Extracting the code logic for opening and parsing a test image from
testDomainRestoreFlags into a separate function, allows us to reuse this
code in other functions such as testDomainSaveImageGetXMLDesc.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extracting the code logic for writing a test image to disk from
testDomainSaveFlags into a separate function, allows us to reuse this
code in other functions such as testDomainSaveImageDefineXML.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Validate @keycodes before successfully returning. Since this is test
driver, @holdtime is being unused here.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Begins by writing a @start byte in the first position of @buffer and
then for every next byte it stores the value of its previous one
incremented by one.
Behaves the same for both supported flags.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Ignore @source in the case of the test driver and return fixed private
IPv4 addresses for all the interfaces defined in the domain.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Return the number of disks present in the configuration of the test
domain when called with @errors as NULL and @maxerrors as 0.
Otherwise report an error for every second disk, assigning available
error codes in a cyclic order.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This brings about a couple of benefits:
- use of VIR_AUTOUNREF() simplifies several callers
- Fixes a todo about virDomainMomentObjList not being polymorphic enough
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
VIR_CLASS_NEW insists that descendents of virObject have 'parent' as
the name of their inherited base class member at offset 0. While it
would be possible to write a new class-creation macro that takes the
actual field name 'current', and rewrite VIR_CLASS_NEW to call the new
macro with the hard-coded name 'parent', it seems less confusing if
all object code uses similar naming. Thus, this is a mechanical rename
in preparation of making virDomainSnapshotDef a descendent of
virObject.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
VIR_CLASS_NEW insists that descendents of virObject have 'parent' as
the name of their inherited base class member at offset 0. While it
would be possible to write a new class-creation macro that takes the
actual field name, and rewrite VIR_CLASS_NEW to call the new macro
with the hard-coded name 'parent', so that we could make
virDomainMomentDef use a custom name for its base class, it seems less
confusing if all object code uses similar naming. Thus, this is a
mechanical rename in preparation of making virDomainSnapshotDef a
descendent of virObject, when we can no longer use 'parent' for a
different purpose than the base class.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Implement testDomainGetTime by returning a fixed timestamp.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Match the XML feature usage of the qemu driver, so the test driver
doesn't reject things like <os firmware='efi'/>.
Particularly VIR_DOMAIN_DEF_FEATURE_NET_MODEL_STRING is needed to
prevent regressions for test suite users with net model strings that
aren't in the virDomainNetModel enum yet
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Vim has trouble figuring out the filetype automatically because
the name doesn't follow existing conventions; annotations like
the ones we already have in Makefile.ci help it out.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemu driver already had a full-blown virDomainMomentObjPtr to
check against, and the test driver ought to have one since we get
better error checking that the user passed in a valid object. Removes
the need for a helper function added in commit commit 4819f54b.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the core of SnapshotObj is agnostic to snapshots and can be
shared with upcoming checkpoint code, it is time to rename the struct
and the functions specific to list operations. A later patch will
shuffle which file holds the common code. This is a fairly mechanical
patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Another step towards making the object list reusable for both
snapshots and checkpoints: the list code only ever needs items that
are in the common virDomainMomentDef base type. This undoes a lot of
the churn in accessing common members added in the previous patch, and
the bulk of the patch is mechanical. But there was one spot where I
had to unroll a VIR_STEAL_PTR to work around changed types.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Pull out the common parts of virDomainSnapshotDef that will be reused
for virDomainCheckpointDef into a new base class. Adjust all callers
that use the direct fields (some of it is churn that disappears when
the next patch refactors virDomainSnapshotObj; oh well...).
Someday, I hope to switch this type to be a subclass of virObject, but
that requires a more thorough audit of cleanup paths, and besides
minimal incremental changes are easier to review.
As for the choice of naming:
I promised my teenage daughter Evelyn that I'd give her credit for her
contribution to this commit. I asked her "What would be a good name
for a base class for DomainSnapshot and DomainCheckpoint". After
explaining what a base class was (using the classic OOB Square and
Circle inherit from Shape), she came up with "DomainMoment", which is
way better than my initial thought of "DomainPointInTime" or
"DomainPIT".
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than allowing a leaky abstraction where multiple drivers have
to open-code operations that update the relations in a
virDomainSnapshotObjList, it is better to add accessor functions so
that updates to relations are maintained closer to the internals.
This patch finishes the job started in the previous patch, by getting
rid of all direct access to nchildren, first_child, or sibling outside
of the lowest level functions, making it easier to refactor later on.
The lone new caller to virDomainSnapshotObjListSize() checks for a
return != 0, because it wants to handles errors (-1, only possible if
the hash table wasn't allocated) and existing snapshots (> 0) in the
same manner; we can drop the check for a current snapshot on the
grounds that there shouldn't be one if there are no snapshots.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than allowing a leaky abstraction where multiple drivers have
to open-code operations that update the relations in a
virDomainSnapshotObjList, it is better to add accessor functions so
that updates to relations are maintained closer to the internals.
This patch starts the task with a single new function:
virDomainSnapshotMoveChildren(). The logic might not be immediately
obvious [okay, that's an understatement - the existing code uses black
magic ;-)], so here's an overview: The old code has an implicit for
loop around each call to qemuDomainSnapshotReparentChildren() by using
virDomainSnapshotForEachChild() (you'll need a wider context than
git's default of 3 lines to see that); the new code has a more visible
for loop. Then it helps if you realize that the code is making two
separate changes to each child object: STRDUP of the new parent name
prior to writing XML files (unchanged), and touching up the pointer to
the parent object (refactored); the end result is the same whether a
single pass made both changes (both in driver code), or whether it is
split into two passes making one change each (one in driver code, the
other in the new accessor).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It is easier to track the current snapshot as part of the list of
snapshots. In particular, doing so lets us guarantee that the current
snapshot is cleared if that snapshot is removed from the list (rather
than depending on the caller to do so, and risking a use-after-free
problem, such as the one recently patched in 1db9d0efbf). This
requires the addition of several new accessor functions, as well as a
useful return type for virDomainSnapshotObjListRemove(). A few error
handling sites that were previously setting vm->current_snapshot =
NULL can now be dropped, because the previous function call has now
done it already. Also, qemuDomainRevertToSnapshot() was setting the
current vm twice, so keep only the one used on the success path.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The only use for the 'current' member of virDomainSnapshotDef was with
the PARSE/FORMAT_INTERNAL flag for controlling an internal-use
<active> element marking whether a particular snapshot definition was
current, and even then, only by the qemu driver on output, and by qemu
and test driver on input. But this duplicates vm->snapshot_current,
and gets in the way of potential simplifications to have qemu store a
single file for all snapshots rather than one file per snapshot. Get
rid of the member by adding a bool* parameter during parse (ignored if
the PARSE_INTERNAL flag is not set), and by adding a new flag during
format (if FORMAT_INTERNAL is set, the value printed in <active>
depends on the new FORMAT_CURRENT).
Then update the qemu driver accordingly, which involves hoisting
assignments to vm->current_snapshot to occur prior to any point where
a snapshot XML file is written (although qemu kept
vm->current_snapshot and snapshot->def_current in sync by the end of
the function, they were not always identical in the middle of
functions, so the shuffling gets a bit interesting). Later patches
will clean up some of that confusing churn to vm->current_snapshot.
Note: even if later patches refactor qemu to no longer use
FORMAT_INTERNAL for output (by storing bulk snapshot XML instead), we
will always need PARSE_INTERNAL for input (because on upgrade, a new
libvirt still has to parse XML left from a previous libvirt).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The following virsh command was triggering a use-after-free:
$ virsh -c test:///default '
snapshot-create-as test s1
snapshot-create-as test s2
snapshot-delete --children-only test s1
snapshot-current --name test'
Domain snapshot s1 created
Domain snapshot s2 created
Domain snapshot s1 children deleted
error: name in virGetDomainSnapshot must not be NULL
I got lucky on that run - although the error message is quite
unexpected. On other runs, I was able to get a core dump, and
valgrind confirms there is a definitive problem.
The culprit? We were inconsistent about whether we set
vm->current_snapshot, snap->def->current, or both when updating how
the current snapshot was being tracked. As a result, deletion did not
see that snapshot s2 was previously current, and failed to update
vm->current_snapshot, so that the next API using the current snapshot
failed because it referenced stale memory for the now-gone s2 (instead
of the intended s1).
The test driver code was copied from the qemu code (which DOES track
both pieces of state everywhere), but was purposefully simplified
because the test driver does not have to write persistent snapshot
state to the file system. But when you realize that the only reason
snap->def->current needs to exist is when writing out one file per
snapshot for qemu, it's just as easy to state that the test driver
never has to mess with the field (rather than chasing down which
places forgot to set the field), and have vm->current_snapshot be the
sole source of truth in the test driver.
Ideally, I'd get rid of the 'current' member in virDomainSnapshotDef,
as well as the 'current_snapshot' member in virDomainDef, and instead
track the current member in virDomainSnapshotObjList, coupled with
writing ALL snapshot state for qemu in a single file (where I can use
<snapshots current='...'> as a wrapper, rather than
VIR_DOMAIN_SNAPSHOT_FORMAT_INTERNAL to output <current>1</current> XML
on a per-snapshot file basis). But that's a bigger change, so for now
I'm just patching things to avoid the test driver segfault.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
snapshot_conf.h was mixing three separate types: the snapshot
definition, the snapshot object, and the snapshot object list.
Separate out the snapshot object list code into its own file, and
update includes for affected clients.
This is just code motion, but done in preparation of sharing a lot of
the object list code with checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fill in a default volume type for every pool type, as reported
by the VolGetInfo API. Now that we cover the whole enum, report
an error for invalid values.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
snapshot_conf does all the hard work, the test driver just has to
accept the new flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virDomainSnapshotDefFormat currently takes two sets of knobs:
an 'unsigned int flags' argument that can currently just be
VIR_DOMAIN_DEF_FORMAT_SECURE, and an 'int internal' argument used as
a bool to determine whether to output an additional element. It
then reuses the 'flags' knob to call into virDomainDefFormatInternal(),
which takes a different set of flags. In fact, prior to commit 0ecd6851
(1.2.12), the 'flags' argument actually took the public
VIR_DOMAIN_XML_SECURE, which was even more confusing. Let's borrow
from the style of that earlier commit, by introducing a function
for translating from the public flags (VIR_DOMAIN_SNAPSHOT_XML_SECURE
was just recently introduced) into a new enum specific to snapshot
formatting, and adjust all callers to use snapshot-specific enum
values when formatting, and where the formatter now uses a new
variable 'domainflags' to make it obvious when we are translating
from snapshot flags back to domain flags. We don't even have to
use the conversion function for drivers that don't accept the
public VIR_DOMAIN_SNAPSHOT_XML_SECURE flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The existing virDomainSnapshotState is a superset of virDomainState,
adding one more state (disk-snapshot) on top of valid domain states.
But as written, the enum cannot be used for gcc validation that all
enum values are covered in a strongly-typed switch condition, because
the enum does not explicitly include the values it is adding to.
Copy the style used in qemu_blockjob.h of creating new enum names
for every inherited value, and update most clients to use the new
enum names anywhere snapshot state is referenced. The exception is
two switch statements in qemu code, which instead gain a fixme
comment about odd type usage (which will be cleaned up in the next
patch). The rest of the patch is fairly mechanical (I actually did
it by temporarily s/state/xstate/ in snapshot_conf.h to let the
compiler find which spots in the code used the field, did the
obvious search and replace in those functions, then undid the rename).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit f609cb85 (0.9.5) introduced virDomainSnapshotGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid. Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the snapshot documentation to declare it as invalid.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; esx and vbox don't support flags;
qemu, test, and vz only support VIR_DOMAIN_XML_SECURE), and it is
unlikely that the domain state saved off during a snapshot creation
needs to be migration-friendly (as the snapshot is not the source of
a migration), it is easier to just define an explicit set of supported
flags directly related to the snapshot API rather than trying to
borrow from domain API, and risking confusion if even more domain
flags are added later (in fact, I have an upcoming patch that plans to
add a new flag to virDomainGetXMLDesc that makes no sense for
snapshots).
There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the reused name).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Many drivers had a comment that they did not validate the incoming
'flags' to virDomainGetXMLDesc() because they were relying on
virDomainDefFormat() to do it instead. This used to be the case
(at least since 461e0f1a and friends in 0.9.4 added unknown flag
checking in general), but regressed in commit 0ecd6851 (1.2.12),
when all of the drivers were changed to pass 'flags' through the
new helper virDomainDefFormatConvertXMLFlags(). Since this helper
silently ignores unknown flags, we need to implement flag checking
in each driver instead.
Annoyingly, this means that any new flag values added will silently
be ignored when targeting an older libvirt, rather than our usual
practice of loudly diagnosing an unsupported flag. Add comments
in domain_conf.[ch] to remind us to be extra vigilant about the
impact when adding flags (a new flag to add data is safe if the
older server omitting the requested data doesn't break things in
the newer client; a new flag to suppress data rather than enhancing
the existing VIR_DOMAIN_XML_SECURE may form a data leak or even a
security hole).
In the qemu driver, there are multiple callers all funnelling to
qemuDomainDefFormatBufInternal(); many of them already validated
flags (and often only a subset of the full set of possible flags),
but for ease of maintenance, we can also check flags at the common
helper function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 390c06b67 added @xml, but it was never used.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than have a need for old_dom_name, let's just VIR_FREE
the old name first, then use VIR_STEAL_PTR to handle the swap
from the old name to the new name.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>). VIR_ONCE_GLOBAL_INIT is almost
exclusively called without an ending semicolon, but let's
standardize on using one like the other macros.
Add a dummy struct definition at the end of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:
@ rule1 @
identifier a, b;
@@
- b = a;
...
- a = NULL;
+ VIR_STEAL_PTR(b, a);
Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In 600462834f we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The test driver state (@testDriver) uses it's own reference counting
and locking implementation. Instead of doing that, convert @testDriver
into a virObjectLockable and use the provided functionalities.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Even though we do some checking it is not as thorough as it
should be. We already have virStoragePoolObjIsDuplicate but the
way we use it is a typical TOCTOU. Imagine two threads trying to
define two pools with the same name but different UUIDs. With the
current code neither of them finds a duplicate and thus proceed
to virStoragePoolObjAssignDef where only names are compared.
Therefore both threads succeed which is obviously wrong.
We should check for duplicates where we care for them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that the virAuthGet*Path API's generate all the error messages
we can remove them from the callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Currently, the functions return a pointer to the
destination buffer on success or NULL on failure.
Not only does this kind of error handling look quite
alien in the context of libvirt, where most functions
return zero on success and a negative int on failure,
but it's also somewhat pointless because unless there's
been a failure the returned pointer will be the same
one passed in by the user, thus offering no additional
value.
Change the functions so that they return an int
instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This adds some generic virinterfaceobj code, roughly matching what
is used by other stateful drivers like network, storage, etc.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add a 'skipUpdateCaps' bool that we set for test_driver.c nodedevs
which will skip accessing host resources via virNodeDeviceUpdateCaps
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
And replace all calls with virObjectEventStateQueue such that:
testObjectEventQueue(privconn, event);
becomes:
virObjectEventStateQueue(privconn->eventState, event);
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When computing a baseline CPU for a specific hypervisor we have to make
sure to include only CPU features supported by the hypervisor. Otherwise
the computed CPU could not be used for starting a new domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This is required for virCPUBaseline to accept a list of guest CPU
definitions since they do not have arch set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
When adding a new object to the domain object list, there should
have been 2 virObjectRef calls made one for each list into which
the object was placed to match the 2 virObjectUnref calls that
would occur during Remove as part of virHashRemoveEntry when
virObjectFreeHashData is called when the element is removed from
the hash table as set up in virDomainObjListNew.
Some drivers (libxl, lxc, qemu, and vz) handled this inconsistency
by calling virObjectRef upon successful return from virDomainObjListAdd
in order to use virDomainObjEndAPI when done with the returned @vm.
While others (bhyve, openvz, test, and vmware) handled this via only
calling virObjectUnlock upon successful return from virDomainObjListAdd.
This patch will "unify" the approach to use virDomainObjEndAPI
for any @vm successfully returned from virDomainObjListAdd.
Because list removal is so tightly coupled with list addition,
this patch fixes the list removal algorithm to return the object
as entered - "locked and reffed". This way, the callers can then
decide how to uniformly handle add/remove success and failure.
This removes the onus on the caller to "specially handle" the
@vm during removal processing.
The Add/Remove logic allows for some logic simplification such
as in libxl where we can Remove the @vm directly rather than
needing to set a @remove_dom boolean and removing after the
libxlDomainObjEndJob completes as the @vm is locked/reffed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
As QEMU driver, test driver does not accept slashes inside domain names.
This commit fixes this problem checking slashes inside the new name when
'domrename' is executed.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rework the code such that virDomainObjListFindByID will always
return a locked/ref counted object so that the callers can
always do the same cleanup logic to call virDomainObjEndAPI.
Makes accessing the objects much more consistent.
NB:
There were 2 callers (lxcDomainLookupByID and qemuDomainLookupByID)
that were already using the ByID name, but not virDomainObjEndAPI -
these were changed as well in this update/patch.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Now that every caller is using virDomainObjListFindByUUIDRef,
let's just remove it and keep the name as virDomainObjListFindByUUID.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
In next patches this name will be needed for a different memeber.
Also, it makes sense to rename the variable because it does not
contain reference to parent device, just its name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid the need for the drivers to explicitly check for a NULL path by
making sure it is at least the empty string.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ensuring that we don't call the virDrvConnectOpen method with a NULL URI
means that the drivers can drop various checks for NULL URIs. These were
not needed anymore since the probe functionality was split
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Declare what URI schemes a driver supports in its virConnectDriver
struct. This allows us to skip trying to open the driver entirely
if the URI scheme doesn't match.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a localOnly flag to the virConnectDriver struct which allows a
driver to indicate whether it is local-only, or permits remote
connections. Stateful drivers running inside libvirtd are generally
local only. This allows us to remote the check for uri->server != NULL
from most drivers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than using virDomainObjListFindByID, let's be more consistent
and return a reffed and locked object. Since we're using the Ref API,
use virDomainObjEndAPI on @dom and not just virObjectUnlock.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Rather than using virDomainObjListFindByUUID, let's be more consistent
and return a reffed and locked object. Since we're using the Ref API,
use virDomainObjEndAPI on @dom and not just virObjectUnlock.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
For all @dom's fetched from a testDomObjFromDomain because
virDomainObjListRemove will return an unlocked domain object
we should relock it prior to the cleanup label which will use
virDomainObjEndAPI which would Unlock and Unref the passed
object (and we should avoid unlocking an unlocked object).
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
In case of an error do the cleanup of the private data of the
connection.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Refactor testConnectClose as it's then obvious that conn->privateData
is set to NULL in all cases. In addition, 'testConnectCloseInternal'
can be better reused.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rename the variable @defaultConn to @defaultPrivconn as it doesn't
point to a default connection but to the private data used for the
shared default connection of the test driver.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Set privateData to NULL also for a connection that uses @defaultConn
as privateData regardless of whether @defaultConn was freed or
not. @defaultConn is shared between multiple connections and it's
ensured that there will be no memory leak by counting references.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The two code paths have some cleanup in common so lets refactor it.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There is no method to rename inactive domains for test driver.
After this patch, we can rename the domains using 'domrename'.
virsh# domrename test anothertest
Domain successfully renamed
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a private storage pool list, we can take the next
step and convert to using objects. In this case, we're going to use
RWLockable objects (just like every other driver) with two hash
tables for lookup by UUID or Name.
Along the way the ForEach and Search API's will be adjusted to use
the related Hash API's and the various FindBy functions altered and
augmented to allow for HashLookup w/ and w/o the pool lock already
taken.
After virStoragePoolObjRemove we will need to virObjectUnref(obj)
after to indicate the caller is "done" with it's reference. The
Unlock occurs during the Remove.
The NumOf, GetNames, and Export functions all have their own callback
functions to return the required data and the FindDuplicate code
can use the HashSearch function callbacks.
Create an API to search through the storage pool objects looking for
a specific truism from a callback API in order to return the specific
storage pool object that is desired.
For now it'll just call the virStoragePoolObjUnlock, but a future
adjustment will do something different. Since the new API will check
for a NULL object before the Unlock call, callers no longer need to
check for NULL before calling.
The virStoragePoolObjUnlock is now private/static to virstorageobj.c
with a short term forward reference.
All APIs which expect a list of CPU models supported by hypervisors were
switched from char **models and int models to just accept a pointer to
virDomainCapsCPUModels object stored in domain capabilities. This avoids
the need to transform virDomainCapsCPUModelsPtr into a NULL-terminated
list of model names and also allows the various cpu driver APIs to
access additional details (such as its usability) about each CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Every caller reports the error themselves. Might as well move it
into the function and thus unify it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In the past we updated host-model CPUs with host CPU data by adding a
model and features, but keeping the host-model mode. And since the CPU
model is not normally formatted for host-model CPU defs, we had to pass
the updateCPU flag to the formatting code to be able to properly output
updated host-model CPUs. Libvirt doesn't do this anymore, host-model
CPUs are turned into custom mode CPUs once updated with host CPU data
and thus there's no reason for keeping the hacks inside CPU XML
formatters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This commit adds new events for two methods and operations: *PoolBuild() and
*PoolDelete(). Using the event-test and the commands set below we have the
following outputs:
$ sudo ./event-test
Registering event callbacks
myStoragePoolEventCallback EVENT: Storage pool test Defined 0
myStoragePoolEventCallback EVENT: Storage pool test Created 0
myStoragePoolEventCallback EVENT: Storage pool test Started 0
myStoragePoolEventCallback EVENT: Storage pool test Stopped 0
myStoragePoolEventCallback EVENT: Storage pool test Deleted 0
myStoragePoolEventCallback EVENT: Storage pool test Undefined 0
Another terminal:
$ sudo virsh pool-define test.xml
Pool test defined from test.xml
$ sudo virsh pool-build test
Pool test built
$ sudo virsh pool-start test
Pool test started
$ sudo virsh pool-destroy test
Pool test destroyed
$ sudo virsh pool-delete test
Pool test deleted
$ sudo virsh pool-undefine test
Pool test has been undefined
This commits can be a solution for RHBZ #1475227.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1475227
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Create/use virStoragePoolObjAddVol in order to add volumes onto list.
Create/use virStoragePoolObjRemoveVol in order to remove volumes from list.
Create/use virStoragePoolObjGetVolumesCount to get count of volumes on list.
For the storage driver, the logic alters when the volumes.obj list grows
to after we've fetched the volobj. This is an optimization of sorts, but
also doesn't "needlessly" grow the volumes.objs list and then just decr
the count if the virGetStorageVol fails.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The implementation of virConnectBaselineCPU may be different for each
hypervisor. Thus it shouldn't really be implmented in the cpu code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
To be consistent with the API definition, use the @maxnames instead
of @nnames when describing/comparing against the maximum names to
be provided for the *ConnectList[Defined]Networks APIs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation to privatize the virNetworkObj - create an accessor function
to get the current @persistent value. Also change the value to a bool rather
than an unsigned int (since that's how it's generated anyway).
Signed-off-by: John Ferlan <jferlan@redhat.com>
In order to privatize the virNetworkObj create accessors in virnetworkobj
in order to handle the get/set of the active value.
Also rather than an unsigned int, convert it to a boolean to match other
drivers representation and the reality of what it is.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for making the object private, create a couple of API's
to get the obj->def & obj->newDef and set the obj->def.
While altering networkxml2conftest.c to use the virNetworkObjSetDef
API, fix the name of the variable from @dev to @def
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since virnodedeviceobj now has a self-lockable hash table, there's no
need to lock the table from the driver for processing. Thus remove the
locks from the driver for NodeDeviceObjList mgmt.
This includes the test driver as well.
Alter the node device deletion logic to make use of the parent field
from the obj->def rather than call virNodeDeviceObjListGetParentHost.
As it turns out the saved @def won't have parent_wwnn/wwpn or
parent_fabric_wwn, so the only logical path would be to call
virNodeDeviceObjListGetParentHostByParent which we can accomplish
directly via virNodeDeviceObjListFindByName.
Alter the virStoragePoolObjNumOfVolumes, virStoragePoolObjVolumeGetNames,
and virStoragePoolObjVolumeListExport APIs to take a virStoragePoolObjPtr
instead of the &obj->volumes and obj->def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have repetitive code - create/use a couple of helpers:
testStoragePoolObjFindActiveByName
testStoragePoolObjFindInactiveByName
This will also allow for the reduction of some cleanup path logic.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rework some of the test driver API's to remove the need to return
failure when testStoragePoolObjFindByName returns NULL rather than
going to cleanup. This removes the need for check for "if (obj)" and in
some instances the need to for a cleanup label and a local ret variable.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Now that we have a bit more control, let's convert our object into
a lockable object and let that magic handle the create and lock/unlock.
This also involves creating a virNodeDeviceEndAPI in order to handle
the object cleanup for API's that use the Add or Find API's in order
to get a locked/reffed object. The EndAPI will unlock and unref the
object returning NULL to indicate to the caller to not use the obj.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Ensure that any function that walks the node device object list is prefixed
by virNodeDeviceObjList.
Also, modify the @filter param name for virNodeDeviceObjListExport to
be @aclfilter.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation to make things private, make the ->devs be pointers to a
virNodeDeviceObjList and then manage everything inside virnodedeviceobj
Signed-off-by: John Ferlan <jferlan@redhat.com>
- In testDestroyVport rather than use a cleanup label, just return -1
immediately since nothing else is needed.
- In testStoragePoolDestroy, if !privpool, then just return -1 since
nothing else will happen anyway.
- Rather than "goto cleanup;" on failure to virNodeDeviceObjFindByName
an @obj, just return directly. This then allows the cleanup: label code
to not have to check "if (obj)" before calling virNodeDeviceObjUnlock.
This also simplifies some exit logic...
- In testNodeDeviceObjFindByName use an error: label to handle the failure
and don't do the ncaps++ within the VIR_STRDUP() source target index.
Only increment ncaps after success. Easier on eyes at error label too.
- In testNodeDeviceDestroy use "cleanup" rather than "out" for the goto
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than passing the object to be removed by reference, pass by value
and then let the caller decide whether or not the object should be free'd
and how to handle the logic afterwards. This includes free'ing the object
and/or setting the local variable to NULL to prevent subsequent unexpected
usage (via something like virNodeDeviceObjRemove in testNodeDeviceDestroy).
For now this function will just handle the remove of the object from the
list for which it was placed during virNodeDeviceObjAssignDef.
This essentially reverts logic from commit id '61148074' that free'd the
device entry on list, set *dev = NULL and returned. Thus fixing a bug in
node_device_hal.c/dev_refresh() which would never call dev_create(udi)
since @dev would have been set to NULL.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If a remote call fails during event registration (more than likely from
a network failure or remote libvirtd restart timed just right), then when
calling the virObjectEventStateDeregisterID we don't want to call the
registered @freecb function because that breaks our contract that we
would only call it after succesfully returning. If the @freecb routine
were called, it could result in a double free from properly coded
applications that free their opaque data on failure to register, as seen
in the following details:
Program terminated with signal 6, Aborted.
#0 0x00007fc45cba15d7 in raise
#1 0x00007fc45cba2cc8 in abort
#2 0x00007fc45cbe12f7 in __libc_message
#3 0x00007fc45cbe86d3 in _int_free
#4 0x00007fc45d8d292c in PyDict_Fini
#5 0x00007fc45d94f46a in Py_Finalize
#6 0x00007fc45d960735 in Py_Main
#7 0x00007fc45cb8daf5 in __libc_start_main
#8 0x0000000000400721 in _start
The double dereference of 'pyobj_cbData' is triggered in the following way:
(1) libvirt_virConnectDomainEventRegisterAny is invoked.
(2) the event is successfully added to the event callback list
(virDomainEventStateRegisterClient in
remoteConnectDomainEventRegisterAny returns 1 which means ok).
(3) when function remoteConnectDomainEventRegisterAny is hit,
network connection disconnected coincidently (or libvirtd is
restarted) in the context of function 'call' then the connection
is lost and the function 'call' failed, the branch
virObjectEventStateDeregisterID is therefore taken.
(4) 'pyobj_conn' is dereferenced the 1st time in
libvirt_virConnectDomainEventFreeFunc.
(5) 'pyobj_cbData' (refered to pyobj_conn) is dereferenced the
2nd time in libvirt_virConnectDomainEventRegisterAny.
(6) the double free error is triggered.
Resolve this by adding a @doFreeCb boolean in order to avoid calling the
freeCb in virObjectEventStateDeregisterID for any remote call failure in
a remoteConnect*EventRegister* API. For remoteConnect*EventDeregister* calls,
the passed value would be true indicating they should run the freecb if it
exists; whereas, it's false for the remote call failure path.
Patch based on the investigation and initial patch posted by
fangying <fangying1@huawei.com>.
virDomainXMLOption gains driver specific callbacks for parsing and
formatting save cookies.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This will be used later when a save cookie will become part of the
snapshot XML using new driver specific parser/formatter functions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we have a bit more control, let's convert our object into
a lockable object and let that magic handle the create and lock/unlock.
This commit also introduces virInterfaceObjEndAPI in order to handle the
lock unlock and object unref in one call for consumers returning a NULL
obj upon return. This removes the need for virInterfaceObj{Lock|Unlock}
external API's.
Signed-off-by: John Ferlan <jferlan@redhat.com>
While checking for ABI stability, drivers might pose additional
checks that are not valid for general case. For instance, qemu
driver might check some memory backing attributes because of how
qemu works. But those attributes may work well in other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In preparation for privatizing the virNodeDeviceObj - create an accessor
for the @def field and then use it for various callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Alter the algorithm to return a list of matching names rather than a
list of match virInterfaceObjPtr which are then just dereferenced
extracting the def->name and def->mac. Since the def->mac would be
the same as the passed @mac, just return a list of names and as long
as there's only one, extract the [0] entry from the passed list.
Also alter the error message on failure to include the mac that wasn't
found.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the structs into virinterfaceobj.c, create necessary accessors, and
initializers.
This also includes reworking virInterfaceObjListClone to handle receiving
a source interfaces list pointer, creating the destination interfaces object,
and copying everything from source into dest.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We're about to make the obj much more private, so make it easier to
see future changes which will require accessors for the obj->def
This also includes modifying some interfaces->objs[i]->X references to be
obj = interfaces->objs[i]; and then def = obj->def
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than using goto cleanup on object find failure and having cleanup
need to check if the obj was present before unlocking, just return immediately.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit 4337bc57be introduced code that would in certain error paths
unref the last reference of a pointer, but return it.
Clear the pointers before returning them.
Commit id '865f479da' altered the logic to use a common test*ObjFindByName
helpers which would lock/unlock the test driver; however, a few cleanup paths
in that cleanup missed removing the Unlock, so remove it now.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use "virNetworkObj" as a prefix for any external API in virnetworkobj.
Also a couple of functions were local to virnetworkobj.c, so remove their
external defs in virnetworkobj.h.
Move all the virNetworkObj related API/data structures into their own
modules virnetworkobj.{c,h} from the network_conf.{c,h}
Purely code motion at this point plus adjustments to cleanly build
Mostly code motion to move storageConnectList[Defined]StoragePools
and similar test driver code into virstorageobj.c and rename to
virStoragePoolObjGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOf[Defined]StoragePools API into virstorageobj.c from
storage_driver and test_driver. The only real difference between the
two is the test driver doesn't call using the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
