The @vhostuser member of virStorageSource structure is allocated
during parsing in virDomainDiskSourceVHostUserParse() but never
freed leading to a memleak. Since the member is an object it has
to be unrefed instead of g_free()-d.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Currently, nmdm console device requires user to specify master and slave
path attributes (such as /dev/nmdm0A and /dev/nmdm0B respectively).
However, making user find a non-occupied device name might be not
convenient, especially for the remote connections.
Update the logic to make these attributes optional. In case if not
specified, use /dev/nmdm$UUID[AB], where $UUID is a domain's UUID.
With this schema it's unlikely nmdm device will clash with other domains
or even other non-bhyve nmdm devices.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of these options are actually supported by vhostuser disk so
we should allow them to be usable.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
virDomainCapsDispose() was the only caller of
virDomainCapsStringValuesFree(), which 1) didn't actually free the
object it was called with, but only cleared it, making it less
mechanical to convert from VIR_FREE to g_free (since it's not
immediately obvious from looking at virDomainCapsStringValuesFree()
that the pointers being cleared will never again be used).
We could have renamed the function to virDomainCapsStringValuesClear()
to side-step the confusion of what the function actually does, but
that would just make the upcoming switch from VIR_FREE to g_free
require more thought. But since there is only a single caller to the
function, and it is a vir*Dispose() function (indicating that the
object containing the virDomainCapsStringValues is going to be freed
immediately after the function finishes), and thus VIR_FREE() *could*
be safely replaced by g_free()), we instead just move the contents of
virDomainCapsStringValuesFree() into virDomainCapsDispose() (and
*that* function will be trivially converted in an upcoming
"mechanical" patch).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Hypervisors are capable of reporting that some features are deprecated.
This should be used to mark a domain as tainted.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has the ability to mark machine types as deprecated. This should be
exposed to management applications in the capabilities.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has the ability to mark CPUs as deprecated. This should be exposed
to management applications in the domain capabilities.
This attribute is only set when the model is actually deprecated.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Switch to the more common approach of having arrays allocated separately
rather than trailing the struct.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Pass the parameter clock rt to qemu to ensure that the
virtual machine is not synchronized with the host time
Signed-off-by: gongwei <gongwei@smartx.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch takes on one set of examples of unnecessary use of
VIR_FREE() when g_free() is adequate - it modifies only vir*Free()
functions within the conf directory that take a single pointer and
free the object pointed to by that argument before returning. The
modification is to replace VIR_FREE() with g_free() for the object
itself *and* for all subordinate chunks of memory pointed to by that
object.
(NB: there are other functions that VIR_FREE subordinate memory of
objects that end up being freed before return (also sometimes with
VIR_FREE); I am purposefully ignoring those to reduce scope and focus
on a sub class where the pointlessness is obvious.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
usually a function call vir*Free() will take a single pointer to an
object as its argument, and will then free all resources associated
with that object, including the object
itself. virStorageEnctyptionInfoDefFree() doesn't do that - it frees
all the subordinate resources of the ojbect, but doesn't free the
object itself; usually a function like that is called
vir*Clear(). Let's rename this function to not be misleading.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is no point in setting the interface model to unknown during
virDomainNetDefFree(), since we are about to free the object anyway
(and the model isn't used anywhere in the rest of the function).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The memory containing the pointer is going to be freed momentarily anyway.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function clears out and frees a virDomainZPCIAddressIds object,
so that's that's what it should take as its argument, *not* the
pointer to a parent object that contains the object we want to free.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is no need to open code the PCI address string format
when we have a function that does exactly that.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename virDomainCheckVirtioOptions into
virDomainCheckVirtioOptionsAreAbsent since it checks if all
virtio options are absent. The old name was very misleading.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add virtio related options iommu, ats and packed as driver element attributes
to vsock devices. Ex:
<vsock model='virtio'>
<cid auto='no' address='3'/>
<driver iommu='on'/>
</vsock>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainVirtioOptionsCheckABIStability() function is called
from various ABI stability check functions. Every caller checks
if both old and new definitions have virtio options set and only
after that they call the function. This is suboptimal because:
a) this check can be done in the function itself (making all
callers shorter),
b) is inherently wrong, because it doesn't catch case where one
definition has virtio options set and the other doesn't.
Do proper checks at the beginning of the function and simplify
its calls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The previous commit rendered this function empty and needless.
Remove it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of virDomainCheckVirtioOptions() function is to check
whether no virtio options are set, i.e. no @iommu no @ats and no
@packed attributes were present in given device's XML (yeah, the
function has very misleading name). Nevertheless, this kind of
check belongs to validation phase, but now is done in post parse
phase. Move the function and its calls to domain_validate.c so
that future code is not tempted to repeat this mistake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code handles XML bits and internal definition and should be
in conf directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The code handles XML bits and internal definition and should be
in conf directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It's better to fill in missing values in post parse callbacks
than during parsing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The _virDomainMemoryDef structure has @uuid member which is
needed for PPC64 guests. No other architectures use it. Since the
member is VIR_UUID_BUFLEN bytes long, the structure is
unnecessary big. If the member is just a pointer then we can also
replace some calls of virUUIDIsValid() with plain test against
NULL and also simplify formatter code which can now also check
the pointer against NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virtio-pmem is a virtio variant of NVDIMM and just like
NVDIMM virtio-pmem also allows accessing host pages bypassing
guest page cache. The difference is that if a regular file is
used to back guest's NVDIMM (model='nvdimm') the persistence of
guest writes might not be guaranteed while with virtio-pmem it
is.
To express this new model at domain XML level, I've chosen the
following:
<memory model='virtio-pmem' access='shared'>
<source>
<path>/tmp/virtio_pmem</path>
</source>
<target>
<size unit='KiB'>524288</size>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</memory>
Another difference between NVDIMM and virtio-pmem is that while
the former supports NUMA node locality the latter doesn't. And
also, the latter goes onto PCI bus and not into a DIMM module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 154df5840d added support for <metadata_cache> as property of a
<disk>. Since the same parser is used to parse the XML used with
virDomainBlockCopy it starts the copy job with the appropriate cache
configured, but the <mirror> doesn't show this configuration nor it's
preserved if libvirtd is restarted during the mirror.
Add parsing, formatting and tests for <metadata_cache> for a <mirror>.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The bridge reattach functionality in this function should be called
for interface types other than just type='network', so make it
callable for any type - it just becomes a NOP for types where no
action is needed.
In the case of <interface type='network'> we need to create a port in
the network driver, and for both type='network and type='bridge' we
need to reattach the bridge device (note that
virDomainNetGetActualBridgeName() gets the bridge name from the
appropriate (and different!) location for either type of interface).
All other interfaces currently require no action.
modifying callers of this function to actually call it for all
interface types is in the next patch. For now the behavior should be
identical pre and post-patch.
(NB: the conn argument can now legitimately be NULL, so we need to
change the ATTRIBUTE_NONNULL() directive for the function's
declaration - I noticed when making this change that argument 3 (the
NetDefPtr) could never be NULL, so I added ATTRIBUTE_NONNULL(3) while
removing ATTRIBUTE_NONNULL(1) (conn)).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>Reviewed-by: Michal Privoznik <mprivozn@redhat.com>#Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to the domain config code it may be beneficial to control the
cache size of images introduced as snapshots into the backing chain.
Wire up handling of the 'metadata_cache' element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain specific cases it might be beneficial to be able to control
the metadata caching of storage image format drivers of a hypervisor.
Introduce XML machinery to set the maximum size of the metadata cache
which will be used by qemu's qcow2 driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unify the code with other places using virXMLFormatElement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use one variable per extracted property instead of reusing strings and
drop needless VIR_FREE calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, swtpm TPM state file is removed when a transient domain is
powered off or undefined. When we store TPM state on a shared storage
such as NFS and use transient domain, TPM states should be kept as it is.
Add per-TPM emulator option `persistent_sate` for keeping TPM state.
This option only works for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' persistent_state='yes'/>
</tpm>
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In virSecurityLabelDefParseXML() we are parsing the <seclabel/>
element among with its attributes. Some of the attributes are
limited in length (because of virNodeGetSecurityModel()), however
some are not. And for the latter ones we don't need to use
virXMLPropStringLimit() to parse them. Moreover, using
VIR_SECURITY_LABEL_BUFLEN as the limit is wrong - we are not
storing the parsed strings into a static buffer of that size
rather than checking if the string passes string -> enum
conversion.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On s390x, devices are attached to the channel IO subsytem by default,
so we need to look up scsi controllers via their CCW address there
instead of using PCI.
This fixes "virsh domfsinfo" on s390x for virtio-scsi devices (the first
attempt from commit f8333b3b0a7 did it in the wrong way, reporting the
device name on the guest side instead of the target name on the host side).
Fixes: f8333b3b0a ("qemu: Fix domfsinfo for non-PCI device information ...")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1858771
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On s390x, devices are accessed via the channel subsystem by default,
so we need to look up the devices via their CCW address there instead
of using PCI.
This fixes "virsh domfsinfo" on s390x for virtio-block devices (the first
attempt from commit f8333b3b0a7 did it in the wrong way, reporting the
device name on the guest side instead of the target name on the host side).
Fixes: f8333b3b0a ("qemu: Fix domfsinfo for non-PCI device information ...")
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1858771
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extract ReserveName/GenerateName from netdevtap and netdevmacvlan as
common helper functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Some functions in domain_validate.c are throwing VIR_ERR_XML_ERROR,
when in reality none of these errors are exclusive to XML parsing.
Change to VIR_ERR_CONFIG_UNSUPPORTED to be more adequate.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All other validations from virDomainDefValidateInternal() are done
in their own functions. Take IOMMU validation out of the function
body and into its own function.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
