Commit Graph

106 Commits

Author SHA1 Message Date
Peter Krempa
f15d4cb1c8 qemu: blockjob: Log blockjobs which are dropped when untracked by qemu
Since we don't know what happened to the job we can't do much about it
but we can at least log that this happened.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-11-27 15:59:33 +01:00
Peter Krempa
8622498f6e qemu: blockjob: Fix deadlock when terminating job with invalid data
We must exit the monitor prior to refusing other work, otherwise the VM
object will become unusable.

This bug was introduced in commit v5.5.0-244-gc412383796 but thankfully
the code path was not excercised without QEMU_CAPS_BLOCKDEV.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-11-27 15:59:33 +01:00
Peter Krempa
a887da529c qemu: blockjob: Properly propagate cancellation of blockjobs
qemu returns an error message in the job statistics even if the job was
cancelled to emphasize it was not successful. Libvirt didn't properly
transform it into QEMU_BLOCKJOB_STATE_CANCELLED though.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-11-27 15:59:33 +01:00
Michal Privoznik
1c12b86185 qemu: Separate image metadata removal into a function
There are four places where we remove image XATTRs and in all of
them we have the same for() loop with the same body. Move it into
a separate function because I'm about to introduce fifth place
where the same needs to be done.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2019-11-22 10:48:04 +01:00
Peter Krempa
b036834eae qemu: blockjob: Transfer 'readonly' state of images after active layer block commit
When commiting a different image becomes the disk source. Since we store
the readonly flag per-image we must update it to the same state the
original image had.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-14 12:42:09 +01:00
Michal Privoznik
d4e5b98330 qemu: Use g_strdup_printf() instead of virAsprintf()
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-12 16:15:58 +01:00
Peter Krempa
509c6e5140 qemu: blockjob: Use 'g_free' in qemuBlockJobDataDispose
Prepare the function for addition of new members to clean.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-10-24 19:35:34 +02:00
Peter Krempa
0b82b13adc qemu: blockjob: Refactor qemuBlockJobEventProcessConcludedTransition
Use only one switch case selecting job type and decide what's successful
outcome on a case-by-case basis.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-10-24 19:35:34 +02:00
Peter Krempa
5bf573f62b Replace virDomainDiskByName by virDomainDiskByTarget in appropriate cases
In many cases we used virDomainDiskByName to solely look up disk by
target. We have a new helper now so we can replace it.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-21 16:29:18 +02:00
Ján Tomko
ce36e33c10 qemu: use g_strdup instead of VIR_STRDUP
Replace all occurrences of
  if (VIR_STRDUP(a, b) < 0)
     /* effectively dead code */
with:
  a = g_strdup(b);

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-21 12:51:57 +02:00
Ján Tomko
72a1bb8e4c qemu: use g_steal_pointer instead of VIR_STEAL_PTR
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 15:59:42 +02:00
Ján Tomko
483a14f871 Remove all usage of VIR_RETURN_PTR
Prefer:
    return g_steal_pointer(&ptr);

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 15:59:41 +02:00
Ján Tomko
2b390b97b4 Use g_autoptr instead of VIR_AUTOUNREF
Now that all the types using VIR_AUTOUNREF have a cleanup func defined
to virObjectUnref, use g_autoptr instead of VIR_AUTOUNREF.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 12:06:44 +02:00
Ján Tomko
45678bd70a Use g_autoptr instead of VIR_AUTOPTR
Since commit 44e7f02915
    util: rewrite auto cleanup macros to use glib's equivalent

VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 12:06:43 +02:00
Ján Tomko
1e2ae2e311 Use g_autofree instead of VIR_AUTOFREE
Since commit 44e7f02915
    util: rewrite auto cleanup macros to use glib's equivalent

VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 12:06:43 +02:00
Ján Tomko
ada7596b92 qemu: use G_GNUC_UNUSED
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-15 11:25:24 +02:00
Michal Privoznik
70d353356d qemu_blockjob: Remove secdriver metadata for whole backing chain on job completion
Turns out, block mirror is not the only job a disk can have. It
can also do commits of one layer into the other. Or possibly some
other tricks too. Problem is that while we set seclabels on given
layers of backing chain when the job is starting (via
qemuDomainStorageSourceAccessAllow()) we don't restore them when
job finishes. This leaves XATTRs set and corresponding images
unusable.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
2019-09-25 12:34:09 +02:00
Peter Krempa
87c8e7dbf5 qemu: blockjob: Refuse to register blockjob if disk already has one
Most code paths prevent starting a blockjob if we already have one but
the job registering function does not do this check. While this isn't a
problem for regular cases we had a bad test case where we registered two
jobs for a single disk which leaked one of the jobs. Prevent this in the
registering function until we allow having multiple jobs per disk.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-09-16 11:50:28 +02:00
Michal Privoznik
16fb3c8b83 qemu_blockjob: Remove secdriver metadata more frequently
If a block job reaches failed/cancelled state, or is completed
without pivot then we must remove security driver metadata
associated to the backing chain so that we don't leave any
metadata behind.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1741456

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
2019-08-31 10:11:37 +02:00
Michal Privoznik
7f99d8a739 qemu_blockjob: Print image path on failed security metadata move too
When a block job is completed, the security image metadata are
moved to the new image. If this fails an warning is printed, but
the message contains only domain name and lacks image paths. Put
them both into the warning message.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
2019-08-31 10:11:37 +02:00
Michal Privoznik
143a0f8b05 qemu_blockjob: Move active commit failed state handling into a function
Currently, there are only a few lines of code so a separate
function was not necessary, but this will change. So instead of
putting all the new code under 'case
QEMU_BLOCKJOB_TYPE_ACTIVE_COMMIT' create a separate function.
Just like every other case has one.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
2019-08-31 10:11:37 +02:00
Peter Krempa
ce7229a3b0 qemu: Add blockdev support for the block copy job
Implement job handling for the block copy job (drive/blockdev-mirror)
when using -blockdev. In contrast to the previously implemented
blockjobs the block copy job introduces new images to the running qemu
instance, thus requires a bit more handling.

When copying to new images the code now makes use of blockdev-create to
format the images explicitly rather than depending on automagic qemu
behaviour.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-08-16 13:26:10 +02:00
Peter Krempa
545edb2502 qemu: Introduce code for blockdev-create
QEMU finally exposes an interface which allows us to instruct it to
format or create arbitrary images. This is required for blockdev
integration of block copy and snapshots as we need to pre-format images
prior to use with blockdev-add.

This path introduces job handling and also helpers for formatting and
attaching a whole image described by a virStorageSource.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-08-16 13:26:10 +02:00
Peter Krempa
7b8db52f5b qemu: blockjob: Copy non-detected chain fully in qemuBlockJobRewriteConfigDiskSource
Rather than copying just the top level image, let's copy the full user
provided backing chain.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-08-16 13:26:10 +02:00
Peter Krempa
016584c52c qemu: blockjob: Remove qemuBlockJobDiskRegisterMirror
The utility of the function is extremely limited as for block copy
we need to register the mirror chain earlier than when it's set with the
disk. This means that it would be open-coded in that case.

Avoid any weird usage and just open-code the only current usage, remove
the function, and reword the docs.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-08-16 13:26:10 +02:00
Peter Krempa
3f93884a4d qemu: Add -blockdev support for block commit job
Introduce the handler for finalizing a block commit and active bloc
commit job which will allow to use it with blockdev.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-29 13:58:26 +02:00
Peter Krempa
1bf3808207 qemu: Add -blockdev support for block pull job
Introduce the handler for finalizing a block pull job which will allow
to use it with blockdev.

This patch also contains some additional machinery which is required to
store all the relevant job data in the status XML which will also be
reused with other block job types.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-29 13:58:25 +02:00
Peter Krempa
56ad575dbe qemu: blockjob: Ensure that config disk source is identical when modifying it
qemuBlockJobRewriteConfigDiskSource rewrites the disk source only
according to the 'target'. This means that if someone would change the
inactive config of the VM to refer to a different disk a block job would
rewrite it when finishing a job which modifies the disk source.

Make sure that this does not happen by verifying that the source of the
config disk is the same.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
2019-07-25 13:21:33 +02:00
Peter Krempa
d3833b0799 qemu: blockjob: Clear out any irrelevant data in copied source
Since we copy everything from the original storage source including some
runtime data which are not relevant for the config we should clear them.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
2019-07-25 13:21:33 +02:00
Peter Krempa
3b27b5f35a qemu: blockjob: Split out update of persistent XML disk's source on mirror jobs
Both active block commit and block copy modify the disk source of the
active definition and thus also must modify the corresponding inactive
definition source so that the VM starts up later. This is currently
implemented in the legacy block job handler but the logic will be useful
also for the new handlers. Split it out which also simplifies it.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
2019-07-25 13:21:33 +02:00
Peter Krempa
dae7d01322 qemu: blockjob: Register disk->mirror with a job only when required
The <mirror> subelement is used in two ways: in a commit job to point to
existing storage, and in a block-copy job to point to additional
storage. We need a way to track only the distinct storage.

This patch introduces qemuBlockJobDiskRegisterMirror which registers the
mirror chain separately only for jobs which require it. This also comes
with remembering that in the status XML.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
2019-07-25 13:21:33 +02:00
Peter Krempa
35a97e4532 qemu: blockjob: Document qemuBlockJobRegister
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
2019-07-25 13:21:33 +02:00
Peter Krempa
ed1c0aba34 qemu: blockjob: Use proper value when setting disk's READY state
Commit c412383796 used a value from wrong enum when setting the disk's
mirrorState variable. This meant that a 'READY' job would show up as
'PIVOTING'.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
2019-07-25 13:21:33 +02:00
Peter Krempa
93b77cba0a qemu: blockjob: Reset 'synchronous' block job handling flag prior to flushing events
When returning to asynchronous block job handling the flag which
determines the handling method should be reset prior to flushing
outstanding events. If there's an event to process the handler may
invoke the monitor and another event may be received. We'd not process
that one. Reset the flag earlier.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-25 13:21:33 +02:00
Peter Krempa
7005779653 qemu: Use QEMU_BLOCKJOB_STATE_PIVOTING/ABORTING in qemuDomainBlockJobAbort
Set the correct job states after the operation is requested in qemu.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-25 13:21:32 +02:00
Peter Krempa
9e200a0f39 qemu: blockjob: Add block job states for abort and pivot operations
When initiating a pivot or abort of a block job we need to track which
one was initiated. Currently it was done via data stashed in
virDomainDiskDef. Add possibility to track this also together with the
job itself.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-25 13:21:32 +02:00
Peter Krempa
ae4b921f2a qemu: blockjob: Unplug inherited storage chains when concluding blockjob
In cases when the disk frontend was unplugged while a blockjob was
running the blockjob inherits the backing chain. When the blockjob is
then terminated we need to unplug the chain as it will not be used any
more.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
b3f8ad07dd qemu: blockjob: Track orphaned backing chains in blockjob status XML
When the guest unplugs the disk frontend libvirt is responsible for
deleting the backend. Since a blockjob may still have a reference to the
backing chain when it is running we'll have to store the metadata for
the unplugged disk for future reference.

This patch adds 'chain' and 'mirrorChain' fields to 'qemuBlockJobData'
to keep them around with the job along with status XML machinery and
tests. Later patches will then add code to change the ownership of the
chain when unplugging the disk backend.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
59a0306f07 qemu: process: Refresh -blockdev based blockjobs on reconnect to qemu
Refresh the state of the jobs and process any events that might have
happened while libvirt was not running.

The job state processing requires some care to figure out if a job
needs to be bumped.

For any invalid job try doing our best to cancel it.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
c412383796 qemu: blockjob: Add modern block job event handler
Add the infrastructure to handle block job events in the -blockdev era.

Some complexity is required as qemu does not bother to notify whether
the job was concluded successfully or failed. Thus it's necessary to
re-query the monitor.

To minimize the possibility of stuck jobs save the state into the XML
prior to handling everything so that the reconnect code can potentially
continue with the cleanup.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
b2d6ae674e qemu: blockjob: Add helper to convert monitor job status to internal state
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
e55d64818d qemu: blockjob: Add 'concluded' state for a block job
This new state is entered when qemu finished the job but libvirt does
not know whether it was successful or not.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
3b6161a5f2 qemu: driver: Remove unnecessary saving of status XML
Now that the blockjob handling code deals with the status XML we don't
need to save it explicitly when starting blockjobs.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
4cc4357f3e qemu: blockjob: Save status XML when modifying job state
Now that block job data is stored in the status XML portion we need to
make sure that everything which changes the state also saves the status
XML. The job registering function is used while parsing the status XML
so in that case we need to skip the XML saving.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
3dc496e098 qemu: blockjob: Export functions for allocating and registering job data
When parsing the status XML we need to register all existing jobs.
Export the functions so that they are usable in other modules.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
8d82e6d98a qemu: blockjob: Add string convertors for blockjob type and state enums
Later on we'll format these values into the status XML so the from/to
string functions will come handy. The implementation also notes that
these will be used in the status XML to avoid somebody changing the
values.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
5ff46aaa7f qemu: blockjob: Register new and running blockjobs in the global table
Add the job structure to the table when instantiating a new job and
remove it when it terminates/fails.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
9dd12d4ecf qemu: blockjob: Update new job state earlier in qemuBlockJobEventProcessLegacy
The legacy job handler does not look at the old job state so we can
update it earlier.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
b6316435e4 qemu: blockjob: Save config only in qemuBlockJobEventProcessLegacyCompleted
There's no need to do it if the job is not completed. The new helper
allows to do this with much less hassle in the correct place.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
dbdda6aca0 qemu: blockjob: Separate and unify block job (un)registration
Rename and move qemuBlockJobTerminate to qemuBlockJobUnregister and
separate bits from qemuBlockJobDiskNew which register the job with the
disk. This creates an unified interface for other APIs to use.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00