On a system with 160 CPUs the /proc/cpuinfo size grows beyond
the currently set limit of 10KB causing an internal error.
This patch increases the buffer size to 1MB.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Coverity flagged commit 0282ca45 as introducing a memory leak;
in all my refactoring to make capacity probing conditional on
whether the image is non-raw, I missed deleting the unconditional
probe.
* src/qemu/qemu_driver.c (qemuStorageLimitsRefresh): Drop
redundant assignment.
Signed-off-by: Eric Blake <eblake@redhat.com>
A recent lvm change has resulted in a change for the "default" type of
logical volume created when the "--virtualsize" or "--V" is supplied on
the command line (e.g. when the allocation and capacity values of a to
be created volume differ). It seems that at the very least the following
change adjusts the default type:
https://git.fedorahosted.org/cgit/lvm2.git/commit/?id=e0164f21
and the following may also have some impact.
https://git.fedorahosted.org/cgit/lvm2.git/commit/?id=87fc3b71
When using the virsh vol-create-as or vol-create xmlfile commands, the
result is that libvirt will now create a "thin logical volume" and a
"thin logical volume pool" rather than just a "thin snapshot logical
volume". For example the following sequence:
# lvcreate --name test -L 2M -V 5M lvm_test
Rounding up size to full physical extent 4.00 MiB
Rounding up size to full physical extent 8.00 MiB
Logical volume "test" created.
# lvs lvm_test
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lvol1 lvm_test twi-a-tz-- 4.00m 0.00 0.98
test lvm_test Vwi-a-tz-- 8.00m lvol1 0.00
compared to the former code which had the following:
LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert
test LVM_Test swi-a-s--- 4.00m [test_vorigin] 0.00
Since libvirt doesn't know how to parse the thin logical volume
and pool, it will fail to find the newly created volume and pool
even though it exists in the volume group.
It cannot find since the command used to find/parse returns a thin volume
'test' with no associated device, for example the output is:
lvol1##UgUwkp-fTFP-C0rc-ufue-xrYh-dkPr-FGPFPx#lvol1_tdata(0)#thin-pool#1#4194304#4194304#4194304#twi-a-tz--
test##NcaIoH-4YWJ-QKu3-sJc3-EOcS-goff-cThLIL##thin#0#8388608#4194304#8388608#Vwi-a-tz--
as compared to the former which had the following:
test#[test_vorigin]#Dt5Of3-4WE6-buvw-CWJ4-XOiz-ywOU-YULYw6#/dev/sda3(1300)#linear#1#4194304#4194304#4194304#swi-a-s---
While it's possible to generate code to handle the new thin lv and pool, this
patch will add a "--type snapshot" onto the lvcreate command libvirt uses
in order to "for now" be able to continue to utilize the thin snapshots
https://bugzilla.redhat.com/show_bug.cgi?id=1174569
There's nothing we need to do for shared iSCSI devices in
qemuAddSharedHostdev and qemuRemoveSharedHostdev. The iSCSI layer
takes care about that for us.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Wire up backing chain recursion. For the first time, it is now
possible to get libvirt to expose that qemu tracks read statistics
on backing files, as well as report maximum extent written on a
backing file during a block-commit operation.
For a running domain, where one of the two images has a backing
file, I see the traditional output:
$ virsh domstats --block testvm2
Domain: 'testvm2'
block.count=2
block.0.name=vda
block.0.path=/tmp/wrapper.qcow2
block.0.rd.reqs=1
block.0.rd.bytes=512
block.0.rd.times=28858
block.0.wr.reqs=0
block.0.wr.bytes=0
block.0.wr.times=0
block.0.fl.reqs=0
block.0.fl.times=0
block.0.allocation=0
block.0.capacity=1310720000
block.0.physical=200704
block.1.name=vdb
block.1.path=/dev/sda7
block.1.rd.reqs=0
block.1.rd.bytes=0
block.1.rd.times=0
block.1.wr.reqs=0
block.1.wr.bytes=0
block.1.wr.times=0
block.1.fl.reqs=0
block.1.fl.times=0
block.1.allocation=0
block.1.capacity=1310720000
vs. the new output:
$ virsh domstats --block --backing testvm2
Domain: 'testvm2'
block.count=3
block.0.name=vda
block.0.path=/tmp/wrapper.qcow2
block.0.rd.reqs=1
block.0.rd.bytes=512
block.0.rd.times=28858
block.0.wr.reqs=0
block.0.wr.bytes=0
block.0.wr.times=0
block.0.fl.reqs=0
block.0.fl.times=0
block.0.allocation=0
block.0.capacity=1310720000
block.0.physical=200704
block.1.name=vda
block.1.path=/dev/sda6
block.1.backingIndex=1
block.1.rd.reqs=0
block.1.rd.bytes=0
block.1.rd.times=0
block.1.wr.reqs=0
block.1.wr.bytes=0
block.1.wr.times=0
block.1.fl.reqs=0
block.1.fl.times=0
block.1.allocation=327680
block.1.capacity=786432000
block.2.name=vdb
block.2.path=/dev/sda7
block.2.rd.reqs=0
block.2.rd.bytes=0
block.2.rd.times=0
block.2.wr.reqs=0
block.2.wr.bytes=0
block.2.wr.times=0
block.2.fl.reqs=0
block.2.fl.times=0
block.2.allocation=0
block.2.capacity=1310720000
I may later do a patch that trims the output to avoid 0 stats,
particularly for backing files (which are more likely to have
0 stats, at least for write statistics when no block-commit
is performed). Also, I still plan to expose physical size
information (qemu doesn't expose it yet, so it requires a stat,
and for block devices, a further open/seek operation). But
this patch is good enough without worrying about that yet.
* src/qemu/qemu_driver.c (QEMU_DOMAIN_STATS_BACKING): New internal
enum bit.
(qemuConnectGetAllDomainStats): Recognize new user flag, and pass
details to...
(qemuDomainGetStatsBlock): ...here, where we can do longer recursion.
(qemuDomainGetStatsOneBlock): Output new field.
Signed-off-by: Eric Blake <eblake@redhat.com>
In order to report stats on backing chains, we need to separate
the output of stats for one block from how we traverse blocks.
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Split...
(qemuDomainGetStatsOneBlock): ...into new helper.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch introduces access to allocation information about
a backing chain of a live domain. While querying storage
volumes for read-only disks could provide some of the details,
we do NOT want to read() a file while qemu is writing it.
Also, there is one case where we have to rely on qemu: when
doing a block commit into a backing file, where that file is
stored in qcow2 format on a host block device, we want to know
the current highest write offset into that image, in order to
know if the disk must be resized larger. qemu-img does not
(currently) show this information, and none of the earlier
block APIs were extensible enough to expose it. But
virDomainListGetStats is perfect for the job!
We don't need a new group of statistics, as the existing block
group is sufficient. On the other hand, as existing libvirt
releases already report 1:1 mapping of block.count to <disk>
devices, changing the array size could confuse older clients;
and even with newer clients, the time and memory taken to
report additional statistics is not always necessary (backing
files are generally read-only except for block-commit, so while
read statistics may change, sizing statistics will not). So
the choice here is to add a new flag that only newer callers
will pass, when they are prepared for the additional information.
This patch introduces the new API, but it will take more
patches to get it implemented for qemu.
* include/libvirt/libvirt-domain.h
(VIR_CONNECT_GET_ALL_DOMAINS_STATS_BACKING): New flag.
* src/libvirt-domain.c (virConnectGetAllDomainStats): Document it,
and add a new field when it is in use.
* tools/virsh-domain-monitor.c (cmdDomstats): Use new flag.
* tools/virsh.pod (domstats): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
A coming patch will make it optionally possible to list backing
chain block stats; in this mode of operation, block.counts is no
longer the number of <disks> in the domain, but the number of
blocks in the array being reported. We still want block.count
listed first, but rather than iterate the tree twice (once to
count, and once to list stats), it's easier to just touch things
up after the fact.
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Compute count
after the fact.
Signed-off-by: Eric Blake <eblake@redhat.com>
The prior refactoring can now be put to use. With the same domain
as the earlier commit 7b49926 (one qcow2 disk and an empty
cdrom drive):
$ virsh domstats --block foo
Domain: 'foo'
block.count=2
block.0.name=hda
block.0.path=/var/lib/libvirt/images/foo.qcow2
block.0.allocation=1309614080
block.0.capacity=42949672960
block.0.physical=1309671424
block.1.name=hdc
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Use
qemuStorageLimitsRefresh to report offline statistics.
Signed-off-by: Eric Blake <eblake@redhat.com>
Create a helper function that can be reused for gathering block
info from virDomainListGetStats.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Split guts...
(qemuStorageLimitsRefresh): ...into new helper function.
Signed-off-by: Eric Blake <eblake@redhat.com>
The documentation for virDomainBlockInfo was confusing: it stated
that 'physical' was the size of the container, then gave an example
of it being the amount of storage used by a sparse file (that is,
for a sparse raw image on a regular file, the wording implied
capacity==physical, while allocation was smaller; but the example
instead claimed physical==allocation). Since we use 'physical' for
the last offset of a block device, we should do likewise for
regular files.
Furthermore, the example claimed that for a qcow2 regular file,
allocation==physical. At the time the code was first written,
this was true (qcow2 files were allocated sequentially, and were
never sparse, so the last sector written happened to also match
the disk space occupied); but modern qemu does much better and
can punch holes for a qcow2 with allocation < physical.
Basically, after this patch, the three fields are now reliably
mapped as:
'capacity' - how much storage the guest can see (equal to
physical for raw images, determined by image metadata otherwise)
'allocation' - how much storage the image occupies (similar to
what 'du' would report)
'physical' - the last offset of the image (similar to what 'ls'
would report)
'capacity' can be larger than 'physical' (such as for a qcow2
image that does not vary much from a backing file) or smaller
(such as for a qcow2 file with lots of internal snapshots).
Likewise, 'allocation' can be (slightly) larger than 'physical'
(such as counting the tail of cluster allocations required to
round a file size up to filesystem granularity) or smaller
(for a sparse file). A block-resize operation changes capacity
(which, for raw images, also changes physical); many non-raw
images automatically grow physical and allocation as necessary
when starting with an allocation smaller than capacity; and even
when capacity and physical stay unchanged, allocation can change
when converting sectors from holes to data or back.
Note that this does not change semantics for qcow2 images stored
on block devices; there, we still rely on qemu to report the
highest written extent for allocation. So using this API to
track when to extend a block device because a qcow2 image is
about to exceed a threshold will not see any changes.
Also, note that virStorageVolInfo is unfortunately limited to
just 'capacity' and 'allocation' (we can't expand it to add
'physical', although we can expand the XML to add it there);
historically, that struct's 'allocation' value has reported
file size for qcow2 files (what this patch terms 'physical'
for a domain block device), but disk usage for raw files (what
this patch terms 'allocation'). So follow-up patches will be
needed to make storage volumes report the same allocation
values and get at physical values, where those differ.
* include/libvirt/libvirt-domain.h (_virDomainBlockInfo): Tweak
documentation to match saner definition.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): For regular
files, physical size is capacity, not allocation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ultimately, we want to avoid read()ing a file while qemu is running.
We still have to open() block devices to determine their physical
size, but that is safer. This patch rearranges code to group
together all code that reads the image, to make it easier for later
patches to skip the metadata collection when possible.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Check for empty
disk up front. Place metadata reading next to use.
Signed-off-by: Eric Blake <eblake@redhat.com>
When requested in a later patch, the QMP command results are now
examined recursively. As qemu_driver will eventually have to
read items out of the hash table as stored by this patch, the
computation of backing alias string is done in a shared location.
* src/qemu/qemu_domain.h (qemuDomainStorageAlias): New prototype.
* src/qemu/qemu_domain.c (qemuDomainStorageAlias): Implement it.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetOneBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacityOne): Perform recursion.
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacity): Update callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch will allow recursion into backing chains when
collecting block stats. This patch should not change behavior,
but merely moves out the common code that will be reused once
recursion is enabled, and adds the parameter that will turn on
recursion.
* src/qemu/qemu_monitor.h (qemuMonitorGetAllBlockStatsInfo)
(qemuMonitorBlockStatsUpdateCapacity): Add recursion parameter,
although it is ignored for now.
* src/qemu/qemu_monitor.h (qemuMonitorGetAllBlockStatsInfo)
(qemuMonitorBlockStatsUpdateCapacity): Likewise.
* src/qemu/qemu_monitor_json.h
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacity): Likewise.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacity): Add parameter, and
split...
(qemuMonitorJSONGetOneBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacityOne): ...into helpers.
(qemuMonitorJSONGetBlockStatsInfo): Update caller.
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Update caller.
* src/qemu/qemu_migration.c (qemuMigrationCookieAddNBD): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, grabbing blockinfo always calls stat on the disk, then
opens the image to determine the capacity, using a throw-away
virStorageSourcePtr. This has a couple of drawbacks:
1. We are calling stat and opening a file on every invocation of
the API. However, there are cases where the stats should NOT be
changing between successive calls (if a domain is running, no
one should be changing the physical size of a block device or raw
image behind our backs; capacity of read-only files should not
be changing; and we are the gateway to the block-resize command
to know when the capacity of read-write files should be changing).
True, we still have to use stat in some cases (a sparse raw file
changes allocation if it is read-write and the amount of holes is
changing, and a read-write qcow2 image stored in a file changes
physical size if it was not fully pre-allocated). But for
read-only images, even this should be something we can remember
from the previous time, rather than repeating every call.
2. We want to enhance the power of virDomainListGetStats, by
sharing code. But we already have a virStorageSourcePtr for
each disk, and it would be easier to reuse the common structure
than to have to worry about the one-off virDomainBlockInfoPtr.
While this patch does not optimize reuse of information in point
1, it does get us closer to being able to do so; by updating a
structure that survives between consecutive calls.
* src/util/virstoragefile.h (_virStorageSource): Add physical, to
mirror virDomainBlockInfo; rearrange fields to match public struct.
(virStorageSourceCopy): Copy the new field.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Store into
storage source, then copy to block info.
Signed-off-by: Eric Blake <eblake@redhat.com>
In order for a future patch to virDomainListGetStats to reuse
some code for determining disk usage of offline domains, we
need to make it easier to pull out part of the guts of grabbing
blockinfo. The current implementation grabs a job fairly late
in the game, while getstats will already own a job; reordering
things so that the job is always grabbed up front in both
functions will make it easier to pull out the common code.
This patch results in grabbing a job in cases where one was not
previously needed, but as it is a query job, it should not be
noticeably slower.
This patch touches the same code as the fix for CVE-2014-6458
(commit b799259); in that patch, we avoided hotplug changing
a disk reference during the time of obtaining a monitor lock
by copying all data we needed and no longer referencing disk;
this patch goes the other way and ensures that by holding the
job, the disk cannot be changed so we no longer need to worry
about the disk being invalidated across the monitor lock.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Rearrange job
control to be outside of disk information.
Signed-off-by: Eric Blake <eblake@redhat.com>
When any of the functions modified in commit 214c687b took false branch,
the function itself used none of its parameters resulting in "unused
parameter" error. Rewriting these functions to the stubs we use
elsewhere should fix the problem.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit e3435caf added cleanup code to qemuDomainSetVcpusFlags() that was
not supposed to reset the error. Usual procedure was done, saving the
error to temporary variable, but it was never free'd, but rather leaked.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit af2a1f05 tried clearly separating each condition in
qemuRestoreCgroupState() for the sake of readability, however somehow
one condition body was missing. That means that the body of the next
condition got executed only if both of there were true, which is
impossible, thus resulting in a dead code and a logic error.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In commit d2632d60 we agreed taht we want the parsed uid to properly
overflow but only to -1, however the value was read into long and then
wrapped into uid_t. That meaned it failed on 32-bit systems.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Currently virStorageFileResize() function uses build conditionals to
choose either the posix_fallocate() or syscall(SYS_fallocate) with no
fallback in order to preallocate the space in the newly resized file.
Since the safezero code has a similar set of conditionals modify the
resize and safezero code in order to allow the resize logic to make use
of safezero to unify the look/feel of the code paths.
Add a new boolean (resize) to safezero() to make the optional decision
whether to try syscall(SYS_fallocate) if the posix_fallocate fails because
HAVE_POSIX_FALLOCATE is not defined (eg, return -1 and errno == 0).
Create a local safezero_sys_fallocate in order to handle the resize
code paths that support that. If not present, the set errno = ENOSYS
in order to allow the caller to handle the failure scenarios.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Currently build conditionals decide which of two safezero() functions
should be built - either the posix_fallocate() or mmap() with a fallback
to a slower safewrite() algorithm in order to preallocate space in a raw file.
This patch will refactor safezero to utilize static functions for either
posix_fallocate or mmap/safewrite. The build conditional still exist, but
are only for shorter sections of code.
The posix_fallocate path will make use of the ret/errno setting to contain
the logic for safezero to decide whether it needs to fallback to other
algorithms. A return of -1 with errno not changed will indicate the conditional
is not present; otherwise, a return of -1 with errno change indicates the
call was made and it failed (no functional difference to current algorithm).
The mmap/safewrite option changes only slightly to handle the ftruncate
failure for mmap. That is, previously if the ftruncate failed, there was
no fallback to the slow safewrite option.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Currently, when there is an API that's blocking with locked domain and
second API that's waiting in virDomainObjListFindByUUID() for the domain
lock (with the domain list locked) no other API can be executed on any
domain on the whole hypervisor because all would wait for the domain
list to be locked. This patch adds new optional approach to this in
which the domain is only ref'd (reference counter is incremented)
instead of being locked and is locked *after* the list itself is
unlocked. We might consider only ref'ing the domain in the future and
leaving locking on particular APIs, but that's no tonight's fairy tale.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Volume and pool formatting functions took different approaches to
unspecified uids/gids. When unknown, it is always parsed as -1, but one
of the functions formatted it as unsigned int (wrong) and one as
int (better). Due to that, our two of our XML files from tests cannot
be parsed on 32-bit machines.
RNG schema needs to be modified as well, but because both
storagepool.rng and storagevol.rng need same schema for permission
element, save some space by moving it to storagecommon.rng.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When hot-plugging a VCPU into the guest, kvm needs to allocate some data
from the DMA zone, which might be in a memory node that's not allowed in
cpuset.mems. Basically the same problem as there was with starting the
domain and due to which commit 7e72ac7878
exists. This patch just extends it to hotplugging as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1161540
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Instead of setting the value of cpuset.mems once when the domain starts
and then re-calculating the value every time we need to change the child
cgroup values, leave the cgroup alone and rather set the child data
every time there is new cgroup created. We don't leave any task in the
parent group anyway. This will ease both current and future code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In systemd >= 218, the udev_set_log_fn method has been marked
deprecated and turned into a no-op. Nothing in the udev client
library will print to stderr by default anymore, so we can
just stop installing a logging hook for new enough udev.
Since we switched to using GIT to apply patches in the RPM spec,
we automagically also turned on -Werror, since the .git directory
now exists. We don't want this on in Fedora, since changing
header files often lead to new warnings being issued. Explicitly
turn off -Werror for non-RHEL platforms, instead of relying on
the defaults
For SCSI and SATA devices controller and unit are used
to specify drive address. For IDE devices - bus specifies
IDE bus, becase usually there are 2 IDE buses on IDE
controller.
Parallels SDK allows to set drive position by calling
PrlVmDev_SetStackIndex. Since PCS VMs have only one
controller of each type, for SATA and SCSI devices it
simple means position on bus, for IDE devices -
2 * bus_number + position_on_bus.
This patch fixes mapping from libvirt's disk->info.addr.drive
to parallels's 'StackIndex'.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
It seems file format is usually specified event for
real block devices. So report that file format is
raw in virDomainGetXMLDesc and add checks for proper
file format to prlsdkAddDisk.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
NULL value of virDomainVideoAccelDefPtr means default
values for video acceleration, so don't report error in
this case.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1174154
When we use attach-device add a hostdev or chr device which have a
iscsi address or others (just like guest agent, subsys iscsi disk...),
we will find there is no basic controller for our new attached device.
Somtimes this will make guest cannot start after we add them (although
they can start at the second time).
Signed-off-by: Luyao Huang <lhuang@redhat.com>
When libvirt is managing a bridge's forwarding database (FDB)
(macTableManager='libvirt'), if we add FDB entries for a new guest
interface even before the qemu process is created, then in the case of
a migration any other guest attached to the "destination" bridge will
have its traffic immediately sent to the destination of the migration
even while the source domain is still running (and the destination, of
course, isn't). To make sure that traffic from other guests on the new
host continues flowing to the old guest until the new one is ready, we
have to wait until the new guest CPUs are started to add the FDB
entries.
Conversely, we need to remove the FDB entries from the bridge any time
the guest CPUs are stopped; among other things, this will assure
proper operation during a post-copy migration (which is just the
opposite of the problem described in the previous paragraph).
We can change vnc password by using virDomainUpdateDeviceFlags API with
live flag. But it can't be changed with config flag. Error is reported as
below.
error: Operation not supported: persistent update of device 'graphics' is not supported
This patch supports the graphics arguments changed with config flag.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
It's not supported to change some graphics arguments with '--live'.
Replace some error code VIR_ERR_INTERNAL_ERROR and VIR_ERR_INVALID_ARG
with VIR_ERR_OPERATION_UNSUPPORTED.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1174096
When both parameter have lockspaces present, virDomainLeaseIndex
always returns -1 even there is a lease the same with the one we
check. This is due to broken logic in 'if-else' statement.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1173507
It occurred to me that OpenStack uses the following XML when not using
regular huge pages:
<memoryBacking>
<hugepages>
<page size='4' unit='KiB'/>
</hugepages>
</memoryBacking>
However, since we are expecting to see huge pages only, we fail to
startup the domain with following error:
libvirtError: internal error: Unable to find any usable hugetlbfs
mount for 4 KiB
While regular system pages are not huge pages technically, our code is
prepared for that and if it helps OpenStack (or other management
applications) we should cope with that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1174053
Introduced by commit id '17bddc46f' - fix a libvirtd crash when
matching a network iscsi hostdev with a host iscsi hostdev.
When we use attach-device to coldplug a network iscsi hostdev,
libvirt will check if there is already a device in XML. But if
the 'b' is a host iscsi hostdev and 'a' is a network iscsi hostdev,
then libvirtd will crash in virDomainHostdevMatchSubsysSCSIiSCSI
because 'b' doesn't have a hostname.
Add a check in virDomainHostdevMatchSubsys, if the a's protocol
and b's protocol is not the same.
Following is the backtrace:
0 0x00007f850d6bc307 in virDomainHostdevMatchSubsysSCSIiSCSI at conf/domain_conf.c:10889
1 virDomainHostdevMatchSubsys at conf/domain_conf.c:10911
2 virDomainHostdevMatch at conf/domain_conf.c:10973
3 virDomainHostdevFind at conf/domain_conf.c:10998
4 0x00007f84f6a10560 in qemuDomainAttachDeviceConfig at qemu/qemu_driver.c:7223
5 qemuDomainAttachDeviceFlags at qemu/qemu_driver.c:7554
Signed-off-by: Luyao Huang <lhuang@redhat.com>
