Commit Graph

56 Commits

Author SHA1 Message Date
Cole Robinson
8b5bc6c479 qemu: Add a qemu.conf option for clearing capabilities
Currently there is no way to opt out of libvirt dropping POSIX
capabilities for qemu. This at least is a useful debugging tool, but
is also wanted by users (and distributors):

https://bugzilla.redhat.com/show_bug.cgi?id=559154
https://bugzilla.redhat.com/show_bug.cgi?id=573850

v2: Clarify qemu.conf comment, warn about security implications

v3: Add .aug changes
2010-06-01 13:01:17 -04:00
Alex Williamson
c444af1ac2 Pass pre-opened PCI device sysfs config file to QEMU
This allows libvirt to open the PCI device sysfs config file prior
to dropping privileges so qemu can access the full config space.
Without this, a de-privileged qemu can only access the first 64
bytes of config space.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Detect support
  for pci-assign.configfd option. Use this option when formatting
  PCI device string if possible
* src/qemu/qemu_driver.c: Pre-open PCI sysfs config file and pass
  to QEMU
2010-05-26 17:41:55 +01:00
Stefan Berger
a8f75d2c7d vepa: parsing for 802.1Qb{g|h} XML
This patch parses the following two XML descriptions, one for
802.1Qbg and one for 802.1Qbh, and stores the data internally.
The actual triggering of the switch setup protocol has not been
implemented here but the relevant code to do that should go into
the functions associatePortProfileId() and disassociatePortProfileId().

   <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbg'>
        <parameters managerid='12' typeid='0x123456' typeidversion='1'
         instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/>
      </virtualport>
      <filterref filter='clean-traffic'/>
    </interface>

    <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbh'>
        <parameters profileid='my_profile'/>
      </virtualport>
    </interface>

I'd suggest to use this patch as a base for triggering the setup
protocol with the 802.1Qb{g|h} switch.

Several rounds of changes were made to this patch. The
following is a list of these changes.
- Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams
  as per Daniel Berrange's request
- Addressing Daniel Berrange's comments:
 - removing macvtap.h's dependency on domain_conf.h by
   moving the virVirtualPortProfileDef structure into macvtap.h
   and not passing virtDomainNetDefPtr to any functions in
   macvtap.c
- Addressed most of Chris Wright's comments:
  - indicating error in case virtualport XML node cannot be parsed
    properly
  - parsing hex and decimal numbers using virStrToLong_ui() with
    parameter '0' for base
  - tgifname (target interface name) variable wasn't necessary
    to pass to openMacvtapTap function anymore
- assigning the virtual port data structure to the virDomainNetDef
  only if it was previously parsed
- make sure that the error code returned by openMacvtapTap() is a negative n
  in case the associatePortProfileId() function failed.
- renaming vsi in the XML to virtualport
- replace all occurrences of vsi in the source as well
- removing mode and MAC address parameters from the functions that
  will communicate with the hareware diretctly or indirectly
- moving the associate and disassociate functions to the end of the
  file for subsequent patches to easier make them generally available
  for export
- passing the macvtap interface name rather than the link device since
  this otherwise gives funny side effects when using netlink messages
  where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev
  all of a sudden gets the MAC address of the macvtap interface.
- Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case
  we wanted to use hook scripts for the setup and so the setup doesn't fail
  here.
- if instance ID UUID is not supplied it will automatically be generated
  - adapted schema to make instance ID UUID optional
  - added test case
- parser and XML generator have been separated into their own
  functions so they can be re-used elsewhere (passthrough case
  for example)
- Adapted XML parser and generator support the above shown type
  (802.1Qbg, 802.1Qbh).
- Adapted schema to above XML
- Adapted test XML to above XML
- Passing through the VM's UUID which seems to be necessary for
  802.1Qbh -- sorry no host UUID
- adding virtual function ID to association function, in case it's
  necessary to use (for SR-IOV)
2010-05-25 17:37:00 -04:00
Cole Robinson
fb3ebd0397 qemu: Allow using regular audio backends with VNC
Currently all host audio backends are disabled if a VM is using VNC, in
favor of the QEMU VNC audio extension. Unfortunately no released VNC
client supports this extension, so users have no way of getting audio
to work if using VNC.

Add a new config option in qemu.conf which allows changing libvirt's
behavior, but keep the default intact.

v2: Fix doc typos, change name to vnc_allow_host_audio
2010-05-25 10:49:29 -04:00
Jim Fehlig
ba196952f5 Fix race in finding available vnc port
The qemu driver contains a subtle race in the logic to find next
available vnc port.  Currently it iterates through all available ports
and returns the first for which bind(2) succeeds.  However it is possible
that a previously issued port has not yet been bound by qemu, resulting
in the same port used for a subsequent domain.

This patch addresses the race by using a simple bitmap to "reserve" the
ports allocated by libvirt.

V2:
  - Put port bitmap in struct qemud_driver
  - Initialize bitmap in qemudStartup

V3:
  - Check for failure of virBitmapGetBit
  - Additional check for port != -1 before calling virbitmapClearBit

V4:
  - Check for failure of virBitmap{Set,Clear}Bit
2010-05-21 11:29:03 -06:00
Alex Williamson
7e1249f259 Rename qemuBuildCommandLine tapfds -> vmfds.
There doesn't seem to be anything specific to tap devices for this
array of file descriptors which need to stay open of the guest to use.
Rename then for others to make use of.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-05-20 10:05:20 -04:00
Eric Blake
f30ccb2458 qemu_conf: fix flag value
(gdb) p/x QEMUD_CMD_FLAG_VNET_HOST
$7 = 0xffffffff80000000

Oops - that meant we were incorrectly setting QEMU_CMD_FLAG_RTC_TD_HACK
for qemu-kvm-0.12.3 (and probably botching a few other settings as well).

Fixes Red Hat BZ#592070

* src/qemu/qemu_conf.h (QEMUD_CMD_FLAG_VNET_HOST): Avoid sign
extension.
* tests/qemuhelpdata/qemu-kvm-0.12.3: New file.
* tests/qemuhelptest.c (mymain): Add another case.
2010-05-17 16:28:02 -06:00
Daniel P. Berrange
c4896d378b Fix CDROM media change for QEMU when using -device syntax
Disk devices in QEMU have two parts, the guest device and the host
backend driver. Historically these two parts have had the same
"unique" name. With the switch to using -device though, they now
have separate names. Thus when changing CDROM media, for guests
using -device syntax, we need to prepend the QEMU_DRIVE_HOST_PREFIX
constant

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add helper function
  qemuDeviceDriveHostAlias() for building a host backend alias
* src/qemu/qemu_driver.c: Use qemuDeviceDriveHostAlias() to determine
  the host backend alias for performing eject/change commands in the
  monitor
2010-04-15 18:09:42 +01:00
Daniel P. Berrange
db336caa58 Update QEMU device_add command in JSON mode
The device_add command was added in JSON mode in a way I didn't
expect. Instead of passing the normal device string to the JSON
command:

    { "execute": "device_add", "arguments": { "device": "ne2k_pci,id=nic.1,netdev=net.1" } }

We need to split up the device string into a full JSON object

    { "execute": "device_add", "arguments": { "driver": "ne2k_pci", "id": "nic.1", "netdev": "net.1" } }

* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Rename the
  qemuCommandLineParseKeywords method to qemuParseKeywords
  and export it to monitor
* src/qemu/qemu_monitor_json.c: Split up device string into
  a JSON object for device_add command
2010-04-15 18:08:04 +01:00
Chris Lalancette
462c74c38a Snapshot QEMU driver.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-04-05 10:24:51 -04:00
Daniel Veillard
6e41f30efc Implement managed save operations for qemu driver
The images are saved in /var/lib/libvirt/qemu/save/
and named $domainname.save . The directory is created appropriately
at daemon startup. When a domain is started while a saved image is
available, libvirt will try to load this saved image, and start the
domain as usual in case of failure. In any case the saved image is
discarded once the domain is created.

* src/qemu/qemu_conf.h: adds an extra save path to the driver config
* src/qemu/qemu_driver.c: implement the 3 new operations and handling
  of the image directory
2010-04-04 11:36:46 +02:00
Laine Stump
0fdf649672 Add flags to indicate presence of timekeeping-related qemu options
* src/qemu/qemu_conf.h: define 4 new flags
* src/qemu/qemu_conf.c: check the help text of qemu for presence of
                        features indicated by each flag.
* tests/qemuhelptest.c: add appropriate flags into the masks for each test
2010-03-30 13:57:40 +02:00
Laine Stump
598a0c00dc Support vhost-net mode at qemu startup for virtio network devices
Attempt to turn on vhost-net mode for devices of type NETWORK, BRIDGE,
and DIRECT (macvtap).

* src/qemu/qemu_conf.h: add vhostfd to qemuBuildHostNetStr prototype
  add qemudOpenVhostNet prototype new flag to set when :,vhost=" found in
  qemu help
* src/qemu/qemu_conf.c: * set QEMUD_CMD_FLAG_VNET_HOST is ",vhost=" found
  in qemu help
   - qemudOpenVhostNet - opens /dev/vhost-net to pass to qemu if everything
     is in place to use it.
   - qemuBuildHostNetStr - add vhostfd to commandline if it's not empty
     (higher levels decide whether or not to fill it in)
   - qemudBuildCommandLine - if /dev/vhost-net is successfully opened, add
     its fd to tapfds array so it isn't closed on qemu exec, and populate
     vhostfd_name to be passed in to commandline builder.
* src/qemu/qemu_driver.c: add filler 0 for new arg to qemuBuildHostNetStr,
  along with a note that this must be implemented in order for hot-plug of
  vhost-net virtio devices to work properly (once qemu "netdev_add" monitor
  command is implemented).
2010-03-19 16:58:14 +01:00
Eric Blake
36d8e7d8d7 build: consistently indent preprocessor directives
* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done
2010-03-09 19:22:28 +01:00
Eric Blake
2e56fb2bcc build: consistently use C99 varargs macros
Prior to this patch, there was an inconsistent mix between GNU and C99.

For consistency, and potential portability to other compilers, stick
with the C99 vararg macro syntax.

* src/conf/cpu_conf.c (virCPUReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/conf/domain_conf.c (virDomainReportError): Likewise.
* src/conf/domain_event.c (eventReportError): Likewise.
* src/conf/interface_conf.c (virInterfaceReportError): Likewise.
* src/conf/network_conf.c (virNetworkReportError): Likewise.
* src/conf/node_device_conf.h (virNodeDeviceReportError): Likewise.
* src/conf/secret_conf.h (virSecretReportError): Likewise.
* src/conf/storage_conf.h (virStorageReportError): Likewise.
* src/esx/esx_device_monitor.c (ESX_ERROR): Use C99 rather than
  GNU vararg macro syntax.
* src/esx/esx_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_interface_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_network_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_secret_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_storage_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_util.c (ESX_ERROR): Likewise.
* src/esx/esx_vi.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vi_methods.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vi_types.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vmx.c (ESX_ERROR): Likewise.
* src/util/hostusb.c (usbReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/util/json.c (virJSONError): Likewise.
* src/util/macvtap.c (ReportError): Likewise.
* src/util/pci.c (pciReportError): Likewise.
* src/util/stats_linux.c (virStatsError): Likewise.
* src/util/util.c (virUtilError): Likewise.
* src/util/xml.c (virXMLError): Likewise.
* src/xen/proxy_internal.c (virProxyError): Use C99 rather than
  GNU vararg macro syntax.
* src/xen/sexpr.c (virSexprError): Likewise.
* src/xen/xen_driver.c (xenUnifiedError): Likewise.
* src/xen/xen_hypervisor.c (virXenError): Likewise.
* src/xen/xen_inotify.c (virXenInotifyError): Likewise.
* src/xen/xend_internal.c (virXendError): Likewise.
* src/xen/xm_internal.c (xenXMError): Likewise.
* src/xen/xs_internal.c (virXenStoreError): Likewise.
* src/cpu/cpu.h (virCPUReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/datatypes.c (virLibConnError): Likewise.
* src/interface/netcf_driver.c (interfaceReportError): Likewise.
* src/libvirt.c (virLibStreamError): Likewise.
* src/lxc/lxc_conf.h (lxcError): Likewise.
* src/network/bridge_driver.c (networkReportError): Likewise.
* src/nodeinfo.c (nodeReportError): Likewise.
* src/opennebula/one_conf.h (oneError): Likewise.
* src/openvz/openvz_conf.h (openvzError): Likewise.
* src/phyp/phyp_driver.c (PHYP_ERROR): Likewise.
* src/qemu/qemu_conf.h (qemuReportError): Likewise.
* src/remote/remote_driver.c (errorf): Likewise.
* src/security/security_driver.h (virSecurityReportError): Likewise.
* src/test/test_driver.c (testError): Likewise.
* src/uml/uml_conf.h (umlReportError): Likewise.
* src/vbox/vbox_driver.c (vboxError): Likewise.
* src/vbox/vbox_tmpl.c (vboxError): Likewise.
2010-03-08 13:32:27 +01:00
Daniel P. Berrange
200c83b29d Support variable clock offset mode in QEMU
This allows QEMU guests to be started with an arbitrary clock
offset

The test case can't actually be enabled, since QEMU argv expects
an absolute timestring, and this will obviously change every
time the test runs :-( Hopefully QEMU will allow a relative
time offset in the future.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Use the -rtc arg
  if available to support variable clock offset mode
* tests/qemuhelptest.c: Add QEMUD_CMD_FLAG_RTC for qemu 0.12.1
* qemuxml2argvdata/qemuxml2argv-clock-variable.args,
  qemuxml2argvdata/qemuxml2argv-clock-variable.xml,
  qemuxml2argvtest.c: Test case, except we can't actually enable
  it yet.
2010-03-01 18:41:40 +00:00
Cole Robinson
a09af3b004 qemu: Report binary path if error parsing -help 2010-02-25 11:43:57 -05:00
Stefan Berger
b3e7890ada macvtap mac_filter support
This patch adds the mac_filter support to the macvtap device.
2010-02-19 15:41:30 +01:00
Stefan Berger
e52687e88f macvtap IFF_VNET_HDR configuration
This patch sets or unsets the IFF_VNET_HDR flag depending on what device
is used in the VM. The manipulation of the flag is done in the open
function and is only fatal if the IFF_VNET_HDR flag could not be cleared
although it has to be (or if an ioctl generally fails). In that case the
macvtap tap is closed again and the macvtap interface torn.

* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: pass qemuCmdFlags to
  qemudPhysIfaceConnect()
* src/util/macvtap.c src/util/macvtap.h: add vnet_hdr boolean to
  openMacvtapTap(), and private function configMacvtapTap()
* src/qemu/qemu_driver.c: add extra qemuCmdFlags when calling
  qemudPhysIfaceConnect()
2010-02-19 11:38:57 +01:00
Matthew Booth
3ec09478de Add QEMU support for virtio channel
Support virtio-serial controller and virtio channel in QEMU backend.
Will output
the following for virtio-serial controller:

-device
virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4,max_ports=16,vectors=4

and the following for a virtio channel:

-chardev pty,id=channel0 \
-device
virtserialport,bus=virtio-serial0.0,chardev=channel0,name=org.linux-kvm.port.0

* src/qemu/qemu_conf.c: Add argument output for virtio
* tests/qemuxml2argvtest.c
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args: Add test for
  QEMU command line generation
2010-02-18 17:56:50 +01:00
Stefan Berger
a1b1ab1478 macvtap support for libvirt -- qemu support
This part adds support for qemu making a macvtap tap device available
via file descriptor passed to qemu command line. This also attempts to
tear down the macvtap device when a VM terminates. This includes support
for attachment and detachment to/from running VM.
* src/qemu/qemu_conf.[ch] src/qemu/qemu_driver.c: add support in the
  QEmu driver
2010-02-15 17:47:29 +01:00
Daniel P. Berrange
7357975000 Fix disk stats retrieval with QEMU >= 0.12
With QEMU >= 0.12 the host and guest side of disks no longer have
the same naming convention. Specifically the host side will now
get a 'drive-' prefix added to its name. The 'info blockstats'
monitor command returns the host side name, so it is neccessary
to strip this off when looking up stats since libvirt stores the
guest side name !

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Move 'drive-' prefix
  string to a defined constant
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Strip
  off 'drive-' prefix (if found) when looking up disk stats
2010-02-11 12:07:23 +00:00
Daniel P. Berrange
38536d6f7f Annotate some virConnectPtr as mandatory non-null
Use the ATTRIBUTE_NONNULL annotation to mark some virConnectPtr
args as mandatory non-null so the compiler can warn of mistakes

* src/conf/domain_event.h: All virConnectPtr args must be non-null
* src/qemu/qemu_conf.h: qemudBuildCommandLine and
  qemudNetworkIfaceConnect() must be given non-null connection
* tests/qemuxml2argvtest.c: Provide a non-null (dummy) connection to
  qemudBuildCommandLine()
2010-02-10 13:33:06 +00:00
Daniel P. Berrange
910b019f93 Convert qemu command line flags to 64-bit int
The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
  tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
  Use 'unsigned long long' for QEMU flags
2010-02-10 12:09:41 +00:00
Daniel P. Berrange
caa805ea64 Remove passing of virConnectPtr throughout QEMU driver 2010-02-10 11:49:23 +00:00
Matthias Bolte
a5ab900d26 Remove conn parameter from virReportSystemError 2010-02-09 01:04:54 +01:00
Daniel P. Berrange
719c50caf8 Fix QEMU hotplug device alias assignment
To allow devices to be hot(un-)plugged it is neccessary to ensure
they all have a unique device aliases. This fixes the hotplug
methods to assign device aliases before invoking the monitor
commands which need them

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Expose methods
  for assigning device aliases for disks, host devices and
  controllers
* src/qemu/qemu_driver.c: Assign device aliases when hotplugging
  all types of device
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address-device.args:
  Update for changed hostdev naming scheme
2010-02-02 16:31:47 +00:00
Daniel P. Berrange
16478459da Re-arrange QEMU device alias assignment code
This patch re-arranges the QEMU device alias assignment code to
make it easier to call into the same codeblock when performing
device hotplug. The new code has the ability to skip over already
assigned names to facilitate hotplug

* src/qemu/qemu_driver.c: Call qemuAssignDeviceNetAlias()
  instead of qemuAssignNetNames
* src/qemu/qemu_conf.h: Export qemuAssignDeviceNetAlias()
  instead of qemuAssignNetNames
* src/qemu/qemu_driver.c: Merge the legacy disk/network alias
  assignment code into the main methods
2010-02-02 16:31:47 +00:00
Daniel P. Berrange
0943048ad0 Remove direct storage of hostnet_name & vlan
The current way of assigning names to the host network backend and
NIC device in QEMU was over complicated, by varying naming scheme
based on the NIC model and backend type. This simplifies the naming
to simply be 'net0' and 'hostnet0', allowing code to easily determine
the host network name and vlan based off the primary device alias
name 'net0'. This in turn allows removal of alot of QEMU specific
code from the XML parser, and makes it easier to assign new unique
names for NICs that are hotplugged

* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove hostnet_name
  and vlan fields from virNetworkDefPtr
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c:
  Use a single network alias naming scheme regardless of NIC type
  or backend type. Determine VLANs from the alias name.
* tests/qemuxml2argvdata/qemuxml2argv-net-eth-names.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args: Update
  for new simpler naming scheme
2010-02-02 16:31:47 +00:00
Daniel P. Berrange
49a0f6cd99 Remove use of -netdev arg with QEMU
The QEMU 0.12.x tree has the -netdev command line argument, but not
corresponding monitor command. We can't enable the former, without
the latter since it will break hotplug/unplug.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Disable -netdev usage
  until 0.13 at earliest
* tests/qemuxml2argvtest.c: Add test for -netdev syntax
* tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.xml: Test
  data files for -netdev syntax
2010-02-02 16:31:47 +00:00
Daniel P. Berrange
d8acc44672 Assign PCI addresses before hotplugging devices
PCI disk, disk controllers, net devices and host devices need to
have PCI addresses assigned before they are hot-plugged

* src/qemu/qemu_conf.c: Add APIs for ensuring a device has an
  address and releasing unused addresses
* src/qemu/qemu_driver.c: Ensure all devices have addresses
  when hotplugging.
2010-02-02 16:31:47 +00:00
Daniel P. Berrange
9258ec0a2e Rewrite way QEMU PCI addresses are allocated
The current QEMU code allocates PCI addresses incrementally starting
at 4. This is not satisfactory because the user may have given some
addresses in their XML config, which need to be skipped over when
allocating addresses to remaining devices.

It is thus neccessary to maintain a list of already allocated PCI
addresses and then only allocate ones that remain unused. This is
also required for domain device hotplug to work properly later.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add APIs for creating
  list of existing PCI addresses, and allocating new addresses.
  Refactor address assignment to use this code
* src/qemu/qemu_driver.c: Pull PCI address assignment up into the
  qemuStartVMDaemon() method, as a prelude to moving it into the
  'define' method. Update list of allocated addresses when connecting
  to a running VM at daemon startup.
* tests/qemuxml2argvtest.c, tests/qemuargv2xmltest.c,
  tests/qemuxml2xmltest.c: Remove USB product test since all
  passthrough is done based on address
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args,
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml: Kil
  unused data files
2010-02-02 16:31:47 +00:00
Daniel P. Berrange
96c8608dc5 Split out QEMU code for building PCI/USB hostdev arg values
To allow for better code reuse from hotplug methods, the code for
generating PCI/USB hostdev arg values is split out into separate
methods

* qemu/qemu_conf.h, qemu/qemu_conf.c: Introduce new APis for
  qemuBuildPCIHostdevPCIDevStr, qemuBuildUSBHostdevUsbDevStr
  and qemuBuildUSBHostdevDevStr
2010-02-02 15:41:29 +00:00
Daniel P. Berrange
c129d4fe45 Standard internal API syntax for building QEMU command line arguments
All the helper functions for building command line arguments
now return a 'char *', instead of acepting a 'char **' or
virBufferPtr argument

* qemu/qemu_conf.c: Standardize syntax for building args
* qemu/qemu_conf.h: Export all functions for building args
* qemu/qemu_driver.c: Update for changed syntax for building
  NIC/hostnet args
2010-02-02 15:41:25 +00:00
Daniel P. Berrange
15f5eaa098 Introduce a new DAC security driver for QEMU
This new security driver is responsible for managing UID/GID changes
to the QEMU process, and any files/disks/devices assigned to it.

* qemu/qemu_conf.h: Add flag for disabling automatic file permission
  changes
* qemu/qemu_security_dac.h, qemu/qemu_security_dac.c: New DAC driver
  for QEMU guests
* Makefile.am: Add new files
2010-01-21 14:00:16 +00:00
Daniel P. Berrange
80fd73ca09 Introduce a stacked security driver impl for QEMU
* qemu/qemu_conf.h: Add securityPrimaryDriver and
  securitySecondaryDriver fields to 'struct qemud_driver'
* Makefile.am: Add new files
* qemu/qemu_security_stacked.c, qemu/qemu_security_stacked.h: A
  simple stacked security driver
2010-01-21 14:00:16 +00:00
Jiri Denemark
a3e1f04b76 Use pciDeviceIsAssignable in qemu driver
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2010-01-19 17:30:41 +01:00
Jiri Denemark
5d462bd0b3 Implement CPU topology support for QEMU driver
QEMU's command line equivalent for the following domain XML fragment
    <vcpus>2</vcpus>
    <cpu ...>
        ...
        <topology sockets='1' cores='2', threads='1'/>
    </cpu>

is

    -smp 2,sockets=1,cores=2,threads=1

This syntax was introduced in QEMU-0.12.

Version 2 changes:
- -smp argument build split into a separate function
- always add ",sockets=S,cores=C,threads=T" to -smp if qemu supports it
- use qemuParseCommandLineKeywords for command line parsing

Version 3 changes:
- ADD_ARG_LIT => ADD_ARG and line reordering in qemudBuildCommandLine
- rebased

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2010-01-19 11:40:09 +01:00
Daniel P. Berrange
4f6c999006 Add support for explicit -sdl flag to QEMU
Not all QEMU builds default to SDL graphics for their display.
Newer QEMU now has an explicit -sdl flag, which we can use to
explicitly request SDL intead of relying on the default. This
protects libvirt against unexpected changes in graphics default

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Probe for -sdl
  flag and use it if it is found
* tests/qemuhelptest.c: Add SDL flag to tests
2010-01-18 13:55:57 +00:00
Daniel P. Berrange
1ed1bf3a38 Probe for -device and use -nodefaults
Probe for the new -device flag and if available set the -nodefaults
flag, instead of using -net none, -serial none or -parallel none.
Other device types will be converted to use -device in later patches.
The -nodefaults flag will help avoid unwelcome surprises from future
QEMU releases

* src/qemu/qemu_conf.c: Probe for -device. Add -nodefaults flag.
  Remove -net none, -serial none or -parallel none
* src/qemu/qemu_conf.h: Define QEMU_CMD_FLAG_DEVICE
* tests/qemuhelpdata/qemu-0.12.1: New data file for 0.12.1 QEMU
* tests/qemuhelptest.c: Test feature extraction from 0.12.1 QEMU
2010-01-18 13:39:14 +00:00
Daniel P. Berrange
2982d73a11 Split code for building QEMU -drive arg in separate method
To enable it to be called from multiple locations, split out
the code for building the -drive arg string. This will be needed
by later patches which do drive hotplug, the conversion to use
-device, and the conversion to controller/bus/unit addressing

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add qemuBuildDriveStr
  for building -drive arg string
2010-01-15 17:55:58 +00:00
Adam Litke
7a90f21655 qemu: Always enable the virtio balloon driver
The behavior for the qemu balloon device has changed.  Formerly, a virtio
balloon device was provided by default.  Now, '-balloon virtio' must be
specified on the command line to enable it.  This patch causes libvirt to
add '-balloon virtio' to the command line whenever the -balloon option is
available.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: check for the new flag and
  add "-baloon vitio" to qemu command when needed
* tests/qemuhelptest.c: add the new flag for detection
2010-01-06 18:01:51 +01:00
Daniel P. Berrange
27c357bcfa Disable JSON mode monitor until QEMU is more mature
* src/qemu/qemu_conf.h: Remove QEMU_CMD_FLAG_0_12 and just leave
  the lone JSON flag
* src/qemu/qemu_conf.c: Enable JSON on QEMU 0.13 or later, but
  leave it disabled for now
2009-12-22 11:43:48 +00:00
Jiri Denemark
ffb13b1115 Implement CPU selection in QEMU driver
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h src/qemu/qemu_driver.c:
  add the new entry point, extend capabilities and code to interract
  with qemu
2009-12-18 16:24:14 +01:00
Daniel P. Berrange
3a4f172fdd Support for JSON mode monitor
Initial support for the new QEMU monitor protocol  using JSON
as the data encoding format instead of plain text

* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
  mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
2009-12-08 13:46:54 +00:00
Steve Yarmie
b827338a72 qemu-kvm needs -enable-kvm flag for VT optimization
Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.

* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
  line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
  and qemu-kvm-0.11.0-rc2 regression tests
2009-11-20 15:41:05 +01:00
Daniel P. Berrange
41d8968d43 Wrap text mode monitor APIs, pass qemuMonitorPtr directly to APIs
Change the QEMU driver to not directly invoke the text mode monitor
APIs. Instead add a generic wrapper layer, which will eventually
invoke either the text or JSON protocol code as needed. Pass an
qemuMonitorPtr object into the monitor APIs instead of virDomainObjPtr
to complete the de-coupling of the monitor impl from virDomainObj
data structures

* src/qemu/qemu_conf.h: Remove qemuDomainObjPrivate definition
* src/qemu/qemu_driver.c: Add qemuDomainObjPrivate definition.
  Pass qemuMonitorPtr into all monitor APIs instead of the
  virDomainObjPtr instance.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add thin
  wrappers for all qemuMonitorXXX command APIs, calling into
  qemu_monitor_text.c/h
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Rename qemuMonitor -> qemuMonitorText & update to accept
  qemuMonitorPtr instead of virDomainObjPtr
2009-11-10 12:15:27 +00:00
Daniel P. Berrange
1cfd5a00eb Make use of private data structure for monitor state
Introduce a new qemuDomainObjPrivate object which is used to store
the private QEMU specific data associated with each virDomainObjPtr
instance. This contains a single member, an instance of the new
qemuMonitorPtr object which encapsulates the QEMU monitor state.
The internals of the latter are private to the qemu_monitor* files,
not to be shown to qemu_driver.c

* src/qemu/qemu_conf.h: Definition of qemuDomainObjPrivate.
* src/qemu/qemu_driver.c: Register a functions for creating
  and freeing qemuDomainObjPrivate instances with the domain
  capabilities. Remove the qemudDispatchVMEvent() watch since
  I/O watches are now handled by the monitor code itself. Pass
  a new qemuHandleMonitorEOF() callback into qemuMonitorOpen
  to allow notification when the monitor quits.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Introduce
  the 'qemuMonitor' object. Temporarily add new APIs
  qemuMonitorWrite, qemuMonitorRead, qemuMonitorWaitForInput
  to allow text based monitor impl to perform I/O.
* src/qemu/qemu_monitor_text.c: Call APIs for reading/writing
  to monitor instead of accessing the file handle directly.
2009-11-10 12:14:30 +00:00
Matthew Booth
7400396801 Detect availability of QEMU -chardev CLI option
* src/qemu/qemu_conf.h: defines a new QEMUD_CMD_FLAG_CHARDEV flag
* src/qemu/qemu_conf.c: parse the output for -chardev and set flag
  appropriately
2009-11-05 14:41:24 +01:00
Gerhard Stenzel
0aa72ac6fd add MAC address based port filtering to qemu
* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is
  a new config type option for mac filtering
* src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points
* src/qemu/qemu_driver.c: plug the MAC filtering at the right places
  in the domain life cycle
* src/Makefile.am po/POTFILES.in: add the new module
2009-11-03 23:44:48 +01:00