Commit Graph

105 Commits

Author SHA1 Message Date
Jiri Denemark
efa3baeae7 virsh: Add support for VIR_MIGRATE_ZEROCOPY flag
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-06-23 16:45:39 +02:00
Daniel P. Berrangé
8603b3d76c tools: add '--xpath EXPRESSION --wrap' args to all dumpxml commands
While you can chain the virsh output up to a later 'xmllint' or 'xpath'
command, integrating it into virsh avoids needs for installing extra
binaries which we've often found to be missing on production installs
of libvirt. It also gives better response if the initial virsh command
hits an error, as you don't get an aborted pipeline.

    $ virsh pool-dumpxml --xpath //permissions default
    <permissions>
      <mode>0711</mode>
      <owner>1000</owner>
      <group>1000</group>
      <label>unconfined_u:object_r:svirt_home_t:s0</label>
    </permissions>

If multiple nodes match, they are emitted individually:

    $ virsh dumpxml --xpath '//devices/*/address[@type="pci"]' --wrap demo
    <address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/>
    <address type="pci" domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>
    ...snip...
    <address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0" multifunction="on"/>
    <address type="pci" domain="0x0000" bus="0x07" slot="0x00" function="0x0"/>

but if intending to post-process the output further, the results
can be wrapped in a parent node

    $ virsh dumpxml --xpath '//devices/*/address[@type="pci"]' --wrap demo
    <nodes>
      <address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/>
      <address type="pci" domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>
      ...snip...
      <address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0" multifunction="on"/>
      <address type="pci" domain="0x0000" bus="0x07" slot="0x00" function="0x0"/>
    </nodes>

Fixes https://gitlab.com/libvirt/libvirt/-/issues/244
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2022-06-20 10:40:45 +01:00
Michal Privoznik
7162cee68a virsh: Wire up new virDomainSetIOThreadParams parameters
Since virsh implements a wrapper over virDomainSetIOThreadParams()
(command iothreadset) let's wire up new typed parameters there too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2022-06-10 14:00:59 +02:00
Jiri Denemark
ce34977c1f virsh: Add --postcopy option for domjobabort command
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2022-06-07 17:40:21 +02:00
Jiri Denemark
6280246971 virsh: Add --postcopy-resume option for migrate command
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2022-06-07 17:40:20 +02:00
Peter Krempa
dff53731ec docs: formatdomain: Remove 'elementsDevices' anchor
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-06-01 12:27:09 +02:00
Peter Krempa
456a710290 docs: formatdomain: Remove 'elementsCPU' anchor
Reworded documentation around the local link.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-06-01 12:27:09 +02:00
Peter Krempa
69ee066523 virsh: cmdBlockcopy: Add '--print-xml' flag
Useful for knowing how to construct the XML and debugging.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-04-25 16:37:05 +02:00
Peter Krempa
2a8946ca7e docs: Convert 'formatnetwork' page to rst
Additionally hyperlinks in other parts of the documentation are updated
to match.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-04-19 16:19:48 +02:00
Peter Krempa
67263604e6 docs: man: Add description of 'calc_mode' and 'vcpu.<num>.megabytes_per_second' dirtyrate mode
Commit 42d36b65a3 added new fields to the API docs but didn't add the
virsh man page equivalent.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2073867
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-04-13 13:00:22 +02:00
Nikolay Shirokovskiy
4fba5770d2 tools: support --remove-logs flag on destroing domain
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-04-06 10:48:04 +03:00
Michal Privoznik
5e9d8f094c virsh: Remove any reference of KVM device assignment
The KVM device assignment was removed in v5.7.0-rc1~103 but virsh
and its manpage still mention it. Don't do that.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2022-04-06 09:40:13 +02:00
Peter Krempa
43edde82af virsh: Implement support for virDomainQemuMonitorCommandWithFiles
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-01 13:29:49 +01:00
Hyman Huang(黄勇)
72e60ddf1b virsh: Add mode option to domdirtyrate-calc virsh api
Extend domdirtyrate-calc virsh api with mode option, either
of these three options "page-sampling,dirty-bitmap,dirty-ring"
can be specified when calculating dirty page rate.

Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-02-21 13:34:16 +01:00
Daniel P. Berrangé
7904e521b2 tools: add --reset-nvram arg to several virsh commands
This wires up support for resetting NVRAM for all APIs that allow
this feature.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2022-02-08 13:04:20 +00:00
Peter Krempa
755b16d10a docs: man: virsh: Document more carefully that 'guestinfo' can return nothing
When invoking 'virsh guestinfo $VM' without explicitly specifying a
group of information to return, virsh always reports success even when
the guest agent doesn't report any information in the current state.
This is desired in situations when you are okay with stats being missing
and avoids spurious errors being reported.

Clarify that this is really desired in the man page.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2041665
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2022-01-19 19:01:32 +01:00
Jim Fehlig
3fc65ae9e2 tools: Add domsetlaunchsecstate virsh command
After attesting a domain with the help of domlaunchsecinfo,
domsetlaunchsecstate can be used to set a secret in the guest
domain's memory prior to running the vcpus.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2022-01-04 10:56:00 -07:00
Michal Privoznik
06f405c627 qemu: Explicitly forbid live changing nodeset for strict numatune
Let's imagine a guest that's configured with strict numatune:

  <numatune>
    <memory mode='strict' nodeset='0'/>
  </numatune>

For guests with NUMA:
Depending on machine type used (see commit v6.4.0-rc1~75) we
generate either:

  1) -object '{"qom-type":"memory-backend-ram","id":"ram-node0",\
               "size":20971520,"host-nodes":[0],"policy":"preferred"}' \
     -numa node,nodeid=0,cpus=0,memdev=ram-node0

or

  2) -numa node,nodeid=0,cpus=0,mem=20480

Later, when QEMU boots up and cpuset CGroup controller is
available we further restrict QEMU there too. But there's a
behaviour difference hidden: while in case 1) QEMU is restricted
from beginning, in case 2) it is not and thus it may happen that
it will allocate memory from different NUMA node and even though
CGroup will try to migrate it, it may fail to do so (e.g. because
memory is locked). Therefore, one can argue that case 2) is
broken. NB, case 2) is exactly what mode 'restrictive' is for.
However, in case 1) we are unable to update QEMU with new
host-nodes, simply because it's lacking a command to do so.

For guests without NUMA:
It's very close to case 2) from above. We have commit
v7.10.0-rc1~163 that prevents us from outputting host-nodes when
generating memory-backend-* for system memory, but that simply
allows QEMU to allocate memory anywhere and then relies on
CGroups to move it to desired location.

Due to all of this, there is no reliable way to change nodeset
for mode 'strict'. Let's forbid it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-12-17 13:21:48 +01:00
Michal Privoznik
a19b93d4e0 qemu: Allow VIR_DOMAIN_NUMATUNE_MEM_RESTRICTIVE in qemuDomainSetNumaParamsLive()
The whole idea of VIR_DOMAIN_NUMATUNE_MEM_RESTRICTIVE is that the
memory location is restricted only via CGroups and thus can be
changed on the fly (which is exactly what
qemuDomainSetNumaParamsLive() does. Allow this mode there then.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-12-17 13:18:54 +01:00
Michal Privoznik
d05a89b703 manpages: Document 'restrictive' mode for numatune
While we document possibility of passing an integer from
virDomainNumatuneMemMode enum, we list string variants to only
the first three enum members. The fourth (and so far the last)
member is called 'restrictive' and thus should be documented.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-12-17 12:50:05 +01:00
Tim Wiederhake
fdec0cbf43 Fix some typos
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-12-15 11:52:54 +01:00
Daniel P. Berrangé
719bb0bf23 tools: add 'nodesevinfo' virsh command
While some SEV info is reported in the domain capabilities,
for reasons of size, this excludes the certificates. The
nodesevinfo command provides the full set of information.

Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-12-14 16:04:17 +00:00
Daniel P. Berrangé
ac79e9ff5c tools: add 'domlaunchsecinfo' virsh command
This command reports the launch security parameters for
a guest, allowing an external tool to perform a launch
attestation.

Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-12-14 16:04:17 +00:00
Peter Krempa
51d1c08fe9 virDomainMigrate: Introduce VIR_MIGRATE_NON_SHARED_SYNCHRONOUS_WRITES flag
Non-shared storage migration of guests which are disk I/O intensive and
have fast local storage may actually never converge if the guest happens
to dirty the disk faster than it can be copied.

This patch introduces a new flag
'VIR_MIGRATE_NON_SHARED_SYNCHRONOUS_WRITES' which will instruct
hypervisors to synchronize local I/O writes with the writes to remote
storage used for migration so that the guest can't overwhelm the
migration. This comes at a cost of decreased local I/O performance for
guests which behave well on average.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-07 09:00:39 +01:00
Peter Krempa
d43513e383 man: virsh: Separate paragraphs describing distinct flags
Separate the paragraphs where the topic changes to simplify further
additions.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-07 09:00:39 +01:00
Peter Krempa
b54c313c33 virDomainBlockCopy: Introduce VIR_DOMAIN_BLOCK_COPY_SYNCHRONOUS_WRITES flag
In cases when the destination storage is slower than the normal VM
storage and the VM does intensive I/O to the disk a block copy job may
never converge.

Switching it to synchronous mode will ensure that all writes done by the
guest are propagated to the destination at the cost of slowing down I/O
of the guest to the synchronous speed.

This patch adds the new API flag and implements virsh support.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-07 09:00:39 +01:00
Pavel Hrdina
2fe7622d19 virsh: man: update snapshot-revert description
We've changed the behavior of this API that from now on it will always
restart the VM process and we are no longer able to revert to snapshots
created by libvirt older then 0.9.5.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-11-23 16:03:19 +01:00
zhanglei
c6d009620a virsh: add interface information to guestinfo command
The new parameter group returns information about network interfaces

Signed-off-by: zhanglei <zhanglei@smartx.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-11-05 13:38:40 +01:00
Jonathon Jongsma
8970094afd docs: fix documentation for nodedev-start
Presumably the result of a copy/paste mistake, the the argument for the
`nodedev-start` command was described as a 'network' rather than a
'device'.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-11-03 14:07:32 -05:00
Peter Krempa
289aa4bc5b virsh: Add QMP command wrapping for 'qemu-monitor-command'
Issuing simple QMP commands is pain as they need to be wrapped by the
JSON wrapper:

 { "execute": "COMMAND" }

and optionally also:

 { "execute": "COMMAND", "arguments":...}

For simple commands without arguments we can add syntax sugar to virsh
which allows simple usage of QMP and additionally prepares also for
passing through of the 'arguments' section:

 virsh qemu-monitor-command $VM query-status

is equivalent to

 virsh qemu-monitor-command $VM '{"execute":"query-status"}'

and

 virsh qemu-monitor-command $VM query-named-block-nodes '{"flat":true}'
 or
 virsh qemu-monitor-command $VM query-named-block-nodes '"flat":true'

is equivalent to

 virsh qemu-monitor-command $VM '{"execute":"query-named-block-nodes", "arguments":{"flat":true}}'

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-10-18 16:04:17 +02:00
Michal Privoznik
f72e4edf50 virsh: Introduce update-memory-device command
New 'update-memory-device' command is introduced which aims on
making it user friendly to change <memory/> device. So far I just
need to change <requested/> so I'm introducing --requested-size
only; but the idea is that this is extensible for other cases
too. For instance, want to change <myElement/>? A new
--my-element argument can be easily introduced.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-10-01 11:05:05 +02:00
Jonathon Jongsma
70801504ca docs: Expand manpage documentation for nodedev commands
Bring the documentation for nodedev-list up to date with the latest
code, especially documenting the --active and -all options.

Also add documentation for the nodedev-define, nodedev-undefine, and
nodedev-start commands.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-16 09:51:03 -05:00
Kristina Hanicova
4d31c02f05 virsh: add support for '--validate' option in create network
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-16 16:26:18 +02:00
Jonathon Jongsma
0cb4550305 virsh: add nodedev-info
This is currently the only way to view the 'autostart' property for a
node device in virsh.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2021-09-14 14:25:56 -05:00
Jonathon Jongsma
16d078eded virsh: add nodedev-autostart
Add ability to set node devices to autostart on boot or parent device
availability.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2021-09-14 14:24:07 -05:00
Kristina Hanicova
8f8eeb3750 virsh: add support for '--validate' option in create nwfilter-binding
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-09-06 17:08:59 +02:00
Kristina Hanicova
6779fca41c virsh: add support for '--validate' option in create network port
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-09-06 17:08:59 +02:00
Kristina Hanicova
5ca09c6b27 virsh: add support for '--validate' option in define storage pool
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-08-25 09:57:58 +02:00
Kristina Hanicova
7e7747cc2d virsh: add support for '--validate' option in define network
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-08-24 15:47:03 +02:00
Kristina Hanicova
ec5561c0bb virsh: add support for '--validate' option in define secret
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-08-20 15:41:22 +02:00
Kristina Hanicova
d46a0b0e96 virsh: add support for '--validate' option in define interface
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-08-20 15:41:22 +02:00
Kristina Hanicova
a3d88c9d4c virsh: add support for '--validate' option in define nwfilter
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-08-20 15:38:53 +02:00
Michal Privoznik
868bacd380 virsh: Support vhostuser in attach-interface
Recently, I wanted to attach an vhost-user interface but found
out that attach-interface command doesn't support it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-18 14:21:40 +02:00
Peter Krempa
a52a201c22 virsh: Un-document 'virsh echo'
Note that it's for internal testing use and remove the manpage entry.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-08-18 11:07:25 +02:00
Yang Fei
f513297bd4 qemu: Introduce qemuDomainGetStatsCpuHaltPollTime
This function add halt polling time interface in domstats. So that
we can use command 'virsh domstats VM' to get the data if system
support.

Signed-off-by: Yang Fei <yangfei85@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-07-27 10:29:25 +02:00
Michal Privoznik
3de70da32d virsh: Expose new win-dmp dump format
In previous commit the virDomainCoreDumpWithFormat() API gained
new format. Expose it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-05-20 16:24:06 +02:00
Peter Krempa
f1c9fed2ca virsh: snapshot: Don't validate schema of XML generated by 'virsh snapshot-create-as'
Commit 95f8e3237e which introduced XML schema validation
for snapshot XMLs always asserted the validation for the XML generated
by 'virsh snapshot-create-as' on the basis that it's libvirt-generated,
thus valid.

This unfortunately isn't true as users can influence certain bits of the
XML such as the disk image path which must be a full path. Thus if a
user tries to invoke virsh as:

 $ virsh snapshot-create-as upstream --diskspec vda,file=relative.qcow2
 error: XML document failed to validate against schema: Unable to validate doc against /path/to/domainsnapshot.rng
 Extra element disks in interleave
 Element domainsnapshot failed to validate content

They get a rather useless error from the libxml2 RNG validator.

With this fix applied, we get to the XML parser in libvirtd which has a
more reasonable error:

 $ virsh snapshot-create-as upstream --diskspec vda,file=relative.qcow2
 error: XML error: disk snapshot image path 'relative.qcow2' must be absolute

Instead users can force validation of the XML generated by 'virsh
snapshot-create-as' by passing the '--validate' flag.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-04-16 17:27:39 +02:00
Michal Privoznik
3bf8dfd56f qemu: Expose disk serial in virDomainGetGuestInfo()
When querying guest info via virDomainGetGuestInfo() the
'guest-get-disks' agent command is called. It may report disk
serial number which we parse, but never report nor use for
anything else.

As it turns out, it may help management application find matching
disk in their internals.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-By: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-04-14 13:56:09 +02:00
Hao Wang
5be6decbb1 migration/dirtyrate: Introduce command 'virsh domstats --dirtyrate'
Introduce command 'virsh domstats --dirtyrate' for reporting memory
dirty rate information. The info is listed as:

Domain: 'vm0'
  dirtyrate.calc_status=2
  dirtyrate.calc_start_time=1534523
  dirtyrate.calc_period=1
  dirtyrate.megabytes_per_second=5

Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-18 08:50:25 +01:00
Hao Wang
a2ae2dad06 migration/dirtyrate: Introduce domdirtyrate-calc virsh api
Introduce domdirtyrate-calc virsh api to start calculating domain's
memory dirty rate:
	# virsh domdirtyrate-calc <domain> [--seconds <sec>]

Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-18 08:50:25 +01:00