device.
This might be needed because, even when the guest is configured
such that the PCI ROM will not be loaded in the PCI BAR, some
hypervisors (eg. QEMU) might still make it available to the
guest in a form (eg. fw_cfg) that some firmwares (eg. SeaBIOS)
will consume, thus not achieving the desired result.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1425058
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Rework the code such that virDomainObjListFindByID will always
return a locked/ref counted object so that the callers can
always do the same cleanup logic to call virDomainObjEndAPI.
Makes accessing the objects much more consistent.
NB:
There were 2 callers (lxcDomainLookupByID and qemuDomainLookupByID)
that were already using the ByID name, but not virDomainObjEndAPI -
these were changed as well in this update/patch.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Now that every caller is using virDomainObjListFindByUUIDRef,
let's just remove it and keep the name as virDomainObjListFindByUUID.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
If virJSONValueArraySize(caps) <= 0, then we will still need to
virJSONValueFree(caps) because qemuMonitorSetMigrationCapabilities
won't consume it.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
The code is generic enough to be reused. Move it into a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far all the properties we are trying to fetch are device
properties, i.e. -device $dev on qemu command line. Change
misleading variable names to express what's queried for better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current private XML parsing code relies on the assumption
that NUMA node IDs start from 0 and are densely allocated,
neither of which is necessarily the case.
Change it so that the bitmap size is dynamically calculated by
looking at NUMA node IDs instead, which ensures all nodes will
be able to fit and thus the bitmap will be parsed successfully.
Update one of the test cases so that it would fail with the
previous approach, but passes with the new one.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1490158
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allocated in qemuMigrationParamsNew() we need to free
priv->job.migParams when no longer needed.
==8061== 234 (192 direct, 42 indirect) bytes in 1 blocks are definitely lost in loss record 112 of 123
==8061== at 0x4C2CF26: calloc (vg_replace_malloc.c:711)
==8061== by 0x5325D05: virAlloc (viralloc.c:144)
==8061== by 0x1984F9: qemuMigrationParamsNew (qemu_migration_params.c:218)
==8061== by 0x19A352: qemuMigrationParamsParse (qemu_migration_params.c:1185)
==8061== by 0x1604D8: qemuDomainObjPrivateXMLParseJob (qemu_domain.c:2390)
==8061== by 0x160AE9: qemuDomainObjPrivateXMLParse (qemu_domain.c:2517)
==8061== by 0x5419EAE: virDomainObjParseXML (domain_conf.c:20442)
==8061== by 0x541A25E: virDomainObjParseNode (domain_conf.c:20555)
==8061== by 0x541A2FC: virDomainObjParseFile (domain_conf.c:20574)
==8061== by 0x13607D: testCompareStatusXMLToXMLFiles (qemuxml2xmltest.c:75)
==8061== by 0x14F3E8: virTestRun (testutils.c:180)
==8061== by 0x14DCD0: mymain (qemuxml2xmltest.c:1200)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The disk cache mode translates to various frontend and backend
attributes for the qemu block layer. For the frontend device the
'writeback' parameter is used and provided as 'write-cache'. Implement
this so that we can later switch to using -blockdev where we will not
pass the cachemode directly any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU translates the cache mode of a disk internally into 3 flags.
'write-cache' is a flag of the frontend while others are flag of the
backing storage. Add capability which will allow expressing it via the
frontend attribute.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add helper which will map values of disk cache mode to the flags which
are accepted by various parts of the qemu block layer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When qemu does not support changing of the backing store string, we'd
reaport that block pull is not supported instead of block commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Replace direct usage of disk->src->driverName with the existing
accessors. The parser code where we assign the driver from XML is
intentionally not fixed to save an allocation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
There were two places where we'd check this independently. Move it to
the disk definition validation callback. This also fixes possible use of
NULL in a printf for network storage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
On Core i5 650 x86_64 kvm guest fail to start with error [1] for next cpu config:
<cpu mode='host-model' check='partial'>
<model fallback='allow'/>
<feature policy='require' name='x2apic'/>
</cpu>
The problem is in full CPU calculation in virQEMUCapsInitHostCPUModel.
It is supposed to include features emulated by qemu and missed on host. Some of
such features may be not included however.
For Core i5 650 host CPU is detected as Westmere and reported CPU as
SandyBridge. x2apic is missed on host and provided by installed qemu. The
feature is not mentioned in reported CPU features explicitly because SandyBridge
model include it. As a result full CPU does not include x2apic too.
Solution is to expand guest cpu features before updating fullCPU features.
[1] error: the CPU is incompatible with host CPU: \
Host CPU does not provide required features: x2apic
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
So far we are repeating the following lines over and over:
if (!(virSomeObjectClass = virClassNew(virClassForObject(),
"virSomeObject",
sizeof(virSomeObject),
virSomeObjectDispose)))
return -1;
While this works, it is impossible to do some checking. Firstly,
the class name (the 2nd argument) doesn't match the name in the
code in all cases (the 3rd argument). Secondly, the current style
is needlessly verbose. This commit turns example into following:
if (!(VIR_CLASS_NEW(virSomeObject,
virClassForObject)))
return -1;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Whenever we declare a new object the first member of the struct
has to be virObject (or any other member of that family). Now, up
until now we did not care about the name of the struct member.
But lets unify it so that we can do some checks at compile time
later.
The unified name is 'parent'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add comma escaping for loader->path and loader->nvram.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for disk->vendor and disk->product when being
built for the command line (and not from hotplug).
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In order to not affect running VMs, refreshing the halted state
is only performed if QEMU supports the query-cpus-fast QAPI.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extract architecture specific data from query-cpus[-fast] if
available. A new function qemuMonitorJSONExtractCPUArchInfo()
can then call architecture-specific extraction handlers.
Initially, there's a handler for s390 cpu info to
set the halted property depending on the s390 cpu state
returned by QEMU. With this it's still possible to report
the halted condition even when using query-cpus-fast.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use query-cpus-fast instead of query-cpus if supported by QEMU.
Based on the QEMU_CAPS_QUERY_CPUS_FAST capability.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Detect whether QEMU supports the QMP query-cpus-fast API
and set QEMU_CAPS_QUERY_CPUS_FAST in this case.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
If QEMU uses a seccomp blacklist (since 2.11), -sandbox on
no longer tries to whitelist all the calls, but uses sets
of blacklists:
default (always blacklisted with -sandbox on)
obsolete (defaults to deny)
elevateprivileges (setuid & co, default: allow)
spawn (fork & execve, default: allow)
resourcecontrol (setaffinity, setscheduler, default: allow)
If these are supported, default to sandbox with all four
categories blacklisted.
https://bugzilla.redhat.com/show_bug.cgi?id=1492597
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU commit 1bd6152 changed the default behavior from whitelist
to blacklist and introduced a few sets of system calls.
Use the 'elevateprivileges' parameter of -sandbox as a witness
of this change.
https://bugzilla.redhat.com/show_bug.cgi?id=1492597
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Exit early if possible to simplify the logic.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move the building of -sandbox command line into a separate function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Implied by QEMU >= 1.2.0.
Delete the negative test cases now that they always pass.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Implied by QEMU >= 1.2.0.
Also delete the now redundant disk-drive-copy-on-read test.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This function is indeed getting -device properties and not
-object properties. The current name is misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Trying to delete the non-existent TLS objects results in ugly error
messages in the log, which could easily confuse users. Let's avoid this
confusion by not trying to delete the objects if we were not asked to
enable TLS migration and thus we didn't created the objects anyway.
This patch restores the behavior to the state before "qemu: Reset all
migration parameters".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This will help us decide what to do when libvirtd is restarted while an
async job is running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the flags passed to the API which started the migration. Let's
use them instead of a separate bool to check if post-copy migration was
requested.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the flags passed to the API which started QEMU_ASYNC_JOB_DUMP
and we can use them to check whether a memory-only dump is running.
There's no need for a specific bool flag.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
migrate_cancel QMP command cannot be used for cancelling memory-only
dumps and priv->job.dump_memory_only is used for reporting an error if
someone calls virDomainAbortJob when memory-only dump job is running.
Since commit 150930e309 the dump_memory_only flag is set only if
dump-guest-memory command was called without the detach parameter. This
would incorrectly allow libvirt to send migrate_cancel while the
detached memory-only dump is running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When an async job is running, we sometimes need to know how it was
started to distinguish between several types of the job, e.g., post-copy
vs. normal migration. So far we added a specific bool item to
qemuDomainJobObj for such cases, which doesn't scale very well and
storing such bools in status XML would be painful so we didn't do it.
A better approach is to store the flags passed to the API which started
the async job, which can be easily stored in status XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To be able to restore all migration parameters when libvirtd is
restarting during an active migration job, we need to store the original
values of all parameters (stored in priv->job.migParams) in the status
XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most QEMU migration parameters directly correspond to
VIR_MIGRATE_PARAM_* typed parameters and qemuMigrationParamsFromFlags
can automatically set them according to a static mapping between libvirt
and QEMU parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The API is renamed as qemuMigrationParamsGetULL and it can be used with
any migration parameter stored as unsigned long long.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When an always-on migration capability is supposed to be enabled on both
sides of migration, each side can only enable the feature if it is
enabled by the other side.
Thus the source host sends a list of supported migration capabilities in
the migration cookie generated in the Begin phase. The destination host
consumes the list in the Prepare phase and decides what capabilities can
be enabled when starting a QEMU process for incoming migration. Once
done the destination sends the list of supported capabilities back to
the source where it is used during the Perform phase to determine what
capabilities can be automatically enabled.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some migration capabilities may be enabled automatically, but only if
both sides of migration support them. Thus we need to be able transfer
the list of supported migration capabilities in migration cookie.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the monitor code no longer needs to see this enum, we move it
to the place where migration parameters are defined and drop the
"monitor" reference from the name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to have all migration capabilities parsing and formatting at one
place, i.e., in qemu_migration_params.c. The parsing is already there in
qemuMigrationCapsCheck.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adding support for new migration parameter requires a lot of places to
be changed (most likely by copy&paste engineering): new variables to
store the parameter value and the associated *_set bool, JSON formatter
and parser, XML formatter and parser (to be added soon), and the actual
code to set the parameter. It's pretty easy to forget about some of the
places which need to be updated and end up with incorrect support. The
goal of this patch is to let most of the places do their job without any
modifications when new parameters are added.
To achieve the goal, a new qemuMigrationParam enum is introduced and all
parameters are stored in an array indexed by the items of this enum.
This will also allow us to automatically set the migration parameters
which directly correspond to libvirt's typed parameters accepted by
virDomainMigrate* APIs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's no longer used by the monitor code so we can hide it inside
qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to have all migration parameters parsing and formatting at one
place, i.e., in qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to have all migration parameters parsing and formatting at once
place, i.e., in qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use this internal structure only in qemu_migration_params.c and change
other non-test users to use the high level qemuMigrationParams struct.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's separate the code which queries QEMU for migration parameters from
qemuMigrationParamsCheck into a dedicated function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By merging qemuMigrationAnyCompressionParse into
qemuMigrationParamsSetCompression we can drop the useless intermediate
qemuMigrationCompression structure and parse compression related typed
parameters and flags directly into qemuMigrationParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since every parameter or capability set in qemuMigrationCompression
structure is now reflected in qemuMigrationParams structure, we can
replace qemuMigrationAnyCompressionDump with a new API which will work
on qemuMigrationParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to call this API explicitly in the migration code. We
can pass the compression parameters to qemuMigrationParamsFromFlags and
it can internally call qemuMigrationParamsSetCompression to apply them
to the qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The API will soon be called from qemuMigrationParamsFromFlags. Let's
move it to avoid the need to add a forward declaration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's become only a tiny wrapper around virBitmapSetBit, which can easily
be called directly. We don't need to call virBitmapClearBit since
migParams->caps bitmap is initialized with zeros.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far it's used only for CPU throttling parameters which are all ints,
but we'll soon want to use it for more parameters with different types.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Propagate the calls up the stack to the point where
qemuMigrationParamsFromFlags is called. The end goal achieved in the
following few patches is to merge compression parameters into the
general migration parameters code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most migration capabilities are directly connected with
virDomainMigrateFlags so qemuMigrationParamsFromFlags can automatically
enable them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some migration capabilities are always enabled if QEMU supports them. We
can just drop the explicit code for them and let
qemuMigrationParamsCheck automatically set such capabilities.
QEMU_MONITOR_MIGRATION_CAPS_EVENTS would normally be one of the always
on features, but it is the only feature we want to enable even for other
jobs which internally use migration (such as save and snapshot). Hence
this capability is set very early after libvirtd connects to QEMU
monitor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's just a tiny wrapper around qemuMigrationParamsSetCapability and
setting priv->job.postcopyEnabled is not something qemuMigrationParams
code should be doing anyway so let the callers do it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every migration entry point in qemu_driver is supposed to call
qemuMigrationParamsFromFlags to transform flags and parameters into
qemuMigrationParams structure and pass the result to qemuMigration*
APIs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some migration parameters and capabilities are supposed to be set on
both sides of migration while others should only be set on one side. For
example, CPU throttling parameters make no sense on the destination and
they can be used even if the destination is too old to support them.
To make qemuMigrationParamsFromFlags more general and usable on both
sides of migration, we need to tell it what side it's been called on.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of checking each capability at the time we want to set it in
qemuMigrationParamsSetCapability we can check all of them at once in
qemuMigrationParamsCheck.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We reached the point when qemuMigrationParamsApply is the only API which
sends migration parameters and capabilities to QEMU. Thus all but the
TLS parameters can be set before we ask QEMU for the current values of
all parameters in qemuMigrationParamsCheck.
Supported migration capabilities are queried as soon as libvirt connects
to QEMU monitor so we can check them anytime.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We reached the point when qemuMigrationParamsApply is the only API which
sends migration parameters and capabilities to QEMU. Thus all but the
TLS parameters can be set before we ask QEMU for the current values of
all parameters in qemuMigrationParamsCheck.
Supported migration capabilities are queried as soon as libvirt connects
to QEMU monitor so we can check them anytime.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prefer xbzrle-cache-size migration parameter over the special
migrate-set-cache-size QMP command.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally QEMU provided query-migrate-cache-size and
migrate-set-cache-size QMP commands for querying/setting XBZRLE cache
size. In version 2.11 QEMU added support for XBZRLE cache size to the
general migration paramaters commands.
This patch adds support for this parameter to libvirt to make sure it is
properly restored to its original value after a failed or aborted
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rework all remaining callers of qemuMonitorSetMigrationCapability to use
the new qemuMonitorSetMigrationCapabilities API.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Migration capabilities are closely related to migration parameters and
it makes sense to keep them in a single data structure. Similarly to
migration parameters the capabilities are all send to QEMU at once in
qemuMigrationParamsApply, all other APIs operate on the
qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our current monitor API forces the caller to call
migrate-set-capabilities QMP command for each capability separately,
which is quite suboptimal. Let's add a new API for setting all
capabilities at once.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All users of migration parameters are supposed to use APIs provided by
qemu_migration_params.c without having to worry about the internals.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new name is qemuMigrationParamsApply and it will soon become the
only API which will send all requested migration parameters and
capabilities to QEMU. All other qemuMigrationParams* APIs will just
operate on the qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no real reason for qemuMigrationParamsEnableTLS to require the
callers to pass a valid virQEMUDriverConfigPtr, it can just call
virQEMUDriverGetConfig.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function checks whether QEMU supports TLS migration and stores the
original value of tls-creds parameter to priv->migTLSAlias. This is no
longer needed because we already have the original value stored in
priv->migParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code can be merged directly in qemuMigrationParamsAddTLSObjects.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Restore the original values of all migration parameters we store in
qemuDomainJobObj instead of explicitly resting only a limited set of
them.
The result is not strictly equivalent to the previous code wrt reseting
TLS state because the previous code would only reset it if we changed it
before while the new code will reset it always if QEMU supports TLS
migration. This is not a problem for the parameters themselves, but it
can cause spurious errors about missing TLS objects being logged at the
end of non-TLS migration. This issue will be fixed ~50 patches later.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, only job->phase is passed and both APIs will need to look at
more details about the job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Any job which touches migration parameters will first store their
original values (i.e., QEMU defaults) to qemuDomainJobObj to make it
easier to reset them back once the job finishes.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When connection to the client which controls a non-p2p migration gets
closed between Perform and Confirm phase, we don't know whether the
domain was successfully migrated or not. Thus, we have to leave the
domain paused and just cleanup the migration job and reset migration
parameters.
Previously we didn't reset the parameters and future save or snapshot
operations would see wrong environment (and could fail because of it) in
case the domain stayed running on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently migration parameters are stored in a structure which mimics
the QEMU migration parameters handled by query-migrate-parameters and
migrate-set-parameters. The new structure will become a libvirt's
abstraction on top of QEMU migration parameters, capabilities, and
related stuff.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It provides just another view on some migration parameters so let's move
it close to them. The end goal is to merge compression parameters with
the rest of migration parameters since it doesn't make any sense to
handle them differently.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's no longer used since we do not store the struct on a stack anymore.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It will get a bit more complicated soon and storing it on a stack with
{0} initializer will no longer work. We need a proper constructor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our *Free functions usually do not take a double pointer and the caller
has to make sure it doesn't use the stale pointer after the *Free
function returns.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is connected with the code which handles migration
parameters and capabilities, let's move it to qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the function is tightly connected to migration, it was renamed as
qemuMigrationCapsCheck and moved to qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the end, this will allow us to have most of the logic around
migration parameters and capabilities done in one place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is now called qemuMigrationParamsFromFlags to better
reflect what it is doing: taking migration flags and params and
producing a struct with QEMU migration parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in d3db304d2e. Instead of returning immediately we
need to jump onto cleanup label where @paths is freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
