To prevent regressions when refactoring tests and accidentally forgotten
input files make sure that qemuxml2argvtest is invoked for all input
files in tests/qemuxml2argvdata
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than completely compiling out the tests mark them as skipped.
This will allow us to add a checker that all input files are accounted
for.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the rest of test cases which were tested only by qemuxml2xmltest.
All test cases added here have a '<interface type="network"' which needs
to be translated using the new fake network driver.
Note that this captures the status quo of the tests. No care was given
whether the tests make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the data from 'nat-network' network definition to enable the test
case also for xml2argvtest.
Since the network listen bit doesn't need any plug definition just use
an empty string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to be able to use '<interface type="network"' we need a fake
network driver in qemuxml2argvtest. Create one by simply allowing users
to reuse configs from tests/networkxml2xmlin and tests/virnetworkportxml2xmldata
which will be returned to corresponding functions.
The driver implements:
.networkLookupByName = fakeNetworkLookupByName,
- validate syntax of network name, check if config exists
.networkGetXMLDesc = fakeNetworkGetXMLDesc,
- return appropriate XML
.networkPortCreateXML = fakeNetworkPortCreateXML,
- validate that port XML exists
.networkPortGetXMLDesc = fakeNetworkPortGetXMLDesc,
- return appropriate port XML
With the above and the correspondign test data, all network XMLs can be
enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modify the test case so that it can be used also for qemuxml2argvtest
by removing invalid configuration (interface type='user' + queues),
clean up unneeded disks and rename it accordingly. Also test the
ioeventfd.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Test both linkstates in an explicit test case. Note that link state is
setup via monitor, thus not visible on the commandline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There were plenty of test cases invoked only from qemuxml2xmltest but
not from qemuxml2argvtest, either by accident or it was deemed unneeded.
Bulk-add all test cases which fit the above description which don't
require faking the network driver. Use same invocation as present in
qemuxml2xmltest.
Arguably in certain cases we could move the test case to
genericxml2xmltest, but this covers the cases when that would not be
appropriate.
Tests requiring the network driver will be bulk-added when the fake
network driver will be implemented.
This patch also allows the use of FLAG_SKIP_CONFIG_ACTIVE in
qemuxml2argvtest although the flag will be dormant for now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prevent duplicated invocation of tests by tracking use of output files.
Some cases need to be exempt from this for now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'parallel-tcp-chardev', 'parallel-parport-chardev' are invoked twice
with exactly the same parameters, remove the duplicity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The case was removed in commit 8ff73d22c7
which modernized the cases without an explicit reason. Reinstate it.
Fixes: 8ff73d22c7
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test case was introduced by commit 68599168ea
but is only used in the qemunbdkittest. Fix it and make use of it also
in qemuxml2argvtest.
Fixes: 68599168ea
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The tests invocations were accidentaly removed in commit
54257ed51b
Fixes: 54257ed51b
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently when we build with nbdkit support, libvirt will always try to
use nbdkit to access remote disk sources when it is available. But
without an up-to-date selinux policy allowing this, it will fail.
because the required selinux policies are not yet widely available, we
have disabled nbdkit support on rpm builds for all distributions before
Fedora 40.
Unfortunately, this makes it more difficult to test nbdkit support.
After someone updates to the necessary selinux policies, they would also
need to rebuild libvirt to enable nbdkit support. By introducing a
configure option (nbdkit_config_default), we can build packages with
nbdkit support but have it disabled by default.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This is mostly straightforward, except for a teensy-weensy
detail: usually, there's no system wide daemon running, no system
wide available socket that anybody could connect to. PipeWire
uses a per user daemon approach instead. But this in turn means,
that the socket location floats between various locations and is
derived from various environment variables (just like the actual
socket name) and thus we must pass the variables to QEMU.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/560
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming test bump will cause some changes thus preserve the existing
state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
CPU host model expansion depends on the CPU data from the capabilities
and can change based on emulation type. Add complementary tests to the
ones we already have to ensure full coverage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cpu-host-model.xml test case uses 'kvm' whereas the
fallback/nofallback cases use tcg in the definition. Rename them
accordingly so that the complement cases can be added later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test cases that depend on duplicating fds are using fairly big
values as targets.
This works fine on Linux, where RLIMIT_NOFILE is 1024 by
default, but fails on macOS which uses 256 as the default.
Decrease the values so that they're valid across all platforms.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Convert all places in tests to use the 'storage' layer nodename
accessors instead of (virStorageSource)->nodestorage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As of v9.4.0-rc2~5 it is possible to specify guest address where
a virtio-mem/virtio-pmem memory device is mapped to. What that
commit forgot to introduce was a check for overlaps.
And yes, this is technically an O(n^2) algorithm, as
virDomainMemoryDefValidate() is called over each memory device
and after this, virDomainMemoryDefValidate() also iterates over
each memory device. But given there's usually only a handful of
such devices, and this runs only when parsing domain XML I guess
code readability wins over some less obvious solution.
Resolves: https://issues.redhat.com/browse/RHEL-4452
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For ssh disks that are served by nbdkit, lookup the password from the
configured secret and securely pass it to the nbdkit process using fd
passing.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Adds the ability to monitor the nbdkit process so that we can take
action in case the child exits unexpectedly.
When the nbdkit process exits, we pause the vm, restart nbdkit, and then
resume the vm. This allows the vm to continue working in the event of a
nbdkit failure.
Eventually we may want to generalize this functionality since we may
need something similar for e.g. qemu-storage-daemon, etc.
The process is monitored with the pidfd_open() syscall if it exists
(since linux 5.3). Otherwise it resorts to checking whether the process
is alive once a second. The one-second time period was chosen somewhat
arbitrarily.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For virStorageSource objects that contain an nbdkitProcess, start that
nbdkit process to serve that network drive and then pass the nbdkit
socket to qemu rather than sending the network url to qemu directly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add new DO_TEST_CAPS_LATEST_NBDKIT macro to test xml2argv for various
nbdkit capability scenarios.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There was support in the code for parsing protocol='ssh' on network disk
sources, but it was not present in the xml schema. Add this to the
schema.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since commit 54257ed51b on S390x qemuxml2argvtest fails with the following errors:
144) QEMU XML-2-ARGV cpu-kvmclock.x86_64-latest ... libvirt: CPU Driver error : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
FAILED
2023-09-14 13:01:23.883+0000: 4113077: info : libvirt version: 9.8.0
2023-09-14 13:01:23.883+0000: 4113077: info : hostname: a46lp61.lnxne.boe
2023-09-14 13:01:23.883+0000: 4113077: error : virCPUx86Compare:1954 : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
1059) QEMU XML-2-ARGV cpu-check-partial.x86_64-latest ... libvirt: CPU Driver error : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
FAILED
2023-09-14 13:01:23.885+0000: 4113077: error : virCPUx86Compare:1954 : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
1064) QEMU XML-2-ARGV cpu-check-default-partial2.x86_64-latest ... libvirt: CPU Driver error : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
FAILED
2023-09-14 13:01:23.885+0000: 4113077: error : virCPUx86Compare:1954 : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
3 tests failed.
Fixes: 54257ed51b
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Requires recent qemu with support for the virtio-blk-vhost-vdpa device
and the ability to pass a /dev/fdset/N path for the vdpa path (8.1.0)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1900770
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that all fake-caps testing was removed we can also remove the
filling of the fake caps by cpu models.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The rest of the test cases has no change in the output now that we've
assumed some flags.
Remove the fake-caps test macros after conversion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real capabilities, but select the fake 'Haswell' host CPU for test
stability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously without modern capabilities the test was relying on a CPU
model which was not entered into a fake list of supported cpus.
With real capabilities we have to pick a CPU model which is supported by
libvirt but in some version is not supported by qemu. I've picked
EPYC-Milan, which was introduced into qemu-6.0.
This test configures a CPU which is equivalent to EPYC-Rome by disabling
features from EPYC-Milan and uses a versioned real caps test to check it
against a qemu which doesn't support EPYC-Milan.
With real capabilities though, we can also do a positive test case by
using a version whic doesh support it. I've specifically not used the
LATEST caps so that it doesn't change once capabilities are bumped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the fake Haswell processor definition and augment the list of
features to make the test pass.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real capabilities, but select the fake 'Haswell' host CPU for test
stability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modernize all test cases which set 'Haswell' as the host cpu model.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modernize test cases using 'host-mode' cpu type, where the actual CPU
doesn't isn't important.
As using the host cpu from the 'latest' capabilities data would cause
test churn in case the host cpu changes in the future, convert them
using the overriden Haswell cpu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the 'smp-dies' test case into 'cpu-topology4' and remove
unnecessary cruft.
Remove cpu definition from 'cpu-topology2' as it's not relevant to the
test case.
Remove 'smp' case as it's covered by the rest.
Use real capabilities for all of them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As these were using DO_TEST_FULL the churn-reducing patches didn't
influence these.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since qemu-8.0 a new way to disable 'hpet' via -machine was added.
Properly test both branches with real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume the features modern qemus have to bring the test data closer
to the 'latest' real-caps versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume the two features modern qemus have to bring the test data closer
to the 'latest' real-caps versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume the two features modern qemus have to bring the test data closer
to the 'latest' real-caps versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume the support for the 'pcie-root-port' all modern qemus have to
bring the test data closer to the 'latest' real-caps versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To minimize further churn when coverting to real capabilities, assume
that all fake-caps machines support the piix3 USB controller.
Since we already have solid testing of USB controllers, this will have
effect only in cases when it's not relevant to the test itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename the 'usb-controller-explicit-(unavailable-)q35' test case to
'usb-controller-nec-xhci'. Since this also covers what
'usb-controller-xhci' was testing the latter is removed.
Other 'usb-xhci' test cases which were using the NEC controller are also
renamed to contain the name.
In case of 'usb-controller-qemu-xhci' the negative test case is deleted
as we don't need two cases for missing explicitly specified controller
and the positive case is modernized to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Improve testing of an explicitly requested USB controller without a
model being provided.
For this purpose the 'usb-controller' case is renamed to
'usb-controller-default-i440fx'; 'usb-controller-default-q35' is moved
up to form a group. In both cases tests are covnerted to use
DO_TEST_CAPS_LATEST.
A new 'usb-controller-default-isapc' negative test case is added for
symmetry.
The negative test case 'usb-controller-default-unavailable-q35' is
converted to use latest caps, but stripping the default controller
instead of using fake caps. Additionally for symmetry
'usb-controller-default-unavailable-i440fx' is added although that
doesn't cause failure, but rather a graceful downgrade to use '-usb'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are per-machine type variations on which usb controller will be
picked on an x86_64 machine. Add test cases where a USB controller is
completely missing to cover all 3 cases ('isapc', 'pc', 'q35') when an
USB controller is not explicitly requested by the user.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move all controller related tests together and consolidate naming of the
test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to minimize further churn, make all fake-caps test assume that
the seccomp sandbox is supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'numatune-memory' case is completely dropped as it's sufficiently
covered by 'numatune-memnode'.
The positive fake-caps version of 'numatune-memnode' is dropped as it's
covered by the two existing real caps invocations.
'numatune-memory-invalid-nodeset', 'numatune-memnode-invalid-mode',
'numatune-memnode-nocpu', 'numatune-memnodes-problematic' parsing error
negative cases are converted to use latest capabilities.
'numatune-static-nodeset-exceed-hostnode' commandline generation failure
negative case is converted to use latest capabilities.
'numatune-memnode-no-memory', 'numatune-distances',
'numatune-auto-nodeset-invalid', 'numatune-auto-prefer' positive cases
are converted to use latest capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
