Commit 68954fb added a configure option --with-systemd_daemon,
which violates the conventions of configure files preferring
dash in all option names. This fixes it, before we hit a
release where the tarball is baked with an awkward name.
* m4/virt-lib.m4 (LIBVIRT_CHECK_LIB, LIBVIRT_CHECK_LIB_ALT)
(LIBVIRT_CHECK_PKG): Favor - over _ in configure option names.
Signed-off-by: Eric Blake <eblake@redhat.com>
Systemd does not forget about the cases, where client service needs to
wait for daemon service to initialize and start accepting new clients.
Setting a dependency in client is not enough as systemd doesn't know
when the daemon has initialized itself and started accepting new
clients. However, it offers a mechanism to solve this. The daemon needs
to call a special systemd function by which the daemon tells "I'm ready
to accept new clients". This is exactly what we need with
libvirtd-guests (client) and libvirtd (daemon). So now, with this
change, libvirt-guests.service is invoked not any sooner than
libvirtd.service calls the systemd notify function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
At this point it has a limited functionality and is highly
experimental. Supported domain operations are:
* define
* start
* destroy
* dumpxml
* dominfo
It's only possible to have only one disk device and only one
network, which should be of type bridge.
We support gluster volumes in domain XML, so we also ought to
support them as a storage pool. Besides, a future patch will
want to take advantage of libgfapi to handle the case of a
gluster device holding qcow2 rather than raw storage, and for
that to work, we need a storage backend that can read gluster
storage volume contents. This sets up the framework.
Note that the new pool is named 'gluster' to match a
<disk type='network'><source protocol='gluster'> image source
already supported in a <domain>; it does NOT match the
<pool type='netfs'><source><target type='glusterfs'>,
since that uses a FUSE mount to a local file name rather than
a network name.
This and subsequent patches have been tested against glusterfs
3.4.1 (available on Fedora 19); there are likely bugs in older
versions that may prevent decent use of gfapi, so this patch
enforces the minimum version tested. A future patch may lower
the minimum. On the other hand, I hit at least two bugs in
3.4.1 that will be fixed in 3.5/3.4.2, where it might be worth
raising the minimum: glfs_readdir is nicer to use than
glfs_readdir_r [1], and glfs_fini should only return failure on
an actual failure [2].
[1] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00085.html
[2] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00086.html
* configure.ac (WITH_STORAGE_GLUSTER): New conditional.
* m4/virt-gluster.m4: new file.
* libvirt.spec.in (BuildRequires): Support gluster in spec file.
* src/conf/storage_conf.h (VIR_STORAGE_POOL_GLUSTER): New pool
type.
* src/conf/storage_conf.c (poolTypeInfo): Treat similar to
sheepdog and rbd.
(virStoragePoolDefFormat): Don't output target for gluster.
* src/storage/storage_backend_gluster.h: New file.
* src/storage/storage_backend_gluster.c: Likewise.
* po/POTFILES.in: Add new file.
* src/storage/storage_backend.c (backends): Register new type.
* src/Makefile.am (STORAGE_DRIVER_GLUSTER_SOURCES): Build new files.
* src/storage/storage_backend.h (_virStorageBackend): Documet
assumption.
Signed-off-by: Eric Blake <eblake@redhat.com>
The python binding now lives in
http://libvirt.org/git/?p=libvirt-python.git
that repo also provides an RPM which is upgrade compatible
with the old libvirt-python sub-RPM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make it much easier to test a configuration built without readline
support, by reusing our existing library probe machinery. It gets
a bit tricky with readline, which does not provide a pkg-config
snippet, and which on some platforms requires one of several
terminal libraries as a prerequiste, but the end result should be
the same default behavior but now with the option to disable things.
* m4/virt-readline.m4 (LIBVIRT_CHECK_READLINE): Simplify by using
LIBVIRT_CHECK_LIB.
* tools/virsh.c: Convert USE_READLINE to WITH_READLINE.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch will allow disabling readline; doing this in an
isolated file instead of configure.ac will make the task easier.
* configure.ac: Move readline code...
* m4/virt-readline.m4: ...here.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since we're about to freeze, it's time to pick up the latest
upstream gnulib. Among other changes, gnulib now guarantees the
use of some -f flags that we were previously manually adding.
* .gnulib: Update to latest, in part for warning improvements.
* m4/virt-compile-warnings.m4 (LIBVIRT_COMPILE_WARNINGS): Drop
flags that are now guaranteed by gnulib.
* bootstrap: Resync to gnulib.
Signed-off-by: Eric Blake <eblake@redhat.com>
Jonathan Lebon reported an issue to me off-list about his build
failing to use qemu because he failed to install yajl-devel. But
I recalled specifically tweaking configure.ac to die in that
situation (commits 350583c, ba9c38b). After a bit more
head-scratching, we found the cause of the regression: commit
654c709 rearranged things so that the qemu version check now
occurs before AC_ARG_WITH has had a chance to set either
$with_qemu or $with_yajl.
Coincidentally, this fix aligns with a documentation patch that
was just posted to the autoconf mailing list :)
http://thread.gmane.org/gmane.comp.sysutils.autoconf.patches/8324
* m4/virt-lib.m4 (LIBVIRT_CHECK_LIB, LIBVIRT_CHECK_LIB_ALT)
(LIBVIRT_CHECK_PKG): Populate defaults earlier.
* configure.ac (AC_ARG_WITH): Likewise for drivers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Autoconf states that AC_HELP_STRING is obsolete, and that new
programs should use AS_HELP_STRING. We also had instances of
not properly quoting the macro usage, and not relying on autoconf's
word-wrapping abilities to avoid long lines. I validated that this
commit has no impact to the generated configure file.
* configure.ac (AC_ARG_WITH, AC_ARG_ENABLE): Autoconf recommends
the use of AS_HELP_STRING. Also, use proper quoting and wrap long
lines.
* m4/virt-apparmor.m4 (LIBVIRT_CHECK_APPARMOR): Likewise.
* m4/virt-selinux.m4 (LIBVIRT_CHECK_SELINUX): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Rather than inlining gl_WARN_ADD loads of time, we can shave about
17k size off of the configure script by delaying it to a cleanup
shell loop.
* m4/virt-compile-warnings.m4 (LIBVIRT_COMPILE_WARNINGS): Track a
list of things to check, rather than inlining multiple checks.
Signed-off-by: Eric Blake <eblake@redhat.com>
It adds an empty space after the package version. Previously the error
message looked like:
"You must install the dbus-1 >= 1.0.0pkg-config module to compile libvirt"
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=994589 complained that
even when using a cross-compiler not named 'gcc', the configure
output confusingly referred to gcc.
* m4/virt-compile-warnings.m4 (LIBVIRT_COMPILE_WARNINGS): Use a
more generic statement in configure output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Partially revert cdd703f's revert of c163410, as linking with clang
with --param=ssp-buffer-size=4 still fails with:
"argument unused during compilation".
The latest mingw headers on Fedora 19 fail to build with gnulib
without an update.
Meanwhile, now that upstream gnulib has better handling of -W
probing for clang, we can drop some of our own solutions in
favor of upstream; thus this reverts commit c1634100, "Correctly
detect warning flags with clang".
* .gnulib: Update to latest, for mingw and clang.
Signed-off-by: Eric Blake <eblake@redhat.com>
FreeBSD ships an old gcc 4.2.1 which generates
bogus code, e.g. getsockopt() call returns
struct xucred with bogus values, which doesn't even
allow to connect to libvirtd:
error: Failed to find group record for gid '1284660778': No error: 0
So roll back to just -fstack-protector on FreeBSD.
Automake already passes all CFLAGS to the linker too, so it
is not necessary to set WARN_LDFLAGS in addition to the
WARN_CFLAGS variable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Clang will happily claim to support any warning flags
unless the -Werror and -Wunknown-warning-option flags
are set. Thus we need to make sure these are set when
testing for clags.
We must also set the clang specific warning flags
-Wno-unused-command-line-argument to avoid a warning
from the ssp-buffer-size flag when linking .o files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virt-compile-warnings.m4 file would do an explicit
check for whether the compile could use the 'diagnostic'
pragma push/pop feature. The src/internal.h file would
then only enable it for GCC >= 4.6
This breaks with clang which supports the pragma but
does not claim GCC 4.6 compat. Export a variable from
the m4 check to the header file so they are consistent.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On win32, all code is position independent and adding -fPIE
to the compiler flags results in warnings being printed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are a number of places which generate cast alignment
warnings, which are difficult or impossible to address. Use
pragmas to disable the warnings in these few places
conf/nwfilter_conf.c: In function 'virNWFilterRuleDetailsParse':
conf/nwfilter_conf.c:1806:16: warning: cast increases required alignment of target type [-Wcast-align]
item = (nwItemDesc *)((char *)nwf + att[idx].dataIdx);
conf/nwfilter_conf.c: In function 'virNWFilterRuleDefDetailsFormat':
conf/nwfilter_conf.c:3238:16: warning: cast increases required alignment of target type [-Wcast-align]
item = (nwItemDesc *)((char *)def + att[i].dataIdx);
storage/storage_backend_mpath.c: In function 'virStorageBackendCreateVols':
storage/storage_backend_mpath.c:247:17: warning: cast increases required alignment of target type [-Wcast-align]
names = (struct dm_names *)(((char *)names) + next);
nwfilter/nwfilter_dhcpsnoop.c: In function 'virNWFilterSnoopDHCPDecode':
nwfilter/nwfilter_dhcpsnoop.c:994:15: warning: cast increases required alignment of target type [-Wcast-align]
pip = (struct iphdr *) pep->eh_data;
nwfilter/nwfilter_dhcpsnoop.c:1004:11: warning: cast increases required alignment of target type [-Wcast-align]
pup = (struct udphdr *) ((char *) pip + (pip->ihl << 2));
nwfilter/nwfilter_learnipaddr.c: In function 'procDHCPOpts':
nwfilter/nwfilter_learnipaddr.c:327:33: warning: cast increases required alignment of target type [-Wcast-align]
uint32_t *tmp = (uint32_t *)&dhcpopt->value;
nwfilter/nwfilter_learnipaddr.c: In function 'learnIPAddressThread':
nwfilter/nwfilter_learnipaddr.c:501:43: warning: cast increases required alignment of target type [-Wcast-align]
struct iphdr *iphdr = (struct iphdr*)(packet +
nwfilter/nwfilter_learnipaddr.c:538:43: warning: cast increases required alignment of target type [-Wcast-align]
struct iphdr *iphdr = (struct iphdr*)(packet +
nwfilter/nwfilter_learnipaddr.c:544:48: warning: cast increases required alignment of target type [-Wcast-align]
struct udphdr *udphdr= (struct udphdr *)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
By passing the flags -z relro -z now to the linker, we can force
it to resolve all library symbols at startup, instead of on-demand.
This allows it to then make the global offset table (GOT) read-only,
which makes some security attacks harder.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
PIE (position independent executable) adds security to executables
by composing them entirely of position-independent code (PIC. The
.so libraries already build with -fPIC. This adds -fPIE which is
the equivalent to -fPIC, but for executables. This for allows Exec
Shield to use address space layout randomization to prevent attackers
from knowing where existing executable code is during a security
attack using exploits that rely on knowing the offset of the
executable code in the binary, such as return-to-libc attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virt-dbus.m4 check for DBus was preserving $LIBS before
modifying it. Except it wasn't. It was preserving another
copy of $CFLAGS. The result was that after the check completed,
$LIBS got polluted with $CFLAGS
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some places missed the conversion from LIBCURL_{CFLAGS,LIBS} to
CURL_{CFLAGS,LIBS}, and a part of curl check was left in
configure.ac instead of m4/virt-curl.m4 by mistake
There are many aspects of the guest XML which result in the
SELinux driver applying file labelling. With the increasing
configuration options it is desirable to test this behaviour.
It is not possible to assume that the test suite has the
ability to set SELinux labels. Most filesystems though will
support extended attributes. Thus for the purpose of testing,
it is possible to extend the existing LD_PRELOAD hack to
override setfilecon() and getfilecon() to simply use the
'user.libvirt.selinux' attribute for the sake of testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This converts the libssh2 configure check to use LIBVIRT_CHECK_PKG.
Previously it would check version 1.0 and 1.3, but this simplifies
things to just require version 1.3
Problem introduced in commit cd699ed.
* m4/virt-lib.m4 (LIBVIRT_CHECK_LIB, LIBVIRT_CHECK_PKG): Set up
direct expansions, since autoconf 2.59 lacked m4_expand.
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
