Future kernels will mandate the use of nosuid+nodev+noexec
flags when mounting the /proc/sys filesystem. Unconditionally
add them now since they don't harm things regardless and could
mitigate future security attacks.
Upping an interface for no reason and not configuring it is a cardinal sin.
With the default addrgenmode if eui64 it sticks a link-local address to the
interface. That is not good, as NetworkManager would see an address configured,
assume the interface is already configured and won't touch it iself and the
interface might stay unconfigured until the end of the days.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1124721
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add more logging to the lxc controller and container files to
facilitate debugging startup problems. Also make it clear when
the container is going to close stdout and thus no longer do
any logging.
Some programs want to change some values for the network interfaces
configuration in /proc/sys/net/ipv[46] folders. Giving RW access on them
allows wicked to work on openSUSE 13.2+.
Reusing the lxcNeedNetworkNamespace function to tell
lxcContainerMountBasicFS if the netns is disabled. When no netns is
set up, then we don't mount the /proc/sys/net/ipv[46] folder RW as
these would provide full access to the host NICs config.
virReportSystemError is reserved for reporting system errors, calling it
with VIR_ERR_* error codes produces error messages that do not make any
sense, such as
internal error: guest failed to start: Kernel doesn't support user
namespace: Link has been severed
We should prohibit wrong usage with a syntax-check rule.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The typical case where we had a problem is with such a filesystem
definition as created by virt-sandbox-service:
<filesystem type='bind' accessmode='passthrough'>
<source dir='/var/lib/libvirt/filesystems/mysshd/var'/>
<target dir='/var'/>
</filesystem>
In this case, we don't want to unmount the /var subtree or we may
loose the access to the source folder.
Resolving symlinks can fail before mounting any file system if one file
system depends on another being mounted. Symlinks are now resolved in
two passes:
* Before any file system is mounted, but then we are more gentle if
the source path can't be accessed
* Right before mounting a file system, so that we are sure that we
have the resolved path... but then if it can't be accessed we raise
an error.
A domain without a console quietly dies soon after start,
because we try to set /dev/null as a controlling TTY
2014-10-30 15:10:59.705+0000: 1: error : lxcContainerSetupFDs:283 :
ioctl(TIOCSCTTY) failed: Inappropriate ioctl for device
Report an error early instead of trying to start it.
https://bugzilla.redhat.com/show_bug.cgi?id=1155410
We lacked of HOME environment variable,
set 'HOME=/' as default.
The kernel sets up $HOME for the init process.
Therefore any init can assume that $HOME is set.
libvirt currently violates that implicit rule.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Memory is allocated for 'mnt_src' by VIR_STRDUP in the loop. Next
loop it will be allocated again. So we need to free 'mnt_src'
before continue the loop.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
The patch described above introduced two problems caught by the compiler
and thus breaking the build.
One of the problems was comparison of unsigned with < 0 and the second
one jumped a variable init.
Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:
<mknod state="on"/>, keep CAP_MKNOD capability
<sys_chroot state="off"/> drop CAP_SYS_CHROOT capability
Users can restrict or give more capabilities than the default using
this mechanism.
kernel commit 7dc5dbc879bd0779924b5132a48b731a0bc04a1e
forbid us doing a fresh mount for sysfs
when enable userns but disable netns.
This patch will create a bind mount in this senario.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
LXC network devices can now be assigned a custom NIC device name on the
container side. For example, this is configured with:
<interface type='network'>
<source network='default'/>
<guest dev="eth1"/>
</interface>
In this example the network card will appear as eth1 in the guest.
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Right now, a caller waiting for a child process either requires
the child to have status 0, or must use WIFEXITED() and friends
itself. But in many cases, we want the middle ground of treating
fatal signals as an error, and directly accessing the normal exit
value without having to use WEXITSTATUS(), in order to easily
detect an expected non-zero exit status. This adds the middle
ground to the low-level virProcessWait; the next patch will add
it to virCommand.
* src/util/virprocess.h (virProcessWait): Alter signature.
* src/util/virprocess.c (virProcessWait): Add parameter.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/vircommand.c (virCommandWait): Likewise.
* src/util/virfile.c (virFileAccessibleAs): Likewise.
* src/lxc/lxc_container.c (lxcContainerHasReboot)
(lxcContainerAvailable): Likewise.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virDomainGetRootFilesystem method can be generalized to allow
any filesystem path to be obtained.
While doing this, start a new test case for purpose of testing various
helper methods in the domain_conf.{c,h} files, such as this one.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Systemd specified that any /dev/pts/NNN device on which it
is expected to spawn a agetty login, should be listed in
the 'container_ttys' env variable. It should just contain
the relative paths, eg 'pts/0' not '/dev/pts/0' and should
be space separated.
http://cgit.freedesktop.org/systemd/systemd/commit/?id=1d97ff7dd71902a5604c2fed8964925d54e09de9
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, if virFileMakePath() fails, the @ret is left initialized from
virAsprintf() just a few lines above leading to a wrong return value of
zero whereas -1 should be returned.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When setting up filesystems backed by block devices or file
images, the SELinux mount options must be used to ensure the
correct context is set
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the code for lxcContainerGetSubtree into the virfile
module creating 2 new functions
int virFileGetMountSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
int virFileGetMountReverseSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
Add a new virfiletest.c test case to validate the new code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Also after commit 5ff9d8a65ce80efb509ce4e8051394e9ed2cd942
vfs: Lock in place mounts from more privileged users,
unprivileged user has no rights to umount the mounts that
inherited from parent mountns.
right now, I have no good idea to fix this problem, we need
to do more research. this patch just skip unmounting these
mounts for shared root.
BTW, I think when libvirt lxc enables user namespace, the
configuation that shares root with host is very rara.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
After kernel commit 5ff9d8a65ce80efb509ce4e8051394e9ed2cd942
vfs: Lock in place mounts from more privileged users,
unprivileged user has no rights to move the mounts that
inherited from parent mountns. we use this feature to move
the /stateDir/domain-name.{dev, devpts} to the /dev/ and
/dev/pts directroy of container. this commit breaks libvirt lxc.
this patch changes the behavior to bind these mounts when
user namespace is enabled and move these mounts when user
namespace is disabled.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/lxc/lxc_container.c: Consistently use commas.
* src/openvz/openvz_driver.c: Likewise.
* src/openvz/openvz_util.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently we were storing domain feature flags in a bit field as the
they were either enabled or disabled. New features such as paravirtual
spinlocks however can be tri-state as the default option may depend on
hypervisor version.
To allow storing tri-state feature state in the same place instead of
having to declare dedicated variables for each feature this patch
refactors the bit field to an array.
Currently the LXC container tries to skip selinux/securityfs
mounts if the directory does not exist in the filesystem,
or if SELinux is disabled.
The former check is flawed because the /sys/fs/selinux
or /sys/kernel/securityfs directories may exist in sysfs
even if the mount type is disabled. Instead of just doing
an access() check, use an virFileIsMounted() to see if
the FS is actually present in the host OS. This also
avoids the need to check is_selinux_enabled().
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some mounts must be skipped if running inside a user namespace,
since the kernel forbids their use. Instead of strcmp'ing the
filesystem type in the body of the loop, set an explicit flag
in the lxcBasicMounts table.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the lxcBasicMounts array has separate entries for
most mounts, to reflect that we must do a separate mount
operation to make mounts read-only. Remove the duplicate
entries and instead set the MS_RDONLY flag against the main
entry. Then change lxcContainerMountBasicFS to look for the
MS_RDONLY flag, mask it out & do a separate bind mount.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'srcpath' variable is initialized from 'mnt->src' and never
changed thereafter. Some places continue to use 'mnt->src' and
others use 'srcpath'. Remove the pointless 'srcpath' variable
and use 'mnt->src' everywhere.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virLXCBasicMountInfo struct contains a 'char *opts'
field passed onto the mount() syscall. Every entry in the
list sets this to NULL though, so it can be removed to
simplify life.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The lxcContainerSetID() method prints a misleading log
message about setting the uid/gid when no ID map is
present in the XML config. Skip the debug message in
this case.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
The lxcContainerResolveSymlinks method merely logged some errors
as debug messages, rather than reporting them as proper errors.
This meant startup failures were not diagnosed at all.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure the lxcContainerMain method reports any errors that
occur during setup to stderr, where libvirtd will pick them
up.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
