In qemu 2.3, the migration status will include 'cancelling' in the
window between when an asynchronous cancel has been requested and
when the migration is actually halted. Previously, qemu hid this
state and reported 'active'. Libvirt manages the sequence okay
even when the string is unrecognized (that is, it will report an
unknown state:
Migration: [ 69 %]^Cerror: internal error: unexpected migration status in cancelling.
but the migration is still cancelled), but recognizing the string
makes for a smoother user experience.
* src/qemu/qemu_monitor.h
(QEMU_MONITOR_MIGRATION_STATUS_CANCELLING): Add enum.
* src/qemu/qemu_monitor.c (qemuMonitorMigrationStatus): Map it.
* src/qemu/qemu_migration.c (qemuMigrationUpdateJobStatus): Adjust
clients.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetMigrationStatusReply): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
virnetdevopenvswitch.h declares a few functions that can be called to
add ports to and remove them from OVS bridges, and retrieve the
migration data for a port. It does not contain any data definitions
that are used by domain_conf.h. But for some reason, domain_conf.h
virnetdevopenvswitch.h should be directly #including it. This adds a
few lines to the project, but saves all the files that don't need it
from the extra computing, and makes the dependencies more clear cut.
Problem Description:
When we set boot order for a vhost-user network interface, we found the boot index
doesn't work.
Cause of the Problem:
In the function qemuBuildVhostuserCommandLine(), it forcely set the arg bootindex of
function qemuBuildNicDevStr() to 0. Thus, the bootindex parameter got missing.
Solution:
Trans the arg bootindex down.
Signed-off-by: Gao Haifeng <gaohaifeng.gao@huawei.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
When libvirt is starting a domain, it reports the state as SHUTOFF until
it's RUNNING. This is not ideal because domain startup may take a long
time (usually because of some configuration issues, firewalls blocking
access to network disks, etc.) and domain lists provided by libvirt look
awkward. One can see weird shutoff domains with IDs in a list of active
domains or even shutoff transient domains. In any case, it looks more
like a bug in libvirt than a normal state a domain goes through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function needs a pointer to the network to get list of DHCP
leases. The pointer is obtained via virNetworkLookupByName() which
requires callers to free the returned network once no longer needed.
Otherwise it's leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we allow HW address to be not present on our RPC layer,
don't error out if qemu-ga hasn't provided any.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1199182 documents that
after a series of disk snapshots into existing destination images,
followed by active commits of the top image, it is possible for
qemu 2.2 and earlier to end up tracking a different name for the
image than what it would have had when opening the chain afresh.
That is, when starting with the chain 'a <- b <- c', the name
associated with 'b' is how it was spelled in the metadata of 'c',
but when starting with 'a', taking two snapshots into 'a <- b <- c',
then committing 'c' back into 'b', the name associated with 'b' is
now the name used when taking the first snapshot.
Sadly, older qemu doesn't know how to treat different spellings of
the same filename as identical files (it uses strcmp() instead of
checking for the same inode), which means libvirt's attempt to
commit an image using solely the names learned from qcow2 metadata
fails with a cryptic:
error: internal error: unable to execute QEMU command 'block-commit': Top image file /tmp/images/c/../b/b not found
even though the file exists. Trying to teach libvirt the rules on
which name qemu will expect is not worth the effort (besides, we'd
have to remember it across libvirtd restarts, and track whether a
file was opened via metadata or via snapshot creation for a given
qemu process); it is easier to just always directly ask qemu what
string it expects to see in the first place.
As a safety valve, we validate that any name returned by qemu
still maps to the same local file as we have tracked it, so that
a compromised qemu cannot accidentally cause us to act on an
incorrect file.
* src/qemu/qemu_monitor.h (qemuMonitorDiskNameLookup): New
prototype.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskNameLookup):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskNameLookup): New function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskNameLookup)
(qemuMonitorJSONDiskNameLookupOne): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit)
(qemuDomainBlockJobImpl): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Use the utilities introduced in the previous patches so the qemu
driver is able to create tap devices that are bound (and unbound
on domain destroyal) to Midonet virtual ports.
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
Only selected fields from the disk source were copied when cold updating
source in a CDROM drive. When such drive was backed by a network file
this resulted into corruption of the definition:
<disk type='network' device='cdrom'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='gluster' name='gluster-vol1(null)'>
<host name='localhost'/>
</source>
<target dev='vdc' bus='virtio'/>
<readonly/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</disk>
Update the whole source instead of cherry-picking elements.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166024
By querying the qemu guest agent with the QMP command
"guest-network-get-interfaces" and converting the received JSON
output to structured objects.
Although "ifconfig" is deprecated, IP aliases created by "ifconfig"
are supported by this API. The legacy syntax of an IP alias is:
"<ifname>:<alias-name>". Since we want all aliases to be clubbed
under parent interface, simply stripping ":<alias-name>" suffices.
Note that IP aliases formed by "ip" aren't visible to "ifconfig",
and aliases created by "ip" do not have any specific name. But
we are lucky, as qemu guest agent detects aliases created by both.
src/qemu/qemu_agent.h:
* Define qemuAgentGetInterfaces
src/qemu/qemu_agent.c:
* Implement qemuAgentGetInterface
src/qemu/qemu_driver.c:
* New function qemuGetDHCPInterfaces
* New function qemuDomainInterfaceAddresses
src/remote_protocol-sructs:
* Define new structs
tests/qemuagenttest.c:
* Add new test: testQemuAgentGetInterfaces
Test cases for IP aliases, 0 or multiple ipv4/ipv6 address(es)
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
We're parsing memballoon status period as unsigned int, but when we're
trying to set it, both we and qemu use signed int. That means large
values will get wrapped around to negative one resulting in error.
Basically the same problem as commit e3a7b874 was dealing with when
updating live domain.
QEMU changed the accepted value to int64 in commit 1f9296b5, but even
values as INT_MAX don't make sense since the value passed means seconds.
Hence adding capability flag for this change isn't worth it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140958
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In order not to leave old error messages set, this patch refactors the
code so the error is reported only when acted upon. The only such place
already rewrites any error, so cleaning up all the error reporting in
qemuMonitorSetMemoryStatsPeriod() is enough.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Patch 51f9f03a4ca50b070c0fbfb29748d49f583e15e1 introduces a regression
where if a blockCommit operation fails the disk is still marked as being
part of a block job but can't be unmarked later.
As pointed out by jtomko in his review of the IOThreads pinning code:
http://www.redhat.com/archives/libvir-list/2015-March/msg00495.html
there are some comments sprinkled in indicating IOThreads were using
the same structure as the VcpuPin code...
This is the first patch of a few that will change the virDomainVcpuPin*
structures and code to just virDomainPin* - starting with the data
structure naming...
During his review of the iothreads pin setting code, Pavel noted that
there was a potential memory leak with respect to how the newVcpuPin
is handled and the goto endjob's in failure paths which would not free
the memory. For reference, See:
http://www.redhat.com/archives/libvir-list/2015-March/msg00415.html
The memory sizes in qemu are aligned up to 1 MiB boundaries. There are
two places where this was done once for the total size and then for
individual NUMA cell sizes.
Add a function that will align the sizes in one place so that it's clear
where the sizes are aligned.
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
Surprisingly we did not grab a VM job when a block job finished and we'd
happily rewrite the backing chain data. This made it possible to crash
libvirt when queueing two backing chains tightly and other badness.
To fix it, add yet another handler to the helper thread that handles
monitor events that require a job.
We interpret port values as signed int (convert them from char *),
so if a negative value is provided in network disk's configuration,
we accept it as valid, however there's an 'unknown cause' error raised later.
This error is only accidental because we return the port value in the return code.
This patch adds just a minor tweak to the already existing check so we
reject negative values the same way as we reject non-numerical strings.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1163553
A helper that never returns an error and treats bits out of bitmap range
as false.
Use it everywhere we use ignore_value on virBitmapGetBit, or loop over
the bitmap size.
Now that qemuDomainBlocksStatsGather provides functions of both
qemuMonitorGetBlockStatsParamsNumber and qemuMonitorGetBlockStatsInfo we
can reuse it and kill a lot of code.
Additionally as a bonus qemuDomainBlockStatsFlags will now support
summary statistics so add a statement to the virsh man page about that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1142636
In the LXC driver, if the disk path is not provided the API returns
total statistics for all disks of the domain. With the new text monitor
implementation this can be now done in the qemu driver too.
Add code that wil total the stats for all disks if the path is not
provided.
Extract the code to look up the disk alias and return the block stats
struct so that it can be reused later in qemuDomainBlockStatsFlags.
The function uses qemuMonitorGetAllBlockStatsInfo instead of
qemuMonitorGetBlockStatsInfo.
Our virDomainBlockStatsFlags API uses the old approach where, when it's
called without the typed parameter array, returns the count of parameters
supported by qemu.
The supported parameter count is obtained via separate monitor calls
which is a waste since we can calculate it when gathering the data.
This patch adds code to the qemuMonitorGetAllBlockStatsInfo workers that
allows to track the count of supported fields reported by qemu and will
allow to remove the old duplicate code.
The function that is extracting block stats data from the QMP monitor
reply contains a lot of repeated code. Since I'd be changing each of the
copies in the next patch, lets convert it to a macro right away.
Add a different version of parser for "info blockstats" that basically
parses the same information as the existing copy of the function.
This will allow us to remove the single device version
qemuMonitorGetBlockStatsInfo in the future.
The new implementation uses few new helpers so it should be more
understandable and provides a test case to verify that it works.
Allocate the hash table in the monitor wrapper function instead of the
worker itself so that the text monitor impl that will be added in the
next patch doesn't have to duplicate it.
Error messages are already set in all code paths returning -1 from
networkGetNetworkAddress, so we don't want to overwrite them.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
When creating qemu capabilities, a dummy virDomainObj is created just
because our monitor code expects that. However, the object is created
locked already. Then, under cleanup label, we simply unref the object
which results in whole domain object to be disposed. The object lock
is destroyed subsequently, but hey - it's still locked:
==24845== Thread #14's call to pthread_mutex_destroy failed
==24845== with error code 16 (EBUSY: Device or resource busy)
==24845== at 0x4C3024E: pthread_mutex_destroy (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==24845== by 0x531F72E: virMutexDestroy (virthread.c:83)
==24845== by 0x5302977: virObjectLockableDispose (virobject.c:237)
==24845== by 0x5302A89: virObjectUnref (virobject.c:265)
==24845== by 0x1DD37866: virQEMUCapsInitQMP (qemu_capabilities.c:3397)
==24845== by 0x1DD37CC6: virQEMUCapsNewForBinary (qemu_capabilities.c:3481)
==24845== by 0x1DD381E2: virQEMUCapsCacheLookup (qemu_capabilities.c:3609)
==24845== by 0x1DD30F8A: virQEMUCapsInitGuest (qemu_capabilities.c:744)
==24845== by 0x1DD31889: virQEMUCapsInit (qemu_capabilities.c:1020)
==24845== by 0x1DD7DD36: virQEMUDriverCreateCapabilities (qemu_conf.c:888)
==24845== by 0x1DDC57C0: qemuStateInitialize (qemu_driver.c:803)
==24845== by 0x53DC743: virStateInitialize (libvirt.c:777)
==24845==
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 4bbe1029f fixed a problem in commit f7afeddc by moving the call
to virNetDevGetIndex() to a location common to all interface types (so
that the nicindex array would be filled in for macvtap as well as tap
interfaces), but the location was *too* common, as the original call
to virNetDevGetIndex() had been in a section qualified by "if
(cfg->privileged)". The result was that the "fixed" libvirtd would try
to call virNetDevGetIndex() even for session mode libvirtd, and end up
failing with the log message:
Unable to open control socket: Operation not permitted
To remedy that, this patch qualifies the call to virNetDevGetIndex()
in its new location with cfg->privileged.
This resolves https://bugzilla.redhat.com/show_bug.cgi?id=1198244
By adding a call and check of return of virBitmapToData to the
IOThreads code, my Coverity checker lets me know qemuDomainHelperGetVcpus
also needs to check the status...
