https://bugzilla.redhat.com/show_bug.cgi?id=887017 reports that
even though libvirt attempts to set fs.aio-max-nr via sysctl,
the file was installed with the wrong name and gets ignored by
sysctl. Furthermore, 'man systcl.d' recommends that packages
install into hard-coded /usr/lib/sysctl.d (even when libdir is
/usr/lib64), so that sysadmins can use /etc/sysctl.d for overrides.
* daemon/Makefile.am (install-sysctl, uninstall-sysctl): Use
correct location.
* libvirt.spec.in (network_files): Reflect this.
See also commit 66ff2dd, where we avoided installing these files
as executables.
* daemon/Makefile.am (libvirtd.service): Drop chmod.
* tools/Makefile.am (libvirt-guests.service): Likewise.
* src/Makefile.am (virtlockd.service, virtlockd.socket):
Likewise.
We had several different styles of .in conversion in our Makefiles:
ALLCAPS, @ALLCAPS@, @lower@, ::lower::
Canonicalize on one form, to make it easier to copy and paste
between .in files.
Also, we were using some non-portable sed constructs: \@ is an
undefined escape sequence (it happens to be @ itself in GNU sed,
but POSIX allows it to mean something else), as well as risky
behavior (failure to consistently quote things means a space
in $(sysconfdir) could throw things off; also, Autoconf recommends
using | rather than , or ! in the s||| operator, because | has to
be quoted in shell and is therefore less likely to appear in file
names than , or !).
Fix all of these uses to follow the same syntax.
* daemon/libvirtd.8.in: Switch to @var@.
* tools/virt-xml-validate.in: Likewise.
* tools/virt-pki-validate.in: Likewise.
* src/locking/virtlockd.init.in: Likewise.
* daemon/Makefile.am: Prefer | over ! in sed.
(libvirtd.8): Prefer consistent substitution.
(libvirtd.init, libvirtd.service): Avoid non-portable sed.
* tools/Makefile.am (libvirt-guests.sh, libvirt-guests.init)
(libvirt-guests.service): Likewise.
(virt-xml-validate, virt-pki-validate, virt-sanlock-cleanup):
Prefer consistent capitalization.
* src/Makefile.am (virtlockd.init, virtlockd.service)
(virtlockd.socket): Prefer consistent substitution.
There's been a few bugs about an expected error from polkit:
https://bugzilla.redhat.com/show_bug.cgi?id=873799https://bugzilla.redhat.com/show_bug.cgi?id=872166
The error is:
Authorization requires authentication but no agent is available.
The error means that polkit needs a password, but there is no polkit
agent registered in your session. Polkit agents are the bit of UI that
pop up and actually ask for your password.
Preface the error with the string 'polkit:' so folks can hopefully
make more sense of it.
As of 1a50ba2cb0 qemu capabilities probing
takes longer since we timeout waiting for the monitor socket. When
probing qemu for different architectures this can add up so the daemon
auto shutdown timeout is reached and the client doesn't have a chance
to connect. To avoid that inhibit daemon shutdown during driver
initialization (which includes capabilities probing).
This fixes
http://honk.sigxcpu.org:8001/job/libvirt-tck-debian-wheezy-qemu-session/227/
https://bugzilla.redhat.com/show_bug.cgi?id=830201
The initscript and upstart services depend on dbus starting
before libvirtd. When we first wrote the systemd script, we
tried to do the same, but we depended on dbus.target (which
does not exist) in comparison to network.target (which does
exist), so we removed that in commit 4c7973e. But we still
need dbus up and running first, especially now that we want
to support shutdown inhibition via dbus (whereas we originally
needed dbus only for firewall control).
http://www.freedesktop.org/software/systemd/man/systemd.target.html
explains how a target (such as network.target) is just a collection
of common services bundled together, and why we want network.target
but dbus.service.
* daemon/libvirtd.service.in (Unit): Depend on dbus starting
first.
When the session dies or when the system is going to be shut down
we issue a virStateStop() call to instruct drivers to prepare to
be stopped. This will remove any previously acquire inhibitions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This will simplify the refactoring of the ESX storage driver to support
a VMFS and an iSCSI backend.
One of the tasks the storage driver needs to do is to decide which backend
driver needs to be invoked for a given request. This approach extends
virStoragePool and virStorageVol to store extra parameters:
1. privateData: stores pointer to respective backend storage driver.
2. privateDataFreeFunc: stores cleanup function pointer.
virGetStoragePool and virGetStorageVol are modfied to accept these extra
parameters as user params. virStoragePoolDispose and virStorageVolDispose
checks for cleanup operation if available.
The private data pointer allows the ESX storage driver to store a pointer
to the used backend with each storage pool and volume. This avoids the need
to detect the correct backend in each storage driver function call.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It turns out that calling virNodeGetCPUMap(conn, NULL, NULL, 0)
is both useful, and with Viktor's patches, common enough to
optimize. Since this interface hasn't been released yet, we
can change the RPC call.
A bit more background on the optimization - learning the cpu count
is a single file read (/sys/devices/system/cpu/possible), but
learning the number of online cpus can possibly trigger a file
read per cpu, depending on the age of the kernel, and all wasted
if the caller passed NULL for both arguments.
* src/nodeinfo.c (nodeGetCPUMap): Avoid bitmap when not needed.
* src/remote/remote_protocol.x (remote_node_get_cpu_map_args):
Supply two separate flags for needed arguments.
* src/remote/remote_driver.c (remoteNodeGetCPUMap): Update
caller.
* daemon/remote.c (remoteDispatchNodeGetCPUMap): Likewise.
* src/remote_protocol-structs: Regenerate.
Commit 905be03d2 quit using the abstract namespace, but didn't
update the --help text to match.
* daemon/libvirtd.c (daemonUsage): Correct socket listing.
Patch 61299a1c fixed a long-standing pod error in the man page.
But we should be preventing these up front.
See also https://bugzilla.redhat.com/show_bug.cgi?id=870273
* tools/Makefile.am (virt-xml-validate.1, virt-pki-validate.1)
(virt-host-validate.1, virt-sanlock-cleanup.8, virsh.1): Reject
pod conversion errors.
* daemon/Makefile.am ($(srcdir)/libvirtd.8.in): Likewise.
This commit changes the behavior of LIBVIRT_DEBUG=1 libvirtd:
$ git show 7022b09111
commit 7022b09111
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Sep 27 13:13:09 2012 +0100
Automatically enable systemd journal logging
Probe to see if the systemd journal is accessible, and if
so enable logging to the journal by default, rather than
stderr (current default under systemd).
Previously 'LIBVIRT_DEBUG=1 /usr/sbin/libvirtd' would show all debug
output to stderr, now it send debug output to the journal.
Only use the journal by default if running in daemon mode, or
if stdin is _not_ a tty. This should make libvirtd launched from
systemd use the journal, but preserve the old behavior in most
situations.
- Defined the wire protocol format for virNodeGetCPUMap and its
arguments
- Implemented remote method invocation (remoteNodeGetCPUMap)
- Implemented method dispatcher (remoteDispatchNodeGetCPUMap)
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
On F17 at least, every time libvirtd starts we get this in syslog:
libvirtd: Could not find keytab file: /etc/libvirt/krb5.tab: No such file or directory
This comes from cyrus-sasl, and happens regardless of whether the
gssapi plugin is requested, which is what actually uses
/etc/libvirt/krb5.tab.
While cyrus-sasl shouldn't complain, we can easily make it shut up by
commenting out the keytab value by default.
Also update the keytab comment to the more modern one from qemu's
sasl config file.
Add two new APIs virNetServerClientNewPostExecRestart and
virNetServerClientPreExecRestart which allow a virNetServerClientPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of the connected socket associated
with the client
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds support for SUSPEND_DISK event; both lifecycle and
separated. The support is added for QEMU, machines are changed to
PMSUSPENDED, but as QEMU sends SHUTDOWN afterwards, the state changes
to shut-off. This and much more needs to be done in order for libvirt
to work with transient devices, wake-ups etc. This patch is not
aiming for that functionality.
- Add the XML header so vim gives us syntax highlighting
- polkit-policy-file-validate hasn't existed for 3 years
- Permissions comment was not accurate
Probe to see if the systemd journal is accessible, and if
so enable logging to the journal by default, rather than
stderr (current default under systemd).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virInitialize function initializes logging from the env,
so there is no need for another call to virLogSetFromEnv
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Continue consolidation of process functions by moving some
helpers out of command.{c,h} into virprocess.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCommand prefix was inappropriate because the API
does not use any virCommandPtr object instance. This
API closely related to waitpid/exit, so use virProcess
as the prefix
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.
Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.
* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
* src/rpc/gendispatch.pl: (virNodeSetMemoryParameters is the
the special one which needs a connection object as the first
argument, improve the generator to support it).
* daemon/remote.c: (Implement the server side handler for
virDomainGetMemoryParameters)
* src/remote/remote_driver.c: (Implement the client side handler
for virDomainGetMemoryParameters)
* src/remote/remote_protocol.x: (New RPC procedures for the two
new APIs and structs to represent the args and ret for it)
* src/remote_protocol-structs: Likewise
The RPC generator doesn't support returning list of object yet, this patch
does the work manually.
* daemon/remote.c:
Implement the server side handler remoteDispatchConnectListAllSecrets.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllSecrets.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_SECRETS and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
The RPC generator doesn't support returning list of object yet, this patch
do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllNWFilters.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllNWFilters.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_NWFILTERS and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
The RPC generator doesn't support returning list of object yet, this patch
does the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllNodeDevices.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllNodeDevices.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_INTERFACES and
The RPC generator doesn't support returning list of object yet, this patch
do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllInterfaces.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllInterfaces.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_INTERFACES and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
The RPC generator doesn't support returning list of object, this patch
do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllNetworks.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllNetworks.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_NETWORKS and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
The RPC generator doesn't returning support list of object, this
patch do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchStoragePoolListAllVolumes
* src/remote/remote_driver.c:
Add remote driver handler remoteStoragePoolListAllVolumes
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_STORAGE_POOL_LIST_ALL_VOLUMES and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
The unused reason parameter of PM{Suspend,Wakeup} event callbacks was
completely ignored in lot of places and those events were not actually
working at all.
The RPC generator doesn't support returning list of object, this patch does
the work manually.
* daemon/remote.c:
Implement the server side handler remoteDispatchConnectListAllStoragePools
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllStoragePools.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_STORAGE_POOLS and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
