The parameter allows overriding default listen address for '-incoming'
cmd line argument on destination.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make it much easier to test a configuration built without readline
support, by reusing our existing library probe machinery. It gets
a bit tricky with readline, which does not provide a pkg-config
snippet, and which on some platforms requires one of several
terminal libraries as a prerequiste, but the end result should be
the same default behavior but now with the option to disable things.
* m4/virt-readline.m4 (LIBVIRT_CHECK_READLINE): Simplify by using
LIBVIRT_CHECK_LIB.
* tools/virsh.c: Convert USE_READLINE to WITH_READLINE.
Signed-off-by: Eric Blake <eblake@redhat.com>
'make distcheck' fails from a directory configured --without-lxc:
GEN virt-login-shell.1
Can't write-open ../../tools/virt-login-shell.1: Permission denied at /usr/bin/pod2man line 69.
* tools/Makefile.am (EXTRA_DIST): Ship pre-built man page.
Signed-off-by: Eric Blake <eblake@redhat.com>
It's possible to create a domain which will only use a TLS port
and will not have a non-TLS port set by using:
<graphics type='spice' autoport='yes' defaultMode='secure'/>
In such a setup, the 'graphics' node for the running domain will be:
<graphics type='spice' tlsPort='5900'
autoport='yes' listen='127.0.0.1'
defaultMode='secure'>
However, cmdDomDisplay loops over all the 'graphics' node, and it
ignores nodes which don't have a 'port' attribute. This means
'virsh domdisplay' will only return an empty string for domains
as the one above.
This commit looks for both 'port' and 'tlsPort' before deciding
to ignore a graphics node. It also makes sure 'port' is not printed
when it's not set.
This makes 'virsh domdisplay' return
'spice://127.0.0.1?tls-port=5900' for domains using only a TLS
port.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
After commit 8aecd35126 it'll detect
that a required option is not defined and it will assert and exit with:
virsh.c:1364: vshCommandOpt: Assertion `valid->name' failed.
Problem has been latent since commit ed23b106.
Signed-off-by: Eric Blake <eblake@redhat.com>
completer and completer_flags added to the _vshCmdOptDef
structure so it will be possible for completion generators to
conveniently call option completer functions with desired flags.
Signed-off-by: Eric Blake <eblake@redhat.com>
Some systems apparently have a global variable/function called remove
and thus break compilation of virsh-domain.c. Rename the variable to
avoid this.
Reported by GuanQiang.
Since the maxvcpus command query the maximum number of virtual
CPUs supported for a guest VM on this connection, it should be
in virsh-host.c but not virsh-domain.c.
Signed-off-by: yangdongsheng <yangds.fnst@cn.fujitsu.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1006864
Commit 38ab1225 changed the default value of ret from true to false but
forgot to set ret = true when job is NONE. Thus, virsh domjobinfo
returned 1 when there was no job running for a domain but it used to
(and should) return 0 in this case.
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Recent patches to fix handling of Ctrl-C when interacting with
ssh are not portable to mingw, which lacks termios handling.
The simplest solution is to just compile that code out, and
if someone ever appears that has a serious interest in getting
virsh fully functional even with ssh connections, they can
provide patches at that time.
* tools/virsh.h (_vshControl): Make termattr conditional.
* tools/virsh.c (vshTTYIsInterruptCharacter)
(vshTTYDisableInterrupt, vshTTYRestore, cfmakeraw, vshTTYMakeRaw)
(main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Automake has builtin support to prevent botched conditional nesting,
but only if you use:
if FOO
else !FOO
endif !FOO
An example error message when using the wrong name:
daemon/Makefile.am:378: error: else reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
daemon/Makefile.am:381: error: endif reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
As our makefiles tend to have quite a bit of nested conditionals,
it's better to take advantage of the benefits of the build system
double-checking that our conditionals are well-nested, but that
requires a syntax check to enforce our usage style.
Alas, unlike C preprocessor and spec files, we can't use indentation
to make it easier to see how deeply nesting goes.
* cfg.mk (sc_makefile_conditionals): New rule.
* daemon/Makefile.am: Enforce the style.
* gnulib/tests/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The vshWatchJob function registers a SIGINT handler that is used to
abort the active job and does not terminate virsh. Unfortunately, this
breaks when using the ssh transport as SIGINT is sent to the foreground
process group including the ssh transport processes which terminate.
This breaks the connection and migration is left in a insane state.
With this patch the terminal is modified to ignore key binding that
sends SIGINT and does the handling manually.
Resoves: https://bugzilla.redhat.com/show_bug.cgi?id=983348
This patch adds instrumentation to allow modification of config of the
terminal in virsh and successful reset of the state afterwards.
The added helpers allow to disable receiving of SIGINT when pressing the
key sequence (Ctrl+C usualy). This normally sends SIGINT to the
foreground process group which kills ssh processes used for transport of
the data.
When virBufferError is ok in cmdAttachDisk, the latter
should 'goto cleanup', instead of returning a false to
prevent memory leaking.
Signed-off-by: Eric Blake <eblake@redhat.com>
I noticed from an ./autobuild.sh run that we were installing a
virt-login-shell.exe binary when cross-building for mingw,
even though such a binary is necessarily worthless since the
code depends on lxc which is a Linux-only concept.
* tools/Makefile.am (conf_DATA, bin_PROGRAMS, dist_man1_MANS):
Make virt-login-shell installation conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
Noticed while reviewing another patch that had an accidental
mismatch due to refactoring. An audit of the code showed that
very few callers of vshCommandOpt were expecting a return of
-2, indicating programmer error, and of those that DID check,
they just propagated that status to yet another caller that
did not check. Fix this by making the code blatantly warn
the programmer, rather than silently ignoring it and possibly
doing the wrong thing downstream.
I know that we frown on assert()/abort() inside libvirtd
(libraries should NEVER kill the program that linked them),
but as virsh is an app rather than the library, and as this
is not the first use of assert() in virsh, I think this
approach is okay.
* tools/virsh.h (vshCommandOpt): Drop declaration.
* tools/virsh.c (vshCommandOpt): Make static, and add a
parameter. Abort on programmer errors rather than making callers
repeat that logic.
(vshCommandOptInt, vshCommandOptUInt, vshCommandOptUL)
(vshCommandOptString, vshCommandOptStringReq)
(vshCommandOptLongLong, vshCommandOptULongLong)
(vshCommandOptBool): Adjust callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Surprisingly, augtool get (or print) returns "path = value" while we are
only interested in the value. We need to remove the "path = " part from
the augtool's output. The following is an example of the augtool command
as used in virt-sanlock-cleanup script:
$ augtool get /files/etc/libvirt/qemu-sanlock.conf/disk_lease_dir
/files/etc/libvirt/qemu-sanlock.conf/disk_lease_dir = /var/lib/libvirt/sanlock
Commit a0b6a36f "fixed" what abfff210 broke (URI precedence), but
there was still one more thing missing to fix. When using virsh
parameters to setup debugging, those weren't honored, because at the
time debugging was initializing, arguments weren't parsed yet. To
make ewerything work as expected, we need to initialize the debugging
twice, once before debugging (so we can debug option parsing properly)
and then again after these options are parsed.
As a side effect, this patch also fixes a leak when virsh is ran with
multiple '-l' parameters.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since 785ff34bf8 we are using the outputStr variable in cleanup label.
However, there is a possibility to jump to the label before the variable
has been declared:
virsh-pool.c: In function 'cmdPoolList':
virsh-pool.c:1121:25: error: jump skips variable initialization [-Werror=jump-misses-init]
goto asprintf_failure;
^
virsh-pool.c:1308:1: note: label 'asprintf_failure' defined here
asprintf_failure:
^
virsh-pool.c:1267:11: note: 'outputStr' declared here
char *outputStr = NULL;
VIR_FREE(caps) is not enough to free an array allocated
by vshStringToArray.
==17== 4 bytes in 1 blocks are definitely lost in loss record 4 of 728
==17== by 0x4EFFC44: virStrdup (virstring.c:554)
==17== by 0x128B10: _vshStrdup (virsh.c:125)
==17== by 0x129164: vshStringToArray (virsh.c:218)
==17== by 0x157BB3: cmdNodeListDevices (virsh-nodedev.c:409)
https://bugzilla.redhat.com/show_bug.cgi?id=1001536
==23== 41 bytes in 1 blocks are definitely lost in loss record 626 of 727
==23== by 0x4F0099F: virAsprintfInternal (virstring.c:358)
==23== by 0x15D2C9: cmdPoolList (virsh-pool.c:1268)
https://bugzilla.redhat.com/show_bug.cgi?id=1001536
virsh secret-list leak when no secrets are defined:
==27== 8 bytes in 1 blocks are definitely lost in loss record 6 of 726
==27== by 0x4E941DD: virAllocN (viralloc.c:183)
==27== by 0x5037F1A: remoteConnectListAllSecrets (remote_driver.c:3076)
==27== by 0x5004EC6: virConnectListAllSecrets (libvirt.c:16298)
==27== by 0x15F813: vshSecretListCollect (virsh-secret.c:397)
==27== by 0x15F0E1: cmdSecretList (virsh-secret.c:532)
And so do some other *-list commands.
https://bugzilla.redhat.com/show_bug.cgi?id=1001536
The messages were only freed on error.
==12== 1,100 bytes in 1 blocks are definitely lost in loss record 698 of 729
==12== by 0x4E98C22: virBufferAsprintf (virbuffer.c:294)
==12== by 0x12C950: vshOutputLogFile (virsh.c:2440)
==12== by 0x12880B: vshError (virsh.c:2254)
==12== by 0x131957: vshCommandOptDomainBy (virsh-domain.c:109)
==12== by 0x14253E: cmdStart (virsh-domain.c:3333)
https://bugzilla.redhat.com/show_bug.cgi?id=1001536
virsh cpu-stats guest --start 0 --count 3
It outputs right but the return value is 1 rather than 0
echo $?
1
Found by running libvirt-autotest
./run -t libvirt --tests virsh_cpu_stats
Commit abfff210 changed the order of vshParseArgv() and vshInit() in
order to make fix debugging of parameter parsing. However, vshInit()
did a vshReconnect() even though ctl->name wasn't set according to the
'-c' parameter yet. In order to keep both issues fixed, I've split
the vshInit() into vshInitDebug() and vshInit().
One simple memleak of ctl->name is fixed as a part of this patch,
since it is related to the issue it's fixing.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=999323
When using virsh secret-list - if the secret types are cephx or iscsi,
then allow fetch/print of the usage information. Prior to the change
the following would print:
UUID Usage
-----------------------------------------------------------
1b40a534-8301-45d5-b1aa-11894ebb1735 Unused
a5ba3efe-6adf-4a6a-b243-f010a043e314 Unused
Afterwards:
UUID Usage
-----------------------------------------------------------
1b40a534-8301-45d5-b1aa-11894ebb1735 ceph ceph_example
a5ba3efe-6adf-4a6a-b243-f010a043e314 iscsi libvirtiscsi
Use the new semantics of vshStringToArray to avoid leaking the array of
volumes to be deleted. The array would be leaked in case the first
volume was found in the domain definition. Also refactor the code a bit
to sanitize naming of variables hoding arrays and dimensions of the
arrays.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=996050
At a slightly larger memory expense allow stealing of items from the
string array returned from vshStringToArray and turn the result into a
string list compatible with virStringSplit. This will allow to use the
common dealloc function.
This patch also fixes a few forgotten checks of return from
vshStringToArray and one memory leak.
We were failing to autoprobe which schema to use for several
top-level XML elements.
* tools/virt-xml-validate.in (TYPE): Recognize <domainsnapshot>,
<filter>, and <secret>.
Signed-off-by: Eric Blake <eblake@redhat.com>
All good tools should have --help and --version output :)
Furthermore, we want to ensure a failed exit if xmllint fails,
or even for 'virt-xml-validate > /dev/full'.
* tools/virt-xml-validate.in: Add option parsing. Output errors
to stderr. Update documentation to match.
* tools/Makefile.am (virt-xml-validate): Substitute version.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently the virConnectBaselineCPU API does not expose the CPU features
that are part of the CPU's model. This patch adds a new flag,
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly
list all features that are part of that model.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=997765
==1349431== 8 bytes in 1 blocks are definitely lost in loss record 11 of 760
==1349431== at 0x4C2A554: calloc (vg_replace_malloc.c:593)
==1349431== by 0x4E9AA3E: virAllocN (in /usr/lib64/libvirt.so.0.1001.1)
==1349431== by 0x4EF28C4: virXPathNodeSet (in /usr/lib64/libvirt.so.0.1001.1)
==1349431== by 0x130B83: cmdCPUBaseline (in /usr/bin/virsh)
==1349431== by 0x12C608: vshCommandRun (in /usr/bin/virsh)
==1349431== by 0x12889A: main (in /usr/bin/virsh)
Address a number of code, style and docs issues identified
in review of virt-login-shell after it was merged.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid having to assign a failure code to the returned variable switch
this function to negative logic. This will fix issue with invalid number
of cpus returning success return code.
https://bugzilla.redhat.com/show_bug.cgi?id=996466
I attempted 'virsh blockcopy $dom vda $path --wait --verbose', then
hit Ctrl-C; I was a bit surprised to see this error message:
Block Copy: [ 3 %]error: failed to query job for disk vda
when I had been expecting:
Block Copy: [ 3 %]
Copy aborted
* tools/virsh-domain.c (cmdBlockCopy): Print graceful exit message
rather than error when ctrl-c interrupts job.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virLoginShellAllowedUser method must not free the 'groups'
parameter it is given, as that is owned by the caller.
The virLoginShellAllowedUser method should be checking
'!*ptr' (ie empty string) rather than '!ptr' (NULL string)
since the latter cannot be true.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virt-login-shell.c was failing to compile with
CC virt_login_shell-virt-login-shell.o
virt-login-shell.c: In function 'main':
virt-login-shell.c:205:5: error: implicit declaration of function 'setlocale' [-Werror=implicit-function-declaration]
virt-login-shell.c:205:5: error: nested extern declaration of 'setlocale' [-Werror=nested-externs]
virt-login-shell.c:205:20: error: 'LC_ALL' undeclared (first use in this function)
Add a virt-login-shell binary that can be set as a user's
shell, such that when they login, it causes them to enter
the LXC container with a name matching their user name.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_DOMAIN_PAUSED_GUEST_PANICKED constant is badly named,
leaking the QEMU event name. Elsewhere in the API we use
'CRASHED' rather than 'PANICKED', and the addition of 'GUEST'
is redundant since all events are guest related.
Thus rename it to VIR_DOMAIN_PAUSED_CRASHED, which matches
with VIR_DOMAIN_RUNNING_CRASHED and VIR_DOMAIN_EVENT_CRASHED.
It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to rename before 1.1.1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_DOMAIN_SHUTDOWN_CRASHED state constant does not appear
to be used in the QEMU code anyway. It also doesn't make much
(any) sense, since the 'shutdown' state is a transient state
between 'running' and 'shutoff' and when a guest crashes, it
does not end up in a 'shutdown' state, only 'shutoff'.
It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to remove before 1.1.1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Noticed that the expected "not supported" error is dropped when
invoking 'virsh snapshot-list dom' on a Xen installation running
the libxl driver
virsh snapshot-list test
error: Invalid snapshot: virDomainSnapshotFree
The error is overwritten by a call to virDomainSnapshotFree
in cleanup code within cmdSnapshotList. Prevent overwritting
the real error by not calling virDomainSnapshotFree with a NULL
virDomainSnapshotPtr.
Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=923053
When cdrom is block type, the virsh change-media failed to insert
source info because virsh uses "<source block='/dev/sdb'/>" while
the correct name of the attribute for block disks is "dev".
Add a "--pass-fds N,M,..." arg to the virsh start/create
methods. This allows pre-opened file descriptors from the
shell to be passed on into the guest
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the virDomainSetMemoryStatsPeriodFlags() to pass a period defined by
usage of a new --period option in order to set the collection period for the
balloon driver. This may enable or disable the collection based on the value.
Add the --current, --live, & --config options to dommemstat.
Recent changes uncovered FORWARD_NULL and NEGATIVE_RETURNS problems with
the processing of the 'ndevices' and its associated allocated arrays in
'vshNodeDeviceListCollect' due to the possibility of returning -1 in a
call and using the returned value as a for loop index end condition.
Recent changes uncovered FORWARD_NULL and NEGATIVE_RETURNS problems with
the processing of the 'nActiveIfaces' and 'nInactiveIfaces' and their
associated allocated arrays in 'vshInterfaceListCollect' due to the
possibility of returning -1 in a call and using the return value as a
for loop index end condition.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Actually, I'm turning this function into a macro as filename,
function name and line number needs to be passed. The new
function virAsprintfInternal is introduced with the extended set
of arguments.
Free the old XML strings before overwriting them if the user
has chosen to reedit the file or force the redefinition.
Found by Alex Jia trying to reproduce another bug:
https://bugzilla.redhat.com/show_bug.cgi?id=977430#c3
Paolo Bonzini pointed out that it's actually possible to migrate a qemu
instance that was paused due to I/O error and it will be able to work on
the destination if the storage is accessible.
This patch introduces flag VIR_MIGRATE_ABORT_ON_ERROR that cancels the
migration in case an I/O error happens while it's being performed and
allows migration without this flag. This flag can be possibly used for
other error reasons that may be introduced in the future.
This patch fixes changes done in commit 29c1e913e4
that was pushed without implementing review feedback.
The flag introduced by the patch is changed to VIR_DOMAIN_VCPU_GUEST and
documentation makes the difference between regular hotplug and this new
functionality more explicit.
The virsh options that enable the use of the new flag are changed to
"--guest" and the documentation is fixed too.
This flag will allow to use qemu guest agent commands to disable
(offline) and enable (online) processors in a live guest that has the
guest agent running.
Our documentation says a pool may be referenced by its name or UUID
anywhere if it makes sense (pool-name and pool-uuid are the only
exceptions). However, vol-create and vol-create-as commands did not obey
this.
