Commit 7bff56a worked in an incremental build, but fails for a
fresh clone; apparently, if make sees both an actual file
spelling and an inference rule, only the exact spelling is used.
CCLD libvirt_driver_test.la
CC libvirt_driver_remote_la-remote_driver.lo
remote/remote_driver.c:4707:34: fatal error: remote_client_bodies.h: No such file or directory
compilation terminated.
BUILT_SOURCES to the rescue, instead of trying to mess with .lo
dependencies directly.
* src/Makefile.am (REMOTE_DRIVER_PREREQS, %remote_driver.lo): Drop...
(BUILT_SOURCES): ...and add here instead.
(cherry picked from commit ca02b101d7)
Conflicts:
src/Makefile.am
We had a distributed file (remote_protocol.h, which in turn was
a prereq to remote_driver.c) depending on a generated file
(libvirt_probes.h), which is a no-no for a VPATH build from a
read-only source tree (no wonder 'make distcheck' tests precisely
that situation):
File `libvirt_driver_remote.la' does not exist.
File `libvirt_driver_remote_la-remote_driver.lo' does not exist.
Prerequisite `libvirt_probes.h' is newer than target `../../src/remote/remote_protocol.h'.
Must remake target `../../src/remote/remote_protocol.h'.
Invoking recipe from Makefile:7464 to update target `../../src/remote/remote_protocol.h'.
make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/libvirt-0.9.12/_build/src'
GEN ../../src/remote/remote_protocol.h
cannot create ../../src/remote/remote_protocol.h: Permission denied at ../../src/rpc/genprotocol.pl line 31.
make[3]: *** [../../src/remote/remote_protocol.h] Error 13
Rather than making distributed .c files depend on generated files, we
really want to ensure that compilation into .lo files is not attempted
until the generated files are present, done by this patch. Since there
were two different sets of conditionally generated files that both
feed the .lo file, I had to introduce a new variable REMOTE_DRIVER_PREREQS
to keep automake happy.
After that fix, the next issue was that make treats './foo' and 'foo'
differently in determining whether an implicit %foo rule is applicable,
with the result that locking/qemu-sanlock.conf wasn't properly being
built at the right times. Also, the output for using the .aug test
files was a bit verbose.
After fixing the src directory, the next error is related to the docs
directory, where the tarball is missing a stamp file and thus tries to
regenerate files that are already present:
GEN ../../docs/apibuild.py.stamp
Traceback (most recent call last):
File "../../docs/apibuild.py", line 2511, in <module>
rebuild("libvirt")
File "../../docs/apibuild.py", line 2495, in rebuild
builder.serialize()
File "../../docs/apibuild.py", line 2424, in serialize
output = open(filename, "w")
IOError: [Errno 13] Permission denied: '../../docs/libvirt-api.xml'
make[5]: *** [../../docs/apibuild.py.stamp] Error 1
and fixing that exposed another case of a distributed file (generated
html) depending on a built file (libvirt.h), but only when doing an
in-tree build, because of a file glob.
* src/Makefile.am ($(srcdir)/remote/remote_driver.c): Change...
(libvirt_driver_remote_la-remote_driver.lo): ...to the real
dependency.
($(builddir)/locking/%-sanlock.conf): Drop $(builddir), so that
rule gets run in time for test_libvirt_sanlock.aug.
(test_libvir*.aug): Cater to silent build.
(conf_DATA): Don't ship qemu-sanlock.conf in the tarball, since it
is trivial to regenerate.
* docs/Makefile.am (EXTRA_DIST): Ship our stamp file.
($(APIBUILD_STAMP)): Don't depend on generated file.
(cherry picked from commit 7bff56a0d1)
Conflicts:
src/Makefile.am
'make dist' was depending on *protocol-structs files, which are
stored in git but in turn depended on generated files. We still
want to ship the protocol-structs files, but by renaming the
tests to something not matching a file name, we separate 'make
check' (which depends on the generated file) from 'make dist'
(which only depends on the git files). After all, the tarball
should never depend on a generated file not stored in git.
I found one more case of a git file depending on a generated
file, in a bogus virkeycode.c listing; but at least this one
had no associated rules so it never broke 'make dist'.
Reported by Wen Congyang. Latent bug has been present since
commit 62dee6f, but only recently exposed by commit 7bff56a.
* src/Makefile.am ($(srcdir)/util/virkeycode.c): Drop useless
dependency.
(BUILT_SOURCES): ...and build virkeymaps.h sooner.
(PROTOCOL_STRUCTS): Rather than depend on the struct file...
(check-local): ...convert things into a phony target of...
(check-protocol): ...a new check.
($(srcdir)/remote_protocol-struct): Rename to isolate the distributed
file from the conditional test.
(PDWTAGS): Deal with rename. Swap to compare 'expected actual'.
(cherry picked from commit 9b5970c6c4)
Libvirt updates the configuration of SPICE server only when something
changes. This is unfortunate when the user wants to disconnect a
existing spice session when the connected attribute is already
"disconnect".
This patch modifies the conditions for calling the password updater to
be called when nothing changes, but the connected attribute is already
"disconnect".
(cherry picked from commit e0f0131d33)
While unescaping the commands the commands passed through to the monitor
function qemuMonitorUnescapeArg() initialized lenght of the input string
to strlen()+1 which is fine for alloc but not for iteration of the
string.
This patch fixes the off-by-one error and drops the pointless check for
a single trailing slash that is automaticaly handled by the default
branch of switch.
(cherry picked from commit 0f4660c878)
Currently, if qemuProcessStart fail at some point, e.g. because
domain being started wants a PCI/USB device already assigned to
a different domain, we jump to cleanup label where qemuProcessStop
is performed. This unconditionally calls virSecurityManagerRestoreAllLabel
which is wrong because the other domain is still using those devices.
However, once we successfully label all devices/paths in
qemuProcessStart() from that point on, we have to perform a rollback
on failure - that is - we have to virSecurityManagerRestoreAllLabel.
(cherry picked from commit 86032b2276)
Conflicts:
src/qemu/qemu_process.c
Currently, we are passing only one boolean (migrated) so there is
no real profit in this. But it creates starting position for
next patch.
(cherry picked from commit 69dd77149c)
Conflicts:
src/qemu/qemu_process.c
when do remount,the source and target should be the same
values specified in the initial mount() call.
So change fs->dst to src.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
(cherry picked from commit 0cb787bd3c)
For pseries guest, spapr-vlan and spapr-vty is based
on spapr-vio address. According to model of network
device, the address type should be assigned automatically.
For serial device, serial pty device is recognized as
spapr-vty device, which is also on spapr-vio.
So this patch is to correct the address type of
spapr-vlan and spapr-vty, and build correct
command line of spapr-vty.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Reviewed-by: Michael Ellerman<michaele@au1.ibm.com>
(cherry picked from commit 04a319ba4e)
There is a theoretical problem of an extreme bug where we can get
into deadlock due to command handshaking. Thanks to a pair of pipes,
we have a situation where the parent thinks the child reported an
error and is waiting for a message from the child to explain the
error; but at the same time the child thinks it reported success
and is waiting for the parent to acknowledge the success; so both
processes are now blocked.
Thankfully, I don't think this deadlock is possible without at
least one other bug in the code, but I did see exactly that sort
of situation prior to commit da831af - I saw a backtrace where a
double close bug in the parent caused the parent to read from the
wrong fd and assume the child failed, even though the child really
sent success.
This potential deadlock is not quite like commit 858c247 (a deadlock
due to multiple readers on one pipe preventing a write from completing),
although the solution is similar - always close unused pipe fds before
blocking, rather than after.
* src/util/command.c (virCommandHandshakeWait): Close unused fds
sooner.
(cherry picked from commit 5e8ab3915b)
I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.
It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0
The first parameter is "tty". It sould be "parport".
If I launch qemu with -chardev parport,... it works as expected.
I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:
https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.html
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 7508338ff3)
It is possible to deadlock libvirt by having a domain with XML
longer than PIPE_BUF, and by writing a hook script that closes
stdin early. This is because libvirt was keeping a copy of the
child's stdin read fd open, which means the write fd in the
parent will never see EPIPE (remember, libvirt should always be
run with SIGPIPE ignored, so we should never get a SIGPIPE signal).
Since there is no error, libvirt blocks waiting for a write to
complete, even though the only reader is also libvirt. The
solution is to ensure that only the child can act as a reader
before the parent does any writes; and then dealing with the
fallout of dealing with EPIPE.
Thankfully, this is not a security hole - since the only way to
trigger the deadlock is to install a custom hook script, anyone
that already has privileges to install a hook script already has
privileges to do any number of other equally disruptive things
to libvirt; it would only be a security hole if an unprivileged
user could install a hook script to DoS a privileged user.
* src/util/command.c (virCommandRun): Close parent's copy of child
read fd earlier.
(virCommandProcessIO): Don't let EPIPE be fatal; the child may
be done parsing input.
* tests/commandhelper.c (main): Set up a SIGPIPE situation.
* tests/commandtest.c (test20): Trigger it.
* tests/commanddata/test20.log: New file.
(cherry picked from commit 858c2476d9)
The stream lock is unlocked twice instead of being locked and then
unlocked. Probably a typo.
(cherry picked from commit 107f51b69c)
Conflicts:
AUTHORS
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=827519
The problem is that an interface with type='hostdev' will have an
alias of the form "hostdev%d", while the function that looks through
existing netdevs to determine the name to use for a new addition will
fail if there's an existing entry that does not match the form
"net%d".
This is another of the handful of places that need an exception due to
the hybrid nature of <interface type='hostdev'> (which is not exactly
an <interface> or a <hostdev>, but is both at the same time).
(cherry picked from commit 6734ce7bc8)
If we migrate to fd, spec->fwdType is not MIGRATION_FWD_DIRECT,
we will close spec->dest.fd.local in qemuMigrationRun(). So we
should set spec->dest.fd.local to -1 in qemuMigrationRun().
Bug present since 0.9.5 (commit 326176179).
(cherry picked from commit b19c236d69)
We should not set *outfd or *errfd if virExecWithHook() failed
because the caller may close these fds.
Bug present since v0.4.5 (commit 60ed1d2a).
(cherry picked from commit 746ff701e8)
Wen Congyang reported that we have a double-close bug if we fail
virFDStreamOpenInternal, since childfd duplicated one of the fds[]
array contents. In truth, since we always transfer both members
of fds to other variables, we should close the fds through those
other names, and just use fds[] for pipe().
Bug present since 0.9.0 (commit e886237a).
* src/fdstream.c (virFDStreamOpenFileInternal): Swap scope of
childfd and fds[], to avoid a double close.
(cherry picked from commit f3cfc7c884)
KAMEZAWA Hiroyuki reported a nasty double-free bug when virCommand
is used to convert a string into input to a child command. The
problem is that the poll() loop of virCommandProcessIO would close()
the write end of the pipe in order to let the child see EOF, then
the caller virCommandRun() would also close the same fd number, with
the second close possibly nuking an fd opened by some other thread
in the meantime. This in turn can have all sorts of bad effects.
The bug has been present since the introduction of virCommand in
commit f16ad06f.
This is based on his first attempt at a patch, at
https://bugzilla.redhat.com/show_bug.cgi?id=823716
* src/util/command.c (_virCommand): Drop inpipe member.
(virCommandProcessIO): Add argument, to avoid closing caller's fd
without informing caller.
(virCommandRun, virCommandNewArgs): Adjust clients.
(cherry picked from commit da831afcf2)
Currently, we are logging only one side of pipes we
create in virCommandRequireHandshake(); This is enough
in cases where pipe2() returns two consecutive FDs. However,
it is not guaranteed and it may return any FDs.
Therefore, it's wise to log the other ends as well.
(cherry picked from commit 7454849ec5)
When getting number of CPUs the host has assigned, there was always
number "1" returned. Even though all lxc domains with no pinning
launched by libvirt run on all pCPUs (by default, no matter what's the
number), we should at least return the same number as the user
specified when creating the domain.
(cherry picked from commit 87dfdb0b92)
==3240== 23 bytes in 1 blocks are definitely lost in loss record 242 of 744
==3240== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==3240== by 0x8077537: __vasprintf_chk (vasprintf_chk.c:82)
==3240== by 0x509C677: virVasprintf (stdio2.h:199)
==3240== by 0x509C733: virAsprintf (util.c:1912)
==3240== by 0x1906583A: qemudStartup (qemu_driver.c:679)
==3240== by 0x511991D: virStateInitialize (libvirt.c:809)
==3240== by 0x40CD84: daemonRunStateInit (libvirtd.c:751)
==3240== by 0x5098745: virThreadHelper (threads-pthread.c:161)
==3240== by 0x7953D8F: start_thread (pthread_create.c:309)
==3240== by 0x805FF5C: clone (clone.S:115)
(cherry picked from commit 67dd486f20)
Currently all the config options are listed under a 'vnc_entry'
group. Create a bunch of new groups & move options to the
right place
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 6c10c04c39)
Add nmissing 'host_uuid' entry to libvirtd.conf lens and
rename spice_passwd to spice_password in qemu.conf lens
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit a9c779caf3)
Instead of doing
# example_config
use
#example_config
so it is possible to programatically uncomment example config
options, as distinct from their comment/descriptions
Also delete rogue trailing comma not allowed by lens
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit c5c3278e9b)
(crobinso: Fix spacing to appease tests/daemon-conf, which is
still in -maint branch)
When you try to connect to a socket in the abstract namespace,
the error will be ECONNREFUSED for a non-listening daemon. With
the non-abstract namespace though, you instead get ENOENT. Add
a check for this extra errno when auto-spawning the daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 54c4d9d90b)
Remove a number of pointless checks against PATH_MAX and
add a syntax-check rule to prevent its use in future
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit ebbcc02639)
If vdsm is installed and configured in Fedora 17, we add the following
items into qemu.conf:
spice_tls=1
spice_tls_x509_cert_dir="/etc/pki/vdsm/libvirt-spice"
However, after this changes, augtool cannot identify qemu.conf anymore.
(cherry picked from commit cdd762e425)
The libvirt_private.syms file exports virNetlinkEventServiceLocalPid
so there needs to be a no-op stub for Win32 to avoid linker errors
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 2d191e8e27)
This reverts commit b1e374a7ac, which was
rather bad since I failed to consider all sides of the issue. The main
things I didn't consider properly are:
- a thread which sends a non-blocking call waits for the thread with
the buck to process the call
- the code doesn't expect non-blocking calls to remain in the queue
unless they were already partially sent
Thus, the reverted patch actually breaks more than what it fixes and
clients (which may even be libvirtd during p2p migrations) will likely
end up in a deadlock.
(cherry picked from commit 63643f67ab)
The pciDevice structure corresponding to the device being hot-unplugged
was freed after it was "stolen" from activeList. The pointer was still
used for eg-inactive list. This patch removes the free of the structure
and frees it only if reset fails on the device.
(cherry picked from commit db19417fc0)
The previous commit (2cb0899) left a dead variable behind.
* src/libxl/libxl_driver.c (libxlClose): Drop dead variable.
(cherry picked from commit b8e6021e7b)
When the last reference to a virConnectPtr is released by
libvirtd, it was possible for a deadlock to occur in the
virDomainEventState functions. The virDomainEventStatePtr
holds a reference on virConnectPtr for each registered
callback. When removing a callback, the virUnrefConnect
function is run. If this causes the last reference on the
virConnectPtr to be released, then virReleaseConnect can
be run, which in turns calls qemudClose. This function has
a call to virDomainEventStateDeregisterConn which is intended
to remove all callbacks associated with the virConnectPtr
instance. This will try to grab a lock on virDomainEventState
but this lock is already held. Deadlock ensues
Thread 1 (Thread 0x7fcbb526a840 (LWP 23185)):
Since each callback associated with a virConnectPtr holds a
reference on virConnectPtr, it is impossible for the qemudClose
method to be invoked while any callbacks are still registered.
Thus the call to virDomainEventStateDeregisterConn must in fact
be a no-op. Thus it is possible to just remove all trace of
virDomainEventStateDeregisterConn and avoid the deadlock.
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Delete virDomainEventStateDeregisterConn
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
src/qemu/qemu_driver.c, src/uml/uml_driver.c: Remove
calls to virDomainEventStateDeregisterConn
(cherry picked from commit 2cb0899eec)
We were being lazy - virnetlink.c was getting uint32_t as a
side-effect from glibc 2.14's <unistd.h>, but older glibc 2.11
does not provide uint32_t from <unistd.h>. In fact, POSIX states
that <unistd.h> need only provide intptr_t, not all of <stdint.h>,
so the bug really is ours. Reported by Jonathan Alescio.
* src/util/virnetlink.h: Include <stdint.h>.
(cherry picked from commit e8314e78f9)
If qemuPrepareHostdevUSBDevices fail it will roll back devices added
to the driver list of used devices. However, if it may fail because
the device is being used already. But then again - with roll back.
Therefore don't try to remove a usb device manually if the function
fail. Although, we want to remove the device if any operation
performed afterwards fail.
(cherry picked from commit 9c484e3dc5)
One of our latest USB device handling patches
05abd1507d introduced a regression.
That is, we first create a temporary list of all USB devices that
are to be used by domain just starting up. Then we iterate over and
check if a device from the list is in the global list of currently
assigned devices (activeUsbHostdevs). If not, we add it there and
continue with next iteration then. But if a device from temporary
list is either taken already or adding to the activeUsbHostdevs fails,
we remove all devices in temp list from the activeUsbHostdevs list.
Therefore, if a device is already taken we remove it from
activeUsbHostdevs even if we should not. Thus, next time we allow
the device to be assigned to another domain.
(cherry picked from commit 2f5fdc886e)
The uhci1, uhci2, uhci3 companion controllers for ehci1 must
have a master start port set. Since this value is predictable
we should set it automatically if the app does not supply it
(cherry picked from commit 03b804a200)
(crobinso: Drop an element that wasn't backported to -maint branch.)
Currently each USB2 companion controller gets put on a separate
PCI slot. Not only is this wasteful of PCI slots, but it is not
in compliance with the spec for USB2 controllers. The master
echi1 and all companion controllers should be in the same slot,
with echi1 in function 7, and uhci1-3 in functions 0-2 respectively.
* src/qemu/qemu_command.c: Special case handling of USB2 controllers
to apply correct pci slot assignment
* tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args,
tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.xml: Expand
test to cover automatic slot assignment
(cherry picked from commit 1ebd52cb87)
Conflicts:
tests/qemuxml2xmltest.c
The virDomainDeviceInfoIsSet API was only checking if an
address or alias was set in the struct. Thus if only a
rom bar setting / filename, boot index, or USB master
value was set, they could be accidentally dropped when
formatting XML
(cherry picked from commit 2c195fdbf3)
Sometimes it is useful to see the callpath for log messages.
This change enhances the log filter syntax so that stack traces
can be show by setting '1:+NAME' instead of '1:NAME'.
This results in output like:
2012-05-09 14:18:45.136+0000: 13314: debug : virInitialize:414 : register drivers
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xd6)[0x7f89188ebe86]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]
2012-05-09 14:18:45.136+0000: 13314: debug : virRegisterDriver:775 : driver=0x7f8918d02760 name=Test
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virRegisterDriver+0x6b)[0x7f89188ec717]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(+0x11b3ad)[0x7f891891e3ad]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xf3)[0x7f89188ebea3]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]
* docs/logging.html.in: Document new syntax
* configure.ac: Check for execinfo.h
* src/util/logging.c, src/util/logging.h: Add support for
stack traces
* tests/testutils.c: Adapt to API change
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 548563956e)
On some of the NUMA platforms, the CPU index in each NUMA node
grows non-consecutive. While on other platforms, it can be inconsecutive,
E.g.
% numactl --hardware
available: 4 nodes (0-3)
node 0 cpus: 0 4 8 12 16 20 24 28
node 0 size: 131058 MB
node 0 free: 86531 MB
node 1 cpus: 1 5 9 13 17 21 25 29
node 1 size: 131072 MB
node 1 free: 127070 MB
node 2 cpus: 2 6 10 14 18 22 26 30
node 2 size: 131072 MB
node 2 free: 127758 MB
node 3 cpus: 3 7 11 15 19 23 27 31
node 3 size: 131072 MB
node 3 free: 127226 MB
node distances:
node 0 1 2 3
0: 10 20 20 20
1: 20 10 20 20
2: 20 20 10 20
3: 20 20 20 10
This patch is to fix the problem by using the CPU index in
caps->host.numaCell[i]->cpus[i] to set the bitmask instead of
assuming the CPU index of the NUMA nodes are always sequential.
(cherry picked from commit d1bdeca875)
For pseries guest, the default controller model is
ibmvscsi controller, this controller only can work
on spapr-vio address.
This patch is to assign spapr-vio address type to
ibmvscsi controller and correct vscsi test case.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
(cherry picked from commit bb725ac1fa)
