Keep them along with other arch/machine type checks for
features instead of waiting until command line generation
time.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This reverts commit 038eb472a0.
On reflection adding defaults for arbitrary guest XML device config
settings to the qemu.conf is not a sustainable path. Removing the
support for rx/tx queue size so that it doesn't set a bad precedent.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The floppy command formatting is special-cased since it does not
directly translate to a single '-device' argument.
Move the code from qemuBuildDiskDriveCommandLine to a new helper
function so that all the related code is together.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Several PCI controllers have the same options, and thus
can be handled together.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Loadable drivers must never depend on each other. Over time some usage
mistakenly crept in for the storage and network drivers, but now this is
eliminated the syntax-check rules can enforce this separation once more.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use a switch statement instead of if-else-if statements. Move the
command line building of the iothread attribute into the common path
as the SCSI controller attributes are already validated.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Move the SATA controller check from command line building to
controller def validation. This includes copying the SATA
skip check found in qemuBuildSkipController.
Move the qemuCaps checks over to qemuDomainControllerDefValidatePCI.
This requires two test updates in order to set the correct capability
bit for an xml2xml test as well as setting up the similar capability
for the pseries memlocktest.
Excluding the qemuCaps checks, move the remainder of the checks
that validate whether the PCI definition is valid or not into
qemuDomainControllerDefValidatePCI.
Similar to the checking the modelName vs. NAME_NONE, let's make the
ModelNameTypeToString check more generic too within the checking done
in controller validation (with the same ignore certain models.
NB: We need to keep the ModelNameTypeToString fetch in command line
validation since we use it, but at least we can assume it returns
something valid now.
Move the various modelName == NAME_NONE from the command line
generation into domain controller validation. Also rather than
have multiple cases with the same check, let's make the code
more generic, but also note that it was the modelName option
that caused the failure. We also have to be sure not to check
the PCI models that we don't care about.
For the remaining checks in command line building, we can use
the field name in the error message to be more specific about
what causes the failure.
We format the 'chassis' and 'port' properties on the QEMU command
line later on, so we should make sure they've been set.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Move PCI validation checks out of qemu_command into the proper
qemu_domain validation helper.
Since there's a lot to move, we'll start slow by replicating the
pcie-root and pci-root avoidance from qemuBuildSkipController and
the first switch found in qemuBuildControllerDevStr.
Move SCSI validation from qemu_command into qemu_domain.
Rename/reorder the args in qemuCheckSCSIControllerIOThreads
to match the caller as well as fixing up the comments to
remove the previously removed qemuCaps arg.
Modify the SCSI controller switch during command line building
to account for all virDomainControllerModelSCSI types rather
than using the default label.
Move the checks that various attributes are not set on any controller
other than SCSI controller using virtio-scsi model into the common
controller validate checks.
In 2074ef6cd4 and c56cdf259 (and friends) we've added two
attributes to virtio NICs: rx_queue_size and tx_queue_size.
However, sysadmins might want to set these on per-host basis but
don't necessarily have an access to domain XML (e.g. because they
are generated by some other app). So let's expose them under
qemu.conf (the settings from domain XML still take precedence as
they are more specific ones).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that the controller model is updated during post parse callback,
this code no longer needs to fetch the model based on the capabilities
and can just return the model directly if the controller is found.
Removal of @qemuCaps cascades through various callers which are now
updated to not pass the capabilities.
Now that post parse processing handles setting the SCSI controller
model, there's no need to call qemuDomainGetSCSIControllerModel to
get the "default controller" when building the command line controller
string or when assigning the spaprvio address since the controller
model value will already be filled in.
Rename and rework qemuDomainSetSCSIControllerModel since we're
really not setting the SCSI controller model. Instead the code
is either returning the existing SCSI controller model value, the
default value based on the capabilities, or -1 with the error set.
Rather than repeat multiple steps in order to find the SCSI
controller model, let's combine them into one helper that will
return either the model from the definition or the default
model based on the capabilities.
This patch adds an extra check/error that the controller
that's being found actually exists. This just clarifies that
the error was because the controller doesn't exist rather
than the more generic error that we were unable to determine
the model from qemuDomainSetSCSIControllerModel when a -1
was passed in and the capabilities were unable to find one.
As it turns out virDomainDeviceFindControllerModel was only ever
called for SCSI controllers using VIR_DOMAIN_CONTROLLER_TYPE_SCSI
as a parameter.
So rename to virDomainDeviceFindSCSIController and rather than
return a model, let's return a virDomainControllerDefPtr to let
the caller reference whatever it wants.
Rather than one function serving two purposes, let's split out the
else condition which is checking whether the model can be used
during command line building based on the capabilities.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This wires up the previously added OEM strings XML schema to be able to
generate comamnd line args for QEMU. This requires QEMU >= 2.12 release
containing this patch:
commit 2d6dcbf93fb01b4a7f45a93d276d4d74b16392dd
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Sat Oct 28 21:51:36 2017 +0100
smbios: support setting OEM strings table
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When the -machine pseries,max-cpu-compat=X is supported use
machine parameter instead of -cpu host,compat=X parameter as
that is deprecated now with qemu >= v2.10.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1519146
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
ebtables/iptables processing is skipped for any interface connected to
Open vSwitch (they have their own packet filtering), likewise for
midonet (according to
http://blog.midokura.com/2016/04/midonet-rule-chains), but libvirt
would allow adding a <filterref> to interfaces connected in these
ways, so the user might mistakenly believe they were being protected.
This patch checks for a non-NULL <virtualport> element for an
interface (or its network) and logs an error if <virtualport> and
<filterref> are both present. This could cause some previously working
domains to no longer start, but that's really the whole point of this
patch - to warn people that their filterref isn't protecting them as
they might have thought.
I don't bother checking this during post-parse validation, because
such a check would be incomplete - it's possible that a network would
have a <virtualport> that would be applied to an interface, and you
can't know that until the domain is started.
Resolves: https://bugzilla.redhat.com/1502754
Move the IDE controller check from command line building to
controller def validation. Also explicitly include the avoidance
check for the implicit IDE controller from qemuBuildSkipController.
Cause the IDE case for command line building to generate a
failure if called to add an IDE since that shouldn't happen
if the Validate code did the right thing.
Move the call to qemuDomainCheckCCWS390AddressSupport from
qemuBuildControllerDevStr to qemuDomainDeviceDefValidateController.
This means we will get the qemuCaps from the driver opaque
variable passed to qemuDomainDeviceDefValidate.
For some corner cases, virQEMUCapsHasPCIMultiBus depends on the QEMU
version, which is by design not stored in the status XML and therefore
it cannot be fixed for all existing running domains.
Prefer the controller alias read from the status XML when formatting
PCI addresses and only fall back to using virQEMUCapsHasPCIMultiBus
if the alias is a user alias.
This fixes hotplug after daemon restart for domains not using user
aliases.
Partially reverts commit 937f3195.
https://bugzilla.redhat.com/show_bug.cgi?id=1518148
Even though we never format the device on the QEMU command line,
as it's a platform serial device that's not user-instantiable,
we should still make sure it's available before using it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We should make sure the isa-serial device is available before
formatting it on the QEMU command line.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.
This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The existing implementation set the address type for all serial
devices to spapr-vio, which made it impossible to use other devices
such as usb-serial and pci-serial; moreover, some decisions were
made based on the address type rather than the device type.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1512934
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.
This commit is best viewed with 'git show -w'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Instead duplicating the capability check for each possible target
model, introduce a small helper that matches the target model with
the corresponding capability and collapse all existing checks into
a single one.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we've created a distinction between target type and target
model, with the latter being the concrete device name, it's time to
switch to formatting the model instead of the type.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Instead of waiting until we get to command line generation, we can
validate the target for a char device much earlier.
Move all the checks out of qemuBuildSerialChrDeviceStr() and into
the new fuction. This will later allow us to validate the target
for platform devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is the first step in getting rid of the assumption that
isa-serial is the default target type for serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1425757
The blockdev-add code provides a mechanism to sanely provide user
and password-secret arguments for iscsi without placing them on the
command line to be viewable by a 'ps -ef' type command or needing
to create separate -iscsi devices for each disk/volume found.
So modify the iSCSI command line building to check for the presence
of the capability in order properly setup and use the domain master
secret object to encrypt the password in a secret object and alter
the parameters for the command line to utilize.
Modify the xml2argvtest to exhibit the syntax for both disk and
hostdev configurations.
Rather than picking apart the two pieces we need/want (path, hosts,
and auth)- let's allocate/use a virStorageSourcePtr for iSCSI storage.
The end result is that qemuBuildSCSIiSCSIHostdevDrvStr doesn't need
to "fake" one for the qemuBuildNetworkDriveStr call.
Move the setup of the disk attribute to the disk source prepare function
which will allow proper usage with JSON props and move the fallback
(legacy) generating code into the block which is executed with legacy
options.
As a side-effect of this change we can clean up propagation of 'cfg'
into the command generator.
Also it's nice to see that the test output is the same even when the
value is generated in a different place.
