This introduces a new event type
VIR_DOMAIN_EVENT_ID_GRAPHICS
The same event can be emitted in 3 scenarios
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_CONNECT = 0,
VIR_DOMAIN_EVENT_GRAPHICS_INITIALIZE,
VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT,
} virDomainEventGraphicsPhase;
Connect/disconnect are triggered at socket accept/close.
The initialize phase is immediately after the protocol
setup and authentication has completed. ie when the
client is authorized and about to start interacting with
the graphical desktop
This event comes with *a lot* of potential information
- IP address, port & address family of client
- IP address, port & address family of server
- Authentication scheme (arbitrary string)
- Authenticated subject identity. A subject may have
multiple identities with some authentication schemes.
For example, vencrypt+sasl results in a x509dname
and saslUsername identities.
This results in a very complicated callback :-(
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4,
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV6,
} virDomainEventGraphicsAddressType;
struct _virDomainEventGraphicsAddress {
int family;
const char *node;
const char *service;
};
typedef struct _virDomainEventGraphicsAddress virDomainEventGraphicsAddress;
typedef virDomainEventGraphicsAddress *virDomainEventGraphicsAddressPtr;
struct _virDomainEventGraphicsSubject {
int nidentity;
struct {
const char *type;
const char *name;
} *identities;
};
typedef struct _virDomainEventGraphicsSubject virDomainEventGraphicsSubject;
typedef virDomainEventGraphicsSubject *virDomainEventGraphicsSubjectPtr;
typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr conn,
virDomainPtr dom,
int phase,
virDomainEventGraphicsAddressPtr local,
virDomainEventGraphicsAddressPtr remote,
const char *authScheme,
virDomainEventGraphicsSubjectPtr subject,
void *opaque);
The wire protocol is similarly complex
struct remote_domain_event_graphics_address {
int family;
remote_nonnull_string node;
remote_nonnull_string service;
};
const REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX = 20;
struct remote_domain_event_graphics_identity {
remote_nonnull_string type;
remote_nonnull_string name;
};
struct remote_domain_event_graphics_msg {
remote_nonnull_domain dom;
int phase;
remote_domain_event_graphics_address local;
remote_domain_event_graphics_address remote;
remote_nonnull_string authScheme;
remote_domain_event_graphics_identity subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>;
};
This is currently implemented in QEMU for the VNC graphics
protocol, but designed to be usable with SPICE graphics in
the future too.
* daemon/remote.c: Dispatch graphics events to client
* examples/domain-events/events-c/event-test.c: Watch for
graphics events
* include/libvirt/libvirt.h.in: Define new graphics event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle graphics events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for VNC events and emit a libvirt graphics event
* src/remote/remote_driver.c: Receive and dispatch graphics
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
graphics events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for VNC_CONNECTED,
VNC_INITIALIZED & VNC_DISCONNETED events from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_IO_ERROR_NONE = 0,
VIR_DOMAIN_EVENT_IO_ERROR_PAUSE,
VIR_DOMAIN_EVENT_IO_ERROR_REPORT,
} virDomainEventIOErrorAction;
In addition it has the source path of the disk that had the
error and its unique device alias. It does not include the
target device name (/dev/sda), since this would preclude
triggering IO errors from other file backed devices (eg
serial ports connected to a file)
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_WATCHDOG
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_WATCHDOG_NONE = 0,
VIR_DOMAIN_EVENT_WATCHDOG_PAUSE,
VIR_DOMAIN_EVENT_WATCHDOG_RESET,
VIR_DOMAIN_EVENT_WATCHDOG_POWEROFF,
VIR_DOMAIN_EVENT_WATCHDOG_SHUTDOWN,
VIR_DOMAIN_EVENT_WATCHDOG_DEBUG,
} virDomainEventWatchdogAction;
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventWatchdogCallback)(virConnectPtr conn,
virDomainPtr dom,
int action,
void *opaque);
* daemon/remote.c: Dispatch watchdog events to client
* examples/domain-events/events-c/event-test.c: Watch for
watchdog events
* include/libvirt/libvirt.h.in: Define new watchdg event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle watchdog events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for watchdogs and emit a libvirt watchdog event
* src/remote/remote_driver.c: Receive and dispatch watchdog
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
watchdog events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for WATCHDOG event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_RTC_CHANGE
This event includes the new UTC offset measured in seconds.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventRTCChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
long long utcoffset,
void *opaque);
If the guest XML configuration for the <clock> is set to
offset='variable', then the XML will automatically be
updated with the new UTC offset value. This ensures that
during migration/save/restore the new offset is preserved.
* daemon/remote.c: Dispatch RTC change events to client
* examples/domain-events/events-c/event-test.c: Watch for
RTC change events
* include/libvirt/libvirt.h.in: Define new RTC change event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle RTC change events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for RTC changes and emit a libvirt RTC change event
* src/remote/remote_driver.c: Receive and dispatch RTC change
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
RTC change events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for RTC_CHANGE event
from QEMU monitor
The reboot event is not a normal lifecycle event, since the
virtual machine on the host does not change state. Rather the
guest OS is resetting the virtual CPUs. ie, the QEMU process
does not restart. Thus, this does not belong in the current
lifecycle events callback.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_REBOOT
It takes no parameters, besides the virDomainPtr, so it can
use the generic callback signature.
* daemon/remote.c: Dispatch reboot events to client
* examples/domain-events/events-c/event-test.c: Watch for
reboot events
* include/libvirt/libvirt.h.in: Define new reboot event ID
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle reboot events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for reboots and emit a libvirt reboot event
* src/remote/remote_driver.c: Receive and dispatch reboot
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
reboot events
The current internal domain events API tracks callbacks based on
the function pointer, and only supports lifecycle events. This
adds new internal APIs for registering callbacks for other event
types. These new APIs are postfixed with the word 'ID' to indicate
that they operated based on event ID, instead of hardcoded to
lifecycle events
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Add new APIs for handling callbacks
for non-lifecycle events
The internal domain events APIs are designed to handle the lifecycle
events. This needs to be refactored to allow arbitrary new event
types to be handled.
* The signature of virDomainEventDispatchFunc changes to use
virConnectDomainEventGenericCallback instead of the lifecycle
event specific virConnectDomainEventCallback
* Every registered callback gains a unique ID to allow its
removal based on ID, instead of function pointer
* Every registered callback gains an 'eventID' to allow callbacks
for different types of events to be distinguished
* virDomainEventDispatch is adapted to filter out callbacks
whose eventID does not match the eventID of the event being
dispatched
* virDomainEventDispatch is adapted to filter based on the
domain name and uuid, if this filter is set for a callback.
* virDomainEvent type/detail fields are moved into a union to
allow different data fields for other types of events to be
added later
* src/conf/domain_event.h, src/conf/domain_event.c: Refactor
to allow handling of different types of events
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/xen/xen_driver.c: Change dispatch function signature
to use virConnectDomainEventGenericCallback
The virtual box driver was directly accesing the domain events
structs instead of using the APIs provided. To prevent this kind
of abuse, make the struct definitions private, forcing use of the
internal APIs. This requires adding one extra internal API.
* src/conf/domain_event.h, src/conf/domain_event.c: Move
virDomainEventCallback and virDomainEvent structs into
the source file instead of header
* src/vbox/vbox_tmpl.c: Use official APIs for dispatching domain
events instead of accessing structs directly.
Before, this function would blindly accept an invalid def->dst
and then abuse the idx=-1 it would get from virDiskNameToIndex,
when passing it invalid strings like "xvda:disk" and "sda1".
Now, this function returns -1 upon failure.
* src/conf/domain_conf.c (virDomainDiskDefAssignAddress): as above.
Update callers.
* src/conf/domain_conf.h: Update prototype.
* src/qemu/qemu_conf.c: Update callers.
If a special cache strategy for a disk has been specified in a domain
definition, but no driverName has been set, virDomainGetXMLDesc would not
include the <driver> tag at all.
* src/conf/domain_conf.c: make sure any <driver> tag setting is
serialized if set.
This allows the config to have a setting that means "leave it alone",
eg when building a pool where the directory already exists the user
may want the current uid/gid of the directory left intact. This
actually gets us back to older behavior - before recent changes to the
pool building code, we weren't as insistent about honoring the uid/gid
settings in the XML, and virt-manager was taking advantage of this
behavior.
As a side benefit, removing calls to getuid/getgid from the XML
parsing functions also seems like a good idea. And having a default
that is different from a common/useful value (0 == root) is a good
thing in general, as it removes ambiguity from decisions (at least one
place in the code was checking for (perms.uid == 0) to see if a
special uid was requested).
Note that this will only affect newly created pools and volumes. Due
to the way that the XML is parsed, then formatted for newly created
volumes, all existing pools/volumes already have an explicit uid and
gid set.
src/conf/storage_conf.c: Remove calls to setuid/setgid for default values
of uid/gid, and set them to -1 instead
src/storage/storage_backend.c:
src/storage/storage_backend_fs.c:
Make account for the new default values of perms.uid
and perms.gid.
The storage backend implementations all presume that the XML parser
is validating correctness of the source specification. The check for
a source device was lost at some point. This allowed for a potential
crash in the disk backend. Re-introduce the sanity check
* src/conf/storage_conf.c: Re-add check for source device
This extends the XML to allow for
<clock offset='timezone' timezone='Europe/Paris'/>
This is useful if the admin has not configured any timezone on the
host OS, but still wants to synchronize a guest to a specific one.
* src/conf/domain_conf.h, src/conf/domain_conf.c: Support extra
'timezone' attribute on clock configuration
* docs/schemas/domain.rng: Add 'timezone' attribute
* src/xen/xend_internal.c, src/xen/xm_internal.c: Reject configs
with a configurable timezone
This introduces a third option for clock offset synchronization,
that allows an arbitrary / variable adjustment to be set. In
essence the XML contains the time delta in seconds, relative to
UTC.
<clock offset='variable' adjustment='123465'/>
The difference from 'utc' mode, is that management apps should
track adjustments and preserve them at next reboot.
* docs/schemas/domain.rng: Schema for new clock mode
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parse
new clock time delta
* src/libvirt_private.syms, src/util/xml.c, src/util/xml.h: Add
virXPathLongLong() method
The XML will soon be extended to allow more than just a simple
localtime/utc boolean flag. This change replaces the plain
'int localtime' with a separate struct to prepare for future
extension
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a new
virDomainClockDef structure
* src/libvirt_private.syms: Export virDomainClockOffsetTypeToString
and virDomainClockOffsetTypeFromString
* src/qemu/qemu_conf.c, src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
src/xen/xm_internal.c: Updated to use new structure for localtime
While building under RHEL-5, I got a compile warning because
virDomainObjFormat was defined but not used. That came about
because in RHEL-5 we build with "#define PROXY", and
virDomainObjFormat is only used with !PROXY. Move the
define.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
We were using 'Y' to mean exabyte, when the correct abbreviation would be
'E' ('Y' is yettabyte, which is exabyte * 1024 * 1024). While it isn't
strictly backwards compatible, I highly doubt anyone was actually using
this broken behavior, so I don't see any harm in in dropping 'Y' handling.
Add support for virtio-serial by defining a new 'virtio' channel target type
and a virtio-serial controller. Allows the following to be specified in a
domain:
<controller type='virtio-serial' index='0' ports='16' vectors='4'/>
<channel type='pty'>
<target type='virtio' name='org.linux-kvm.port.0'/>
<address type='virtio-serial' controller='0' bus='0'/>
</channel>
* docs/schemas/domain.rng: Add virtio-serial controller and virtio
channel type.
* src/conf/domain_conf.[ch]: Domain parsing/serialization for
virtio-serial controller and virtio channel.
* tests/qemuxml2xmltest.c
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: add domain xml
parsing test
* src/libvirt_private.syms src/qemu/qemu_conf.c:
virDomainDefAddDiskControllers() renamed to
virDomainDefAddImplicitControllers()
Remove virDomainDevicePCIAddressEqual and virDomainDeviceDriveAddressEqual,
which are defined but not used anywhere.
* src/conf/domain_conf.[ch] src/libvirt_private.syms: Remove
virDomainDevicePCIAddressEqual and virDomainDeviceDriveAddressEqual.
This part adds support to domain_conf.{c|h} for parsing the new
interface XML of type 'direct'. The parsed mode is now stored as
an int.
* src/conf/domain_conf.c src/conf/domain_conf.h: extend parsing code
* src/util/macvtap.h: empty header to not break compilation
Use the ATTRIBUTE_NONNULL annotation to mark some virConnectPtr
args as mandatory non-null so the compiler can warn of mistakes
* src/conf/domain_event.h: All virConnectPtr args must be non-null
* src/qemu/qemu_conf.h: qemudBuildCommandLine and
qemudNetworkIfaceConnect() must be given non-null connection
* tests/qemuxml2argvtest.c: Provide a non-null (dummy) connection to
qemudBuildCommandLine()
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in secret_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in interface_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in cpu_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in storage_conf.{h,c} and storage_encryption_conf.{h,c}
and update all callers to match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in network_conf.{h,c} and update all callers to
match
When attaching a USB host device based on vendor/product, libvirt
will resolve the vendor/product into a device/bus pair. This means
that when printing XML we should allow device/bus info to be printed
at any time if present
* src/conf/domain_conf.c, docs/schemas/domain.rng: Allow USB device
bus info alongside vendor/product
The current way of assigning names to the host network backend and
NIC device in QEMU was over complicated, by varying naming scheme
based on the NIC model and backend type. This simplifies the naming
to simply be 'net0' and 'hostnet0', allowing code to easily determine
the host network name and vlan based off the primary device alias
name 'net0'. This in turn allows removal of alot of QEMU specific
code from the XML parser, and makes it easier to assign new unique
names for NICs that are hotplugged
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove hostnet_name
and vlan fields from virNetworkDefPtr
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c:
Use a single network alias naming scheme regardless of NIC type
or backend type. Determine VLANs from the alias name.
* tests/qemuxml2argvdata/qemuxml2argv-net-eth-names.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args: Update
for new simpler naming scheme
The virDomainDeviceInfoIterate() function will provide a
convenient way to iterate over all devices in a domain.
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add virDomainDeviceInfoIterate()
function.
This reverts commit cdc42d0a48.
As DanB pointed out, this patch is actually wrong. The real
bug that was causing me to see this problem is a bug
introduced in a RHEL-5 libvirt snapshot, and I'm going to
fix the real bug there.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The <console> tag is supposed to result in addition of a single
<serial> device for HVM guests. The 'targetType' attribute was
missing though causing the compatibility code to add a second
<console> device
* src/conf/domain_conf.c: Set targetType for serial device
When libvirtd shuts down, it places a <state/> tag in the XML
state file it writes out for guests with PCI passthrough
devices. For devices that are attached at bootup time, the
state tag is empty. However, at libvirtd startup time, it
ignores anything with a <state/> tag in the XML, effectively
hiding the guest.
This patch remove the check for VIR_DOMAIN_XML_INTERNAL_STATUS
when parsing the XML.
* src/conf/domain_conf.c: remove VIR_DOMAIN_XML_INTERNAL_STATUS
flag check in virDomainHostdevSubsysPciDefParseXML()
Allows the initiator to use a variety of IQNs rather than just the
system IQN when creating iSCSI pools.
* docs/schemas/storagepool.rng: extends the syntax with <iqn name="..."/>
* src/conf/storage_conf.[ch]: read and stores the iqn name
* src/storage/storage_backend_iscsi.[ch]: implement the IQN selection
when detected
* src/conf/domain_conf.c (virDomainChrDefFormat): Plug a leak on
an error path, and at the same time, eliminate the need for a
"cleanup:" block. Before, the "return -1" after the switch
would leak an "addr" string. Now, by reversing the port,addr-
getting blocks we can free "addr" immediately and skip the goto.
The 'int virInterfaceIsActive()' method was directly returning the
value of the 'int active:1' bitfield in virIntefaceDefPtr. A bitfield
with a signed integer, will hold the values 0 and -1, not 0 and +1
as might be expected. This meant that virInterfaceIsActive() was
always returning -1 when the interface was active, not +1 & thus all
callers thought an error had occurred. To protect against this kind
of mistake again, change all bitfields to be unsigned ints
* daemon/libvirtd.h, src/conf/domain_conf.h, src/conf/interface_conf.h,
src/conf/network_conf.h: Change bitfields to unsigned int.
This was accomplished in xml parsing by doing away with the
stripped-down virInterfaceBareDef object, and just always using
virInterfaceDef, but with restrictions in certain places (eg, the type
of subordinate interface allowed in parsing depends on the parent
interface).
xml formatting was similarly adjusted. In addition, the formatting
functions keep track of the level of interface nesting, and insert
extra leading spaces on each line accordingly (using %*s).
The only change in formatted xml from previous (aside frmo supporting
new combinations of interface types) is that the subordinate ethernet
interfaces take up 2 lines rather than one, eg:
<interface type='ethernet' name='eth0'>
</interface>
instead of:
<interface type='ethernet' name='eth0'/>
Currently CPU topology may only be specified together with CPU model:
<cpu match='exact'>
<model>name</model>
<topology sockets='1' cores='2' threads='3'/>
</cpu>
This patch allows for CPU topology specification without the need for
also specifying CPU model:
<cpu>
<topology sockets='1' cores='2' threads='3'/>
</cpu>
'match' attribute and 'model' element are made optional with the
restriction that 'match' attribute has to be set when 'model' is
present.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Although the serial, parallel, chanel, input & fs devices do
not have PCI address info, they can all have device aliases.
Thus it neccessary to associate the virDomainDeviceInfo data
with them all.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add hooks for
parsing / formatting device info for serial, parallel, channel
input and fs devices.
* docs/schemas/domain.rng: Associate device info with character
devices, input & fs device
This patch introduces the support for giving all devices a short,
unique name, henceforth known as a 'device alias'. These aliases
are not set by the end user, instead being assigned by the hypervisor
if it decides it want to support this concept.
The QEMU driver sets them whenever using the -device arg syntax
and uses them for improved hotplug/hotunplug. it is the intent
that other APIs (block / interface stats & device hotplug) be
able to accept device alias names in the future.
The XML syntax is
<alias name="video0"/>
This may appear in any type of device that supports device info.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a 'alias'
field to virDomainDeviceInfo struct & parse/format it in XML
* src/libvirt_private.syms: Export virDomainDefClearDeviceAliases
* src/qemu/qemu_conf.c: Replace use of "nic_name" field with the
standard device alias
* src/qemu/qemu_driver.c: Clear device aliases at shutdown
The PCI device addresses are only valid while the VM is running,
since they are auto-assigned by QEMU. After shutdown they must
all be cleared. Future QEMU driver enhancement will allow for
persistent PCI address assignment
* src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms
Add virDomainDefClearPCIAddresses() method for wiping out auto assigned
PCI addresses
* src/qemu/qemu_driver.c: Clear PCI addresses at VM shutdown
Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
method for populating disk controllers, and call it after
parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
data to all data files which don't have it already
It is perfectly acceptable to have multiple sound devices of
same type in guest configuration. If the underlying hypervisor
does not like this, it is its job to complain, not the XML
parser's
* src/conf/domain_conf.c: Remove hack which deleted duplicated
sound device models.
* tests/xml2sexprdata/xml2sexpr-fv-sound.xml: Remove duplicate
models
* src/conf/domain_conf.c: add defaults for the video device
* src/esx/esx_vmx.[ch]: add VNC support to the VMX handling
* tests/vmx2xmltest.c, tests/xml2vmxtest.c: add tests for the VNC support
This augments virDomainDevice with a <controller> element
that is used to represent disk controllers (e.g., scsi
controllers). The XML format is given by
<controller type="scsi" index="<num>">
<address type="pci" domain="0xNUM" bus="0xNUM" slot="0xNUM"/>
</controller>
where type denotes the disk interface (scsi, ide,...), index
is an integer that identifies the controller for association
with disks, and the <address> element specifies the controller
address on the PCI bus as described in previous commits
The address element can be omitted; in this case, an address
will be assigned automatically.
Most of the code in this patch is from Wolfgang Mauerer's
previous disk controller series
* docs/schemas/domain.rng: Define syntax for <controller>
XML element
* src/conf/domain_conf.c, src/conf/domain_conf.h: Define
virDomainControllerDef struct, and routines for parsing
and formatting XML
* src/libvirt_private.syms: Add virDomainControllerInsert
and virDomainControllerDefFree
When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
to all XML files
Add the virDomainDeviceAddress information to the sound, video
and watchdog devices. This means all of them gain the new XML
element
<address .... />
This brings them upto par with disk/net/hostdev devices which
already have address info
* src/conf/domain_conf.h: Add virDomainDeviceAddress to sound,
video & watchdog device struts.
* src/conf/domain_conf.c: Hook up parsing/formatting for
virDomainDeviceAddress in sound, video & watchdog devices
* docs/schemas/domain.rng: Associate device address info
with sound, video & watchdog
Introduce a new structure
struct _virDomainDeviceDriveAddress {
unsigned int controller;
unsigned int bus;
unsigned int unit;
};
and plug that into virDomainDeviceAddress and generates XML that
looks like
<address type='drive' controller='1' bus='0' unit='5'/>
This syntax will be used by the QEMU driver to explicitly control
how drives are attached to the bus
* src/conf/domain_conf.h, src/conf/domain_conf.c: Parsing and
formatting of drive addresses
* docs/schemas/domain.rng: Define new address format for drives
All guest devices now use a common device address structure
summarized by:
enum virDomainDeviceAddressType {
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE,
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI,
};
struct _virDomainDevicePCIAddress {
unsigned int domain;
unsigned int bus;
unsigned int slot;
unsigned int function;
};
struct _virDomainDeviceInfo {
int type;
union {
virDomainDevicePCIAddress pci;
} addr;
};
This replaces the anonymous structs in Disk/Net/Hostdev data
structures. Where available, the address is *always* printed
in the XML file, instead of being hidden in the internal state
file.
<address type='pci' domain='0x0000' bus='0x1e' slot='0x07' function='0x0'/>
The structure definition is based on Wolfgang Mauerer's disk
controller patch series.
* docs/schemas/domain.rng: Define the <address> syntax and
associate it with disk/net/hostdev devices
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: APIs for parsing/formatting address
information. Also remove the QEMU specific 'pci_addr' attributes
* src/qemu/qemu_driver.c: Replace use of 'pci_addr' attrs with
new standardized format.
Found while trying to cross-compile libvirt on Fedora 12 for Windows.
gnulib redefines 'close' to 'close_used_without_including_unistd_h'
in sys/socket.h if winsock2.h is present and unistd.h has not been
included before sys/socket.h. Reorder some includes to fix this.
* include/libvirt/virterror.h src/util/virterror.c: add new domain
VIR_FROM_CPU for errors
* src/conf/cpu_conf.c src/conf/cpu_conf.h: new parsing module
* src/Makefile.am proxy/Makefile.am: include new files
* src/conf/capabilities.[ch] src/conf/domain_conf.[ch]: reference
new code
* src/libvirt_private.syms: private export of new entry points
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
Since the monitor I/O is processed out of band from the main
thread(s) invoking monitor commands, the virDomainObj may be
deleted by the I/O thread. The qemuDomainObjBeginJob takes an
extra reference to protect against final deletion, but this
reference is released by the corresponding EndJob call. THus
after the EndJob call it may not be valid to reference the
virDomainObj any more. To allow callers to detect this, the
EndJob call is changed to return the remaining reference count.
* src/conf/domain_conf.c: Make virDomainObjUnref return the
remaining reference count
* src/qemu/qemu_driver.c: Avoid referencing virDomainObjPtr
after qemuDomainObjEndJob if it has been deleted.
Now that drivers are using a private domain object state blob,
the virDomainObjFormat/Parse methods are no longer able to
directly serialize all neccessary state to/from XML. It is
thus neccessary to introduce a pair of callbacks fo serializing
private state.
The code for serializing vCPU PIDs and the monitor device
config can now move out of domain_conf.c and into the
qemu_driver.c where they belong.
* src/conf/capabilities.h: Add callbacks for serializing private
state to/from XML
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove the
monitor, monitor_chr, monitorWatch, nvcpupids and vcpupids
fields from virDomainObjPtr. Remove code that serialized
those fields
* src/libvirt_private.syms: Export virXPathBoolean
* src/qemu/qemu_driver.c: Add callbacks for serializing monitor
and vcpupid data to/from XML
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Pass monitor
char device config into qemuMonitorOpen directly.
* src/conf/domain_conf.c: don't call virDomainObjUnlock twice
* src/qemu/qemu_driver.c: relock driver lock if an error occurs in
qemuDomainObjBeginJobWithDriver, enter/exit monitor with driver
in qemudDomainSave
Introduce a new type="dir" mode for <disks> that allows use of
QEMU's virtual FAT block device driver. eg
<disk type='dir' device='floppy'>
<source dir='/tmp/test'/>
<target dev='fda' bus='fdc'/>
<readonly/>
</disk>
gets turned into
-drive file=fat:floppy:/tmp/test,if=floppy,index=0
Only read-only disks are supported with virtual FAT mode
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
disk args
* src/security/security_selinux.c: Temporarily skip labelling
of directory based disks
Erroneously included the sysfs_path and parent_sysfs_path elements in
the node device xml, they were not supposed to show up there
* src/conf/node_device_conf.c: remove the output of the 2 fields
I realized that I inadvertently added a member to the def struct to
contain each device's sysfs path when there was an existing member in the
dev struct for "OS specific path to device metadat, eg sysfs" Since the
udev backend needs to record the sysfs path while it's in the process of
creating the device, before the dev struct gets allocated, I chose to
remove the member from the dev struct.
* src/conf/node_device_conf.c src/conf/node_device_conf.h
src/node_device/node_device_driver.c src/node_device/node_device_hal.c
src/node_device/node_device_udev.c: remove devicePath from the
structure and use def->sysfs_path instead
If the virDomainDefPtr object has an 'id' of -1, then forcably
set the VIR_DOMAIN_XML_INACTIVE flag to ensure generated XML
does not include any cruft from the previously running guest
such as console PTY path, or VNC port.
* src/conf/domain_conf.c: Set VIR_DOMAIN_XML_INACTIVE if
def->id is -1. Replace checks for def->id == -1 with
check against flags & VIR_DOMAIN_XML_INACTIVE.
* src/conf/node_device_conf.h src/conf/node_device_conf.c: add specific
support for SCSI target in node device capabilities
* src/node_device/node_device_udev.c: add some extra detection code
when handling udev output
* configure.in: add new --with-udev, disabled by default, and requiring
libudev > 145
* src/node_device/node_device_udev.c src/node_device/node_device_udev.h:
the new node device backend
* src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c
to a better file name
* src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple
of fields in node device definitions, and an API to look them up,
remove a couple of unused fields from previous patch.
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
plug the new driver
* po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new
files and symbols
* src/util/util.h src/util/util.c: add a new convenience macro
virBuildPath and virBuildPathInternal() function
* src/conf/domain_conf.h src/conf/domain_conf.c: add the new entry in
the enum and lists of virDomainDiskBus
* src/qemu/qemu_conf.c: same for virDomainDiskQEMUBus
Change the QEMU monitor file handle watch to poll for both
read & write events, as well as EOF. All I/O to/from the
QEMU monitor FD is now done in the event callback thread.
When the QEMU driver needs to send a command, it puts the
data to be sent into a qemuMonitorMessagePtr object instance,
queues it for dispatch, and then goes to sleep on a condition
variable. The event thread sends all the data, and then waits
for the reply to arrive, putting the response / error data
back into the qemuMonitorMessagePtr and notifying the condition
variable.
There is a temporary hack in the disk passphrase callback to
avoid acquiring the domain lock. This avoids a deadlock in
the command processing, since the domain lock is still held
when running monitor commands. The next commit will remove
the locking when running commands & thus allow re-introduction
of locking the disk passphrase callback
* src/qemu/qemu_driver.c: Temporarily don't acquire lock in
disk passphrase callback. To be reverted in next commit
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Remove
raw I/O functions, and a generic qemuMonitorSend() for
invoking a command
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Remove all low level I/O, and use the new qemuMonitorSend()
API. Provide a qemuMonitorTextIOProcess() method for detecting
command/reply/prompt boundaries in the monitor data stream
Add reference counting on the virDomainObjPtr objects. With the
forthcoming asynchronous QEMU monitor, it will be neccessary to
release the lock on virDomainObjPtr while waiting for a monitor
command response. It is neccessary to ensure one thread can't
delete a virDomainObjPtr while another is waiting. By introducing
reference counting threads can make sure objects they are using
are not accidentally deleted while unlocked.
* src/conf/domain_conf.h, src/conf/domain_conf.c: Add
virDomainObjRef/Unref APIs, remove virDomainObjFree
* src/openvz/openvz_conf.c: replace call to virDomainObjFree
with virDomainObjUnref
* src/conf/network_conf.h: extend the structure to store the range
* src/conf/network_conf.c: before adding a range parse the IP addresses
do some checking and keep the size
* include/libvirt/virterror.h src/util/virterror.c: add a new error
VIR_ERR_CONFIG_UNSUPPORTED for valid but unsupported configuration options
* src/conf/domain_conf.c: Throw an error if guestfwd address isn't IPv4
and cleanup a number of parsing return error values.
allows the following to be specified in a domain:
<channel type='pipe'>
<source path='/tmp/guestfwd'/>
<target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>
* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
schemas and the parsing/serialization side for the new construct
QEmu support will add the following on the qemu command line:
-chardev pipe,id=channel0,path=/tmp/guestfwd
-net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0
* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
A character device's target (it's interface in the guest) had only a
single property: port. This patch is in preparation for adding targets
which require other properties.
Since this changes the conf type for character devices this affects
a number of drivers:
* src/conf/domain_conf.[ch] src/esx/esx_vmx.c src/qemu/qemu_conf.c
src/qemu/qemu_driver.c src/uml/uml_conf.c src/uml/uml_driver.c
src/vbox/vbox_tmpl.c src/xen/xend_internal.c src/xen/xm_internal.c:
target properties are moved into a union in virDomainChrDef, and a
targetType field is added to identify which union member should be
used. All current code which touches a virDomainChrDef is updated both
to use the new union field, and to populate targetType if necessary.
- Don't duplicate SystemError
- Use proper error code in domain_conf
- Fix a broken error call in qemu_conf
- Don't use VIR_ERR_ERROR in security driver (isn't a valid code in this case)
This patch updates the xml parsing and formatting, and the associated
virInterfaceDef data structure to support IPv6, along the way adding
support for multiple protocols per interface, and multiple IP
addresses per protocol.
* src/conf/interface_conf.[ch]: update the structures, code for parsing
and serialization
This patch adds the flag VIR_INTERFACE_XML_INACTIVE to
virInterfaceGetXMLDesc's flags. When it is*not* set (the default), the
live interface info will be returned in the XML (in particular, the IP
address(es) and netmask(s) will be retrieved by querying the interface
directly, rather than reporting what's in the config file). The
backend of this is in netcf's ncf_if_xml_state() function.
* configure.in libvirt.spec.in: requires netcf >= 0.1.3
* include/libvirt/libvirt.h.in: adds flag VIR_INTERFACE_XML_INACTIVE
* src/conf/interface_conf.c src/interface/netcf_driver.c src/libvirt.c:
update the parsing and backend routines accordingly
* tools/virsh.c: change interface edit to inactive definition and
adds the inactive flag for interface dump
The minimal XML returned from ncf_if_xml_state() doesn't contain this
attribute (which makes no sense in the case of reporting current
status of the interface), and it was preventing it from passing
through the parse/format step.
* src/conf/interface_conf.[ch]: add a new virInterfaceStartMode value
and modify loading/saving accordingly
When building with --disable-nls, I got a few messages like this:
storage/storage_backend.c: In function 'virStorageBackendCreateQemuImg':
storage/storage_backend.c:571: warning: format not a string literal and no format arguments
Fix these up.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Rename virDomainIsActive to virDomainObjIsActive, and
virInterfaceIsActive to virInterfaceObjIsActive and finally
virNetworkIsActive to virNetworkObjIsActive.
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/conf/interface_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/lxc/lxc_driver.c,
src/network/bridge_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c: Update for
renamed APIs.
Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this
* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()
The virDomainObjPtr object stores state about a running domain.
This object is shared across all drivers so it is not appropriate
to include driver specific state here. This patch adds the ability
to request a blob of private data per domain object instance. The
driver must provide a allocator & deallocator for this purpose
THis patch abuses the virCapabilitiesPtr structure for storing the
allocator/deallocator callbacks, since it is already being abused
for other internal things relating to parsing. This should be moved
out into a separate object at some point.
* src/conf/capabilities.h: Add privateDataAllocFunc and
privateDataFreeFunc fields
* src/conf/domain_conf.c: Invoke the driver allocators / deallocators
when creating/freeing virDomainObjPtr instances.
* src/conf/domain_conf.h: Pass virCapsPtr into virDomainAssignDef
to allow access to the driver specific allocator function
* src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c: Update for
change in virDomainAssignDef contract
The current virDomainObjListPtr object stores domain objects in
an array. This means that to find a particular objects requires
O(n) time, and more critically acquiring O(n) mutex locks.
The new impl replaces the array with a virHashTable, keyed off
UUID. Finding a object based on UUID is now O(1) time, and only
requires a single mutex lock. Finding by name/id is unchanged
in complexity.
In changing this, all code which iterates over the array had
to be updated to use a hash table iterator function callback.
Several of the functions which were identically duplicating
across all drivers were pulled into domain_conf.c
* src/conf/domain_conf.h, src/conf/domain_conf.c: Change
virDomainObjListPtr to use virHashTable. Add a initializer
method virDomainObjListInit, and rename virDomainObjListFree
to virDomainObjListDeinit, since its not actually freeing
the container, only its contents. Also add some convenient
methods virDomainObjListGetInactiveNames,
virDomainObjListGetActiveIDs and virDomainObjListNumOfDomains
which can be used to implement the correspondingly named
public API entry points in drivers
* src/libvirt_private.syms: Export new methods from domain_conf.h
* src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_conf.c, src/openvz/openvz_driver.c,
src/qemu/qemu_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c: Update all code
to deal with hash tables instead of arrays for domains
We need to parse a source XML block for FindPoolSources, so this is a step
in sharing the parsing. The new storage pool XML 2 XML tests cover this area
pretty well to ensure we aren't causing regressions.
This patch adds an optional attribute to the <bootp> tag, that
allows to specify a TFTP server address other than the address of
the DHCP server itself.
This can be used to forward the BOOTP settings of the host down to the
guest. This is something that configurations such as Xen's default
network achieve naturally, but must be done manually for NAT.
* docs/formatnetwork.html.in: Document new attribute.
* docs/schemas/network.rng: Add it to schema.
* src/conf/network_conf.h: Add it to struct.
* src/conf/network_conf.c: Add it to parser and pretty printer.
* src/network/bridge_driver.c: Put it in the dnsmasq command line.
* tests/networkxml2xmlin/netboot-proxy-network.xml
tests/networkxml2xmlout/netboot-proxy-network.xml
tests/networkxml2xmltest.c: add new tests
If no matching device was found (cap == NULL) then no strdup() call
was made and *wwnn and *wwpn are untouched. Checking them for NULL
in this situation may result in reporting an false-positive OOM error
because *wwnn and *wwpn may be initialized to NULL by the caller.
Only check *wwnn and *wwpn for NULL if a matching device was found
(cap != NULL) and thus strdup() was called.
* src/conf/node_device_conf.c: only report an OOM error if there
really is one
* src/conf/storage_conf.c src/conf/storage_conf.h: extend the enums
and values
* docs/schemas/storagepool.rng: add to the list of storage pool type
formats
When specifying bridge delay via network XML define, we were looking for
the 'delay' attribute, but would dump the value as 'forwardDelay'. Have
the output match the expected input (and schema).
If one has e.g.
<guest>
<os_type>hvm</os_type>
<arch name='x86_64'>
<wordsize>64</wordsize>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<machine>pc-0.11</machine>
<machine canonical='pc-0.11'>pc</machine>
<machine>pc-0.10</machine>
<machine>isapc</machine>
<domain type='qemu'>
</domain>
<domain type='kvm'>
<emulator>/usr/bin/kvm</emulator>
<machine>pc</machine>
<machine>isapc</machine>
</domain>
</arch>
</guest>
and start a guest with:
<domain type='kvm'>
...
<os>
<type arch='x86_64'>hvm</type>
...
</os>
</domain>
then the default machine type should be 'pc' and not 'pc-0.11'
Issue was reported by Anton Protopopov.
* src/capabilities.[ch]: pass the domain type to
virCapabilitiesDefaultGuestArch() and use it to look up the default
machine type from a specific guest domain if needed.
* src/conf/domain_conf.c, src/xen/xm_internal.c: update
* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases2.xml: update
the domain type to 'kvm' and remove the machine type to check
that the default gets looked up correctly
Add virNodeDeviceParseFile, and make virNodeDeviceParseNode non-static. These
will be used by the test driver.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* src/conf/domain_conf.c: a simple typo in an XML domain file could lead
to a crash, because we called STRPREFIX() on the looked up value without
checking it was non-null.
* src/conf/domain_conf.c: when declaring a <interface type="bridge">
tag, <source> needs a "bridge" attribute, but the parser complains
about a missing "dev" attribute.
* docs/schemas/domain.rng: allow one <description> tag in the top level
of the <domain> to store user information as text
* src/conf/domain_conf.c src/conf/domain_conf.h: extend the structure
to store this text, grab it at parse time and save it back when
present after <uuid>
Rename virStorageVolFormatFileSystem to virStorageFileFormat and
move to src/util/storage_file.[ch]
* src/Makefile.am: add src/util/storage_file.[ch]
* src/conf/storage_conf.[ch]: move enum from here ...
* src/util/storage_file.[ch]: .. to here
* src/libvirt_private.syms: update To/FromString exports
* src/storage/storage_backend.c, src/storage/storage_backend_fs.c,
src/vbox/vbox_tmpl.c: update for above changes
* src/conf/interface_conf.c: This was causing subsequent calls to
virXPathxxx() to fail, since ctxt->node was left pointing at the
dhcp node, rather than the protocol node.
Currently, libvirtd will start a dnsmasq process for the virtual
network, but (aside from killing the dnsmasq process and replacing it),
there's no way to define tftp boot options.
This change introduces the appropriate tags to the dhcp configuration:
<network>
<name>default</name>
<bridge name="virbr%d" />
<forward/>
<ip address="192.168.122.1" netmask="255.255.255.0">
<tftp root="/var/lib/tftproot" />
<dhcp>
<range start="192.168.122.2" end="192.168.122.254" />
<bootp file="pxeboot.img"/>
</dhcp>
</ip>
</network>
When the attributes are present, these are passed to the
arguments to dnsmasq:
dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^
from <tftp /> from <bootp />
At present, only local tftp servers are supported (ie, dnsmasq runs as
the tftp server), but we could improve this in future by adding a
server= attribute.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2009-09-21 Paolo Bonzini <pbonzini@redhat.com>
Jeremy Kerr <jk@ozlabs.org>
* docs/formatnetwork.html.in: Document new tags.
* docs/formatnetwork.html: Regenerate.
* docs/schemas/network.rng: Update.
* src/network_conf.c (virNetworkDefFree): Free new fields.
(virNetworkDHCPRangeDefParseXML): Parse <bootp>.
(virNetworkIPParseXML): New, parsing <dhcp> and <tftp>.
(virNetworkDefParseXML): Use virNetworkIPParseXML instead of
virNetworkDHCPRangeDefParseXML.
(virNetworkDefFormat): Pretty print new fields.
* src/network_conf.h (struct _virNetworkDef): Add netboot fields.
* src/network_driver.c (networkBuildDnsmasqArgv): Add
TFTP and BOOTP arguments.
* tests/Makefile.am (EXTRA_DIST): Add networkschemadata.
* tests/networkschematest: Look in networkschemadata.
* tests/networkschemadata/netboot-network.xml: New.
* src/conf/domain_conf.c: Don't assume all virDomainObjPtr have
a non-NULL monitor_chr field in virDomainObjFormat.
* src/lxc/lxc_driver.c: Implement suspend/resume driver APis
* src/util/cgroup.c, src/util/cgroup.h: Support the 'freezer'
cgroup controller
* src/libvirt_private.syms: Export virCgroupSetFreezerState
and virCgroupGetFreezerState
* src/capabilities.c, src/capabilities.h, src/domain_conf.c,
src/domain_conf.h, src/domain_event.c, src/domain_event.h,
src/interface_conf.c, src/interface_conf.h,
src/network_conf.c, src/network_conf.h, src/node_device_conf.c,
src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h,
src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c,
src/storage_encryption_conf.h: Move to src/conf/
* src/Makefile.am: Add -Isrc/conf to the individual build targets
which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS
and SELINUX_CFLAGS from global INCLUDES and only have them in build
targets which actually need them. Create a libvirt_conf.la
convenience library for all config parsers
* src/hostusb.h: Remove bogus include of domain_conf.h
* tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src
since it never has any generated header files
* daemon/Makefile.am: Add -Isrc/conf
* proxy/Makefile.am: Add -Isrc/conf and cope with renamed files
* src/hash.c: Remove bogus include of libxml/threads.h
