Commit Graph

43 Commits

Author SHA1 Message Date
Michal Privoznik
b3a67644c3 nodedevmdevctltest: Fix two memleaks
There are two memleaks inside of nodedevmdevctltest:

1) In the testCommandDryRunCallback() - when appending lines to
   stdinbuf the pointer is overwritten without freeing the old
   memory it pointed to.

2) In testMdevctlModify() the livecmd variable is reused and
   since its marked as g_autoptr() the first use leaks.

Fixes: 582f27ff15
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2024-02-26 14:35:52 +01:00
Boris Fiuczynski
582f27ff15 nodedev: Implement virNodeDeviceUpdate
Implement the API functions in the node device driver by using mdevctl
modify with the options defined and live.
Instead of increasing the minimum mdevctl version to 1.3.0 in the spec
file to ensure support exists in mdevctl the support is dynamically
checked before using mdevctl.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2024-02-26 11:09:57 +01:00
Boris Fiuczynski
e67bca23e4 nodedev: add an active config to mdev
The configuration of a defined mdev can be modified after the mdev is
started. The defined configuration and the active configuration can
therefore run out of sync. Handle this by storing the modifiable data
which is the mdev type and attributes in two separate active and
defined configurations. mdevctl supports with callout scripts to do an
attribute retrieval of started mdevs which is already implemented in
libvirt.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2024-02-26 10:59:47 +01:00
Michal Privoznik
a3f0c3852e nodedevmdevctltest: Introduce a test case for empty mdevctl output
As explained earlier, 'mdevctl' can output nothing. Add a test
case to nodedevmdevctltest which covers this situation.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
2023-08-24 13:46:22 +02:00
Michal Privoznik
857efc74fe nodedevmdevctltest: Rename mdevctl-list-empty test case
The mdevctl-list-empty test case is there to test whether an
empty JSON array "[]" is handled correctly by mdevctl handling
code. Well, mdevctl can output both, an empty JSON array or no
output at all.

Therefore, rename "mdevctl-list-empty" test case to
"mdevctl-list-empty-array" which is more descriptive and also
frees up slot for actual empty output (handled in next commits).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
2023-08-24 13:45:06 +02:00
Peter Krempa
0268270b0f conf: node_device: Add 'validate' argument to virNodeDeviceDefParse
Allow callers to request XML validation against the schema. All callers
for now pass 'false'.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2022-11-01 13:07:20 +01:00
Peter Krempa
37de09a2f9 conf: nodedev: Provide only virNodeDeviceDefParse
Replace the thin wrappers virNodeDeviceDefParseString/File by directly
calling the main parser.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-10-06 10:54:25 +02:00
Peng Liang
48e8c36b05 tests: Remove unused includes
Signed-off-by: Peng Liang <tcx4c70@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-06-16 06:43:58 +02:00
Boris Fiuczynski
609836e2b2 tests: adding vfio-ccw to nodedev tests
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-02-04 17:50:53 +01:00
Jonathon Jongsma
592031a580 nodedev: Add tests for mdevctl autostart command
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2021-09-14 14:24:07 -05:00
Jonathon Jongsma
08d29eb3b1 nodedev: add PostParse callback for nodedev parsing
This can be used similarly to other postparse callbacks in libvirt --
filling in additional information that can be determined by using the
information provided in the XML. In this case, we determine the address
of the parent device and cache it in the mdev caps so that we can use it
for generating a unique name and interacting with mdevctl.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-08-06 15:02:36 -05:00
Jonathon Jongsma
d5ae634ba2 nodedev: Add parser validation for node devices
At the moment, this is only for mediated devices. When a new mediated
device is created or defined, the xml is expected specify the nodedev
name of an existing device as its parent. We were not previously
validating this and were simply accepting any string here.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-08-06 15:02:32 -05:00
Jonathon Jongsma
a9c1febcf4 nodedev: fix xml output for mdev parents in test suite
Commit 51fbbfdce8 attempted to get the proper nodedev name for the
parent of an defined mdev by traversing the filesystem and looking for a
device that had the appropriate sysfs path.  This works, but it would be
cleaner to to avoid mucking around in the filesystem and instead just
just examine the list of devices we have in memory.

We already had a function nodeDeviceFindAddressByName() which constructs
an address for parent device in a format that can be used with mdevctl.
So if we refactor this function into a a function that simply formats an
address for an arbitrary virNodeDeviceObj*, then we can use this
function as a predicate for our new virNodeDeviceObjListFind() function
from the previous commit. This will search our list of devices for one
whose address matches the address we get from mdevctl.

One nice benefit of this approach is that our test cases will now
display xml output with the proper parent name for mdevs (assuming that
we've added the appropriate mock parent devices to the test driver).
Previously they just displayed 'computer' for the parent because the
alternative would have required specially constructing a mock filesystem
environment with a sysfs that mapped to the appropriate parent.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-08-06 15:02:23 -05:00
Boris Fiuczynski
19b088cfb9 nodedev: fix internal error when no defined mdevs exist
Commit e9b534905f introduced an error when parsing an empty list
returned from mdevctl.

This occurs e.g. if nodedev-undefine is used to undefine the last
defined mdev which causes the following error messages

 libvirtd[33143]: internal error: Unexpected format for mdevctl response
 libvirtd[33143]: internal error: failed to query mdevs from mdevctl:
 libvirtd[33143]: mdevctl failed to updated mediated devices

Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-07-22 10:53:44 -05:00
Jonathon Jongsma
8e98c90f90 tests: nodedev: remove unnecessary cleanup label
Now that the last cleanup task was removed in the previous commit, just
remove the label and return early on error rather than goto cleanup.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-19 10:24:13 -05:00
Jonathon Jongsma
65b109f7e6 tests: nodedev: remove unused variable
This variable was leftover from previous changes but is no longer used.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-19 10:24:13 -05:00
Jonathon Jongsma
3bbfbceb0f tests: nodedev: remove virt type from test macros
We only use the virt_type "QEMU" in this tests, so simply hard-code it
in the test function rather than specifying it in the test macro.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-19 10:24:13 -05:00
Jonathon Jongsma
7dd31c4938 tests: nodedev: remove 'create' from test macros
We can figure out the appropriate value for 'create' from the command
type, so push that into the test function rather than specifying it in
the test macro.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-19 10:24:13 -05:00
Erik Skultety
226e09bf7c tests: nodedev: Make the mdevctl test function and helper generic
Now that we have a generic mdevctl command generator, we can unify the
test infrastructure as well.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2021-04-19 10:24:13 -05:00
Jonathon Jongsma
073862febe nodedev: Remove GetMdevctl*Command() wrappers
These per-command generator functions were only exposed in the header to
allow the commandline generation to be tested. Now that we have a
generic mdevctl command generator, we can get rid of the per-command
wrappers and reduce the noise in the header.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2021-04-19 10:24:13 -05:00
Erik Skultety
87b31fe8a2 nodedev: driver: Create a generic mdevctl command translator
Currently there are dedicated wrappers to construct mdevctl command.
These are mostly fine except for the one that translates both "start"
and "define" commands, only because mdevctl takes the same set of
arguments. Instead, keep the wrappers, but let them call a single
global translator that handles all the mdevctl command differences and
commonalities.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2021-04-19 10:24:13 -05:00
Erik Skultety
92fdc1f0cb nodedev: driver: Introduce internal mdevctl commands enum
This is not a 1:1 mapping to mdevctl commands because mdevctl doesn't
support a separate 'create' command. mdevctl uses 'start' for both
starting a pre-defined device as well as for creating and starting a new
transient device. The libvirt code will be more readable if we treat
these as separate commands. When we need to actually execute mdevctl,
the 'create' command will be translated into the appropriate 'mdevctl
start' command.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-04-19 10:24:13 -05:00
Erik Skultety
963888f288 nodedev: driver: Swap virMdevctlStart and virMdevctlCreate
"start" in libvirt means - "take this object and create an
instance out of it"

"create" in libvirt most of the time means - "take and XML description,
make an object out of it and use it to create an instance"

This gets confusing with mdevctl which uses "start" for both. So, this
patch proposes to use virMdevctlStart in cases where from libvirt's POV
we're starting a defined device (unlike mdevctl). Similarly, use
virMdevctlCreate in scenarios where XML description is passed to
libvirt and a transient device is supposed to be created.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2021-04-19 10:24:13 -05:00
Jonathon Jongsma
94589d1dc8 tests: nodedev: switch all test macros to accept a filename
Rather than specifying a UUID string to some test macros, just pass a
filename to an xml definition. This helps work toward unifying the test
macros and making it more maintainable.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2021-04-19 10:24:13 -05:00
Michal Privoznik
c8238579fb lib: Drop internal virXXXPtr typedefs
Historically, we declared pointer type to our types:

  typedef struct _virXXX virXXX;
  typedef virXXX *virXXXPtr;

But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.

This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:

https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-04-13 17:00:38 +02:00
Peter Krempa
d146b193e2 nodedevmdevctltest: Use internal linewrapping and variable command path stripping
Remove `nodedevCompareToFile` which was stripping the path to mdevctl
since it's no longer needed if we use the new features of
virCommandSetDryRun.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-04-12 15:55:10 +02:00
Peter Krempa
01c357a4c9 virCommandSetDryRun: Add flags to linebreak and strip prefix from the command buffer
virCommandToStringFull used internally when virCommandSetDryRun is
requested allows to strip command path and wrap lines nicely. Expose
these via virCommandSetDryRun so that tests can use those features
instead of local hacks.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-04-12 15:55:10 +02:00
Peter Krempa
0dffca8f95 virCommandSetDryRun: Rework resetting of the dry run data
While virCommandSetDryRun is used in tests only, there were some cases
when error paths would not call the function with NULL arguments to
reset the dry run infrastructure.

Introduce virCommandDryRunToken type which must be allocated via
virCommandDryRunTokenNew and passed to virCommandSetDryRun.

This way we can use automatic variable cleaning to trigger the cleanup
of virCommandSetDryRun parameters and also the use of the token variable
ensures that all callers of virCommandSetDryRun clean up after
themselves and also that the token isn't left unused in the code.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-04-12 15:55:10 +02:00
Jonathon Jongsma
c0db1af2f8 api: add virNodeDeviceCreate()
This new API function provides a way to start a persistently-defined
mediate device that was defined by virNodeDeviceDefineXML() (or one that
was defined externally via mdevctl)

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:14:01 -05:00
Jonathon Jongsma
bb311cede7 api: add virNodeDeviceUndefine()
This interface allows you to undefine a persistently defined (but
inactive) mediated devices. It is implemented via 'mdevctl'

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:13:32 -05:00
Jonathon Jongsma
f98c415f8a nodedev: refactor tests to support mdev undefine
mdevctl 'stop' and 'undefine' commands take the same uuid parameter, so
refactor the test infrastructure to share common implementation for both
of these commands. The 'undefine' command will be introduced in a
following patch.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:11:17 -05:00
Jonathon Jongsma
a48a2abe60 nodedev: add function to generate mdevctl define command
Abstract out the function used to generate the commandline for 'mdevctl
start' since they take the same arguments. Add tests to ensure that
we're generating the command properly.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:08:59 -05:00
Jonathon Jongsma
066c13de66 nodedev: add ability to list defined mdevs
This adds an internal API to query for persistent mediated devices
that are defined by mdevctl. Upcoming commits will make use of this
information.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:07:35 -05:00
Jonathon Jongsma
58d093a55f nodedev: add ability to parse mdevs from mdevctl
This function will parse the list of mediated devices that are returned
by mdevctl and convert it into our internal node device representation.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:05:31 -05:00
Jonathon Jongsma
eb27a233f2 tests: trivial change to mdevctl test macro
In order to be able to pass a string as user data to the test function,
change the DO_TEST_FULL() macro to expect a pointer and pass it directly
to virTestRun(). Previously we expected the caller to pass a struct
variable and then passed the address of that to virTestRun().

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:05:19 -05:00
Jonathon Jongsma
682a65a322 tests: remove extra trailing semicolon
The macro should not have a trailing semicolon so that when the macro is
used, the user can add a semicolon themselves.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:03:34 -05:00
Jonathon Jongsma
ab1703191b nodedev: capture and report stderror from mdevctl
When an mdevctl command fails, there is not much information available
to the user about why it failed. This is partly because we were not
making use of the error message that mdevctl itself prints upon failure.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:03:22 -05:00
Laine Stump
05332bb866 tests: replace VIR_FREE with g_free in all vir*Free() functions
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2021-02-05 00:20:45 -05:00
Ján Tomko
a037ae8614 tests: use g_new0 instead of VIR_ALLOC
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-09-23 14:54:38 +02:00
Ján Tomko
0a37e0695b Split declarations from initializations
Split those initializations that depend on a statement
above them.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-08-25 19:03:11 +02:00
Laine Stump
25c23b95b6 tests: use g_auto for all virBuffers
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-07-08 16:34:09 -04:00
Jonathon Jongsma
872c9b97c2 nodedev: Add testing for 'mdevctl stop'
Test that we run 'mdevctl' with the proper arguments when we destroy
mediated devices with virNodeDeviceDestroy()

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-19 10:39:55 +02:00
Jonathon Jongsma
9badcbbb1d nodedev: Add testing for 'mdevctl start'
Test that we run 'mdevctl' with the proper arguments when creating new
mediated devices with virNodeDeviceCreateXML().

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-19 10:39:55 +02:00