This event is emitted on the monitor when a GID table in pvrdma device
is modified and the change needs to be propagate to the backend RDMA
device's GID table.
The control over the RDMA device's GID table is done by updating the
device's Ethernet function addresses.
Usually the first GID entry is determine by the MAC address, the second
by the first IPv6 address and the third by the IPv4 address. Other
entries can be added by adding more IP addresses. The opposite is the
same, i.e. whenever an address is removed, the corresponding GID entry
is removed.
The process is done by the network and RDMA stacks. Whenever an address
is added the ib_core driver is notified and calls the device driver's
add_gid function which in turn update the device.
To support this in pvrdma device we need to hook into the create_bind
and destroy_bind HW commands triggered by pvrdma driver in guest.
Whenever a changed is made to the pvrdma device's GID table a special
QMP messages is sent to be processed by libvirt to update the address of
the backend Ethernet device.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These were not caught by our current regular expressions
but will be caught by the improved ones we're about to
introduce, so fix them ahead of time.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every time we call all domain stats for inactive domain with
unavailable storage source we get error message in logs [1]. It's a bit noisy.
While it's arguable whether we need such message or not for mandatory
disks we would like not to see messages for optional disks. Let's
filter at least for cases of local files. Fixing other cases would
require passing flag down the stack to .backendInit of storage
which is ugly.
Stats for active domain are fine because we either drop disks
with unavailable sources or clean source which is handled
by virStorageSourceIsEmpty in qemuDomainGetStatsOneBlockFallback.
We have these logs for successful stats since 25aa7035d (version 1.2.15)
which in turn fixes 596a13713 (version 1.2.12 )which added substantial
stats for offline disks.
[1] error message example:
qemuOpenFileAs:3324 : Failed to open file '/path/to/optional/disk': No such file or directory
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
QEMU can report how many times during post-copy migration the domain
running on the destination host tried to access a page which has not
been migrated yet.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1624223
There are two ways to request memory preallocation on cmd line:
-mem-prealloc and .prealloc attribute for a memory-backend-file.
However, as it turns out it's not safe to use both at the same
time. If -mem-prealloc is used then qemu will fully allocate the
memory (this is done by actually touching every page that has
been allocated). Then, if .prealloc=yes is specified,
mbind(flags = MPOL_MF_STRICT | MPOL_MF_MOVE) is called which:
a) has to (possibly) move the memory to a different NUMA node,
b) can have no effect when hugepages are in play (thus ignoring user
request to place memory on desired NUMA nodes).
Prefer -mem-prealloc as it is more backward compatible
compared to switching to "-numa node,memdev= + -object
memory-backend-file".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since the code was never run, it would have been very hard to spot this
mistake, especially since the compiler can't really warn about it.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We are preparing a certain disk source passed in as '@src' so the
individual functions should use that rather than disk->src which
corresponds to the top level element of the chain only.
Without this change TLS and persistent reservations would not work for
backing images of a chain when using -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function clears and frees the passed buffers on success, but not in
one case of failure. Modify the control flow that the args are always
consumed, record it in the docs and remove few pointless cleanup paths
in callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Just like for SPICE, we need to put the DRI device into the namespace,
otherwise it will be left out from the DAC relabeling process.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for armv6l qemu guests has been added.
Tested with arm1176 CPU on x86.
Signed-off-by: Stefan Schallenberg <infos@nafets.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Both VIR_DOMAIN_FEATURE_HPT and VIR_DOMAIN_FEATURE_HTM are
handled in the exact same way, so we can remove some duplicated
code without losing any functionality.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For metadata locking we might need an extra fork() which given
latest attempts to do fewer fork()-s is suboptimal. Therefore,
there will be a qemu.conf knob to {en|dis}able this feature. But
since the feature is actually not metadata locking itself rather
than remembering of the original owner of the file this is named
as 'rememberOwner'. But patches for that feature are not even
posted yet so there is actually no qemu.conf entry in this patch
nor a way to enable this feature.
Even though this is effectively a dead code for now it is still
desired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a new memoryBacking source type "memfd", supported by QEMU (when
the capability is available).
A memfd is a specialized anonymous memory kind. As such, an anonymous
source type could be automatically using a memfd. However, there are
some complications when migrating from different memory backends in
qemu (mainly due to the internal object naming at this point, but
there could be more). For now, it is simpler and safer to simply
introduce a new source type "memfd". Eventually, the "anonymous" type
could learn to use memfd transparently in a separate change.
The main benefits are that it doesn't need to create filesystem files,
and it also enforces sealing, providing a bit more safety.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Previous patch removed the call to qemuProcessValidateCpuCount
from qemuProcessStartValidateXML, in qemu_process.c. The only
caller left is qemuDomainDefValidate, in qemu_domain.c.
Instead of having a public function declared inside qemu_process.c
that isn't used in that file, this patch moves the function to
qemu_domain.c, making in static and renaming it to
qemuDomainValidateCpuCount to be compliant with other static
functions names in the file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Adding maxCpu validation in qemuDomainDefValidate allows the user to
spot over the board maxCpus counts at editing time, instead of
facing a runtime error when starting the domain. This check is also
arch independent.
This leaves us with 2 calls to qemuProcessValidateCpuCount: one in
qemuProcessStartValidateXML and the new one at qemuDomainDefValidate.
The call in qemuProcessStartValidateXML is redundant. Following
up in that code, there is a call to virDomainDefValidate, which
in turn will call config.domainValidateCallback. In this case, the
callback function is qemuDomainDefValidate. This means that, on startup
time, qemuProcessValidateCpuCount will be called twice.
To avoid that, let's also remove the qemuProcessValidateCpuCount call
from qemuProcessStartValidateXML.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We should ensure that QEMU supports zPCI when a zPCI address is defined
in XML and otherwise report an error. This patch introduces a generic
validation function qemuDomainDeviceDefValidateAddress() which calls
qemuDomainDeviceDefValidateZPCIAddress() if address type is PCI address.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The pci-root depends on zpci capability. So autogenerate pci-root if
zpci exists.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The function qemuDomainGetHostdevPath() is using VIR_FREE to free the
paths stored in tmpPaths. Both syntax analyzer are reporting a warning
about this. Replacing the old method to function
virStringListFreeCount() fixes the warnings/errors.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
VFIO AP has a limitation on a single device per domain, however, when
commit 11708641 added the support for vfio-ap, check for this limitation
was performed as part of the post parse code. Generally, checks like that
should be performed within the driver's validation callback to eliminate
any slight chance of failing in post parse, which could potentially
result in the domain XML config vanishing.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Since we'll need to validate other models apart from VFIO PCI too,
having a helper for each model should keep the code base cleaner.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
If qemuDomainSnapshotDiscard() fails for any reason (rare,
but possible with an ill-timed ENOMEM or if
qemuDomainSnapshotForEachQcow2() has problems talking to the
qemu guest monitor), then an attempt to retry the snapshot
deletion API will crash because we didn't undo the effects
of virDomainSnapshotDropParent() temporarily rearranging the
internal list structures, and the second attempt to drop
parents will dereference NULL. Fix it by instead noting that
there are only two callers to qemuDomainSnapshotDiscard(),
and only one of the two callers wants the parent to be updated;
thus we can move the call to virDomainSnapshotDropParent()
into a code path that only gets executed on success.
Signed-off-by: Eric Blake <eblake@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
When qemuProcessReconnectHelper was introduced (commit d38897a5d)
reconnection failure used VIR_DOMAIN_SHUTOFF_FAILED; however, that
was changed in commit bda2f17d to either VIR_DOMAIN_SHUTOFF_CRASHED
or VIR_DOMAIN_SHUTOFF_UNKNOWN.
When QEMU_CAPS_NO_SHUTDOWN checking was removed in commit fe35b1ad6
the conditional state was just left at VIR_DOMAIN_SHUTOFF_CRASHED.
So introduce qemuDomainIsUsingNoShutdown which will manage the
condition when the domain was started with -no-shutdown so that
when/if reconnection failure occurs we can restore the decision
point used to determine whether CRASHED or UNKNOWN is provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
virXMLFormatElement() frees attrBuf on success, but not necessarily
on failure. Most other callers of this function take the time to
reset attrBuf afterwords, but qemuDomainObjPrivateXMLFormatBlockjobs()
was relying on it succeeding, and could thus result in a memory leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
This function updates the used QEMU capabilities of @vm by querying
the QEMU capabilities cache.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Thanks to the previous commit the RESUME event handler knows what reason
should be used when changing the domain state to VIR_DOMAIN_RUNNING, but
the emitted VIR_DOMAIN_EVENT_RESUMED event still uses a generic
VIR_DOMAIN_EVENT_RESUMED_UNPAUSED detail. Luckily, the event detail can
be easily deduced from the running reason, which saves us from having to
pass one more value to the handler.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Create a qemuDomainRemoveInactiveJobLocked which copies
qemuDomainRemoveInactiveJob except of course calling
another new helper qemuDomainRemoveInactiveLocked.
The qemuDomainRemoveInactiveLocked is a copy of
qemuDomainRemoveInactive except that instead of calling
virDomainObjListRemove it calls virDomainObjListRemoveLocked.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce qemuDomainRemoveInactiveJobCommon to handle what will
be the common parts of the code with a new function that will
be used to call virDomainObjListRemoveLocked instead of the
unlocked variant.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Even though the current use of the function does not require full
implementation with transactions (none of the callers pass a path
somewhere under /dev), it doesn't hurt either. Moreover, in
future patches the paradigm is going to shift so that any API
that touches a file is required to use transactions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 82327038 moved a couple of checks out of the XML parser
into the domain validation; however, those checks seem to be more
useful as hypervisor specific checks rather than the more general
domain conf checks (nothing in the docs indicate a specific error).
Fortunately only QEMU was processing the memoryBacking, thus
add the changes to qemuDomainDefValidateMemory and change the
code a bit to make usage of the similar deref to def->mem and
the mem->nhugepages filter.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
In some cases we are checking if the mount namespace is enabled
at two places: one is at the beginning of exported function (e.g.
qemuDomainNamespaceSetupDisk()) and the other is at the beginning
of qemuDomainNamespaceMknodPaths() which is called from the
former function anyway. Then we have some other functions which
rely on the later check solely.
In order to compensate for possibly needless function call,
qemuDomainNamespaceMknodPaths() returns early if @npaths is zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There is no need to check if @npaths is not zero. Let's
qemuDomainNamespaceUnlinkPaths() handle that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The appropriate time to ensure the required capabilities are
present is validate rather than command line generation: add
a new qemuDomainDeviceDefValidateInput() function and move
all existing checks there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
S390 is aware of both vfio-pci and vfio-ccw devices, so
on S390 the capability QEMU_CAPS_VFIO_PCI_DISPLAY will be
available. Add an extra check to make sure we only set the
display to off for vfio-pci mediated devices. Otherwise we
add display for vfio-ccw device and this breaks vfio-ccw
device qemu command line.
Fixes: d54e45b6e conf: Introduce new <hostdev> attribute 'display'
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 6534b3c4 tried to raise an error when there is no numa
nodes by setting access='shared' in the domain config, but added
a helper called from qemuDomainDeviceDefValidate instead of a
helper called from qemuDomainDefValidate for XML:
<memoryBacking>
<hugepages/>
<access mode='shared'/>
</memoryBacking>
Since there are no memory devices in the test XML, there would
be no validation failure, but the test added was still failing.
Investigating that it turns out that unnecessary XML elements
were causing the failure (no need for <video>, <graphics>,
<pm>, usb controller model "piix3-uhci", disk attribute for
"discard='unmap'", <serial>, <console>, <channel> and a
memballoon model). Removing all those before moving the method
caused the test to succeed.
So this patch moves the validation to the right place and
removes all the unnecessary XML pieces that were causing
a false validation failure.
https://bugzilla.redhat.com/show_bug.cgi?id=1448149#c14
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We would have used virtio for networking anyway, but it's
better to be explicit; for graphics, none of the existing
models work right now but virtio is the only one which
has a non-PCI variant, so it's as good a default as any
Spotted-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the existing models is suitable for use with
RISC-V virt guests, and we don't want information about
the serial console to be missing from the XML.
The name is based on comments in qemu/hw/riscv/virt.c:
RISC-V machine with 16550a UART and VirtIO MMIO
and in qemu/hw/char/serial.c:
QEMU 16550A UART emulation
along with the output of dmesg in the guest:
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13,
base_baud= 230400) is a 16550A
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass in the node name as the backend alias when -blockdev is used. As
copy-on-read is expressed by a separate -blockdev backing chain member
we need to decide which node name to use here.
For empty cdroms when using -blockdev there is no backend at all so NULL
is returned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prepare the full backing chain by instantiating authentication and TLS
transport secrets and other necessary objects so that we can add the
full backing chain explicitly to qemu. This also includes allocation of
nodenames for the individual backing chain members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The copy-on-read feature is expressed by adding a new node layer in
qemu when using -blockdev. Since we will keep these per-disk (as opposed
to per storage source) we need to store the appropriate node names in
the disk definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using -blockdev you need to use the qom path to refer to the disk
fronends. Add means for storing the path and getting it after restart.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
