Return NULL right away in qemuBlockStorageSourceGetBackendProps when an
invalid storage source is presented so that virJSONValueObjectAdd isn't
called with a NULL argument.
Found by coverity.
https://bugzilla.redhat.com/show_bug.cgi?id=1434451
When testing user aliases it was discovered that for 440fx
machine type which has default IDE bus builtin, domain cannot
start if IDE controller has the user provided alias. This is
because for 440fx we don't put the IDE controller onto the
command line (since it is builtin) and therefore any device that
is plugged onto the bus must use the default alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In 4f15707202 I've tried to make duplicates detection for
nested /dev mount better. However, I've missed the obvious case
when there are two same mount points. For instance if:
# mount --bind /dev/blah /dev/blah
# mount --bind /dev/blah /dev/blah
Yeah, very unlikely (in qemu driver world) but possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In some cases management application needs to allocate memory for
qemu upfront and then just let qemu use that. Since we don't want
to expose path for memory-backend-file anywhere in the domain
XML, we can generate predictable paths. In this case:
$memoryBackingDir/libvirt/qemu/$shortName/$alias
where $shortName is result of virDomainDefGetShortName().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When removing path where huge pages are call virFileDeleteTree
instead of plain rmdir(). The reason is that in the near future
there's going to be more in the path than just files - some
subdirs. Therefore plain rmdir() is not going to be enough.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
At the same time, move its internals into a separate function so
that they can be reused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Very soon qemuBuildMemoryBackendStr() is going to use memory cell
aliases. Therefore set one. At the same time, move it a bit
further - if virAsprintf() fails, there's no point in setting
rest of the members.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Libvirt historically stores storage source path including the volume as
one string in the XML, but that is not really flexible enough when
dealing with the fields in the code. Previously we'd store the slash
separating the two as part of the image name. This was fine for gluster
but it's not necessary and does not scale well when converting other
protocols.
Don't store the slash as part of the path. The resulting change from
absolute to relative path within the gluster driver should be okay,
as the root directory is the default when accessing gluster.
Extract the part formatting the basic URI part so that it can be reused
to format JSON backing definitions. Parts specific to the command line
format will remain in qemuBuildNetworkDriveURI. The new function is
called qemuBlockStorageSourceGetURI.
Original implementation used 'SocketAddress' equivalent from qemu for
the disk server field, while qemu documentation specifies
'InetSocketAddress'. The backing store parser uses the correct parsing
function but the formatter used the incorrect one (and also with the
legacy mode enabled which was wrong).
To allow merging this with other disk type checks we need to check
qemuCaps only when available, since some of the checks are executed on
disk cold-plug and thus capabilities should not be checked.
Make the checks optional by making them conditional on qemuCaps not
being NULL.
All of the error message are already in a conditional block with known
bus type. Inline the bus type rather than formatting it from a separate
variable.
The disk index validation is used only in very specific cases and does
not need to be performed otherwise. Move it out of the global check into
the usage place.
busid and unitid are ever used only if the device is an SD card due to
the check in qemuDiskBusNeedsDeviceArg. Since the SD card does not have
an bus or unit number, most of the code and command line formatter can
be removed since it will never be used.
In near future we will need more than just a plain VIR_STRDUP().
Better implement that in a separate function and in
qemuBuildMemoryBackendStr() which is complicated enough already.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This function works over domain definition and not domain object.
Its name is thus misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When a user provides the backing chain, we will not need to re-detect
all the backing stores again, but should move to the end of the user
specified chain. Additionally if a user provides a full terminated chain
we should not attempt any further detection.
Separate it so that it deals only with single virStorageSource, so that
it can later be reused for full backing chain support.
Two aliases are passed since authentication is more relevant to the
'storage backend' whereas encryption is more relevant to the protocol
layer. When using node names, the aliases will be different.
qemuDomainGetImageIds and qemuDomainStorageFileInit are helpful when
trying to access a virStorageSource from the qemu driver since they
figure out the correct uid and gid for the image.
When accessing members of a backing chain the permissions for the top
level would be used. To allow using specific permissions per backing
chain level but still allow inheritance from the parent of the chain we
need to add a new parameter to the image ID APIs.
We handle incremental storage migration in a different way. The support
for this new (as of QEMU 2.10) parameter is only needed for full
coverage of migration parameters used by QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support several ways of setting migration bandwidth and this
is not adding another one. With this patch we are able to read and write
this parameter using query-migrate-parameters and migrate-set-parameters
in one call with all other parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The parameters used "migrate" prefix which is pretty redundant and
qemuMonitorMigrationParams structure is our internal representation of
QEMU migration parameters and it is supposed to use names which match
QEMU names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support setting the maximum downtime with a dedicated
virDomainMigrateSetMaxDowntime API. This patch does not implement
another way of setting the downtime by adding a new public migration
parameter. It just makes sure any parameter we are able to get from a
QEMU monitor by query-migrate-parameters can be passed back to QEMU via
migrate-set-parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The check can be easily replaced with a simple test in the JSON
implementation and we don't need to update it every time a new parameter
is added.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The macro (now called PARSE_SET) is now usable for any type which needs
a *_set bool for indicating a valid value.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For instance, NET_TYPE_MCAST doesn't support setting QoS. Instead
of claiming success and doing nothing, we should be explicit
about that and report an error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Don't leak @blockNodes in the loop.
==226576== 7,120 bytes in 60 blocks are definitely lost in loss record 122 of 125
==226576== at 0x4835214: calloc (vg_replace_malloc.c:711)
==226576== by 0x4950D7B: virAllocN (viralloc.c:191)
==226576== by 0x49EB5BB: virXPathNodeSet (virxml.c:676)
==226576== by 0x104DB67: virQEMUCapsLoadCPUModels (qemu_capabilities.c:3738)
==226576== by 0x105510D: virQEMUCapsLoadCache (qemu_capabilities.c:3929)
==226576== by 0x104459F: qemuTestParseCapabilities (testutilsqemu.c:498)
==226576== by 0x1040DC9: testQemuCapsCopy (qemucapabilitiestest.c:105)
==226576== by 0x1041F07: virTestRun (testutils.c:180)
==226576== by 0x1040B45: mymain (qemucapabilitiestest.c:181)
==226576== by 0x104320F: virTestMain (testutils.c:1119)
==226576== by 0x1041149: main (qemucapabilitiestest.c:193)
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU identified a race condition between the device state serialization
and the end of storage migration. Both QEMU and libvirt needs to be
updated to fix this.
Our migration work flow is modified so that after starting the migration
we to wait for QEMU to enter "pre-switchover", "postcopy-active", or
"completed" state. Once there, we cancel all block jobs as usual. But if
QEMU is in "pre-switchover", we need to resume the migration afterwards
and wait again for the real end (either "postcopy-active" or
"completed" state).
Old QEMU will just enter either "postcopy-active" or "completed"
directly, which is still correctly handled even by new libvirt. The
"pre-switchover" state will only be entered if QEMU supports it and the
pause-before-switchover capability was enabled. Thus all combinations of
libvirt and QEMU will work, but only new QEMU with new libvirt will
avoid the race condition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This new capability enables a pause before device state serialization so
that we can finish all block jobs without racing with the end of the
migration. The pause is indicated by "pre-switchover" state. Once we're
done QEMU enters "device" migration state.
This patch just defines the new capability and QEMU migration states and
their mapping to our job states.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When starting a domain with managed save image, we try to restore it
first. If the image is corrupted, we silently unlink it and just
normally start the domain. At this point the domain has no managed save
image, yet we did not reset the hasManagedSave flag.
https://bugzilla.redhat.com/show_bug.cgi?id=1460962
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of enumerating all states which need to be turned into
QEMU_DOMAIN_JOB_STATUS_FAILED (and failing to add all of them), it's
better to mention just the one which needs to be left alone.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Almost every failure in qemuMigrationRun while we are talking to QEMU
monitor results in a jump to exit_monitor label. The only exception is
removed by this patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The "ret" variable is used for storing the return value of a function
and should not be used as a temporary variable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Merge cancel and cancelPostCopy sections with the generic error section,
where we can easily decide whether canceling the ongoing migration is
required.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let cleanup only do things common to both failure and success paths and
move error handling code inside the new "error" section.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some code which was supposed to be executed only when migration
succeeded was buried inside the cleanup code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When adding a new job state it's useful to let the compiler complain
about places where we need to think about what to do with the new
state.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since we will be allowing users to set device aliases and memory
devices are fragile when it comes to aliases we have to make sure
they won't change during migration. Other devices should be fine.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
They have to be unique within the domain. As usual, backwards
compatibility takes its price. In this particular situation we
have a device that is represented twice in a domain and so is its
alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When assigning alias to a device we usually iterate over other
devices of its kind trying to find next index. We do this by
stripping down the prefix and then parsing number at the end,
Usually, if the prefix doesn't match the one we are expecting, we
just continue with next iteration. Except for couple of
functions: qemuGetNextChrDevIndex(),
qemuAssignDeviceRedirdevAlias() and qemuAssignDeviceShmemAlias().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The only remaining user of qemuMonitorGetMigrationCapability is our test
suite. Let's replace qemuMonitorGetMigrationCapability with
qemuMonitorGetMigrationCapabilities there and drop the unused function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All calls to qemuMonitorGetMigrationCapability in QEMU driver are
replaced with qemuMigrationCapsGet.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Each time we need to check whether a given migration capability is
supported by QEMU, we call query-migrate-capabilities QMP command and
lookup the capability in the returned list. Asking for the list of
supported capabilities once when we connect to QEMU and storing the
result in a bitmap is much better and we don't need to enter a monitor
just to check whether a migration capability is supported.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The new function is called qemuProcessInitMonitor and it will enter/exit
the monitor so that the caller doesn't have to deal with this.
The goal of this patch is to simplify the code in qemuConnectMonitor
which would otherwise be a bit hairy after the following patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since the encryption information can also be disk source specific
move it from qemuDomainDiskPrivate to qemuDomainStorageSourcePrivate
Since the last allocated element from qemuDomainDiskPrivate is
removed, that means we no longer need qemuDomainDiskPrivateDispose.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since the secret information is really virStorageSource specific
piece of data, let's manage the privateData from there instead of
at the Disk level.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add the object definition and helpers to store security-related private
data for virStorageSources.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When commit id 'da86c6c22' added support for diskPriv->encinfo in
qemuDomainSecretDiskPrepare a change to qemuDomainSecretDiskDestroy
to was missed. Although qemuDomainDiskPrivateDispose probably would
do the trick.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1495511
When creating new /dev for domain ran in namespace we try to
preserve all sub-mounts of /dev. Well, not quite all. For
instance if /dev/foo/bar and /dev/foo are both mount points, only
/dev/foo needs preserving. /dev/foo/bar is preserved with it too.
Now, to identify such cases like this one STRPREFIX() is used.
That is not good enough. While it works for [/dev/foo/bar;
/dev/foo] case, it fails for [/dev/prefix; /dev/prefix2] where
the strings share the same prefix but are in fact two different
paths. The solution is to use STRSKIP().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's move all the virAsprintf()-s into separate functions for
better structure of the code. Later, when somebody wants to
generate a device alias, all they need is to expose the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have a special function for assigning aliases to RNG devices.
Use that instead of plain virAsprintf().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Back in the times of using 'pci_del', unplugging a device without
a PCI address was not wired up.
After completely removing support for qemu without QEMU_CAPS_DEVICE,
aliases are used to uniquely identify devices in all cases.
Remove the pointless validation of data that was already present
in the domain definition.
There are two more cases where we set an S390/CCW/PCI address
type based on the machine type.
Reuse qemuDomainEnsureVirtioAddress to reduce repetition.
Split out the common code responsible for reserving/assigning
PCI/CCW addresses for virtio disks into a helper function
for reuse by other virtio devices.
We pass the source.file to qemuCheckCCWS390AddressSupport for
the purpose of reporting an error message without actually checking
that the rng device is of type VIR_DOMAIN_RNG_BACKEND_RANDOM.
Change it to a hardcoded "rng" string, which also avoids
referring to the device by a host-side attribute.
There is one limitation for using this API, when the guest is started
with all actions set to "destroy" we put "-no-reboot" on the QEMU
command line. That cannot be changed while QEMU is running and
the QEMU process is always terminated no matter what is configured
for any action.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1460677
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to send allowReboot in the migration cookie to ensure the same
behavior of the virDomainSetLifecycleAction() API on the destination.
Consider this scenario:
1. On the source the domain is started with:
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
2. User calls an API to set "destroy" for <on_reboot>:
<on_poweroff>destroy</on_poweroff>
<on_reboot>destroy</on_reboot>
<on_crash>destroy</on_crash>
3. The guest is migrated to a different host
4a. Without the allowReboot in the migration cookie the QEMU
process on destination would be started with -no-reboot
which would prevent using the virDomainSetLifecycleAction() API
for the rest of the guest lifetime.
4b. With the allowReboot in the migration cookie the QEMU process
on destination is started without -no-reboot like it was started
on the source host and the virDomainSetLifecycleAction() API
continues to work.
The following patch adds a QEMU implementation of the
virDomainSetLifecycleAction() API and that implementation disallows
using the API if all actions are set to "destroy" because we add
"-no-reboot" on the QEMU command line. Changing the lifecycle action
is in this case pointless because the QEMU process is always terminated.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will be used later on in implementation of new API
virDomainSetLifecycleAction(). In order to use it, we need to store
the value in status XML to not lose the information if libvirtd is
restarted.
If some guest was started by old libvirt where it was not possible
to change the lifecycle action for running guest, we can safely
detect it based on the current actions from the status XML.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
