'passthrough' is Xen-Specific guest configuration option new to Xen 4.13
that enables IOMMU mappings for a guest and hence whether it supports PCI
passthrough. The default is disabled. See the xl.cfg(5) man page and
xen.git commit babde47a3fe for more details.
The default state of disabled prevents hotlugging PCI devices. However,
if the guest configuration contains a PCI passthrough device at time of
creation, libxl will automatically enable 'passthrough' and subsequent
hotplugging of PCI devices will also be possible. It is not possible to
unconditionally enable 'passthrough' since it would introduce a migration
incompatibility due to guest ABI change. Instead, introduce another Xen
hypervisor feature that can be used to enable guest PCI passthrough
<features>
<xen>
<passthrough state='on'/>
</xen>
</features>
To allow finer control over how IOMMU maps to guest P2M table, the
passthrough element also supports a 'mode' attribute with values
restricted to snyc_pt and share_pt, similar to xl.cfg(5) 'passthrough'
setting .
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
e820_host is a Xen-specific option, only available for PV domains, that
provides the domain a virtual e820 memory map based on the host one. It
is enabled with a new Xen hypervisor feature, e.g.
<features>
<xen>
<e820_host state='on'/>
</xen>
</features>
e820_host is required when using PCI passthrough and is generally
considered safe for any PV kernel. e820_host is silently ignored if set
in HVM domain configuration. See xl.cfg(5) man page in the Xen
documentation for more details.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The udev monitor thread "udevEventHandleThread()" will lag the
actual/real view of devices in sysfs as it serially processes udev
monitor events. So for instance if you were to run the following cmd
to create a new veth pair and rename one of the veth endpoints
you might see the following monitor events and real world that looks like
time
| create v0 sysfs entry
wake udevEventHandleThread | create v1 sysfs entry
udev_monitor_receive_device(v1-add) | move v0 sysfs to v2
udevHandleOneDevice(v1) |
udev_monitor_receive_device(v0-add) |
udevHandleOneDevice(v0) | <--- error msgs in virNetDevGetLinkInfo()
udev_monitor_receive_device(v2-move) | as v0 no longer exists
udevHandleOneDevice(v2) |
\/
As you can see the changes in sysfs can take place well before we get
to act on the events in the udevEventHandleThread(), so by the time we
get around to processing the v0 add event, the sysfs entry has been
moved to v2.
To work around this we check if the sysfs entry is valid before
attempting to read it and don't bother trying to read link info if
not. This is safe since we will never read sysfs entries earlier than
it existing, ie. if the entry is not there it has either been removed
in the time since we enumerated the device or something bigger is
busted, in either case, no sysfs entry, no link info. In the case
described above we will eventually get the link info as we work
through the queue of monitor events and get to the 'move' event.
https://bugzilla.redhat.com/show_bug.cgi?id=1557902
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is possible and common to rename some devices, this is especially
true for ethernet devices such as veth pairs.
In the udevEventHandleThread() we will be notified of this change but
currently we only process "add", "change" and "remove"
events. Renaming a device such as above results in a "move" event, not
a "remove" followed by and "add" or vise versa. This change will add
the new/destination device to our records but unfortunately there is
no usable mechanism to identify the old/source device to remove it
from the records. So this is admittedly only a partial fix.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Changes in the API:
- APIs related to the graphics adapter are no longer on the
IMachine interface, but on a IGraphicsAdapter interface
- The LaunchVMProcess method takes a list of env variables
instead of a single variable containing a concatenated
list. Since we only ever pass a single env variable, we
can simply stuff it straight into a list.
- The DHCP server start method no longer needs the network
name
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Changes in the API:
- The CreatedSharedFolder method now accepts a target mount
point. Since we don't request automount, we're just passing
NULL. We could, however, use this to pass the desired
mount target from the XML config in future.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Long ago we switched the vbox driver to run inside libvirtd to avoid
libvirt.so being polluted with GPLv2-only code. Since libvirtd is not
built on Windows, we disabled vbox on Windows builds. Thus the MSCOM
glue code is not required.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While I'm at it, use more g_autofree and g_autoptr() in this
file. This also fixes a possible mem-leak in
virNetDevGetVirtualFunctions().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I've just got a new machine and I'm still converging on the
kernel config. Anyway, since I don't have enabled any of SRIO-V
drivers, my kernel doesn't have NET_DEVLINK enabled (i.e.
virNetDevGetFamilyId() returns 0). But this makes nodedev driver
ignore all interfaces, because when enumerating all devices via
udev, the control reaches virNetDevSwitchdevFeature() eventually
and subsequently virNetDevGetFamilyId() which 'fails'. Well, it's
not really a failure - the virNetDevSwitchdevFeature() stub
simply returns 0.
Also, move the call a few lines below, just around the place
where it's needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in v3.8.0-rc1~96, the virNetDevGetFamilyId() gets
netlink family ID for passed family name (even though it's used
only for getting "devlink" ID). Nevertheless, the function
returns 0 on an error or if no family ID was found. This makes it
harder for a caller to distinguish these two. Change the retval
so that a negative value is returned upon error, zero is no ID
found (but no error encountered) and a positive value is returned
on successful translation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As explained in the previous commit, we need to relabel the file
we are restoring the domain from. That is the FD that is passed
to QEMU. If the file is not under /dev then the file inside the
namespace is the very same as the one in the host. And regardless
of using transactions, the file will be relabeled. But, if the
file is under /dev then when using transactions only the copy
inside the namespace is relabeled and the one in the host is not.
But QEMU is reading from the one in the host, actually.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1772838
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This API allows drivers to separate out handling of @stdin_path
of virSecurityManagerSetAllLabel(). The thing is, the QEMU driver
uses transactions for virSecurityManagerSetAllLabel() which
relabels devices from inside of domain's namespace. This is what
we usually want. Except when resuming domain from a file. The
file is opened before any namespace is set up and the FD is
passed to QEMU to read the migration stream from. Because of
this, the file lives outside of the namespace and if it so
happens that the file is a block device (i.e. it lives under
/dev) its copy will be created in the namespace. But the FD that
is passed to QEMU points to the original living in the host and
not in the namespace. So relabeling the file inside the namespace
helps nothing.
But if we have a separate API for relabeling the restore file
then the QEMU driver can continue calling
virSecurityManagerSetAllLabel() with transactions enabled and
call this new API without transactions.
We already have an API for relabeling a single file
(virSecurityManagerDomainSetPathLabel()) but in case of SELinux
it uses @imagelabel (which allows RW access) and we want to use
@content_context (which allows RO access).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This commit partially reverts
commit c360ea28dc
Refs: v6.2.0-rc1-1-gc360ea28dc
Author: Rafael Fonseca <r4f4rfs@gmail.com>
AuthorDate: Fri Mar 27 18:40:47 2020 +0100
Commit: Michal Prívozník <mprivozn@redhat.com>
CommitDate: Mon Mar 30 09:48:22 2020 +0200
util: virdaemon: fix compilation on mingw
The daemons are not supported on Win32 and therefore were not compiled
in that platform. However, with the daemon code sharing, all the code in
utils *is* compiled and it failed because `waitpid`, `fork`, and
`setsid` are not available. So, as before, let's not build them on
Win32 and make the code more portable by using existing vir* wrappers.
Not compiling virDaemonForkIntoBackground on Win32 is good, but the
second part of the original patch incorrectly replaced waitpid and fork
with our virProcessWait and virFork APIs. These APIs are more than just
simple wrappers and we don't want any of the extra functionality.
Especially virFork would reset any setup made before
virDaemonForkIntoBackground is called, such as logging, signal handling,
etc.
As a result of the change the additional fix in v6.2.0-67-ga87e4788d2
(util: virdaemon: fix waiting for child processes) is no longer
needed and it is effectively reverted by this commit.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fixes build error introduced in
commit aa15e9259f
Author: Laine Stump <laine@redhat.com>
Date: Sun Apr 5 22:40:37 2020 -0400
qemu/conf: set HOTPLUGGABLE connect flag during PCI address set init
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Trivial comment fix, reflecting the changes in
4ee2b31804.
Signed-off-by: Leonid Bloch <lb.workbox@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Previously, we used virCapabilitiesDomainDataLookup() to fill
machine type in post parse callback if none was provided in the
domain XML. If machine type couldn't be filled in an error was
reported. After 4a4132b462 we've changed it to
virQEMUCapsGetPreferredMachine() which returns NULL, but we no
longer report an error and proceed with the post parse callbacks
processing. This may lead to a crash because the code later on
assumes def->os.machine is not NULL.
Fixes: 4a4132b462
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
When preparing to do a blockcopy, the mirror image is modified so
that QEMU can access it. For instance, the mirror has seclabels
set, if it is a NVMe disk it is detached from the host and so on.
And usually, the restore is done upon successful finish of the
blockcopy operation. But, if something fails then we need to
explicitly revoke the access to the mirror image (and thus
reattach NVMe disk back to the host).
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1822538
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
When we do parallel migration, The multifd-channels migration parameter
needs to be set on the destination side as well before incoming migration
URI, unless we accept the default number of connections(2).
Usually, This can be correctly handled by libvirtd. But in this case if
we use p2p + xbzrle compression without parameter '--comp-xbzrle-cache',
qemuMigrationParamsDump returns too early, The corresponding migration
parameter will not be set on the destination side, It results QEMU hangs.
Reproducer:
virsh migrate --live --p2p --comp-methods xbzrle \
--parallel --parallel-connections 3 GUEST qemu+ssh://dsthost/system
or
virsh migrate --live --p2p --compressed \
--parallel --parallel-connections 3 GUEST qemu+ssh://dsthost/system
Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <20200416044451.21134-1-lma@suse.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
With libpmem support compiled into qemu it will trigger the following
denials on every startup.
apparmor="DENIED" operation="open" name="/"
apparmor="DENIED" operation="open" name="/sys/bus/nd/devices/"
This is due to [1] that tries to auto-detect if the platform supports
auto flush for all region.
Once we know all the paths that are potentially needed if this feature
is really used we can add them conditionally in virt-aa-helper and labelling
calls in case </pmem> is enabled.
But until then the change here silences the denial warnings seen above.
[1]: https://github.com/pmem/pmdk/blob/master/src/libpmem2/auto_flush_linux.c#L131
Bug: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1871354
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Starting with 3b076391be
(v6.1.0-122-g3b076391be) we support http cookies. Since they may contain
somewhat sensitive information we should not format them into the XML
unless VIR_DOMAIN_DEF_FORMAT_SECURE is asserted.
Reported-by: Han Han <hhan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We always tried to install backing store for the image even if it didn't
make sense, e.g. for a full backup into a raw image. Additionally we
didn't record the backing file into the qcow2 metadata so the image
itself contained the diff of data but reading from it would be
incomplete as it depends on the backing image.
This patch fixes both issues by carefully installing the correct backing
file when appropriate and also recording it into the metadata when
creating the image.
https://bugzilla.redhat.com/show_bug.cgi?id=1813310
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is the last missing g_autofree conversion change in the module after
commit 1e2ae2e311 took care of the VIR_AUTOFREE conversion.
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Before this patch we would simply rely on QEMU failing to attach the
device. Since we have a flag in the address set telling us which
controllers support hotplug, we can fail the operation sooner.
This also assures that when hotplugging with no provided PCI address,
that we skip any controllers with hotplug='off', and attempt to assign
the device to a controller that not only supports hotplug, but also
has it enabled.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The HOTPLUGGABLE flag is set for appropriates buses in a PCI address
set, and thnis patch updates virDomainPCIAddressFlagsCompatible() to
check the HOTPLUGGABLE flag when searching for a suitable bus/slot for
a device. No devices request HOTPLUGGABLE though (yet), so there is no
observable effect.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainPCIAddressBusSetModel() is called for each PCI controller
when building an address set prior to assiging PCI addresses to
devices.
This patch adds a new argument, allowHotplug, to that function that
can be set to false if we know for certain that a particular
controller won't support hotplug
The most interesting case is in qemuDomainPCIAddressSetCreate(), where
the config of each existing controller is available while building the
address set, so we can appropriately set allowHotplug = false when the
user has "hotplug='off'" in the config of a controller that normally
would support hotplug. In all other cases, it is set to true or false
in accordance with the capability of the controller model.
So far we aren't doing anything with this bus flag in the address set.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Old behavior: If the address was manually provided by config, copy
device AUTOASSIGN flag into the bus flag, and then later on in the
function *always* check for a match of the flags (which will always
match if the address came from config, since we just copied it).
New behavior: Don't mess with the bus flags - just directly check if
the AUTOASSIGN flag matches in bus and dev, but only make the check if
the address didn't come from config (i.e. it was auto-assigned by
libvirt).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the HOTPLUGGABLE flag was originally added, it was set for all
the PCI controllers that accepted hotplugged devices, and requested
for all devices that were auto-assigned to a controller. While we're
still autoassigning to the same list of controllers, those controllers
may or may not support hotplug, so let's use the flag that fits what
we're actually doing.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new flag will be set for any controller that we decide can have
devices assigned to it automatically during PCI device assignment. In
the past PCI_CONNECT_TYPE_HOTPLUGGABLE was used for this purpose, but
that is overloading that flag, and no longer technically correct; what
we *really* want is to auto-assign devices to any pcie-root-port or
pcie-switch-downstream-port regardless of whether or not that
controller happens to have hotplug enabled.
This patch just adds the flag, but doesn't use it at all. Note that
the numbering of all the other flags was changed in order to insert
the new flag near the beginning of the list; that doesn't cause any
problem because the connect flags aren't stored anywhere between runs
of libvirtd.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a pcie-root-port or pcie-downstream-port has hotplug='off' in its
<target> subelement, and if the qemu binary supports the hotplug=false
option, then it will be added to the commandline for the pcie
controller. This controller will then not allow any hotplug/unplug of
devices while the guest is running (and the hotplug capability won't
be advertised to the guest OS, so the guest OS also won't present
unplugging of PCI devices as an option).
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
For any PCI controllers other than pcie-downstream-port and
pcie-root-port, of for qemu binaries that don't support the hotplug
commandline option, an error will be logged during validation.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
a <controller type='pci'...> element can now have a "hotplug"
attribute in the <target> subelement. This is intended to control
whether or not the slot(s) of the controller support
hotplugging/unplugging a device:
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
The default value of hotplug is "on".
Since support for configuring such an option is hypervisor-dependent
(and will vary among different types of PCI controllers even on a
single hypervisor), no validation is done in this patch - that
validation will be done in the patch that wires support for the
setting into the hypervisor.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This caps flag is set when the qemu binary supports the option
"hotplug" for pcie-root-port, ioh3420 (Intel pcie-root-port) and
xio3130-downstream (Intel pcie-downstream-port). If it's available,
it's possible to disable hotplugging/unplugging devices on a
particular port by adding ",hotplug=off" to the qemu device
commandline. This option first appears in qemu-5.0.0.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support in the domXML<->native config converter for max_event_channels.
The parser and formater functions for max_grant_frames were reworked to
also parse max_event_channels. In doing so the xenbus controller is added
earlier in the config parsing, requiring a small adjustment to one of the
existing tests. Include a new test for the event channel conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for setting event_channels in libxl domain config object and
include a test to check that it is properly converted from XML to libxl
domain config.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Event channels are like PV interrupts and in conjuction with grant frames
form a data transfer mechanism for PV drivers. They are also used for
inter-processor interrupts. Guests with a large number of vcpus and/or
many PV devices many need to increase the maximum default value of 1023.
For this reason the native Xen config format supports the
'max_event_channels' setting. See xl.cfg(5) man page for more details.
Similar to the existing maxGrantFrames option, add a new xenbus controller
option 'maxEventChannels', allowing to adjust the maximum value via libvirt.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The signatures of these two CPU model differ only in stepping as both
report family 6 and model 85. Skylake-Server uses stepping 4 or less and
Cascadelake-Server uses stepping 5..7.
https://bugzilla.redhat.com/show_bug.cgi?id=1761678
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
CPU models defined in the cpu_map can use signature/@stepping attribute
to match a limited set of stepping numbers. The value is a bitmap for
bits 0..15 each corresponding to a single stepping value. For example,
stepping='4-6,9' will match 4, 5, 6, and 9. Omitting the attribute is
equivalent to stepping='0-15'.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Thanks to glib allocation functions which abort on OOM the function
cannot ever return NULL.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The CPU models in our cpu_map define their signatures using separate
family and model numbers. Let's store the signatures in the same way in
our runtime representation of the cpu_map.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It can be used for separating family, model, and stepping numbers from a
single 32b integer as reported by CPUID.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function will be used for freeing virCPUx86Signatures structure
introduced later in this series.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Later in this series the function will work on a newly introduced
virCPUx86Signatures structure. Let's move it to the place where all
related functions will be added and rename the function as
virCPUx86SignaturesFormat for easier review of the virCPUx86Signatures
patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Later in this series the function will work on a newly introduced
virCPUx86Signatures structure. Let's move it to the place were all
related functions will be added and rename the function as
virCPUx86SignaturesMatch for easier review of the virCPUx86Signatures
patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Later in this series the function will work on a newly introduced
virCPUx86Signatures structure. Let's move it to the place were all
related functions will be added and rename the function as
virCPUx86SignaturesCopy for easier review of the virCPUx86Signatures
patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The hint was introduced a long time ago when broken TSX implementation
was found in Haswell and Broadwell CPUs. Since then many more CPUs with
TSX were introduced and and disabled due to TAA vulnerability.
Thus the hint is not very useful and I think removing it is a better
choice then updating it to cover all current noTSX models.
This partially reverts:
commit 7f127ded65
cpu: Rework cpuCompare* APIs
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass the packed option on the QEMU command line of the capability for
packed virtqueues is detected and the parameter is set explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose the virtio parameter for packed virtqueues as an optional libvirt
XML attribute to virtio-backed devices, e.g.:
<interface type='user'>
<mac address='00:11:22:33:44:55'/>
<model type='virtio'/>
<driver packed='on'/>
</interface>
If the attribute is omitted, the default value for this attribute is 'off' and
regular split virtqueues are used.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add the capability for QEMU's packed virtqueues for virtio that supposedly have
better cache utilization and performance compared to the default split queues.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Unlike `waitpid`, `virProcessWait` only returns -1 (error) or 0
(success), so comparing that to `pid` will always be false and the
parent will report failure with:
error : main:851 : Failed to fork as daemon: No such file or directory
even though the grandchild process is succesfully running. Note that the
errno message is misleading: it was last set when trying to find a
restart state file.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reported-by: Marcin Krol <hawk@tld-linux.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Replace vm->def->disks[i] with dom_disk variable which is
initialized to the same disk.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So far, libvirt generates the following path for automatic dumps:
$autoDumpPath/$id-$shortName-$timestamp
where $autoDumpPath is where libvirt stores dumps of guests (e.g.
/var/lib/libvirt/qemu/dump), $id is domain ID and $shortName is
shortened version of domain name. So for instance, the generated
path may look something like this:
/var/lib/libvirt/qemu/dump/1-QEMUGuest-2020-03-25-10:40:50
While in case of embed driver the following path would be
generated by default:
$root/lib/libvirt/qemu/dump/1-QEMUGuest-2020-03-25-10:40:50
which is not clashing with other embed drivers, we allow users to
override the default and have all embed drivers use the same
prefix. This can create clashing paths. Fortunately, we can reuse
the approach for machined name generation
(v6.1.0-178-gc9bd08ee35) and include part of hash of the root in
the generated path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far, libvirt generates the following path for memory:
$memoryBackingDir/$id-$shortName/ram-nodeN
where $memoryBackingDir is the path where QEMU mmaps() memory for
the guest (e.g. /var/lib/libvirt/qemu/ram), $id is domain ID
and $shortName is shortened version of domain name. So for
instance, the generated path may look something like this:
/var/lib/libvirt/qemu/ram/1-QEMUGuest/ram-node0
While in case of embed driver the following path would be
generated by default:
$root/lib/qemu/ram/1-QEMUGuest/ram-node0
which is not clashing with other embed drivers, we allow users to
override the default and have all embed drivers use the same
prefix. This can create clashing paths. Fortunately, we can reuse
the approach for machined name generation
(v6.1.0-178-gc9bd08ee35) and include part of hash of the root in
the generated path.
Note, the important change is in qemuGetMemoryBackingBasePath().
The rest is needed to pass driver around.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far, libvirt generates the following path for hugepages:
$mnt/libvirt/qemu/$id-$shortName
where $mnt is the mount point of hugetlbfs corresponding to
hugepages of desired size (e.g. /dev/hugepages), $id is domain ID
and $shortName is shortened version of domain name. So for
instance, the generated path may look something like this:
/dev/hugepages/libvirt/qemu/1-QEMUGuest
But this won't work with embed driver really, because if there
are two instances of embed driver, and they both want to start a
domain with the same name and with hugepages, both drivers will
generate the same path which is not desired. Fortunately, we can
reuse the approach for machined name generation
(v6.1.0-178-gc9bd08ee35) and include part of hash of the root in
the generated path.
Note, the important change is in qemuGetBaseHugepagePath(). The
rest is needed to pass driver around.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 06a19921b6.
What I haven't realized when writing this ^^ commit is that the
virQEMUDriver structure already stores the root directory path.
And since the pointer is immutable it can be accessed right from
the structure and thus there is no need to duplicate it in the
driver config.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The cfg->root is going away, therefore get the info right from
the driver structure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The code that generates "qemu-embed-$hash" is going to be useful
in more places. Separate it out into a function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainGenerateMachineName() function doesn't belong in
src/conf/ really, because it has nothing to do with domain XML
parsing. It landed there because of lack of better place in the
past. But now that we have src/hypervisor/ the function should
live there. At the same time, the function name is changed to
match new location.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Initially introduced in v3.10.0-rc1~172.
When generating a path for memory-backend-file or -mem-path, qemu
driver will use the following pattern:
$memoryBackingDir/libvirt/qemu/$id-$shortName
where $memoryBackingDir defaults to /var/lib/libvirt/qemu/ram but
can be overridden in qemu.conf. Anyway, the "/libvirt/qemu/" part
looks redundant, because it's already contained in the default,
or creates unnecessary nesting if overridden in qemu.conf.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced in v1.2.17-rc1~121, the assumption was that the
driver->privileged is immutable at the time but it might change
in the future. Well, it did not ever since. It is still immutable
variable. Drop the needless accessor then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 54a401af47 split out DriverConfigInit from DriverConfigNew, but
then called it a bit late from libxlStateInitialize. The cfg is used in
libxlDriverConfigLoadFile and when uninitialized results in a crash.
Calling DriverConfigInit immediately after DriverConfigNew fixes the
crash.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce new 'multidevs' option for filesystem.
<filesystem type='mount' accessmode='mapped' multidevs='remap'>
<source dir='/path'/>
<target dir='mount_tag'>
</filesystem>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU 9pfs 'multidevs' option exists since QEMU 4.2. Probe QEMU's
command line set though to check whether this option is really
available, and if yes enable this new QEMU_CAPS_FSDEV_MULTIDEVS
capability on libvirt side.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all its helper functions are in qemu_validate.c, we can
move the function itself. The helpers can become static again since
they're all in the same file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This will allow to move qemuDomainDeviceDefValidate() itself in
the next patch in a cleaner way.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move the function and all its static helper functions.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function will remain public due to its usage in qemublocktest.c
even after moving qemuDomainDeviceDefValidate(). The position of its
header in qemu_validate.h is no accident.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This function alone requires other 3 static functions to be
moved as well, thus let's move it in its own patch.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
qemuDomainChrDefValidate() has a lot of static helpers functions
that needed to be moved as well.
Other functions from qemuDomainDeviceDefValidate() that were
also moved:
- qemuValidateDomainSmartcardDef
- qemuValidateDomainRNGDef
- qemuValidateDomainRedirdevDef
- qemuValidateDomainWatchdogDef
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The next big task is to move qemuDomainDeviceDefValidate() to
qemu_validation.c, which is a function that calls a lot of
other static helper functions. This patch starts it by moving
qemuDomainDeviceDefValidateAddress().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move the static functions qemuDomainValidateDef() uses, as well as
qemuDomainValidateDef() itself to qemu_validate.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch introduces a new file to host domain validations from
the QEMU driver. And to get things started, let's move
qemuDomainDefValidateFeatures() to this new file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is the only instance of g_autofree change applicable for
qemu_checkpoint.c
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When the comment in libvirtd.sasl was last updated with
commit fe772f24a6
Author: Cole Robinson <crobinso@redhat.com>
Date: Sat Oct 20 14:10:03 2012 -0400
daemon: Avoid 'Could not find keytab file' in syslog
it was noted that only old versions of kerberos would need the
environment variable to be set: that was more than seven years
ago, so it's safe to assume that none of our current target
platforms still requires that hack and setting the appropriate
key in the configuration file will be enough.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
libvirtd supports this feature, and virtqemud ultimately calls to
the same code so it does as well: advertise it in the sysconf file
for the latter, as is already the case for the former.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This follows the example set by libvirtd, and makes it easier for
the admin to tweak the timeout or disable it altogether.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While not terribly useful in general, tweaking each daemon's
timeout (or disabling it off altogether) is a valid use case which
we can very easily support while being consistent with what already
happens for libvirtd. This is a first step in that direction.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We're going to add many more later, so start by adjusting the
existing ones to more closely follow the example set by libvirtd.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When using systemd we want to take advantage of socket activation
instead of keeping daemons running all the time, so we default to
shutting them down after two minutes of inactivity.
At the same time, we want it to be possible for the admin to opt
out of this behavior and disable timeouts entirely. A very natural
way to do so would be to specify a zero-length timeout, but that's
currently not accepted by the command line parser. Address that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When redefining checkpoints from scratch we'd not set the 'current'
checkpoint if there wasn't any. This meant that the code wasn't ever
able to set a 'current' checkpoint as any other one looks up if the
parent of the redefined checkpoint is current.
Since the backup code then requires the current checkpoint to start the
lookup we'd not be able to perform a backup after restoring the
checkpoint hierarchy.
Reported-by: Eyal Shenitzky <eshenitz@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Skip the liveness and capability checks when redefining checkpoints as
we don't need qemu interactions to update the metadata.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a comment noting that job update can cause the pointer to be invalid
and thus should not be accessed after.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
No callers use it any more. Additionally if qemuBlockJobUpdate was
called with the last reference of the job e.g. in
qemuBlockJobRefreshJobs, the reading of the job state would happen from
freed memory.
Reported-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virStorageFileSupportsSecurityDriver ends up initializing the storage
file backend which after the recent changes to the daemon architecture
may end up dlopening of the backend modules.
Since this is required only for remote storage we can optimize the call
by moving the check whether the backend is supported to the branch which
deals with remote storage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Treat the shortcut for chowning local files as a stand-alone section
by returning success from it and refactor the rest so that the cleanup
section is inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The same timeout as libvirtd can't be used for virtlogd: even with
socket activation in place, any message produced by QEMU on its
standard output/error between when virtlogd quits due to the timeout
and when it's started again due to socket activation will get lost.
This reverts commit 02b6005063
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 2ace7a87a8 introduced a logic bug by an improperly
modified condition where we'd skip to the else branch when reusing of
external images was requested and blockdev is available.
The original intentions were to skip the backing store update with
blockdev.
Fix it by only asserting the boolean which was used to track whether we
support update of the backing store only when blockdev is not present
along with the appropriate rename.
https://bugzilla.redhat.com/show_bug.cgi?id=1820016
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When moving the formatting of this attributes from -drive
to -device, the QEMU_CAPS_USB_STORAGE_WERROR capability
was used, because usb-storage was the last device to gain
this capability.
However this lead to the assumption that QEMU binaries
without the usb-storage device do not support this,
leading to breakage on s390x with blockdev.
Fixes: bb4f3543bbhttps://bugzilla.redhat.com/show_bug.cgi?id=1819250
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Detect the werror property on SCSI and virtio disks.
But clear it if the QEMU supports usb-storage device without it
also supporting this option for usb-storage.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In previous commit:
commit e6afacb0fe
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Feb 12 12:26:11 2020 +0000
qemu: start/stop an event loop thread for domains
A bogus comment was added claiming we didn't need to shutdown the
event thread in the qemuProcessStop method, because this would be
done in the monitor EOF callback. This was wrong because the EOF
callback only runs in the case of a QEMU crash or a guest initiated
clean shutdown & poweroff. In the case where the libvirt admin
calls virDomainDestroy, the EOF callback never fires because we
have already unregistered the event callbacks. We must thus always
attempt to stop the event thread in qemuProcessStop.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For http/https URIs we need to preserve the query part as it may be
important to refer to the image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the storage source has the query part set, format it in the output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new attribute for holding the query part for http(s) disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we are refreshing the relative paths when doing the blockjobs we
no longer need to load them upfront when doing the snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Preservation of the relative relationship requires us to load the
backing store strings from the disk images. With blockdev we stopped
detecting the backing chain if it's specified in the XML so the relative
links were not loaded at that point. To preserve the functionality from
the pre-blockdev without accessing the backing chain unnecessarily
during VM startup we must refresh the relative links when relative
block commit or block pull is requested.
https://bugzilla.redhat.com/show_bug.cgi?id=1818655
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While it is impossible for VIR_ALLOC() to return an error, we
should be consistent with the rest of the code and not continue
initializing the virSecurityDeviceLabelDef structure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Even with GLib it is still possible for virQEMUCapsNew() to
return NULL because it calls virQEMUCapsInitialize() which is a
wrapper over pthread_once() which may fail. At least, we still
check for its retval. If it so happens that the virQEMUCapsNew()
fails and returns NULL, we should not dereference it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately, yajl_free() is not NOP on NULL. It really does
expect a valid pointer. Therefore, check whether the pointer we
want to pass to it is NULL or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The daemons are not supported on Win32 and therefore were not compiled
in that platform. However, with the daemon code sharing, all the code in
utils *is* compiled and it failed because `waitpid`, `fork`, and
`setsid` are not available. So, as before, let's not build them on
Win32 and make the code more portable by using existing vir* wrappers.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Several daemons have similar code around general daemon startup code.
Let's move it into a file and share it among them.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The quotes are forbidden only inside the value, but the value itself may
be enclosed in quotes. Fix the RNG schema and validator and add a test
case.
https://bugzilla.redhat.com/show_bug.cgi?id=1804750
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 5540acb9a2 added a minimum size verification for the target
size of ppc64 NVDIMMs but forgot to remove a MAX() size check that
was being used in earlier reviews of that commit. The size
verification makes this check unneeded since we're making sure
that guestArea will always be at least equal to ppc64AlignSize.
Fixes: 5540acb9a2
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is the only instance of g_autofree change applicable for
qemu_agent.c
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This fixes a FreeBSD build error from
commit a11a0e6e84
Author: Rafael Fonseca <r4f4rfs@gmail.com>
Date: Tue Mar 24 17:14:30 2020 +0100
bhyve: move video default logic to driver
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Move the liveness check prior to the capability check. If the VM is
offline the capabilities are not initialized and thus we'd report the
wrong error.
https://bugzilla.redhat.com/show_bug.cgi?id=1812531
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The code attempting to clean up after a failed pull mode backup job
wrongly entered monitor but didn't clean up nor exit monitor due to a
logic bug. Fix the condition.
Introduced in a1521f84a5https://bugzilla.redhat.com/show_bug.cgi?id=1817327
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move the liveness check prior to the capability check. If the VM is
offline the capabilities are not initialized and thus we'd report the
wrong error.
https://bugzilla.redhat.com/show_bug.cgi?id=1812531
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Host-model CPU definitions (and domain capabilities) will use the
original CPU models (without noTSX in their name) and explicitly disable
hle and rtm features. This way domains with host-model CPUs will be
migratable even to older versions of libvirt which do not support the
noTSX model variants.
The new models will be advertised in host capabilities and they may
be used explicitly with custom CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The element specifies whether a particular CPU model can be used when
creating a CPU definition from raw CPUID/MSR data. The @host attribute
determines whether the CPU model can be used (host='on') for creating
CPU definition for host capabilities. Usability of the model for domain
capabilities and host-model CPU definitions is controlled by the @guest
attribute.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
One of the mitigation methods for TAA[1] is to disable TSX
support on the host system. Linux added a mechanism to disable
TSX globally through the kernel command line, and many Linux
distributions now default to tsx=off. This makes existing CPU
models that have HLE and RTM enabled not usable anymore.
Add new versions of all CPU models that have the HLE and RTM
features enabled, that can be used when TSX is disabled in the
host system.
On systems disabling the features without those types defined
in cpu-maps users end up without modern CPU types in the list
of usable CPUs to use in the likes of virsh domcapabilities
or tools higher in the stack like virt-manager.
This adds:
-Cascadelake-Server-noTSX
-Icelake-Client-noTSX
-Icelake-Server-noTSX
-Skylake-Server-noTSX-IBRS
-Skylake-Client-noTSX-IBRS
Introduced in QEMU by commit v4.2.0-rc2-3-g9ab2237f19 (function)
and commit v4.2.0-rc2-4-g02fa60d101 (names)
References:
[1] TAA, TSX asynchronous Abort:
https://software.intel.com/security-software-guidance/insights/deep-dive-intel-transactional-synchronization-extensions-intel-tsx-asynchronous-aborthttps://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1853200
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Message-Id: <20200310104806.2723-2-christian.ehrhardt@canonical.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The PMU feature is enabled by default in ppc64 guests and can't
be disabled via Libvirt or QEMU [1]. The current PMU feature
implementation does not allow PMU to enabled or disabled in the
ppc64 guest. Declaring the PMU feature will make the 'pmu'
property to be passed on to QEMU, but this property isn't
available for ppc64:
qemu-kvm: can't apply global host-powerpc64-cpu.pmu=on: Property '.pmu' not found
A similar error is thrown when trying to disable the PMU.
This patch standardizes the PMU handling for ppc64 guests by:
- throwing an error if the user attempts to set the feature to
'off', given that this feature can't be turned off at all;
- allowing the feature to be declared as 'on' in the domain XML.
This is done by skipping ppc64 guests when creating the command
line for this feature.
[1] https://www.redhat.com/archives/libvir-list/2020-March/msg00874.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Hyperv features are supported by both x86 and aarch64. The <hyperv/>
declaration in the XML by itself is benign to other architectures,
but any of its 14 current features will break QEMU with an error
like this (from ppc64):
qemu-kvm: Expected key=value format, found hv_relaxed
This is a more extreme case than the one for apic eoi because we
would need an extra 'switch' statement, with all current Hyperv
features in the body of qemuDomainDefValidateFeatures(), to
check if the user attempted to activate any of them. It's easier to
simply fail to launch with any 'hyperv' declaration in the XML for
every arch which is not x86 and aarch64.
A fair disclaimer about Windows and PowerPC: the last Windows version
that ran in the architecture is the hall of famer Windows NT 4.0,
launched in 1996 and with end of extended support for the Server
version in 2004 [1]. I am acknowledging that there might be Windows
NT 4.0 users running in PowerPC, but not enough people running it
under KVM/QEMU to justify Libvirt allowing 'hyperv' to exist in the
domain XML of ppc64 domains.
[1] https://en.wikipedia.org/wiki/Windows_NT_4.0
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The 'pvspinlock' feature is x86 only. The "<pvspinlock/>" declaration
will always have a value 'on' or 'off', and both will break QEMU when
launching non-x86 guests. This is the error message for
"<pvspinlock state='on'/>" when running a ppc64 guest:
qemu-kvm: Expected key=value format, found +kvm_pv_unhalt
A similar error message is thrown for "<pvspinlock state='off'/>".
This patch prevents non-x86 guests from launching with any
pvspinlock setting with a more informative error message:
error: unsupported configuration: The 'pvspinlock' feature is not
supported for architecture 'ppc64' or machine type 'pseries'
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The "<apic/>" feature, although it's available only for x86 guests,
can be declared in the domain XML of other archs without errors.
But setting its 'eoi' attribute will break QEMU. For "<apic eoi='on'/>",
in a ppc64 guest:
qemu-kvm: Expected key=value format, found +kvm_pv_eoi
A similar error happens with eoi='off'.
One can argue that it's better to simply forbid launching non-x86
guests with "<apic/>" declared in the XML - it is a feature that
the architecture doesn't support and this would make it clearer
about it. This is sensible, but there are non-x86 guests that are
running with "<apic/>" declared in the domain (and A LOT of guests
running with "<acpi/>" for that matter, probably reminiscent of x86
templates that were reused for other archs) that will stop working if we
go this route.
A more subtle approach is to detect if the 'eoi' element is being set
for non-x86 guests and warn the user about it with a better error
message than the one QEMU provides. This is the new error message
when any value is set for the 'eoi' element in a ppc64 XML:
error: unsupported configuration: The 'eoi' attribute of the 'apic'
feature is not supported for architecture 'ppc64' or machine type
'pseries'.
https://bugzilla.redhat.com/show_bug.cgi?id=1236440
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Don't report cases when the guest information is not requested
explicitly and not present either.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetFSInfo can
suppress error reports if the function is not supported by the guest
agent.
Since this patch removes the last use of
qemuAgentErrorCommandUnsupported the whole function is deleted as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetTimezone can
suppress error reports if the function is not supported by the guest
agent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetOSInfo can
suppress error reports if the function is not supported by the guest
agent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetUsers can
suppress error reports if the function is not supported by the guest
agent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull in qemuAgentGetHostname so that we can suppress
error reports if the caller will not require them. Callers for now
always require error reporting but will be fixed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Return 0 on success to match the documentation. The callers only check
for negative values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases we don't want to log errors if an agent command is
unsupported. Wire it up into qemuAgentCheckError via qemuAgentCommandFull
and provide a thin wrapper (qemuAgentCommand) to prevent having to fix
all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuDomainGetGuestInfoCheckSupport' despite its name was not checking
whether the info types are supported. Convert the function to return
integers and include the check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The logic has been moved to the individual drivers.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately, advisory record locking lose the lock if any fd refering
to the file is closed. There doesn't seem to be a way to preserve the
lock atomically. We could eventually retake the lock if low pidfilefd
is required.
This fixes processes being leaked, as they are not killed in
virPidFileForceCleanupPath() if the lock can be taken. Here also, we may
consider this is not good enough, as a process may leak by simply
closing the pidfilefd.
Fixes commit d146105f1e ("virCommand:
Actually acquire pidfile instead of just writing it")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The WIP specification is hosted on slirp wiki at this point:
https://gitlab.freedesktop.org/slirp/libslirp/-/wikis/Slirp-Helper
We would need more feedback from various parties (including libvirt,
podman, and other developpers) before declaring a frozen version.
So for now, follow it, and feedback welcome!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the helper supports DBus, connect it to the bus and set its ID.
If the helper supports migration, register its ID to the list of
dbus-vmstate ID to migrate, and specify --dbus-incoming when
restoring the VM.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Helper processes may have their state migrated with QEMU data stream
thanks to the QEMU "dbus-vmstate".
libvirt maintains the list of helpers to be migrated. The
"dbus-vmstate" is added when required, and given the list of helper
Ids that must be migrated, on save & load sides.
See also:
https://git.qemu.org/?p=qemu.git;a=blob;f=docs/interop/dbus-vmstate.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This avoids trying to start a dbus-daemon when its already running.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a unit to start & stop a private dbus-daemon.
The daemon is meant to be started on demand, and associated with a
QEMU process. It should be stopped when the QEMU process is stopped.
The current policy is permissive like a session bus. Stricter
policies can be added later, following recommendations from:
https://git.qemu.org/?p=qemu.git;a=blob;f=docs/interop/dbus.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This code was based on a per-helper instance and peer-to-peer
connections. The code that landed in qemu master for v5.0 is relying
on a single instance and DBus bus.
Instead of trying to adapt the existing dbus-vmstate code, let's
remove it and resubmit. That should make reviewing easier.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the network driver code there's networkKillDaemon() which is
the same as virProcessKillPainfully(). Replace the former with
the later and drop what becomes unused function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now, that we know that the virtiofsd will have the pidfile open
and locked we can use virPidFileForceCleanupPath() to kill it and
unlink the pidfile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now, that we know that the slirp helper will have the pidfile
open and locked we can use virPidFileForceCleanupPath() to kill
it and unlink the pidfile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now, that our virCommandSetPidFile() is more intelligent we don't
need to rely on the daemon to create and lock the pidfile and use
virCommandSetPidFile() at the same time.
NOTE that as advertised in the previous commit, this was
temporarily broken, because both virCommand and
qemuProcessStartManagedPRDaemon() would try to lock the pidfile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Our virCommand module allows us to set a pidfile for commands we
want to spawn. The caller constructs the string of pidfile path
and then uses virCommandSetPidFile() to tell the module to write
the pidfile once the command is ran. This usually works, but has
two flaws:
1) the child process does not hold the pidfile open & locked.
Therefore, the caller (or anybody else) can't use our fancy
virPidFileForceCleanupPath() function to kill the command
afterwards. Also, for everybody else on the system it's
needlessly harder to check if the pid from the pidfile is still
alive or not.
2) if the caller ever makes a mistake and passes the same pidfile
path for two different commands, the start of the second command
will overwrite the pidfile even though the first command might
still be running.
NOTE that this temporarily renders some command spawning
unusable, specifically those code patterns where both
virCommandSetPidFile() is used together with instructing spawned
command to acquire pidfile itself. Fortunately, there is only one
occurrence of such pattern and it is in
qemuProcessStartManagedPRDaemon(). This is fixed in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Our code allows snapshots of NVMe based disks which means we create
overlay file with a 'json:{}' pseudo-uri refering to the NVME device.
Our parser code doesn't handle them though. Add the parser and test it
via the XML->json->XML round-trip and reference data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Format cookies into the backing store string without encryption as they
will not be visible on the command line when formatting a 'target' only
string. In cases when cookies or other options are used we must use the
JSON format rather than pure URI.
Add tests to validate the scenario.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce qemuBlockStorageSourceGetCookieString which does the
concatenation so that we can reuse it later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU requires an extra wrapper object where only the "file" member is
populated. This is basically a placeholder for establishing the format
layer. We did the same in qemuDiskSourceGetProps for the old-school
JSON usage with -drive but forgot to adopt this for -blockdev.
https://bugzilla.redhat.com/show_bug.cgi?id=1804617
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemublocktest showed that we don't add the "fat:" prefix for directory
storage when formatting the backing store string. While it's unlikely to
be used it's simple enough to actually implement the support rather than
trying to forbid it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support for pretty-printing of the JSON variant of the output for
consumption in tests. All current callers pass 'false'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_TRISTATE_BOOL_ABSENT which maps to the 'default' string would not be
parsed back, so we shouldn't format it either.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While 'namespace' is not a reserved word in C, it is in C++. Our
compilers are happy with it but syntax-hilighting in some editors
hilights is as a keyword. Rename it to prevent confusion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virHostCPUGetStatsLinux walks through every cpu in /proc/stat until it
finds cpu%cpuNum that matches with the requested cpu.
If none is found it logs the error but it should return -1, instead of 0.
Otherwise virsh nodecpustats --cpu <invalid cpu number> and API bindings
don't fail properly, printing a blank line instead of an error message.
This patch also includes an additional test for virhostcputest to avoid
this regression to happen again in the future.
Fixes: 93af79fba3
Reported-by: Satheesh Rajendran <satheera@in.ibm.com>
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
There is no need to repeat the shortName, since it's
already present in the directory path.
Also use just 'fs' instead of 'virtiofsd'.
https://bugzilla.redhat.com/show_bug.cgi?id=1816577
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using the 'uuid' element for ppc64 NVDIMM memory added in the
previous patch, use it in qemuBuildMemoryDeviceStr() to pass
it over to QEMU.
Another ppc64 restriction is the necessity of a mem->labelsize,
given than ppc64 only support label-area backed NVDIMMs.
Finally, we don't want ppc64 NVDIMMs to align up due to the
high risk of going beyond the end of file with a 256MiB
increment that the user didn't predict. Align it down
instead. If target size is less than the minimum of
256MiB + labelsize, error out since QEMU will error out
if we attempt to round it up to the minimum.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
ppc64 NVDIMM support was implemented in QEMU by commit [1].
The support is similar to what x86 already does, aside from
an extra 'uuid' element.
This patch introduces a new optional 'uuid' element for the
NVDIMM memory model. This element behaves like the 'uuid'
element of the domain definition - if absent, we'll create
a new one, otherwise use the one provided by the XML.
The 'uuid' element is exclusive to pseries guests and are
unavailable for other architectures.
Next patch will use this new element to add NVDIMM support
for ppc64.
[1] ee3a71e366
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The functionality is now provided by glib's GKeyFile.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace libvirt's virKeyFile by glib's GKeyFile.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function changes the amount of time that libvirt waits for a
response from the guest agent for all guest agent commands. Since this
is a configuration change, it should not be allowed on read-only
connections.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The agent 'guest-sync' command historically had a 5s response timeout
which was different from other agent commands, which waited forever.
When we added the ability to customize the response timeout for guest
agent commands, we intended to continue to use 5s for 'guest-sync' when
the user specified a response timeout greater than 5s, and use the
user-specified timeout if it was below 5s. Unfortunately, when
attempting to determine whether the user-specified timeout was less than
5s, we were comparing against an enum value of
VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT (which is -1) rather than against
the actual time value that it represented (5).
This change makes it so that 'guest-sync' now uses the user-specified
tiemout if it is less than 5s.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use existing function built for this exact purpose.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When a QEMU process dies in the middle of a hotplug, then we fail
to restore the seclabels on the device. The problem is that if
the thread doing hotplug locks the domain object first and thus
blocks the thread that wants to do qemuProcessStop(), the
seclabel cleanup code will see vm->pid still set and mount
namespace used and therefore try to enter the namespace
represented by the PID. But the PID is gone really and thus
entering will fail and no restore is done. What we can do is to
try enter the namespace (if requested to do so) but if entering
fails, fall back to no NS mode.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1814481
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
When running a function in a forked child, so far the only thing
we could report is exit status of the child and the error
message. However, it may be beneficial to the caller to know the
actual error that happened in the child.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The @src is not always a file. It may also be a directory (for
instance qemuDomainCreateDeviceRecursive() assumes that) - even
though it doesn't happen usually. Anyway, mount() can mount only
a dir onto a dir and a file onto a file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The @devPath variable is not modifiable. It merely just points to
string containing path where private devtmpfs is being
constructed. Make it const so it doesn't look weird that it's not
freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
If building namespace fails somewhere in the middle (that is some
files exists under devMountsSavePath[i]), then plain rmdir() is
not enough to remove dir. Umount the temp location and use
virFileDeleteTree() to remove the directory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The virFileMakePathWithMode() which is our recursive version of
mkdir() fails, it simply just returns a negative value with errno
set. No error is reported (as compared to virFileTouch() for
instance).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
For the few instances where we'd generate an array in dotted syntax we
should be able to parse it back. Add another step in deflattening of the
dotted syntax which reconstructs the arrays so that the backing store
parser can parse it.
https://bugzilla.redhat.com/show_bug.cgi?id=1466177
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extract the code so that there's a clean separation once we'll want do
do other steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory handling to remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virBitmapNewEmpty can't fail now so we can make it obvious and fix all
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virStorageEncryptionSecretPtr may have a string inside it, thus we must
copy the string too. Use virSecretLookupDefCopy to do that.
Caused by non-obvious code introduced in 756b46ddd2 and later 47e88b33b
which added a string that needed to be copied.
https://bugzilla.redhat.com/show_bug.cgi?id=1814923
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function always returns succes so there's no need for a return
value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuBlockStorageSourceGetFormatRawProps aggregated both formats but
since we now have props specific for either of those formats it's
unwanted to aggregate the code such way. Split out the 'luks' props
formatter into qemuBlockStorageSourceGetFormatLUKSProps.
The wrong separation demonstrates istself on formatting of the 'size'
and 'offset' attributes for the 'luks' driver which does not conform
to the qapi schema.
https://bugzilla.redhat.com/show_bug.cgi?id=1814975
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'luks' driver in qemu is as any other non-raw format driver and thus
doesn't support the properties for 'slice'. Since libvirt considers
luks files to be raw+encryption we need to special case them when
dealing with the slice.
https://bugzilla.redhat.com/show_bug.cgi?id=1814975
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce qemuBlockStorageSourceNeedsStorageSliceLayer which will hold
the decision logic and fix all places that open-code it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A fixup to patch [1]. We need to reset await_event in all
error paths.
[1] 52532073d : qemu: remove redundant needReply argument of qemuAgentCommand
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In one of my previous commits I've introduced code that creates
all devices for given (possible) multipath target. But I've made
a mistake there - the code accesses 'next->path' without checking
if the disk source is local. Note that the 'next->path' is
NULL/doesn't make sense for VIR_STORAGE_TYPE_NVME.
Fixes: a30078cb83
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1814947
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It seems like CD-ROMs may have no 'fileName' property specified in case
there is nothing configured as attachment for the drive. Hence, make
sure that virVMXParseDisk() do not consider it mandatory anymore,
considering it an empty block cdrom device. Sadly virVMXParseDisk() is
used also to parse disk and floppies, so make sure that a NULL fileName
is handled in cdrom- and floppy-related paths.
https://bugzilla.redhat.com/show_bug.cgi?id=1808610
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Move earlier the checks for skipping a hard disk when parsing a CD-DROM,
and for skipping a CD-ROM when parsing a hard disk. This should have no
behaviour changes, and avoids to add repeated checks in following
commits.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Many calls of qemuMonitorDelObject don't actually check the return value
or report the error from the object deletion itself since they are on
cleanup paths. In some cases this can lead to reporting of spurious
errors e.g. when qemuMonitorDelObject is used to clean up a possibly
pre-existing objects.
Add a new argument for qemuMonitorDelObject which controls whether
the internals report errors from qemu and fix all callers accordingly.
Note that some of the cases on device unplug which check the error code
don't in fact propagate the error to the user, but in this case it is
important to add the log entry anyways for tracing that the device
deletion failed.
https://bugzilla.redhat.com/show_bug.cgi?id=1784040
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases we'll need to check whether there was an error but avoid
reporting an actual libvirt error. Rename qemuMonitorJSONCheckError to
qemuMonitorJSONCheckErrorFull with a new flag to suppress the error
reporting and add a wrapper with the original name so that callers don't
need to be fixed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use 'g_autoptr' and remove the cleanup label and ret variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When changing media we'd attempt to remove the managed pr daemon even if
neither of the images involved in the media change used it. This caused
libvirtd to log a spurious error:
2020-03-18 01:41:19.832+0000: 643207: error : qemuMonitorJSONCheckError:412 : internal error: unable to execute QEMU command 'object-del': object 'pr-helper0' not found
With this patch we completely avoid calling the deletion code.
https://bugzilla.redhat.com/show_bug.cgi?id=1814486
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The loop which checks whether the vcpus are in proper configuration for
the requested hot(un)plug skips the first modified vcpu. This means
that 'firstvcpu' which is used to print the error message in case the
configuration is not suitable would never point to the first modified
vcpu.
In cases such as:
<vcpu placement='auto' current='5'>8</vcpu>
<vcpus>
<vcpu id='0' enabled='yes' hotpluggable='no'/>
<vcpu id='1' enabled='yes' hotpluggable='no'/>
<vcpu id='2' enabled='yes' hotpluggable='no'/>
<vcpu id='3' enabled='yes' hotpluggable='no'/>
<vcpu id='4' enabled='yes' hotpluggable='no'/>
<vcpu id='5' enabled='no' hotpluggable='yes'/>
<vcpu id='6' enabled='no' hotpluggable='yes'/>
<vcpu id='7' enabled='no' hotpluggable='yes'/>
</vcpus>
# virsh setvcpu --config --disable upstream 1
error: invalid argument: vcpu '-1' can't be modified as it is followed by non-hotpluggable online vcpus
After this fix the proper vcpu is reported in the error message:
# virsh setvcpu --config --disable upstream 1
error: invalid argument: vcpu '1' can't be modified as it is followed by non-hotpluggable online vcpu
https://bugzilla.redhat.com/show_bug.cgi?id=1611061
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
So far, when using the qemu:///embed driver, management
applications can't chose whether they want to register their
domains in machined or not. While having that option is certainly
desired, it will require more work. What we can do meanwhile is
to generate names that include part of hash of the root
directory. This is to ensure that if two applications using
different roots but the same domain name (and ID) start the
domain no clashing name for machined is generated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When initializing virQEMUDriverConfig structure we are given the
root directory for possible embed connection. Save it for future
use. While we could get it later from @uri member, it's not as
easy as dereferencing a pointer (virURIParse() +
virURIGetParam() + error reporting).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The check attribute was completely ignored for host-passthrough CPUs
even if they explicitly requested some features to be enabled. For
example, a domain with the following CPU definition
<cpu mode='host-passthrough' check='full'>
<feature policy='require' name='svm'/>
</cpu>
would happily start even when 'svm' cannot be enabled.
Let's call virCPUArchUpdateLive for host-passthrough CPUs with
VIR_CPU_CHECK_FULL to make sure the architecture specific code can
validate the provided virtual CPU against the desired definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1515677
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adding more checks into the existing if statements would turn them into
an unreadable mess.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The updateLive CPU sub-driver function is supposed to be called only for
a subset of CPU definitions. Let's make it more obvious by turning a
negative test and return into a positive check.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This commit is related to RTC timer device too. HPET is being shared
from host device through `localtime` clock. This timer is available
creating a new timer using `hpet` name.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
