Commit Graph

442 Commits

Author SHA1 Message Date
Cole Robinson
ce452877cb configure: Report --with-loader-nvram value in summary 2015-04-22 17:47:19 -04:00
Cole Robinson
714668b506 configure: Fix --loader-nvram typo 2015-04-22 14:19:43 -04:00
Martin Kletzander
5336a3a47c configure: Align messages
The first two were a bit off.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-04-15 13:33:35 +02:00
Peter Krempa
84a84bd59f Bump version to 1.2.15 for new dev cycle 2015-04-02 10:10:21 +02:00
Jim Fehlig
2adba7d3ab libxl: use xenlight pkgconfig file if present
xen.git commit babeca32 added a pkgconfig file for libxenlight,
allowing libxl apps to determine the location of Xen binaries
such as firmware blobs, device emulator, etc.

This patch adds support for xenlight.pc in the libxl driver, falling
back to the previous configure logic if not found.  It introduces
LIBXL_FIRMWARE_DIR and LIBXL_EXECBIN_DIR to define the firmware and
libexec_bin locations.  If xenlight.pc does not exist, the defines
are set to the current hardcoded paths.  The capabilities'
<emulator> and <loader> elements are updated to use the paths.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-03-19 16:13:26 -06:00
Antoni Segura Puimedon
e1f6485694 util: functions to support binding/unbinding midonet virtualports
Adds the port type definitions and methods that will be used to bind
interfaces to the Midonet virtual ports.

virtnetdevmidonet.c adds the way to bind and unbind the ports by
calling into the Midonet Host Agent control command line (installed
with the midolman package).

Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
2015-03-17 12:56:37 -04:00
Pavel Hrdina
373973206a rpm-build: use pkg-config to detect wireshark presence
Wireshark supports pkg-config since 1.11.3.  Right now we build
wireshark-dissectior tool as default trough rpm build only on
fedora >= 21 and there is new wireshark that supports pkg-config.
If someone wants to build libvirt with wireshark-dissector against old
wireshark, they should specify the location by hand.

This patch is mainly to fix wrong dependency on wireshark binary as it
doesn't make sense to require that binary file to just get version info
of that package in makefile.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-03-16 22:58:54 +01:00
Pavel Hrdina
48461b169e virnetdev: fix build with old kernel
Commit c9027d8f added a detection of NIC HW features, but some of them
are not available in old kernel.  Very old kernels lack enum
ethtool_flags and even if this enum is present, not all values are
available for all kernels.  To be sure that we have everything in kernel
that we need, we must check for existence of most of that flags, because
only few of them were defined at first.

Also to successfully build libvirt with older kernel we need to include
<linux/types.h> before <linux/ethtool.h> to have __u32 and friends
defined.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-03-12 17:48:02 +01:00
Ján Tomko
0c1aa8d7a6 Post-release version bump for new dev cycle 2015-03-02 07:38:43 +01:00
Martin Kletzander
b6a2828e53 util: Add virProcessSetScheduler() function for scheduler settings
This function uses sched_setscheduler() function so it works with
processes and threads as well (even threads not created by us, which is
what we'll need in the future).

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-02-11 17:30:06 +01:00
Michal Privoznik
bc03a23149 qemu: Allow UEFI paths to be specified at compile time
Up until now there are just two ways how to specify UEFI paths to
libvirt. The first one is editing qemu.conf, the other is editing
qemu_conf.c and recompile which is not that fancy. So, new
configure option is introduced: --with-loader-nvram which takes a
list of pairs of UEFI firmware and NVRAM store. This way, the
compiled in defaults can be passed during compile time without
need to change the code itself.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-01-29 15:20:42 +01:00
Chen Hanxiao
466b29c8c3 storage: introduce btrfsCloneFile() for COW copy
Add a wrapper for BTRFS_IOC_CLONE ioctl.

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-01-27 13:24:10 +01:00
Peter Krempa
a17ca850ba Post-release version bump for new dev cycle 2015-01-27 09:28:15 +01:00
Jim Fehlig
4689cdf779 Introduce support for parsing/formatting Xen xl config format
Introduce a parser/formatter for the xl config format.  Since the
deprecation of xm/xend, the VM config file format has diverged as
new features are added to libxl.  This patch adds support for parsing
and formating the xl config format.  It supports the existing xm config
format, plus adds support for spice graphics and xl disk config syntax.

Disk config is specified a bit differently in xl as compared to xm.  In
xl, disk config consists of comma-separated positional parameters and
keyword/value pairs separated by commas. Positional parameters are
specified as follows

   target, format, vdev, access

Supported keys for key=value options are

  devtype, backendtype

The positional paramters can also be specified in key/value form.  For
example the following xl disk config are equivalent

    /dev/vg/guest-volume,,hda
    /dev/vg/guest-volume,raw,hda,rw
    format=raw, vdev=hda, access=rw, target=/dev/vg/guest-volume

See $xen_sources/docs/misc/xl-disk-configuration.txt for more details.

xl disk config is parsed with the help of xlu_disk_parse() from
libxlutil, libxl's utility library.  Although the library exists
in all Xen versions supported by the libxl virt driver, only
recently has the corresponding header file been included.  A check
for the header is done in configure.ac.  If not found, xlu_disk_parse()
is declared externally.

Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-01-14 08:28:50 -07:00
Jim Fehlig
f7a30375bd Revert "src/xenconfig: Xen-xl parser"
This reverts commit 2c78051a14.

Conflicts:
	src/Makefile.am

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-01-12 10:15:13 -07:00
Kiarie Kahurani
2c78051a14 src/xenconfig: Xen-xl parser
Introduce a Xen xl parser

This parser allows for users to convert the new xl disk format and
spice graphics config to libvirt xml format and vice versa. Regarding
the spice graphics config, the code is pretty much straight forward.
For the disk {formating, parsing}, this parser takes care of the new
xl format which include positional parameters and key/value parameters.
In xl format disk config a <diskspec> consists of parameters separated by
commas. If the parameters do not contain an '=' they are automatically
assigned to certain options following the order below

   target, format, vdev, access

The above are the only mandatory parameters in the <diskspec> but there
are many more disk config options. These options can be specified as
key=value pairs. This takes care of the rest of the options such as

  devtype, backend, backendtype, script, direct-io-safe,

The positional paramters can also be specified in key/value form
for example

    /dev/vg/guest-volume,,hda
    /dev/vg/guest-volume,raw,hda,rw
    format=raw, vdev=hda, access=rw, target=/dev/vg/guest-volume

are interpleted to one config.

In xm format, the above diskspec would be written as

phy:/dev/vg/guest-volume,hda,w

The disk parser is based on the same parser used successfully by
the Xen project for several years now.  Ian Jackson authored the
scanner, which is used by this commit with mimimal changes.  Only
the PREFIX option is changed, to produce function and file names
more consistent with libvirt's convention.

Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-01-03 22:41:07 -07:00
Martin Kletzander
791fc05acc Post-release version bump for new dev cycle
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-12-13 10:01:31 +01:00
Eric Blake
aca0ae1faa maint: use portable shell
Reported in https://bugzilla.redhat.com/show_bug.cgi?id=1165827;
dash complains:

checking for pkcheck... /usr/bin/pkcheck
checking whether pkcheck supports uid value... yes
./configure: 63906: test: xno: unexpected operator
checking for dtrace... no

* configure.ac: Use '=' not '==' in test.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-19 12:13:14 -07:00
John Ferlan
e43854a498 Post-release version bump for new dev cycle 2014-11-03 10:40:44 -05:00
Roman Bogorodskiy
00fa136d0b virnetdev: stub virNetDev{Add,Del}Multi on FreeBSD
Currently, build fails on FreeBSD because its struct ifreq does not
have ifr_hwaddr member. In order to fix that, check if this member
is present, otherwise fall back to the stub version of the
virNetDev{Add,Del}Multi functions.
2014-10-30 07:59:39 +03:00
Shanzhi Yu
9cf6dd00ce configure: improve misleading libnl3-devel missing error message
When building libvirt from source with netcf-devel installed, the
configure script reports error "libnl-devel >=3.0 is required for
macvtap support", while actually libnl3-devel is required.

Signed-off-by: Shanzhi Yu <shyu@redhat.com>
2014-10-03 16:08:44 +02:00
Guido Günther
adac88c347 Make editor used for 'virsh edit' configurable
Debian wants to use 'sensible-editor' instead of vi other distros might
want to use other defaults. This avoids distro specific patches.
2014-10-01 20:17:48 +02:00
Peter Krempa
5809fec90b Bump version to 1.2.10 for new dev cycle 2014-10-01 10:58:32 +02:00
Dmitry Guryanov
64018e0c83 parallels: build with parallels SDK
Executing prlctl command is not an optimal way to interact with
Parallels Cloud Server (PCS), it's better to use parallels SDK,
which is a remote API to paralles dispatcher service.

We prepared opensource version of this SDK and published it on
github, it's distributed under LGPL license. Here is a git repo:
https://github.com/Parallels/parallels-sdk.

To build with parallels SDK user should get compiler and linker
options from pkg-config 'parallels-sdk' file. So fix checks in
configure script and build with parallels SDK, if that pkg-config
file exists and add gcc options to makefile.

Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
2014-09-25 15:42:32 +02:00
Michal Privoznik
ed79ebdf7c Post-release version bump for new dev cycle
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-09-02 10:07:15 +02:00
Jim Fehlig
870c90c70f xen: rename xenxs to xenconfig
src/xenxs contains parsing/formating functions for the various xen
config formats, and is better named src/xenconfig.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2014-08-18 20:36:24 -06:00
Jincheng Miao
3f03398dbe build: force configure failed when perl is missing
Perl is necessary to our build processing, it will invoke a lot of
generating script, like: gendispatch.pl. If perl is missing, it's
ok for build from git checkout, because autogen.sh will tell you.
But for compiling from a release tarball, configure will just record
a missing message, and continue, then build failed, like:
https://www.redhat.com/archives/libvirt-users/2014-August/msg00050.html

So need to enhance configure script to handle this negative case.

Reported-by: Hongbin Lu <hongbin@savinetwork.ca>
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-08-14 11:28:18 +02:00
Roman Bogorodskiy
0257d06ba4 storage: ZFS support
Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.

Features supported:

 - pool-start, pool-stop
 - pool-info
 - vol-list
 - vol-create / vol-delete

Pool definition looks like that:

 <pool type='zfs'>
  <name>myzfspool</name>
  <source>
    <name>actualpoolname</name>
  </source>
 </pool>

The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.

User has to create a pool on his own, this driver doesn't
support pool creation currently.

A volume could be used with Qemu by adding an entry like this:

    <disk type='volume' device='disk'>
      <driver name='qemu' type='raw'/>
      <source pool='myzfspool' volume='vol5'/>
      <target dev='hdc' bus='ide'/>
    </disk>
2014-08-12 19:40:20 +04:00
Eric Blake
e3e1e52ace Post-release version bump for new dev cycle
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-08-04 07:33:37 -06:00
Michal Privoznik
28d54aab05 examples: Introduce domtop
There's this question on the list that is asked over and over again.
How do I get {cpu, memory, ...} usage in percentage? Or its modified
version: How do I plot nice graphs like virt-manager does?

It would be nice if we have an example to inspire people. And that's
what domtop should do. Yes, it could be written in different ways, but
I've chosen this one as I think it show explicitly what users need to
implement in order to imitate virt-manager's graphing.

Note: The usage is displayed from host perspective. That is, how much
host CPUs the domain is using. But it should be fairly simple to
switch do just guest CPU usage if needed.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-18 16:39:54 +02:00
Roman Bogorodskiy
61bbdbb94c Implement interface stats for BSD 2014-07-15 22:00:59 +04:00
Martin Kletzander
7a0e366f2b Post-release version bump for new dev cycle
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-02 08:17:23 +02:00
Daniel P. Berrange
60c343f688 Add pkg-config files to allow deps to build against source tree
When testing language bindings it is useful to be able to build
them against an uninstalled libvirt source tree. Add a dummy
set of pkg-config files to allow for this. This can be used by
setting

  export PKG_CONFIG_PATH=/path/to/libvirt/git/src

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-06-23 16:17:55 +01:00
Daniel P. Berrange
65d8c92a75 Add pkg-config files for libvirt-qemu & libvirt-lxc
For some reason there have never been pkg-config files created
for the libvirt-qemu.so and libvirt-lxc.so libraries.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-06-23 16:17:27 +01:00
Cédric Bosdonnat
b73aafd6dd Added example script on how to convert LXC container config 2014-06-17 22:08:13 -06:00
Daniel Veillard
359d9941d0 Bump version to 1.2.6 for new dev cycle 2014-06-02 09:53:30 +08:00
Roman Bogorodskiy
0541727cf7 bhyve: report cpuTime in bhyveDomainGetInfo
Add a helper function virBhyveGetDomainTotalCpuStats() to
obtain process CPU time using kvm (kernel memory interface)
and use it to set cpuTime field of the virDomainInfo struct in
bhyveDomainGetInfo().
2014-05-05 18:03:15 +04:00
John Ferlan
5c2f782f76 Bump version to 1.2.5 for new dev cycle 2014-05-04 08:57:00 -04:00
Sahid Orentino Ferdjaoui
b21795bb5b Add a new example to illustrate domain migration
This commit adds a new example to illustrate peer to
peer domain migration with virDomainMigrateToURI.

Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@cloudwatt.com>
2014-04-30 14:29:07 +01:00
Daniel P. Berrange
0e285a588a Disable libvirtd by default when building on Win32
We don't support building libvirtd on Win32 since we lack the
fork/exec feature needed for the stateful drivers. Disable this
by default, so users can just do 'mingw32-configure' with no
special args required.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-04-29 11:30:32 +01:00
Cédric Bosdonnat
ec70f3696f Introduce --without-pm-utils to get rid of pm-is-supported dependency
This uses the dbus api of systemd to check the power management
capabilities of the node.
2014-04-11 15:51:10 -06:00
Peter Krempa
56746d8ad6 maint: Correctly detect wether "gluster" cli tool is accessible
The configure definition previously always defined the GLUSTER_CLI macro
and thus the code needing it wasn't compiled out if the tool wasn't
accessible.
2014-04-07 13:20:28 +02:00
Peter Krempa
05671b95db storage: netfs: Support lookup of glusterfs pool sources
https://bugzilla.redhat.com/show_bug.cgi?id=1072714

Use the "gluster" command line tool to retrieve information about remote
volumes on a gluster server to allow storage pool source lookup.

Unfortunately gluster doesn't provide a management library so that we
could use that directly, instead the RPC calls are hardcoded in the
command line tool.
2014-04-01 11:06:05 +02:00
Michal Privoznik
09544abf2a Bump version to 1.2.4 for new dev cycle
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-04-01 10:22:22 +02:00
Ján Tomko
b7a5a6ab57 Fix typo in configure.ac
s/profram/program/
2014-03-21 10:04:59 +01:00
Ján Tomko
69ad6b5756 Define ISCSIADM unconditionally
Commit 5e1d5dd moved the functions using isciadm to util/viriscsi.c,
but ISCSIADM was only defined when the iscsi backend was compiled in.

Define it unconditionally to fix the build (and allow testing
of viriscsi.c) even if iscsi backend is disabled.
2014-03-21 09:06:13 +01:00
Roman Bogorodskiy
2c4870d04f Fix missing char dev lock path case in configure
configure check for character devices lock path calls
AC_DEFINE_UNQUOTED for VIR_CHRDEV_LOCK_FILE_PATH even if
$with_chrdev_lock_files = "no".

So the locking code in conf/virchrdev.c:

 #ifdef VIR_CHRDEV_LOCK_FILE_PATH

is compiled in even if it shouldn't, because VIR_CHRDEV_LOCK_FILE_PATH
is defined as "no", so it tries to create lock files with strange
lock path like 'no/LCK..'.

Fix that by calling AC_DEFINE_UNQUOTED only if $with_chrdev_lock_files
is not 'no'.
2014-03-05 22:51:59 +04:00
Michal Privoznik
852582ea9b Bump version to 1.2.3 for new dev cycle
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-03-03 09:43:25 +01:00
Michal Privoznik
68954fb25c virNetServerRun: Notify systemd that we're accepting clients
Systemd does not forget about the cases, where client service needs to
wait for daemon service to initialize and start accepting new clients.
Setting a dependency in client is not enough as systemd doesn't know
when the daemon has initialized itself and started accepting new
clients. However, it offers a mechanism to solve this. The daemon needs
to call a special systemd function by which the daemon tells "I'm ready
to accept new clients". This is exactly what we need with
libvirtd-guests (client) and libvirtd (daemon). So now, with this
change, libvirt-guests.service is invoked not any sooner than
libvirtd.service calls the systemd notify function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-02-24 10:54:48 +01:00
Daniel P. Berrange
590029f672 Introduce new OOM testing support
The previous OOM testing support would re-run the entire "main"
method each iteration, failing a different malloc each time.
When a test suite has 'n' allocations, the number of repeats
requires is  (n * (n + 1) ) / 2.  This gets very large, very
quickly.

This new OOM testing support instead integrates at the
virtTestRun level, so each individual test case gets repeated,
instead of the entire test suite. This means the values of
'n' are orders of magnitude smaller.

The simple usage is

   $ VIR_TEST_OOM=1 ./qemuxml2argvtest
   ...
   29) QEMU XML-2-ARGV clock-utc                                         ... OK
       Test OOM for nalloc=36 .................................... OK
   30) QEMU XML-2-ARGV clock-localtime                                   ... OK
       Test OOM for nalloc=36 .................................... OK
   31) QEMU XML-2-ARGV clock-france                                      ... OK
       Test OOM for nalloc=38 ...................................... OK
   ...

the second lines reports how many mallocs have to be failed, and thus
how many repeats of the test will be run.

If it crashes, then running under valgrind will often show the problem

  $ VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest

When debugging problems it is also helpful to select an individual
test case

  $ VIR_TEST_RANGE=30 VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest

When things get really tricky, it is possible to request that just
specific allocs are failed. eg to fail allocs 5 -> 12, use

  $ VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-12 ../run valgrind ./qemuxml2argvtest

In the worse case, you might want to know the stack trace of the
alloc which was failed then VIR_TEST_OOM_TRACE can be set. If it
is set to 1 then it will only print if it thinks a mistake happened.
This is often not reliable, so setting it to 2 will make it print
the stack trace for every alloc that is failed.

  $ VIR_TEST_OOM_TRACE=2 VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-5 ../run valgrind ./qemuxml2argvtest
  30) QEMU XML-2-ARGV clock-localtime                                   ... OK
      Test OOM for nalloc=36 !virAllocN
  /home/berrange/src/virt/libvirt/src/util/viralloc.c:180
  virHashCreateFull
  /home/berrange/src/virt/libvirt/src/util/virhash.c:144
  virDomainDefParseXML
  /home/berrange/src/virt/libvirt/src/conf/domain_conf.c:11745
  virDomainDefParseNode
  /home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12646
  virDomainDefParse
  /home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12590
  testCompareXMLToArgvFiles
  /home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:106
  virtTestRun
  /home/berrange/src/virt/libvirt/tests/testutils.c:250
  mymain
  /home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:418 (discriminator 2)
  virtTestMain
  /home/berrange/src/virt/libvirt/tests/testutils.c:750
  ??
  ??:0
  _start
  ??:?
   FAILED

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-02-20 15:36:10 +00:00