Commit Graph

164 Commits

Author SHA1 Message Date
Matthew Booth
60e8977fdd Get QEMU pty paths from the monitor
This change makes the QEMU driver get pty paths from the output of the
monitor 'info chardev' command. This output is structured, and contains
both the name of the device and the path on the same line. This is
considerably more reliable than parsing the startup log output, which
requires the parsing code to know which order QEMU will print pty
information in.

Note that we still need to parse the log output as the monitor itself
may be on a pty. This should be rare, however, and the new code will
replace all pty paths parsed by the log output method once the monitor
is available.

* src/qemu/qemu_monitor.(c|h) src/qemu_monitor_text.(c|h): Implement
  qemuMonitorGetPtyPaths().
* src/qemu/qemu_driver.c: Get pty path information using
  qemuMonitorGetPtyPaths().
2009-12-14 10:50:01 +01:00
Daniel P. Berrange
89832303d7 Add QEMU monitor callbacks for basic lifecycle events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add callbacks
  for reset, shutdown, poweroff and stop events. Add convenience
  methods for emiting those events
2009-12-08 13:46:55 +00:00
Daniel P. Berrange
e9f4c94301 Switch over to passing a callback table to QEMU monitor
With addition of events there will be alot of callbacks.
To avoid having to add many APIs to register callbacks,
provide them all at once in a big table

* src/qemu/qemu_driver.c: Pass in a callback table to QEMU
  monitor code
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h Replace
  the EOF and disk secret callbacks with a callback table
2009-12-08 13:46:55 +00:00
Daniel P. Berrange
3a4f172fdd Support for JSON mode monitor
Initial support for the new QEMU monitor protocol  using JSON
as the data encoding format instead of plain text

* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
  mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
2009-12-08 13:46:54 +00:00
Daniel P. Berrange
c5358c0e1f Introduce callbacks for serializing domain object private data to XML
Now that drivers are using a private domain object state blob,
the virDomainObjFormat/Parse methods are no longer able to
directly serialize all neccessary state to/from XML. It is
thus neccessary to introduce a pair of callbacks fo serializing
private state.

The code for serializing vCPU PIDs and the monitor device
config can now move out of domain_conf.c and into the
qemu_driver.c where they belong.

* src/conf/capabilities.h: Add callbacks for serializing private
  state to/from XML
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove the
  monitor, monitor_chr, monitorWatch, nvcpupids and vcpupids
  fields from virDomainObjPtr. Remove code that serialized
  those fields
* src/libvirt_private.syms: Export virXPathBoolean
* src/qemu/qemu_driver.c: Add callbacks for serializing monitor
  and vcpupid data to/from XML
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Pass monitor
  char device config into qemuMonitorOpen directly.
2009-12-08 13:46:54 +00:00
Daniel P. Berrange
8c12b20c61 Add a 'format' arg to qemuMonitorChangeMedia() since JSON will support it
The current QEMU disk media change does not support setting the
disk format. The new JSON monitor will support this, so add an
extra parameter to pass this info in

* src/qemu/qemu_driver.c: Pass in disk format when changing media
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Add a 'format' arg to qemuMonitorChangeMedia()
2009-12-08 13:46:53 +00:00
Daniel P. Berrange
fa1e4759db Move qemuMonitorEscape + migrate status enum into shared monitor code
The qemuMonitorEscape() method, and the VIR_ENUM for migration
status will be needed by the JSON monitor too, so move that code
into the shared qemu_monitor.c file instead of qemu_monitor_text.c

* src/qemu/qemu_monitor.h: Declare qemuMonitorMigrationStatus enum
  and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor.c: Implement qemuMonitorMigrationStatus enum
  and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor_text.c: Remove above methods/enum
2009-12-08 13:46:53 +00:00
Daniel P. Berrange
79533da1b3 Fix crash when deleting monitor while a command is in progress
If QEMU shuts down while we're in the middle of processing a
monitor command, the monitor will be freed, and upon cleaning
up we attempt to do  qemuMonitorUnlock(priv->mon) when priv->mon
is NULL.

To address this we introduce proper reference counting into
the qemuMonitorPtr object, and hold an extra reference whenever
executing a command.

* src/qemu/qemu_driver.c: Hold a reference on the monitor while
  executing commands, and only NULL-ify the priv->mon field when
  the last reference is released
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add reference
  counting to handle safe deletion of monitor objects
2009-12-08 13:46:48 +00:00
Daniel P. Berrange
1dc10a7b28 Fully asynchronous monitor I/O processing
Change the QEMU monitor file handle watch to poll for both
read & write events, as well as EOF. All I/O to/from the
QEMU monitor FD is now done in the event callback thread.

When the QEMU driver needs to send a command, it puts the
data to be sent into a qemuMonitorMessagePtr object instance,
queues it for dispatch, and then goes to sleep on a condition
variable. The event thread sends all the data, and then waits
for the reply to arrive, putting the response / error data
back into the qemuMonitorMessagePtr and notifying the condition
variable.

There is a temporary hack in the disk passphrase callback to
avoid acquiring the domain lock.  This avoids a deadlock in
the command processing, since the domain lock is still held
when running monitor commands. The next commit will remove
the locking when running commands & thus allow re-introduction
of locking the disk passphrase callback

* src/qemu/qemu_driver.c: Temporarily don't acquire lock in
  disk passphrase callback. To be reverted in next commit
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Remove
  raw I/O functions, and a generic qemuMonitorSend() for
  invoking a command
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Remove all low level I/O, and use the new qemuMonitorSend()
  API. Provide a qemuMonitorTextIOProcess() method for detecting
  command/reply/prompt boundaries in the monitor data stream
2009-11-10 13:27:18 +00:00
Daniel P. Berrange
77cfcccfa8 Locking of the qemuMonitorPtr object
In preparation of the monitor I/O process becoming fully asynchronous,
it is neccessary to ensure all access to internals of the qemuMonitorPtr
object is protected by a mutex lock.

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add mutex for locking
  monitor.
* src/qemu/qemu_driver.c: Add locking around all monitor commands
2009-11-10 12:16:44 +00:00
Daniel P. Berrange
41d8968d43 Wrap text mode monitor APIs, pass qemuMonitorPtr directly to APIs
Change the QEMU driver to not directly invoke the text mode monitor
APIs. Instead add a generic wrapper layer, which will eventually
invoke either the text or JSON protocol code as needed. Pass an
qemuMonitorPtr object into the monitor APIs instead of virDomainObjPtr
to complete the de-coupling of the monitor impl from virDomainObj
data structures

* src/qemu/qemu_conf.h: Remove qemuDomainObjPrivate definition
* src/qemu/qemu_driver.c: Add qemuDomainObjPrivate definition.
  Pass qemuMonitorPtr into all monitor APIs instead of the
  virDomainObjPtr instance.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add thin
  wrappers for all qemuMonitorXXX command APIs, calling into
  qemu_monitor_text.c/h
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Rename qemuMonitor -> qemuMonitorText & update to accept
  qemuMonitorPtr instead of virDomainObjPtr
2009-11-10 12:15:27 +00:00
Daniel P. Berrange
4604c18f0b Move encryption lookup back into qemu driver file
Decouple the monitor code from the virDomainDefPtr structure
by moving the disk encryption lookup code back into the
qemu_driver.c file. Instead provide a function callback to
the monitor code which can be invoked to retrieve encryption
data as required.

* src/qemu/qemu_driver.c: Add findDomainDiskEncryption,
  and findVolumeQcowPassphrase. Pass address of the method
  findVolumeQcowPassphrase into qemuMonitorOpen()
* src/qemu/qemu_monitor.c: Associate a disk
  encryption function callback with the qemuMonitorPtr
  object.
* src/qemu/qemu_monitor_text.c: Remove findDomainDiskEncryption
  and findVolumeQcowPassphrase.
2009-11-10 12:15:01 +00:00
Daniel P. Berrange
1cfd5a00eb Make use of private data structure for monitor state
Introduce a new qemuDomainObjPrivate object which is used to store
the private QEMU specific data associated with each virDomainObjPtr
instance. This contains a single member, an instance of the new
qemuMonitorPtr object which encapsulates the QEMU monitor state.
The internals of the latter are private to the qemu_monitor* files,
not to be shown to qemu_driver.c

* src/qemu/qemu_conf.h: Definition of qemuDomainObjPrivate.
* src/qemu/qemu_driver.c: Register a functions for creating
  and freeing qemuDomainObjPrivate instances with the domain
  capabilities. Remove the qemudDispatchVMEvent() watch since
  I/O watches are now handled by the monitor code itself. Pass
  a new qemuHandleMonitorEOF() callback into qemuMonitorOpen
  to allow notification when the monitor quits.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Introduce
  the 'qemuMonitor' object. Temporarily add new APIs
  qemuMonitorWrite, qemuMonitorRead, qemuMonitorWaitForInput
  to allow text based monitor impl to perform I/O.
* src/qemu/qemu_monitor_text.c: Call APIs for reading/writing
  to monitor instead of accessing the file handle directly.
2009-11-10 12:14:30 +00:00
Daniel P. Berrange
ff26194143 Move code for low level QEMU monitor interaction into separate file
The qemu_driver.c code should not contain any code that interacts
with the QEMU monitor at a low level. A previous commit moved all
the command invocations out. This change moves out the code which
actually opens the monitor device.

* src/qemu/qemu_driver.c: Remove qemudOpenMonitor & methods called
  from it.
* src/Makefile.am: Add qemu_monitor.{c,h}
* src/qemu/qemu_monitor.h: Add qemuMonitorOpen()
* src/qemu/qemu_monitor.c: All code for opening the monitor
2009-11-10 12:14:22 +00:00