This patch adds support for a new <option>-Tag in the <dhcp> block of
network configs, based on a subset of the fifth proposal by Laine
Stump in the mailing list discussion at
https://www.redhat.com/archives/libvir-list/2012-November/msg01054.html.
Any such defined option will result in a dhcp-option=<number>,"<value>"
statement in the generated dnsmasq configuration file.
Currently, DHCP options can be specified by number only and there is
no whitelisting or blacklisting of option numbers, which should
probably be added.
Signed-off-by: Pieter Hollants <pieter@hollants.com>
Signed-off-by: Laine Stump <laine@laine.org>
For both AttachDevice and UpdateDevice APIs, if the disk device
is 'cdrom' or 'floppy', the operations could be ejecting, updating,
and inserting. For either ejecting or updating, the shared disk
entry of the original disk src has to be removed, because it's
not useful anymore.
And since the original disk def will be changed, new disk def passed
as argument will be free'ed in qemuDomainChangeEjectableMedia, so
we need to copy the orignal disk def before
qemuDomainChangeEjectableMedia, to use it for qemuRemoveSharedDisk.
We pass over the address/port start/end values many times so we put
them in structs.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
Let users set the port range to be used for forward mode NAT:
...
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
...
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
Support setting which public ip to use for NAT via attribute
address in subelement <nat> in <forward>:
...
<forward mode='nat'>
<address start='1.2.3.4' end='1.2.3.10'/>
</forward>
...
This will construct an iptables line using:
'-j SNAT --to-source <start>-<end>'
instead of:
'-j MASQUERADE'
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
When removing a VM from the virDomainObjListPtr, we must not
be holding the VM lock while acquiring the list lock. Re-order
code to ensure that we can release the VM lock early.
Add necessary handling code for the new s390 CCW address type to
virDomainDeviceInfo. Further, introduce memory management, XML
parsing, output formatting and range validation for the new
virDomainDeviceCCWAddress type.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Switch virDomainObjList to inherit from virObjectLockable and
make all the APIs acquire/release the mutex when running. This
makes virDomainObjList completely self-locking and no longer
reliant on the hypervisor driver locks
The duplicate VM checking should be done atomically with
virDomainObjListAdd, so shoud not be a separate function.
Instead just use flags to indicate what kind of checks are
required.
This pair, used in virDomainCreateXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainRestoreFlags:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, true)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainDefineXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 0) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
0, NULL)))
goto cleanup;
As a step towards making virDomainObjList thread-safe turn it
into an opaque virObject, preventing any direct access to its
internals.
As part of this a new method virDomainObjListForEach is
introduced to replace all existing usage of virHashForEach
When a disk-only snapshot is requested the domain is treated as if it
was offline. This forbids to mix memory checkpoints with the DISK_ONLY
flag.
This patch improves the error message and mentions the restriction in
the virsh man page.
Commit 60b176c3d0 introduced a bug that
when editing an XML with cputune similar to this:
...
<vcpu placement='static' current='1'>2</vcpu>
<cputune>
<vcpupin vcpu="1" cpuset="0"/>
</cputune>
...
results in formatted XML that looks like this:
...
<vcpu placement='static' current='1'>2</vcpu>
<cputune>
</cputune>
...
That is caused by a condition depending on def->cputune.vcpupin being
set rather than checking def->cputune.nvcpupin. Notice that nvcpupin
can be 0 and vcpupin can still be allocated since it's a pointer to an
array, so no harm done there.
I also changed it on other places in the code where it depended on the
wrong variable.
While working with a pmsuspend vs. snapshot issue, I noticed that
the state file in /var/run/libvirt/qemu/dom.xml contained a rather
suspicious "(null)" string, which does not round-trip well through
a libvirtd restart. Had I been on a platform other than glibc
where printf("%s",NULL) crashes instead of printing (null), we might
have noticed the problem much sooner.
And in fixing that problem, I also noticed that we had several
missing states, because we were #defining several *_LAST names
to a value _different_ than what they were already given as enums
in libvirt.h. Yuck. I got rid of default: labels in the case
statements, because they get in the way of gcc's -Wswitch helping
us ensure we cover all enum values.
* src/conf/domain_conf.c (virDomainStateReasonToString)
(virDomainStateReasonFromString): Fill in missing domain states;
rewrite case statement to let compiler enforce checking.
(VIR_DOMAIN_NOSTATE_LAST, VIR_DOMAIN_RUNNING_LAST)
(VIR_DOMAIN_BLOCKED_LAST, VIR_DOMAIN_PAUSED_LAST)
(VIR_DOMAIN_SHUTDOWN_LAST, VIR_DOMAIN_SHUTOFF_LAST)
(VIR_DOMAIN_CRASHED_LAST): Drop dead defines.
(VIR_DOMAIN_PMSUSPENDED_LAST): Drop dead define.
(virDomainPMSuspendedReason): Add missing enum function.
(virDomainRunningReason, virDomainPausedReason): Add missing enum
value.
* src/conf/domain_conf.h (virDomainPMSuspendedReason): Declare
missing functions.
* src/libvirt_private.syms (domain_conf.h): Export them.
This patch adds data gathering to the NUMA gathering files and adds
support for outputting the data. The test driver and xend driver need to
be adapted to fill sensible data to the structure in a future patch.
This will allow storing additional topology data in the NUMA topology
definition.
This patch changes the storage type and fixes fallout of the change
across the drivers using it.
This patch also changes semantics of adding new NUMA cell information.
Until now the data were re-allocated and copied to the topology
definition. This patch changes the addition function to steal the
pointer to a pre-allocated structure to simplify the code.
The way in that memory balloon suppression was handled for S390
is flawed for a number or reasons.
1. Just preventing the default balloon to be created in the case
of VIR_ARCH_S390[X] is not sufficient. An explicit memballoon
element in the guest definition will still be honored, resulting
both in a -balloon option and the allocation of a PCI bus address,
neither being supported.
2. Prohibiting balloon for S390 altogether at a domain_conf level
is no good solution either as there's work in progress on the QEMU
side to implement a virtio-balloon device, although in
conjunction with a new machine type. Suppressing the balloon
should therefore be done at the QEMU driver level depending
on the present capabilities.
Therefore we remove the conditional suppression of the default
balloon in domain_conf.c.
Further, we are claiming the memballoon device for virtio-s390
during device address assignment to prevent it from being considered
as a PCI device.
Finally, we suppress the generation of the balloon command line option
if this is a virtio-s390 machine.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Although the nwfilter driver skips startup when running in a
session libvirtd, it did not skip reload or shutdown. This
caused errors to be reported when sending SIGHUP to libvirtd,
and caused an abort() in libdbus on shutdown due to trying
to remove a dbus filter that was never added
Adds a "ram" attribute globally to the video.model element, that changes
the resulting qemu command line only if video.type == "qxl".
<video>
<model type='qxl' ram='65536' vram='65536' heads='1'/>
</video>
That attribute gets a default value of 64*1024. The schema is unchanged
for other video element types.
The resulting qemu command line change is the addition of
-global qxl-vga.ram_size=<ram>*1024
or
-global qxl.ram_size=<ram>*1024
For the main and secondary qxl devices respectively.
The default for the qxl ram bar is 64*1024 kilobytes (the same as the
default qxl vram bar size).
The count of vCPUs for a domain is extracted as a usingned long variable
but is stored in a unsigned short. If the actual number was too large,
a faulty number was stored.
Commit id a994ef2d1 changed the mechanism to store/update the default
security label from using disk->seclabels[0] to allocating one on the
fly. That change allocated the label, but never saved it. This patch
will save the label. The new virDomainDiskDefAddSecurityLabelDef() is
a copy of the virDomainDefAddSecurityLabelDef().
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=895294
The symptom was that attempts to modify a network device using
virDomainUpdateDeviceFlags() would fail if the original device had a
<boot> element (e.g. "<boot order='1'/>"), even if the updated device
had the same <boot> element. Instead, the following error would be logged:
cannot modify network device boot index setting
It's true that it's not possible to change boot order (internally
known as bootIndex) of a live device; qemuDomainChangeNet checks for
that, but the problem was that the information it was checking was
incorrect.
Explanation:
When a complete domain is parsed, a global (to the domain) "bootMap"
is passed down to the parse for each device; the bootMap is used to
make sure that devices don't have conflicting settings for their boot
orders.
When a single device is parsed by itself (as in the case of
virDomainUpdateDeviceFlags), there is no global bootMap that would be
appropriate to send, so NULL is sent instead. However, although the
lowest level function that parses just the boot order *does* simply
skip the sanity check in that case, the next higher level
"virDomainDeviceInfoParseXML" function refuses to call down to the
lower "virDomainDeviceBootParseXML" if bootMap is NULL. So, the boot
order is never set in the "new" device object, and when it is compared
to the original (which does have a boot order), they don't match.
The fix is to patch virDomainDeviceInfoParseXML to not care about
bootMap, and just always call virDomainDeviceInfoBootParseXML whenever
there is a <boot> element. When we are only parsing a single device,
we don't care whether or not any specified boot order is consistent
with the rest of the domain; we will always do this check later (in
the current case, we do it by verifying that the net bootIndex exactly
matches the old bootIndex).
that broke the build like:
CC libvirt_conf_la-domain_conf.lo
conf/domain_conf.c: In function 'virDomainVcpuPinAdd':
conf/domain_conf.c:11920:29: error: 'vpcupin' undeclared (first use in this function)
conf/domain_conf.c:11920:29: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [libvirt_conf_la-domain_conf.lo] Error 1
The virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes
all require a mutex, so can be switched to use virObjectLockable
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently all classes must directly inherit from virObject.
This allows for arbitrarily deep hierarchy. There's not much
to this aside from chaining up the 'dispose' handlers from
each class & providing APIs to check types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an optional 'type' attribute to <target> element of serial port
device. There are two choices for its value, 'isa-serial' and
'usb-serial'. For backward compatibility, when attribute 'type' is
missing the 'isa-serial' will be chosen as before.
Libvirt XML sample
<serial type='pty'>
<target type='usb-serial' port='0'/>
<address type='usb' bus='0' port='1'/>
</serial>
qemu commandline:
qemu ${other_vm_args} \
-chardev pty,id=charserial0 \
-device usb-serial,chardev=charserial0,id=serial0,bus=usb.0,port=1
gcc 4.1.2 on RHEL 5 warned:
conf/network_conf.c:3136: warning: 'foundIdx' may be used uninitialized in this function
The warning is spurious, but initializing the variable doesn't hurt.
* src/conf/network_conf.c (virNetworkDefUpdateDNSHost): Silence
unused variable warning.
The SCLP console is the native console type for s390 and is preferred
over the virtio console as it doesn't require special drivers and
is more efficient. Recent versions of QEMU come with SCLP support
which is hereby enabled.
The new target types 'sclp' and 'sclplm' can be used to specify a
SCLP console. Adding documentation, domain schema and XML processing
support.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Like "rawio", "sgio" is only allowed for block disk of device
type "lun".
It doesn't default disk->sgio to "filtered" when parsing, as
it won't be able to distinguish explicitly requested "filtered"
and a default "filtered" in driver then. We have to error out for
explicit request when the kernel doesn't support the new sysfs
knob "unpriv_sgio", however, for defaulted "filtered", we can
just ignore it if the kernel doesn't support "unpriv_sgio".
This also changes the function signature to take a
virDomainChrSourceDefPtr instead of just a path, since it needs to
differentiate behavior based on source->type.
The functionality provided in virchrdev.c (previously virconsole.c) is
applicable to other types of character devices besides consoles, such
as channels. This patch is just code motion, renaming things such as
"console" or "pty", instead using more general terms such as
"character device" or "device path".
gcc -O2 complained:
../../src/conf/network_conf.c: In function 'virNetworkDefUpdateDNSSrv':
../../src/conf/network_conf.c:3232: error: 'foundIdx' may be used uninitialized in this function [-Wuninitialized]
It turned out to be a spurious warning (we didn't use foundIdx
unless foundCt was non-zero). But in investigating that, I noticed
a worse problem: we were using 'if (foundCt > 1)', but since foundCt
was bool, it could never be > 1.
* src/conf/network_conf.c (virNetworkDefUpdateDNSHost): Use
correct type.
(virNetworkDefUpdateDNSSrv): Likewise, and silence compiler
warning.
To bring in line with new naming practice, rename the=
src/util/cgroup.{h,c} files to vircgroup.{h,c}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Cirrus VGA model is not supported on ppc64 currently.
It needs to set std VGA model as the default model.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
When parsing the arch from domain XML, the result was only
saved to a local variable, not the virDomainDefPtr
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We can use VIR_REALLOC_N with NULL pointer, which behaves the same way
as VIR_ALLOC_N in that case, so no need for a condition that's
checking if some data are allocated already.
---
I tried to find other parts of the code similar to this, so I can do a
full cleanup for the whole repository, so I used this (excuse the long
line, but that's how I was writing it):
git grep -nHC 5 -e VIR_REALLOC_N -e VIR_ALLOC_N | while read line; do if [[ "$line" == "--" ]]; then if [[ ${#tmpbuf} -gt 10 && "$REALLOC_N" == "true" && "$ALLOC_N" == "true" ]]; then echo $line; while [[ ${#tmpbuf[*]} -gt 0 ]]; do echo "${tmpbuf[0]}"; tmpbuf=( "${tmpbuf[@]:1:${#tmpbuf[*]}}" ); done; fi; unset tmpbuf REALLOC_N ALLOC_N; else if [[ "$ALLOC_N" != "true" && "${line/VIR_ALLOC_N//}" != "${line}" ]]; then ALLOC_N="true"; fi; if [[ "$REALLOC_N" != "true" && "${line/VIR_REALLOC_N//}" != "${line}" ]]; then REALLOC_N="true"; fi; tmpbuf[${#tmpbuf[*]}]="$line"; fi; done | less
And reviewed the output just to find out this was the only occurrence of
the inconsistency.
On few places there are too many levels of indentation when some of
them can be fixed with negating the option they are in or omitting
useless condition altogether.
Convert the host capabilities and domain config structs to
use the virArch datatype. Update the parsers and all drivers
to take account of datatype change
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The <hostdev> device type has long had a redundant "mode"
attribute, which has always been "subsys". This finally
introduces a new mode "capabilities", which will be used
by the LXC driver for device assignment. Since container
based virtualization uses a single kernel, the idea of
assigning physical PCI devices doesn't make sense. It is
still reasonable to assign USB devices, but for assigning
arbitrary nodes in /dev, the new 'capabilities' mode is
to be used.
The first capability support is 'storage', which is for
assignment of block devices. Functionally this is really
pretty similar to the <disk> support. The only difference
is the device node name is identical in both host and
container namespaces.
<hostdev mode='capabilities' type='storage'>
<source>
<block>/dev/sdf1</block>
</source>
</hostdev>
The second capability support is 'misc', which is for
assignment of character devices. There is no existing
parallel to this. Again the device node is the same
inside & outside the container.
<hostdev mode='capabilities' type='misc'>
<source>
<char>/dev/input/event3</char>
</source>
</hostdev>
The reason for keeping the char & storage devices
separate in the domain XML, is to mirror the split
in the node device XML. NB the node device XML does
not yet report character devices, but that's another
new patch to come
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch simplifies the code that parses the fallback and vendor_id
attributes from the domain xml cpu definition.
Changes done:
- free temp variables in the cleanup section instead of local use
- remove checking for presence of the attribute to directly getting the
value (saving call to virXPathBoolean)
- replace loop used to check for ',' in the vendor_id string with strchr
This patch fixes a problem that vendor_id attribute can not be defined
when fallback attribute is not defined.
If I define domain xml like below:
<domain>
<cpu>
<model vendor_id='aaaabbbbcccc'>core2duo</model>
</cpu>
</domain>
In dumpxml, vendor_id is not reflected:
<domain>
<cpu mode='custom' match='exact'>
<model fallback='allow'>core2duo</model>
</cpu>
</domain>
The expected output is:
<domain>
<cpu mode='custom' match='exact'>
<model fallback='allow' vendor_id='aaaabbbbcccc'>core2duo</model>
</cpu>
</domain>
If the fallback attribute and vendor_id attribute is defined at the same
time, it's reflected as expected.
Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com>
If there are multiple video devices
primary = 'yes' marks this video device as the primary one.
The rest are secondary video devices. No more than one could be
mark as primary. If none of them has primary attribute, the first
one will be the primary by default like what it was.
The reason of this changing is that for qemu, only one primary video
device is permitted which can be of any type. For secondary video
devices, only qxl is allowd. Primary attribute removes the restriction
that the first have to be the primary one.
We always put the primary video device into the first position of
video device structure array after parsing.
Move the code for matching hostdev instances out of virDomainHostdevFind
and into virDomainHostdevMatch method, which in turn calls out to other
helper methods depending on the type of hostdev.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rename virDomainHostdevPartsParse to virDomainHostdevDefParseSubsys
to reflect the fact that it only deals with hostdevs uing the
traditional mode=subsystem, and not mode=capabilities
Rename virDomainHostSourceFormat to virDomainHostdevDefFormatSubsys
for the same reason.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Interfaces keeps a class_id, which is an ID from which bridge
part of QoS settings is derived. We need to store class_id
in domain status file, so we can later pass it to
virNetDevBandwidthUnplug.
Currently, we are only keeping a inactive XML configuration
in status dir. This is no longer enough as we need to keep
this class_id attribute so we don't overwrite old entries
when the daemon restarts. However, since there has already
been release which has just <network/> as root element,
and we want to keep things compatible, detect that loaded
status file is older one, and don't scream about it.
Network should be notified if we plug in or unplug an
interface, so it can perform some action, e.g. set/unset
network part of QoS. However, we are doing this in very
early stage, so iface->ifname isn't filled in yet. So
whenever we want to report an error, we must use a different
identifier, e.g. the MAC address.
This is however supported only on domain interfaces with
type='network'. Moreover, target network needs to have at least
inbound QoS set. This is required by hierarchical traffic shaping.
From now on, the required attribute for <inbound/> is either 'average'
(old) or 'floor' (new). This new attribute can be used just for
interfaces type of network (<interface type='network'/>) currently.
The DHCPv6 support includes IPV6 dhcp-range and dhcp-host for one
IPv6 subnetwork on one interface. This support will only work
if dnsmasq version >= 2.64; otherwise an error occurs if
dhcp-range or dhcp-host is specified for an IPv6 address.
Essentially, this change provides the same DHCP support for IPv6
that has been available for IPv4.
With dnsmasq >= 2.64, support for the RA service is also now provided
by dnsmasq (radvd is no longer used/started). (Although at least one
version of dnsmasq prior to 2.64 "supported" IPv6 Router
Advertisement, there were bugs (fixed in 2.64) that rendered it
unusable.)
Documentation and the network schema has been updated
to reflect the new support.
virNetworkDefUpdateForward requires separate functions to parse and
clear a virNetworkForwardDef by itself, but they were previously just
inlined in the virNetworkDef parse and free functions. This patch
makes them into separate functions.
The attributes of a <network> element's <forward> element were
previously stored directly in the virNetworkDef object, but
virNetworkUpdateForward() needs to operate on a <forward> in
isolation, so this patchs pulls out all those attributes into a
separate virNetworkForwardDef struct (and shortens their names
appropriately). This new object is contained in the virNetworkDef, not
pointed to by it, so there is no extra memory management.
This patch makes no functional changes, it only changes, e.g.,
"nForwardIfs" to "forward.nifs".
The other clear functions in network_conf.c that clear out arrays of
sub-objects do so by using the n[itemname]s value as a counter going
down to 0. Make this one consistent. There's no functional value, just
makes the style more consistent with the rest of the file.
This makes some function names and arg lists for consistent with other
parse functions in network_conf.c. While modifying
virNetworkIPParseXML(), also change its "error" label to "cleanup",
since the code at that label is executed on success as well as
failure.
These three functions are very similar - none allow a MODIFY
operation; you can only add or delete.
The biggest difference between them (other than the data itself) is in
the criteria for determining a match, and whether or not multiple
matches are possible:
1) for HOST records, it's considered a match if the IP address or any
of the hostnames of an existing record matches.
2) for SRV records, it's a match if all of
domain+service+protocol+target *which have been specified* are
matched.
3) for TXT records, there is only a single field to match - name
(value can be the same for multiple records, and isn't considered a
search term), so by definition there can be no ambiguous matches.
In all three cases, if any matches are found, ADD will fail; if
multiple matches are found, it means the search term was ambiguous,
and a DELETE will fail.
The upper level code in bridge_driver.c is already implemented for
these functions - appropriate conf files will be re-written, and
dnsmasq will be SIGHUPed or restarted as appropriate.
Since there is only a single virNetworkDNSDef for any virNetworkDef,
and it's trivial to determine whether or not it contains any real
data, it's much simpler (and fits more uniformly with the parse
function calling sequence of the parsers for many other objects that
are subordinates of virNetworkDef) if virNetworkDef *contains* an
virNetworkDNSDef rather than pointing to one.
Since it is now just a part of another object rather than its own
object, it no longer makes sense to have a *Free() function, so that
is changed to a *Clear() function.
More importantly though, ParseXML and Clear functions are needed for
the individual items contained in a virNetworkDNSDef (srv, txt, and
host records), but none of them have a *Clear(), and only two of the
three had *ParseXML() functions (both of which used a non-uniform
arglist). Those problems are cleared up by this patch - it splits the
higher-level Clear function into separate functions for each of the
three, creates a parse for txt records, and cleans up the srv and host
parsers, so we now have all the utility functions necessary to
implement virNetworkDefUpdateDNS(Host|Srv|Txt).
This shortens the name of the structs for srv and txt, and their
instances in virNetworkDNSDef, to be more compact and uniform with the
naming of the dns host array. It also changes the type of ntxts, etc
from unsigned int to size_t, so that they can be used directly as args
to VIR_*_ELEMENT.
The already-written backend functions for virNetworkUpdate that add
and delete items into lists within the a network were already debugged
to work properly, but future such functions will use
VIR_(INSERT|DELETE)_ELEMENT instead, so these are changed for
uniformity.
QEMU supports setting vendor and product strings for disk since
1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch
exposes it with new XML elements <vendor> and <product> of disk
device.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=767057
It was possible to define a network with <forward mode='bridge'> that
had both a bridge device and a forward device defined. These two are
mutually exclusive by definition (if you are using a bridge device,
then this is a host bridge, and if you have a forward dev defined,
this is using macvtap). It was also possible to put <ip>, <dns>, and
<domain> elements in this definition, although those aren't supported
by the current driver (although it's conceivable that some other
driver might support that).
The items that are invalid by definition, are now checked in the XML
parser (since they will definitely *always* be wrong), and the others
are checked in networkValidate() in the network driver (since, as
mentioned, it's possible that some other network driver, or even this
one, could some day support setting those).
This patch adds the capability for virtual guests to do IPv6
communication via a virtual network interface with no IPv6 (gateway)
addresses specified. This capability has always been enabled by
default for IPv4, but disabled for IPv6 for security concerns, and
because it requires the ip6tables command to be operational (which
isn't the case on a system with the ipv6 module completely disabled).
This patch adds a new attribute "ipv6" at the toplevel of a <network>
object. If ipv6='yes', the extra ip6tables rules required to permite
inter-guest communications are added when the network is started. If
it is 'no', or not present, those rules will not be added; thus the
default behavior doesn't change, so there should be no compatibility
issues with any existing installations.
Note that virtual guests cannot communication with the virtualization
host via this interface, because the following kernel tunable has
been set:
net.ipv6.conf.<bridge_interface_name>.disable_ipv6 = 1
This assures that the bridge interface will not have an IPv6
link-local (fe80::) address.
To control this behavior so that it is not enabled by default, the parameter
ipv6='yes' on the <network> statement has been added.
Documentation related to this patch has been updated.
The network schema has also been updated.
Since we can't (currently) rely on the ability to provide blanket
support for all possible network changes by calling the toplevel
netdev hostside disconnect/connect functions (due to qemu only
supporting a lockstep between initialization of host side and guest
side of devices), in order to support live change of an interface's
nwfilter we need to make a special purpose function to only call the
nwfilter teardown and setup functions if the filter for an interface
(or its parameters) changes. The pattern is nearly identical to that
used to change the bridge that an interface is connected to.
This patch was inspired by a request from Guido Winkelmann
<guido@sagersystems.de>, who tested an earlier version.
To detect if an interface's nwfilter has changed, we need to also
compare the filterparams, which is a hashtable of virNWFilterVarValue.
virHashEqual can do this nicely, but requires a pointer to a function
that will compare two of the items being stored in the hashes.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=881480
These three functions:
virDomainNetGetActualBridgeName
virDomainNetGetActualDirectDev
virDomainNetGetActualDirectMode
return attributes that are in a union whose contents are interpreted
differently depending on the actual->type and so they should only
return non-0 when actual->type is 'bridge' (in the first case) or
'direct' (in the other two cases, but I had neglected to do that, so
...DirectDev() was returning bridge.brname (which happens to share the
same spot in the union with direct.linkdev) if actual->type was
'bridge', and ...BridgeName was returning direct.linkdev when
actual->type was 'direct'.
How does this involve Bug 881480 (which was about the inability to
switch between two networks that both have "<forward mode='bridge'/>
<bridge name='xxx'/>"? Whenever the return value of
virDomainNetGetActualDirectDev() for the new and old network
definitions doesn't match, qemuDomainChangeNet() requires a "complete
reconnect" of the device, which qemu currently doesn't
support. ...DirectDev() *should* have been returning NULL for old and
new, but was instead returning the old and new bridge names, which
differ.
(The other two functions weren't causing any behavioral problems in
virDomainChangeNet(), but their problem and fix was identical, so I
included them in this same patch).
Fix the null pointer access when UUID is not specified.
Introduce a bool 'uuidUsable' to virStoragePoolAuthCephx that indicates
if uuid was specified or not and use it instead of the pointless
comparison of the static UUID array to NULL.
Add an error message if both uuid and usage are specified.
Fixes:
Error: FORWARD_NULL (CWE-476):
libvirt-0.10.2/src/conf/storage_conf.c:461: var_deref_model: Passing
null pointer "uuid" to function "virUUIDParse(char const *, unsigned
char *)", which dereferences it. (The dereference is assumed on the
basis of the 'nonnull' parameter attribute.)
Error: NO_EFFECT (CWE-398):
libvirt-0.10.2/src/conf/storage_conf.c:979: array_null: Comparing an
array to null is not useful: "src->auth.cephx.secret.uuid != NULL".
Found by coverity:
Error: REVERSE_INULL (CWE-476):
libvirt-0.10.2/src/conf/netdev_bandwidth_conf.c:99: deref_ptr:
Directly dereferencing pointer "node".
libvirt-0.10.2/src/conf/netdev_bandwidth_conf.c:107:
check_after_deref: Null-checking "node" suggests that it may be
null, but it has already been dereferenced on all paths leading to
the check.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=879473
The name attribute is required for portgroup elements (yes, the RNG
specifies that), and there is code in libvirt that assumes it is
non-null. Unfortunately, the portgroup parsing function wasn't
checking for lack of portgroup. One adverse result of this was that
attempts to update a network by adding a portgroup with no name would
cause libvirtd to segfault. For example:
virsh net-update default add portgroup "<portgroup default='yes'/>"
This patch causes virNetworkPortGroupParseXML to fail if no name is
specified, thus avoiding any later problems.
In a few places, the return value could get passed to VIR_ALLOC_N without
being checked, resulting in a request to allocate a lot of memory if the
return value was negative.
This patch introduces the RNG schema and updates necessary data strucutures
to allow various hypervisors to make use of Gluster protocol as one of the
supported network disk backend. Next patch will add support to make use of
this feature in Qemu since it now supports Gluster protocol as one of the
network based storage backend.
Two new optional attributes for <host> element are introduced - 'transport'
and 'socket'. Valid transport values are tcp, unix or rdma. If none specified,
tcp is assumed. If transport is unix, socket specifies path to unix socket.
This patch allows users to specify disks on gluster backends like this:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='gluster' name='Volume1/image'>
<host name='example.org' port='6000' transport='tcp'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='gluster' name='Volume2/image'>
<host transport='unix' socket='/path/to/sock'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
This will simplify the refactoring of the ESX storage driver to support
a VMFS and an iSCSI backend.
One of the tasks the storage driver needs to do is to decide which backend
driver needs to be invoked for a given request. This approach extends
virStoragePool and virStorageVol to store extra parameters:
1. privateData: stores pointer to respective backend storage driver.
2. privateDataFreeFunc: stores cleanup function pointer.
virGetStoragePool and virGetStorageVol are modfied to accept these extra
parameters as user params. virStoragePoolDispose and virStorageVolDispose
checks for cleanup operation if available.
The private data pointer allows the ESX storage driver to store a pointer
to the used backend with each storage pool and volume. This avoids the need
to detect the correct backend in each storage driver function call.
The error "... but the cause is unknown" appeared for XMLs similar to
this:
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source file='/dev/zero'/>
<target dev='sr0'/>
</disk>
Notice unsupported disk type (for the driver), but also no address
specified. The first part is not a problem and we should not abort
immediately because of that, but the combination with the address
unknown was causing an unspecified error.
While fixing this, I added an error to one place where this return
value was not managed properly.
Currently the LXC driver logs audit messages when a container
is started or stopped. These audit messages, however, contain
the PID of the libvirt_lxc supervisor process. To enable
sysadmins to correlate with audit messages generated by
processes /inside/ the container, we need to include the
container init process PID.
We can't do this in the main 'start' audit message, since
the init PID is not available at that point. Instead we output
a completely new audit record, that lists both PIDs.
type=VIRT_CONTROL msg=audit(1353433750.071:363): pid=20180 uid=0 auid=501 ses=3 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 msg='virt=lxc op=init vm="busy" uuid=dda7b947-0846-1759-2873-0f375df7d7eb vm-pid=20371 init-pid=20372 exe="/home/berrange/src/virt/libvirt/daemon/.libs/lt-libvirtd" hostname=? addr=? terminal=pts/6 res=success'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit a4c19459aa only added the
QEMU capability flag, command line option and added the boot element
for redirdev's in the XML schema.
This patch adds support for parsing and writing the XML with redirdevs
with the boot flag. It also ignores unknown XML elements in redirdev
instead of failing with:
"error: An error occurred, but the cause is unknown"
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=805414
Upcoming patches for revert-and-clone branching of snapshots need
to be able to copy a domain definition; make this step reusable.
* src/conf/domain_conf.h (virDomainDefCopy): New prototype.
* src/conf/domain_conf.c (virDomainObjCopyPersistentDef): Split...
(virDomainDefCopy): ...into new function.
(virDomainObjSetDefTransient): Use it.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Use it.
Relatively straight-forward. And since qemu was already using
VIR_DOMAIN_SNAPSHOT_FILTERS_ALL, with 6 different APIs all calling
into this common code, I've instantly added all 5 flags to 6 APIs.
* src/conf/snapshot_conf.h (VIR_DOMAIN_SNAPSHOT_FILTERS_ALL):
Enable new filters.
* src/conf/snapshot_conf.c (virDomainSnapshotObjListGetNames):
Prep the new flags.
(virDomainSnapshotObjListCopyNames): Actually do the filtering.
As we enable more modes of snapshot creation, it becomes more important
to be able to quickly filter based on snapshot properties. This patch
introduces new filter flags; subsequent patches will introduce virsh
back-compat filtering, as well as actual libvirt filtering.
* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add
five new flags in two new groups.
* src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames)
(virDomainListAllSnapshots, virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames)
(virDomainSnapshotListAllChildren): Document them.
* src/conf/snapshot_conf.h (VIR_DOMAIN_SNAPSHOT_FILTERS_STATUS)
(VIR_DOMAIN_SNAPSHOT_FILTERS_LOCATION): Add new convenience filter
collection macros.
* tools/virsh-snapshot.c (cmdSnapshotList): Add 5 new flags.
* tools/virsh.pod (snapshot-list): Document them.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=873134
The reported problem is that an attempt to restore a saved domain that
was configured with <currentMemory> and <memory> set to some (same for
both) number that's not a multiple of 4096KiB results in an error like
this:
error: Failed to start domain libvirt_test_api
error: XML error: current memory '4001792k' exceeds maximum '4000768k'
(in this case, currentMemory was set to 4000000KiB).
The reason for this failure is:
1) a saved image contains the "live xml" of the domain at the time of
the save.
2) the live xml of a running domain gets its currentMemory
(a.k.a. cur_balloon) directly from the qemu monitor rather than from
the configuration of the domain.
3) the value reported by qemu is (sometimes) not exactly what was
originally given to qemu when the domain was started, but is rounded
up to [some indeterminate granularity] - in some versions of qemu that
granularity is apparently 1MiB, and in others it is 4MiB.
4) When the XML is parsed to setup the state of the restored domain,
the XML parser for <currentMemory> compares it to <memory> (which is
the maximum allowed memory size for the domain) and if <currentMemory>
is greater than the next 1024KiB boundary above <memory>, it spits out
an error and fails.
For example (from the BZ) if you start qemu on RHEL6 with both
<currentMemory> and <memory> of 4000000 (this number is in KiB),
libvirt's dominfo or dumpxml will report "4001792" back (rounded up to
next 4MiB) for 10-20 seconds after the start, then revert to reporting
"4000000". On Fedora 16 (which uses qemu-1.0), it will instead report
"4000768" (rounded up to next 1MiB). On Fedora 17 (qemu-1.2), it seems
to always report "4000000". ("4000000" is of course okay, and
"4000768" is also okay since that's the next 1024KiB boundary above
"4000000" and the parser was already allowing for that. But "4001792
is *not* okay and produces the error message.)
This patch solves the problem by changing the allowed "fudge factor"
when parsing from 1024KiB to 4096KiB to match the maximum up-rounding
that could be done in qemu.
(I had earlier thought to fix this by up-rounding <memory> in the
dumpxml that's put into the saved image, but that wouldn't have fixed
the case where the save image was produced by an "unfixed"
libvirtd.)
For disk snapshots, the user could request an external snapshot
but not supply a filename; later on, we would check this condition
and generate a suitable name if possible, or gracefully error out
when not possible (such as when the original file was a block
device). But unless we come up with a suitable way to generate
external memory file names, we have no later code point that was
checking for NULL, so we should forbid this up front.
* src/conf/snapshot_conf.c (virDomainSnapshotDefParseString):
Avoid NULL deref, since we don't generate names yet.
This patch adds a helper to determine if snapshots are external and uses
the helper to fix detection of those in snapshot deletion code.
Snapshots are external if they have an external memory image or if the
disk locations are external. As mixed snapshots are forbidden for now
we need to check just one disk to know.
For S390, the default console target type cannot be of type 'serial'.
It is necessary to at least interpret the 'arch' attribute
value of the os/type element to produce the correct default type.
Therefore we need to extend the signature of defaultConsoleTargetType
to account for architecture. As a consequence all the drivers
supporting this capability function must be updated.
Despite the amount of changed files, the only change in behavior is
that for S390 the default console target type will be 'virtio'.
N.B.: A more future-proof approach could be to to use hypervisor
specific capabilities to determine the best possible console type.
For instance one could add an opaque private data pointer to the
virCaps structure (in case of QEMU to hold capsCache) which could
then be passed to the defaultConsoleTargetType callback to determine
the console target type.
Seems to be however a bit overengineered for the use case...
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
There were not previous callers with require_match set to true.
I originally implemented this bool with the intent of supporting
ESX snapshot semantics, where the choice of internal vs. external
vs. non-checkpointable must be made at domain start, but as ESX
has not been wired up to use it yet, we might as well fix it to
work with our next qemu patch for now, and worry about any further
improvements (changing the bool to a flags argument) if the ESX
driver decides to use this function in the future.
* src/conf/snapshot_conf.c (virDomainSnapshotAlignDisks): Alter
logic when require_match is true to deal with new XML.
Each <domainsnapshot> can now contain an optional <memory>
element that describes how the VM state was handled, similar
to disk snapshots. The new element will always appear in
output; for back-compat, an input that lacks the element will
assume 'no' or 'internal' according to the domain state.
Along with this change, it is now possible to pass <disks> in
the XML for an offline snapshot; this also needs to be wired up
in a future patch, to make it possible to choose internal vs.
external on a per-disk basis for each disk in an offline domain.
At that point, using the --disk-only flag for an offline domain
will be able to work.
For some examples below, remember that qemu supports the
following snapshot actions:
qemu-img: offline external and internal disk
savevm: online internal VM and disk
migrate: online external VM
transaction: online external disk
=====
<domainsnapshot>
<memory snapshot='no'/>
...
</domainsnapshot>
implies that there is no VM state saved (mandatory for
offline and disk-only snapshots, not possible otherwise);
using qemu-img for offline domains and transaction for online.
=====
<domainsnapshot>
<memory snapshot='internal'/>
...
</domainsnapshot>
state is saved inside one of the disks (as in qemu's 'savevm'
system checkpoint implementation). If needed in the future,
we can also add an attribute pointing out _which_ disk saved
the internal state; maybe disk='vda'.
=====
<domainsnapshot>
<memory snapshot='external' file='/path/to/state'/>
...
</domainsnapshot>
This is not wired up yet, but future patches will allow this to
control a combination of 'virsh save /path/to/state' plus disk
snapshots from the same point in time.
=====
So for 1.0.1 (and later, as needed), I plan to implement this table
of combinations, with '*' designating new code and '+' designating
existing code reached through new combinations of xml and/or the
existing DISK_ONLY flag:
domain memory disk disk-only | result
-----------------------------------------
offline omit omit any | memory=no disk=int, via qemu-img
offline no omit any |+memory=no disk=int, via qemu-img
offline omit/no no any | invalid combination (nothing to snapshot)
offline omit/no int any |+memory=no disk=int, via qemu-img
offline omit/no ext any |*memory=no disk=ext, via qemu-img
offline int/ext any any | invalid combination (no memory to save)
online omit omit off | memory=int disk=int, via savevm
online omit omit on | memory=no disk=default, via transaction
online omit no/ext off | unsupported for now
online omit no on | invalid combination (nothing to snapshot)
online omit ext on | memory=no disk=ext, via transaction
online omit int off |+memory=int disk=int, via savevm
online omit int on | unsupported for now
online no omit any |+memory=no disk=default, via transaction
online no no any | invalid combination (nothing to snapshot)
online no int any | unsupported for now
online no ext any |+memory=no disk=ext, via transaction
online int/ext any on | invalid combination (disk-only vs. memory)
online int omit off |+memory=int disk=int, via savevm
online int no/ext off | unsupported for now
online int int off |+memory=int disk=int, via savevm
online ext omit off |*memory=ext disk=default, via migrate+trans
online ext no off |+memory=ext disk=no, via migrate
online ext int off | unsupported for now
online ext ext off |*memory=ext disk=ext, via migrate+transaction
* docs/schemas/domainsnapshot.rng (memory): New RNG element.
* docs/formatsnapshot.html.in: Document it.
* src/conf/snapshot_conf.h (virDomainSnapshotDef): New fields.
* src/conf/domain_conf.c (virDomainSnapshotDefFree)
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Manage new fields.
* tests/domainsnapshotxml2xmltest.c: New test.
* tests/domainsnapshotxml2xmlin/*.xml: Update existing tests.
* tests/domainsnapshotxml2xmlout/*.xml: Likewise.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the XML warning, we print a virsh command line that can be used to
edit that XML. This patch prints UUIDs if the entity name contains
special characters (like shell metacharacters, or "--" that would break
parsing of the XML comment). If the entity doesn't have a UUID, just
print the virsh command that can be used to edit it.
For now, disk migration via block copy job is not implemented in
libvirt. But when we do implement it, we have to deal with the
fact that qemu does not yet provide an easy way to re-start a qemu
process with mirroring still intact. Paolo has proposed an idea
for a persistent dirty bitmap that might make this possible, but
until that design is complete, it's hard to say what changes
libvirt would need. Even something like 'virDomainSave' becomes
hairy, if you realize the implications that 'virDomainRestore'
would be stuck with recreating the same mirror layout.
But if we step back and look at the bigger picture, we realize that
the initial client of live storage migration via disk mirroring is
oVirt, which always uses transient domains, and that if a transient
domain is destroyed while a mirror exists, oVirt can easily restart
the storage migration by creating a new domain that visits just the
source storage, with no loss in data.
We can make life a lot easier by being cowards for now, forbidding
certain operations on a domain. This patch guarantees that we
never get in a state where we would have to restart a domain with
a mirroring block copy, by preventing saves, snapshots, migration,
hot unplug of a disk in use, and conversion to a persistent domain
(thankfully, it is still relatively easy to 'virsh undefine' a
running domain to temporarily make it transient, run tests on
'virsh blockcopy', then 'virsh define' to restore the persistence).
Later, if the qemu design is enhanced, we can relax our code.
The change to qemudDomainDefine looks a bit odd for undoing an
assignment, rather than probing up front to avoid the assignment,
but this is because of how virDomainAssignDef combines both a
lookup and assignment into a single function call.
* src/conf/domain_conf.h (virDomainHasDiskMirror): New prototype.
* src/conf/domain_conf.c (virDomainHasDiskMirror): New function.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainBlockJobImpl, qemudDomainDefine): Prevent dangerous
actions while block copy is already in action.
* src/qemu/qemu_hotplug.c (qemuDomainDetachDiskDevice): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=862515
which describes inconsistencies in dealing with duplicate mac
addresses on network devices in a domain.
(at any rate, it resolves *almost* everything, and prints out an
informative error message for the one problem that isn't solved, but
has a workaround.)
A synopsis of the problems:
1) you can't do a persistent attach-interface of a device with a mac
address that matches an existing device.
2) you *can* do a live attach-interface of such a device.
3) you *can* directly edit a domain and put in two devices with
matching mac addresses.
4) When running virsh detach-device (live or config), only MAC address
is checked when matching the device to remove, so the first device
with the desired mac address will be removed. This isn't always the
one that's wanted.
5) when running virsh detach-interface (live or config), the only two
items that can be specified to match against are mac address and model
type (virtio, etc) - if multiple netdevs match both of those
attributes, it again just finds the first one added and assumes that
is the only match.
Since it is completely valid to have multiple network devices with the
same MAC address (although it can cause problems in many cases, there
*are* valid use cases), what is needed is:
1) remove the restriction that prohibits doing a persistent add of a
netdev with a duplicate mac address.
2) enhance the backend of virDomainDetachDeviceFlags to check for
something that *is* guaranteed unique (but still work with just mac
address, as long as it yields only a single results.
This patch does three things:
1) removes the check for duplicate mac address during a persistent
netdev attach.
2) unifies the searching for both live and config detach of netdevices
in the subordinate functions of qemuDomainModifyDeviceFlags() to use the
new function virDomainNetFindIdx (which matches mac address and PCI
address if available, checking for duplicates if only mac address was
specified). This function returns -2 if multiple matches are found,
allowing the callers to print out an appropriate message.
Steps 1 & 2 are enough to fully fix the problem when using virsh
attach-device and detach-device (which require an XML description of
the device rather than a bunch of commandline args)
3) modifies the virsh detach-interface command to check for multiple
matches of mac address and show an error message suggesting use of the
detach-device command in cases where there are multiple matching mac
addresses.
Later we should decide how we want to input a PCI address on the virsh
commandline, and enhance detach-interface to take a --address option,
eliminating the need to use detach-device
* src/conf/domain_conf.c
* src/conf/domain_conf.h
* src/libvirt_private.syms
* added new virDomainNetFindIdx function
* removed now unused virDomainNetIndexByMac and
virDomainNetRemoveByMac
* src/qemu/qemu_driver.c
* remove check for duplicate max from qemuDomainAttachDeviceConfig
* use virDomainNetFindIdx/virDomainNetRemove instead
of virDomainNetRemoveByMac in qemuDomainDetachDeviceConfig
* use virDomainNetFindIdx instead of virDomainIndexByMac
in qemuDomainUpdateDeviceConfig
* src/qemu/qemu_hotplug.c
* use virDomainNetFindIdx instead of a homespun loop in
qemuDomainDetachNetDevice.
* tools/virsh-domain.c: modified detach-interface command as described
above
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=868483
virNetworkUpdate, virNetworkDefine, and virNetworkCreate all three
allow network definitions to contain multiple <portgroup> elements
with default='yes'. Only a single default portgroup should be allowed
for each network.
This patch updates networkValidate() (called by both
virNetworkCreate() and virNetworkDefine()) and
virNetworkDefUpdatePortGroup (called by virNetworkUpdate() to not
allow multiple default portgroups.
https://bugzilla.redhat.com/show_bug.cgi?id=866364
pointed out a crash due to virNetworkObjAssignDef free'ing
network->newDef without NULLing it afterward. A fix for this is in
upstream commit b7e9202401. While the
NULLing of newDef was a legitimate fix, newDef should have already
been empty (NULL) anyway (as indicated in the comment that was deleted
by that commit).
The reason that newDef had a non-NULL value (i.e. the root cause) was
that networkStartNetwork() had failed after populating
network->newDef, but then neglected to free/NULL newDef in the
cleanup.
(A bit of background here: network->newDef should contain the
persistent config of a network when a network is active (and of course
only when it is persisten), and NULL at all other times. There is also
a network->def which should contain the persistent definition of the
network when it is inactive, and the current live state at all other
times. The idea is that you can make changes to network->newDef which
will take effect the next time the network is restarted, but won't
mess with the current state of the network (virDomainObj has a similar
pair of virDomainDefs that behave in the same fashion). Personally I
think there should be a network->live and network->config, and the
location of the persistent config should *always* be in
network->config, but that's for a later cleanup).
Since I love things to be symmetric, I created a new function called
virNetworkObjUnsetDefTransient(), which reverses the effects of
virNetworkObjSetDefTransient(). I don't really like the name of the
new function, but then I also didn't really like the name of the old
one either (it's just named that way to match a similar function in
the domain conf code).
We used to walk the backing file chain at least twice per disk,
once to set up cgroup device whitelisting, and once to set up
security labeling. Rather than walk the chain every iteration,
which possibly includes calls to fork() in order to open root-squashed
NFS files, we can exploit the cache of the previous patch.
* src/conf/domain_conf.h (virDomainDiskDefForeachPath): Alter
signature.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Require caller
to supply backing chain via disk, if recursion is desired.
* src/security/security_dac.c
(virSecurityDACSetSecurityImageLabel): Adjust caller.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityImageLabel): Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupDiskCgroup)
(qemuTeardownDiskCgroup): Likewise.
(qemuSetupCgroup): Pre-populate chain.
Technically, we should not be re-probing any file that qemu might
be currently writing to. As such, we should cache the backing
file chain prior to starting qemu. This patch adds the cache,
but does not use it until the next patch.
Ultimately, we want to also store the chain in domain XML, so that
it is remembered across libvirtd restarts, and so that the only
kosher way to modify the backing chain of an offline domain will be
through libvirt API calls, but we aren't there yet. So for now, we
merely invalidate the cache any time we do a live operation that
alters the chain (block-pull, block-commit, external disk snapshot),
as well as tear down the cache when the domain is not running.
* src/conf/domain_conf.h (_virDomainDiskDef): New field.
* src/conf/domain_conf.c (virDomainDiskDefFree): Clean new field.
* src/qemu/qemu_domain.h (qemuDomainDetermineDiskChain): New
prototype.
* src/qemu/qemu_domain.c (qemuDomainDetermineDiskChain): New
function.
* src/qemu/qemu_driver.c (qemuDomainAttachDeviceDiskLive)
(qemuDomainChangeDiskMediaLive): Pre-populate chain.
(qemuDomainSnapshotCreateSingleDiskActive): Uncache chain before
snapshot.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Update
chain after block pull.
Requiring pre-allocation was an unusual idiom. It allowed iteration
over the backing chain to use fewer mallocs, but made one-shot
clients harder to read. Also, this makes it easier for a future
patch to move away from opening fds on every iteration over the chain.
* src/util/storage_file.h (virStorageFileGetMetadataFromFD): Alter
signature.
* src/util/storage_file.c (virStorageFileGetMetadataFromFD): Allocate
return value.
(virStorageFileGetMetadata): Update clients.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
This is the last use of raw strings for disk formats throughout
the src/conf directory.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Store enum
rather than string for disk type.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, virDomainSnapshotDefFormat):
Adjust users.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
Express the default disk type as an enum, for easier handling.
* src/conf/capabilities.h (_virCaps): Store enum rather than
string for disk type.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): Adjust
clients.
* src/qemu/qemu_driver.c (qemuCreateCapabilities): Likewise.
We have historically allowed 'aio' as a synonym for 'raw' for
back-compat to xen, but since a future patch will move to using
an enum value, we have to pick one to be our preferred output
name. This is a slight change in the output XML, but the sexpr
and xm outputs should still be identical, and the input XML can
still use either form.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Move aio
back-compat...
(virDomainDiskDefParseXML): ...to parse time.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenFormatSxprDisk): ...and
to output time.
* src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise.
* tests/sexpr2xmldata/sexpr2xml-*.xml: Update tests.
When an image has no backing file, using VIR_STORAGE_FILE_AUTO
for its type is a bit confusing. Additionally, a future patch
would like to reserve a default value for the case of no file
type specified in the XML, but different from the current use
of -1 to imply probing, since probing is not always safe.
Also, a couple of file types were missing compared to supported
code: libxl supports 'vhd', and qemu supports 'fat' for directories
passed through as a file system.
* src/util/storage_file.h (virStorageFileFormat): Add
VIR_STORAGE_FILE_NONE, VIR_STORAGE_FILE_FAT, VIR_STORAGE_FILE_VHD.
* src/util/storage_file.c (virStorageFileMatchesVersion): Match
documentation when version probing not supported.
(cowGetBackingStore, qcowXGetBackingStore, qcow1GetBackingStore)
(qcow2GetBackingStoreFormat, qedGetBackingStore)
(virStorageFileGetMetadataFromBuf)
(virStorageFileGetMetadataFromFD): Take NONE into account.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Likewise.
* src/conf/storage_conf.c (virStorageVolumeFormatFromString): New
function.
(poolTypeInfo): Use it.
which frees all allocated memory but doesn't set the passed pointer to
NULL. Therefore, we must do it ourselves. This is causing actual
libvirtd crash: Basically, when doing 'virsh net-edit' the newDef should
be dropped. And the memory is freed, indeed. However, the pointer is
not set to NULL but kept instead. And the next duo of calls 'virsh
net-start' and 'virsh net-destroy' starts the disaster. The latter one
does the same as 'virsh destroy'; it sees that newDef is nonNULL so it
replaces def with newDef (which has been freed already as said a few
lines above). Therefore any subsequent call accessing def will hit the ground.
Hypervisors are starting to support HyperV Enlightenment features that
improve behavior of guests running Microsoft Windows operating systems.
This patch adds support for the "relaxed" feature that improves timer
behavior and also establishes a framework to add these features in
future.
There was a crash possible when both <boot dev... and <boot
order... were specified due to virDomainDefParseBootXML() erroring out
before setting *tmp (which was free'd in cleanup). As a fix, I
created this cleanup that uses one pointer for all the temporary
stored XPath strings and values, plus this pointer is correctly
initialized to NULL.
This patch adds support for SUSPEND_DISK event; both lifecycle and
separated. The support is added for QEMU, machines are changed to
PMSUSPENDED, but as QEMU sends SHUTDOWN afterwards, the state changes
to shut-off. This and much more needs to be done in order for libvirt
to work with transient devices, wake-ups etc. This patch is not
aiming for that functionality.
